I just ordered this for my car after watching this video. I'm kinda new in driving 🚘 and i need navigation to go from A to B and this product was cheaper with good reviews..
Thank you for the comment....the video was really an amateur one as i lack proper equipment.....but with the support from subscribers and views i will upgrade everything.... one last tip....be careful where you stick the metal piece (Square or round one) as it is very strong and i would recommend you stick it on a case instead on your phone directly....all the best
R.L. H. Thnk for the nice comment although it was my first video which was a complete mess...jst a small tip..like mentioned in several of my comments below....the square or round metal has a very strong glue so stick it on a bck cover and not on your phone directly...otherwise later if you ever decide to remove it...it will be really difficult and you have have to use a small screwdrivee which can scratch your phone...
Emiel3673 nop not that thin....i dnt think it will fit in your phone cover....and be careful the glue is very strong can damage your phone if you stick it directly..better put a case then stick it on it
I understand the magnet is good and strong, but how about the base that holds the magnet? I bought a really cheap version and put in my 69 mustang and the vibrations from the V8 engine made the phone tilt down after just a couple of seconds. I need something firm and sturdy! 🙂
Ingemar Gustafsson i think it depends on your phone as well....i am using an iphone 7 plus in my video and day to day driving to work...which is a quite large and heavy phone.... never tilted down so far and the magnet is strong...but unfortunately i am not able to test that on a V8 engine car 😅😅....otherwise...maybe a phone holder that is click and lock is better than a magnetic one...
@@ashr2717 I like the magnetic ones because they're not that intrusive when it comes to how they look on the dash. I'll try this one, they're still cheap! Thanks for the quick reply!
I don't understand what people crying about. When you wan't it to stick really good, you should clean the surface before you put it on. Surface should be clean and flat, stick it once and for good. If you stick it on greasy or on curved surface, or you try to remove it and stick on other place there can be no surprise why it fall off. Mine is working well 3 years already, doesnt matter if there is winter and -25, or summer and 60* inside car.
stravinsky960 ohhh ok....then buy a phone holder for your phone / tablet on your table....or a finger ring which you can stick on the back of your phone which works as a stand as well.. Like this one gearbest.app.link/Lk5XZqQvBN
punjabiexplorer hi, i am using an iphone 7 plus which is large....the magnet is strong and will never get off no matter the road and if you are using the middle part of the phone....but if you press the extremities of the phone it will get off...as the magnet is small and round...and this problem is in most magnet holder
Simon Z. Hmmm the kenu airframe can easily get loose and fall when you are in a bump...or drastic break... depending on the weight size of your phone...but this one is more stable...the only disadvantage is the 2 metals you received is very difficult to remove from your phone...so jst stick it on a case/backcover...
Eelke Keem the glue to the metal sticker is really strong...the problem will be when you want to change the back cover the sticker will be a bit difficult to remove and once remove the sticker wnt stick again and useless...
You don't need to rotate the ball, you rotate the phone! The ball/mount remains stationary unless you REALLY want to push it, and that's a good thing. Then it won't sag with gravity.
I just ordered this for my car after watching this video. I'm kinda new in driving 🚘 and i need navigation to go from A to B and this product was cheaper with good reviews..
Thank you for the comment....the video was really an amateur one as i lack proper equipment.....but with the support from subscribers and views i will upgrade everything.... one last tip....be careful where you stick the metal piece (Square or round one) as it is very strong and i would recommend you stick it on a case instead on your phone directly....all the best
is it okay if i stick the metal piece inside the case ?
awii xo yes but....but it will be weaker when holding the phone...tried it as well...better on the back not inside
Ash R all right, thanks for the heads up
Thanks for showing this man. I just bought one of these on eBay. It's good to know what to expect.
R.L. H. Thnk for the nice comment although it was my first video which was a complete mess...jst a small tip..like mentioned in several of my comments below....the square or round metal has a very strong glue so stick it on a bck cover and not on your phone directly...otherwise later if you ever decide to remove it...it will be really difficult and you have have to use a small screwdrivee which can scratch your phone...
