Time for paint and final assembly of the tile plow. It looks awesome, but will it work?
ฝัง
- เผยแพร่เมื่อ 25 มี.ค. 2022
- shop Dirt Perfect
www.dirtperfect1.com/shop
Facebook
dirtperfect/...
Instagram
pCNzzDGKFL...
Ariat links
• Save 10% off your first order - ariat.dkkdet.net/c/2316545/69...
• Dirt Perfect's Favorites - ariat.dkkdet.net/c/2316545/85...
Final touches of the tile plow happening in the shop!
#tileplowbuild
#shopwork
#project
#welding
#850jdozer - บันเทิง
Started watching after you did several tile jobs. The track pad change popped up and I’ve been binge watching all these videos. You guys have created a masterpiece. Awesome job!
You guys are right to be proud of what you've achieved. To go from some drawings, some pieces of metal on the shop floor to the final fitting. Even if it don't work in the ground you've truly created a thing of beauty 😁😁.
Use pool noodles to pad the holes for your hoses.
It’s always a hoot when you and Arron hang out😂
What can I say guys? Wow, wow, wow!!!!!!!! Can't wait to see this mother in action. Well done to both of you - worked as a great team, as always !!!!!!!!
Thanks
Great job looks amazing! Really enjoyed Aaron being with you, he adds quite a lot to the humor of the videos aside from his skill level.
Thanks
Some of the best videos a dirt perfect and Arron that's for sure. They put out some great content. There's not very many channels that I will stop watching the video to go do something else and then come back and finish the video. But this channel I always come back to finish the video.
“The more paint the better the welds look”. That reminds me of my wood working skills. I always say i am a paint grade carpenter.
And when you guys were measuring 1/8” I was telling my wife “my tape doesn’t go below a 1/4, sometime 1/2 depending on how hangry i am”
Great work as always
Caulk helps too
@@chrishelms1967 ha!! I was going to say that too. I didn’t want to carry on too long! I am a firm believer any joint can be fixed by caulk and that good old fashioned structural paint
Caulk makes what the carpenter ain't...
caulk and putty…carpenters buddy!
That bar says; If you aren't this tall, you can't ride this ride!" LOL 😆 😆 😆 😆
Mike and Aaron, That is one incredible job on the tile plow that you both should be proud of showing off and telling people it is designed and made by you. Take care and God Bless.
Thanks
Can,t wait to see that 850 pull the Titanic through the dirt !!
What a Peach!!! Well done Perfect Fabricator, well done Sparky the Incandescent Particles Man!!! What a TEAM.👍👍👍👍👍👍👍👍
I'm 55, and have been an Industrial Mechanic for 35 years. And I'm sincerely impressed. I truly am. It looks absolutely 100% factory made. Very impressive.
Thank you
This is a well thought out and built piece of machinery!! The best part of these videos is how good, NO GREAT, you two get along! If I watched this for the first time, I would swear you two are loving brothers!! Can't wait to see it plow!!
Thanks
You need an Air Exchanger for all those paint fumes!!! Or open one of your big doors a bit...!! All that bad air will stunt Aaron's growth!!! 😏
Nice job on the Aar-Mike plow ... 👍
American ingenuity is alive and well along with the can do attitude. Great attachment I'm sure it'll work perfect
I believe this country was built by a bunch of yaahoos,hard working inventive and daring men.❤
Its nice. Should name it after Aaron. The plow behind the scenes
Well guys, I have absolutely loved watching you all build this plow . Because you both have made it look like a piece of art work and I really hope that it works and does the job that it was designed to do .
Only time will tell and I am anxious to see it in the ground . Thanks for taking us along on the build and you all be careful and stay safe and see you on the next video .
As always, Jeffrey !!! 🤗👍
Thanks
I'm something like 800 miles from you, and six weeks in the future, but watching the painting, somehow the back of my neck feels sticky. Also made me happy seeing MBTS having to use two different size wrenches on those identical looking connections on top, since I was thinking I was the only one who could have four hoses and need seven different wrenches fo turn the eight connectors. Looks good enough that you may have to make a few more next winter, I think you may get some requests from some folks who want one like it. Very nice.
New name for your dozer. The green Ripper.
With all the work MBTS put into this, I think he should be there for its inaugural dirt turning. Of course we want to be there by the wonders of video. Really a thing of engineering and fabricating beauty.
