Stuck Pull Cord on a Pressure Washer
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- This pressure washer had a stuck pull rope. Took a look at the pull rope assembly to see what was jammed or bent or broken.
How to Purchase our new Blade Balancer
hotshotpowereq...
HIPA Store
hipastore.idev...
Amazon Wish List Here!
www.amazon.com...
Amazon Tools & Parts
www.amazon.com...
I now have a Patreon account! Feel free to donate a dollar or two to keep my projects rolling out.
/ hotshotpowerequipment
Visit our website HotshotPowerEqu...
Visit us on Facebook @HotshotPowerEquipment
As an Amazon Associate I earn from qualifying purchases.
Make sure to play video at 2.0x. Thank me later
i have a power washer that locked up months ago, the pull rope refused to pull. I was thinking at first I was going to have to have the engine overhauled. but what I ended up doing was taking off the sparkplug, and trying to pull the starter, thinking maybe the motor was just hydrolocked. Still no go. Then squirted some WD-40 into the sparkplug hole, then undid the starter assembly which was held on by just 3 bolts. didn't have to take anything else off fortunately. once I got that off and determined the starter was ok, I used a 3/4 in socket to attempt to turn over the motor. Success. Put everything back together, and in 3 tries of the now free starter pull rope, it fired up. You could have heard me whoop and holler a mile away.
this weekend I pulled off the valve cover on my Honda motor for my pressure washer. Lots of oil came out. I pulled off the spark plug and the pullstarter, and noticed that the motor now turned over easily when turned with a wrench. Replaced the valve cover, drained the oil, replaced the oil with fresh 4 cycle oil. Then pulled off the carb, found that the insides were all gunked up with some kind of yellow gunk. Cleaned out the fuel bowl and float, sprayed WD40 on the movable parts. Put everything back together. after a few pulls, the motor caught and ran! Problem is now I found that the motor runs as long as the choke is in choke position, as soon as I put it into run, it quits. I checked the linkages and everything works correctly. I also tried running the pressure washer but it has no pressure. What besides replacing the pressure impeller could fix this?
That’s a DIY success story if I’ve ever heard one. Love a win for the regular guy, we don’t get them that often.
Wanna leave them springs alone by the look of your fingers 😂🏴
Machine should come with a new cover units
Hello from iraq this was helpfully
What is this video about? Dog fight? Weather? Bite? Recipe for cake?
I never run one with out water
I just pull pump and fix engine & install pump
Then connect water
Good video. Are you making any progress on the fuel tank for the tiller? Gotta love our Texas weather.
No progress yet. I got kind of busy and put it aside for a little while. I'm sure I can tackle it during the off season.
Rope looks short by 20 inches
Watch it at least at 1.5x ... video should have been 3 minutes, lol
Yes, please edit, remove unnecessary chatter
Just wait they will get tired
Please, keep to the point. No weather reports, dog fights, location info, etc. otherwise good video. Could have been 8 minutes
too much talking
Drags on about the weather and dog bites. Terrible video
How to pick up girls in a bar/club setting part 3
OMG! I couldn't finish it way too much talking.