How to Replace Front Brakes 09-13 Toyota RAV4

Buy Now!
New Brake Kit from 1AAuto.com 1aau.to/ia/1APB...
1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old brakes. This video is applicable to 09, 10, 11, 12, 13 Toyota RAV4
🔧 List of tools used:
• Pry Bar 1aau.to/oge/1AX...
• 17mm Wrench 1aau.to/omZ/1AX...
• 14mm Socket 1aau.to/oUp/1AX...
• 21mm Socket 1aau.to/ooN/1AX...
• 1/2 Inch Breaker Bar 1aau.to/oiR/1AX...
• Ratchet 1aau.to/o8v/1AX...
• Torque Wrench 1aau.to/oso/1AX...
• Brake Grease
• Cloth Rags 1aau.to/ogj/1AX...
• Hammer 1aau.to/oi9/1AX...
For More Info visit us at 1aau.to/h/bQj/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*

[@edwinoliveras8221]

Thank my friend fir this very helpful video. And thanks for not using loud background music, wich makes difficult understanding all the information. Your friend from Puerto Rico, Edwin

[@TC-bj8pu]

What size bolt did you use to pull
The rotor loose?

[@jeffersonfreed2716]

Recommend opening the bleeder when compressing the caliper to expel fluid out of the system in case it's contaminated so as not to damage the rest of the system with bad fluid.

[@waltp3373]

Those caliper pins came out way too easy. It must be a southern car.

[@OMGtheykilledKenny42]

ROFLMAO!

[@joeold9785]

I actually found out about you guys before I watched the video and got the drilled and slotted rotors and pads for my truck. Been on there for like 2ish 3ish weeks now and there absolutely amazing!!!!! Then I came across this video for my girl friends car. Thanks A1 auto!!!!

[@Darton-ok5xt]

what size of bolt that threat into the spot to push the rotor out

[@OMGtheykilledKenny42]

Just FYI that rotor is supposed to be on the driver's side. I have a pair of PowerStop Evolution Sport drilled & slotted rotors installed as such.

[@andyjohnson8161]

Do you not need to bleed the brakes every time you do this? If not, can someone explain when brakes need to be bled?

[@jacobgarcia48]

Can you put those tiny clip on the bottom instead on the top of the pad's ear. I just changed my brake pads but it didn't have those tiny clips. So I put them in the bottom. Idk if I should be concerned they are in the bottom.

[@1AAuto]

+Jacob Garcia Thanks for watching! You will want to install them just as we demonstrate in the video.

[@OMGtheykilledKenny42]

If you put them on the bottom, instead of squealing when braking, the clip will probably just be bent.

[@williamirizarry1113]

Two thumbs up 👍🏻

[@vinhle3272]

Where to buy that stick to tighten the wheel bolts?

[@BADD400]

Good video