I’ve only got three words for you and the man behind the scenes “Oh Hell Yea!”
Editing skills are awesome! To be able to hide the "professionals" that actually built that thing, is great! Lol
Kidding aside, GREAT job guys! Need to put a dirt perfect serial tag on it....
Thanks
DP you and MBTS have the right to be happy on what you have achieved
Should have painted it hot fluorescent pink and named it 'The Big Pink Elephant'. 😁
The 30in track pads look awesome on that machine. Reminds me of a SnowCat.
Well-deserved patch your self on the back because it is a masterpiece! I don’t have any doubts that it will perform the way you want it to!
My ocd has kicked in and you may want some green paint on the ripper where the ripper claws go through the bracket. The yellow shows. As I have said before, what a piece of art!!
DP & MBTS, y'all did a fabulous job on the plow. Can't wait to see it in the ground. Thanks for sharing this project👍👍👍👍👍😺🤗🐺
Thanks
that 850J is starting to look so good, Jerry may feel a little trouble being true to his first love.
What a grin you two had at the end....and well deserved. Was ready to do a shot of CROWN, but will wait till it plows Mother Earth....
Y’all should be excited!! What an amazing job, concept to creation!! 👍👍😎🇺🇸🇺🇸
Ms. Jenna says its pretty, it also has sparkly grease. It needs dirt rubbed on it as fast as possible
Hi from uk Mike and crews👋👍 well now we are here am goin to say massive well done to you guys 👌💪👏👏👏 you should be proud of this accomplishment man looks great in colour too cant wait to see it plough and plunge pipe to the depths of earth that is required👌💪 thanks for bringing us along with you too and thanks for your time be safe and see you soon guys👍👋
Guy’s it looks mean even if it doesn’t work , but I believe it will. Awesome job guys.
Beautiful piece of art guys! Will be fun to see it buried in the dirt. Congratulations!
I would have primed that bare metal before painting, I just hope it adheres well, you have many man hours invested in that implement & I have enjoyed watching the evolution for sure.
Looks like a high quality piece of equipment for sure!
I would have used epoxy primer.
@@HorsleyLandy88 At the ship yard we used zinc oxide paint on bare metal but it was sometimes hard to paint over.
@@dansbrown1313 Epoxy primer is very durable, better than red oxide. That is why car restoration guys use it. And is very widely used in the marine environment.
Why think about it
All painted up and everything hooked together and pinned in place, plow looks professional. Can't wait to see you take her for a spin and see how she works
Really turned out awesome 👌 👏 😎 🙌 😀 👍. Operated as smooth as a babies behind.
Awesome job, so you need to name the plow and the j in 850j, should be "Jammin" jammin 8" pipe !!!! I watched this project from start to finish and you did a awesome job with all the planning and I can't wait to see it in action !!!!!
An idea is to add ball valves at the bracket for the hoses so that you can lock the cylinders in place when you take the plate and hoses off of the dozer. Will make life a lot easier.
No need
@@DirtPerfect Well, it will be interesting to see how you do or have worked around it! I know these videos are probably a bit behind. I just know open lines to hydraulic cylinders when taking off an attachment can make quite a mess and cost a lot in oil. LOL. I am curious how you will hold the cylinders in place as it comes off in the future. Unless of course it will live there forever now!
Great job Mike. Looks better than store bought. Can't wait to see it get dirty.
I don't know what's more beautiful, the finished plow or you and Aaron's excitement. Either way, I was caught up in all the excitement !
I was welding in my shop tonight.....and felt MBS presence.......that was about the time I realized there was shop towel on fire in the floor...... :-)
Hey, HOLLYWOOD! Very exciting video for me. Followed all the construction vids and it was suspense filled. A bulldozer and big truck driver was successful in imitating an artist and engineer putting it all together……. Shrug. Hope it does your job in the field, too. Can’t wait to see. Beautiful work.
You guys nailed it. Proud like a father watching his son throw the winning touchdown. Now, again, how do get AMI merch? lol
I've watched a few of these videos on the tile plow but until this 1 I didn't realize how MASSIVE this thing is. I have this cartoon picture in my head of y'all driving this thing in a permanent wheelie! lol
Thanks
Awesome job gentlemen looks real good. After seeing the finished part 1 now yawl can start part 2. Just add a trailer hitch and build a trailer to hold the rolls of tile!
If it were mine, I would paint the part of the boot that slides with graphite paint (EZ Slide). That would help to keep mud from wedging between the boot and the mounting box. Look real good.
She’s a real beaut Clark!
Can’t wait to see it in the dirt.
Thanks
The plow looks awesome. I’m sure it will work just as well.
Mike,that plow is a sight of beauty
Hey mike,you going to reviel cost at some point,ive watched the prossess,awsome ingenuity
I remember watching you lay tile with an excavator last fall at Farmer Chris's and thinking you needed something like this (didn't expect for an 850J though). Saw it being used with the lasers and auto grade and now watching the build parts. You guys did an awesome job on a big DIY project.
This has been a very good journey watching you guys building the tile plow now i get to watch the final product cool 👍😎🇺🇸NY
The amount of welding that your Hobart mig has done is amazing! That thing is a little beast
It is been a very good welder
Wwell done, what two "guys" had in their mind is now completed!!
I like the fine finish you put on a dozer. The hose holes are spectacular.
Its a gem! No bout a doubt it.
Good video Man that thing looks good Looks like a monster dozer good good job y’all to I know it will work good paint job my friend I cannot wait to see it go in the dirt it was Real good to you see Aaron back on the video and I really like his channel on TH-cam I like the old Chevrolet truck he is working on That is a fantastic job on the tile plow I mean it it looks so good my friend you got I right to be excited that smile on your face said it all y’all to be safe and have a good day
Aaron you are gonna look so pretty with that glitter butterfly trap stamp! Lol
Kudos to all, from you and Aaron to the fabricators, parts suppliers, slave labor (kiddos), etc! FANTASTIC BUILD!!! Actually watching this build first every night vice my normal schedule of watching Chris (LD18) first. 😆
Great job! Man behind the scenes burn some wire. Looks great!
Very nice looking you all did a fantastic job on it... Now you got to make a spendle for the top of the cab Of the dozer Wear you can put a whole row of plastic pipe on top of dozer and let it feed into your new plow
Great job now Gunner will have to repaint when takes over!!! 👏👏👏👍👍👍🇩🇰
Need a Dirt Perfect Engineering Sticker and Patent Pending sticker now. Looks great hope it all works as well as it looks.
Hey DP ya'll should have built a giant static chamber and UV hardening chamber then powder coated everything. 😁😁😁 Kermit is so proud of you. Ya'll are so proud you remind me of the "Portal" video game ending credits song "Still Alive" by Jonathon Coulton. I have modified the first verse or two for you.
This was a triumph.
I'm making a note here:
huge success.
It's hard to overstate
My satisfaction.
DP Engineering.
We do what we must
Because we can.
For the good of all of us.
Except the ones who are dead.
But there's no sense crying
Over every mistake.
You just keep on trying
Till you run out of cake.
And the engineering gets done.
And you make a neat plow.
For the people who are
Still alive.
Youre like a Giddy Kipper Mr DP !! LOL - I know the feeling !!- You sure can be proud of that scheme !!
As expected I continue to be impressed with Mike and Aaron's handywork. Paint really sets it off. With the live podcast I am looking forward to seeing this in the dirt and the new laser system install. Great Series Mike!
Ahh figured you out...hire you to build a shed you build a house....hire for a pond you build me a lake...build a tractor attachment you build one that will open up a grand canyon...you my friend are on my list for a building project....Well done WELL DONE my friend !!!!
Aaron's joke about "paint making his welds look better" despite them being professional standard, reminded me that Matt from Diesel Creek sometimes says "a grinder and paint make me the welder I aint".
Man is that thing freaking cool huh! Nice painting it the same color as the dozer, that bad boy looks like it came from the factory attached to the dozer. Alright, now it’s time for LT. Dan to get back in the shop and get finished up 😂.
What a tease!!!!! Lookin awesome boyz!!!!
Draw up all the plans with all the modifications make a deal with Clint at C&C and start building those per order on the days you can't work because of the weather
It's a thing of beauty and I love your paint color selection.
Done good guys. Crossing fingers for the huge ending!! 🤞👍
Great job, so awesome, happy for two hard working buddies.😊😊
Install set screws in the open holes on the back plate of tractor to keep debris out
Only thing I’d add is a strip of rubber on each side on the bottom of the chute thing to act as a wiper to keep the dirt out. Other than that this thing is pretty badass.
Good job guys. I can't wait to see that thing in the ground. Remember, this is Plow 1.0. Do your best to find the weak spots. By Plow 2.0 or 2.5, you'll have it bulletproof!! Good luck with it and DP, please don't forget the boots. I don't want to hear about smashed toes! :)
Awesome job y’all MBTS I think it needs a almost Dirt Perfect sticker on it
Dirt (Aaron) Perfect. Great job guys. 👍👍
That thing sure looks menacing. Will it work ?
Can't wait to see it rippin' !
You Both can be Proud !! Very Professional job Fellas
I have a suggestion for you about your plow. I would recommend machining a socket to hold a seal in the ends of your rollers that guide the plow up and down. The reason why is to stop dirt from getting in between the pin and the roller. If you look at your Volvo you will find them at the bottom of the stick for the bucket pins. You have to make the grove about .030 deeper than the end of the pin so they don’t rub and you have to install them in backwards so the grease can get out and the dirt can’t get in. It will definitely make everything last longer being they will most likely be in a lot of dirt. Sorry I didn’t think of it before you had the rollers greased. Just a suggestion but it does work to keep dirt out. Looking very good so far and I’m waiting to see it in the ground.
0 concerns about that stay tuned
Here to the hardest working saw horses on TH-cam!
No green paint for the Hydraulic tubes?
Thye impressed me more than the new design. And they are only made of wood.
You'll did one fine job on that. Now you need to get Lt. Dann back in the shop . Spring is popping out so you will need Of. Dann really soon.
Thanks
I liked the close up shot of the empty fire putter outer bracket. Fishing for more comments. 😉🤣
It look's heavy Duty guy's can't wait to see it break ground.
I wish I could paint or decal. I get so mad at myself when I paint. Had some custom light brackets for a dump truck and I pooched it up. I don’t think it will rust but I know there are runs. Really turned out great. I finally found MBTS channel and subscribed.
Turned Out Awesome!
You Guy's Do Amazing Work And Have Fun While At It!
Lookin Forward To LT Dan Coming Back Into The Shop & Getting Field Ready!
Thanks
Looks like a Binks Pot!Painted half the paper Mill in Hawesville with one!
The smiles on your and Aaron's faces is like being a kid and getting a new bike for Christmas. You two did a great job. The plow is something to be so proud off. Can't wait to see it work.
Wow you TWO guys did a cracking job congratulations to you BOTH 👍👍👍👍👍😂😂
Would you just look at that.PERFECT!!!
Looking forward to seeing that beast in action! Great job.
Old School - love it.
And a lubeoligist. We need more of you.
applaud... Can't wait to see it in action. thanks Arron -> you rock!
Looking good guys even the paint 😁
Thanks buddy
I know this is a bit late since you have your appendage painted such a nice sh*t brindle green as my Daddy likes to call “Army Green” but have you considered some “hard face welding” going across and around at the very least the cutting edge of the plow and the bottom and sides of the “foot” of the plow and possibly the truck of it especially since you made it out of mild steel. One other idea you may or may not want to consider is getting a sheet of thin flexible durable plastic and cut out circles to be slightly larger than you pin rollers to act as washer between the roller and the housing to help prevent galling of the roller and the housing as well as acting as sorta seal to help prevent the egress of crud, corruption, and dirt into roller/pin. Lastly for style points have you consider getting your local machine shop or Clint to cut out your logo in 10 gauge sheet metal and then either drill a holes in it appropriate places and weld short pieces of threaded rod or machine screws to it and paint or powder coat them Black and mount them on your equipment instead of using stickers to “brand” it. Additionally you could weld longish handle to one and use it as a stencil with spay paint to make things as yours on a job site as well as sell them on your website along with hats, hoodies, shirts, stickers, along with popcorn, peanuts, beef jerky, and autographed Pepsi cans. Ok maybe not popcorn, peanuts but Dirt Perfect beef jerky and Autographed Pepsi cans or at least can cozies and 24 to 32 ounce insulated drink cups they could be money makers or not.
Stay tuned
Shortening the vertical pin so it can be inserted from the top means that the load is now concentrated on one thickness of metal. The forces involved in plowing will tend to rotate the plow around the horizontal axis (viewed from the side). The one thickness may bend thed plate. The lonjger pin spread the bending action over the length or the old pin.
Stay tuned
Gunner my Man the future Dirt Perfict Jr.