@@ashr2717 wow screwdrive? You have to heaten it first, then it wil be easier to remove.
What is the thickness of the metal plate? I'm wondering if it would fit behind the battery cover of my phone because I'm not using a case.
Emiel3673 nop not that thin....i dnt think it will fit in your phone cover....and be careful the glue is very strong can damage your phone if you stick it directly..better put a case then stick it on it
Esse quê está mostrando agora na trepidações não corre risco de cair ?
Gloria Parreira english or french plz ? :/
Rsrs, vai Brasil!
How did you stick the mount on uneven surface ?
celiactrunc celiactrunc wouldnt recommend sticking on un-even surface :/ ...
I understand the magnet is good and strong, but how about the base that holds the magnet? I bought a really cheap version and put in my 69 mustang and the vibrations from the V8 engine made the phone tilt down after just a couple of seconds. I need something firm and sturdy! 🙂
Ingemar Gustafsson i think it depends on your phone as well....i am using an iphone 7 plus in my video and day to day driving to work...which is a quite large and heavy phone.... never tilted down so far and the magnet is strong...but unfortunately i am not able to test that on a V8 engine car 😅😅....otherwise...maybe a phone holder that is click and lock is better than a magnetic one...
@@ashr2717 I like the magnetic ones because they're not that intrusive when it comes to how they look on the dash. I'll try this one, they're still cheap! Thanks for the quick reply!
I don't understand what people crying about. When you wan't it to stick really good, you should clean the surface before you put it on. Surface should be clean and flat, stick it once and for good. If you stick it on greasy or on curved surface, or you try to remove it and stick on other place there can be no surprise why it fall off. Mine is working well 3 years already, doesnt matter if there is winter and -25, or summer and 60* inside car.
Did this damage the car when I put it directly onto it ? I mean this magnetic thing
Reem Albarqi still in my car...didnt rmove it...
Can I use it for a scooter, plz reply
Goutami Pappu won’t recommend it for a scooter
What is the purpose of the yellow sticky labels ???
piyaji840 plastic sticker.....if you dnt want to stick the metal directly on the bck of your phone
@@ashr2717 Thanks bud , after watching your I ordered 2 from the gearbest site
Can this be used with a case?
Is this good for watching and playing games?
stravinsky960 i wnt recommend doing that while driving....better you get a phone holder to use home anywhere...
I don't drive since I'm still 13 years old
stravinsky960 ohhh ok....then buy a phone holder for your phone / tablet on your table....or a finger ring which you can stick on the back of your phone which works as a stand as well..
Like this one
gearbest.app.link/Lk5XZqQvBN
Is the mount strong enough for large phones like Samsung galaxy Note 8.... Will the phone wiggle on it?
punjabiexplorer hi, i am using an iphone 7 plus which is large....the magnet is strong and will never get off no matter the road and if you are using the middle part of the phone....but if you press the extremities of the phone it will get off...as the magnet is small and round...and this problem is in most magnet holder
Thank you a lot.
Does it reduce battery life ??
MMA lithium ion battery is not affected by magnet as such so did not see any effect pr damage to my battery
Where did u buy it from? AliExpress?
Truthinmind7890 nop i bought it from Gearbest. link in description
this one or a kenu airframe without magnet? ;) thanks
Simon Z. Hmmm the kenu airframe can easily get loose and fall when you are in a bump...or drastic break... depending on the weight size of your phone...but this one is more stable...the only disadvantage is the 2 metals you received is very difficult to remove from your phone...so jst stick it on a case/backcover...
I have got a hard cover on my iphone X. Can i attach the sticker to the back of the cover of the iPhone? Will it stick and not fall off?
Kind regards
Eelke Keem the glue to the metal sticker is really strong...the problem will be when you want to change the back cover the sticker will be a bit difficult to remove and once remove the sticker wnt stick again and useless...
Ash R Alright thanks. I have ordered one!
Does the magnet affect the sensor in your phone?
Dicky Pratama nops...not at all...the magnet is in the middle at the back....so far all my calls/sms are working fine...
I feel something wrong with my gps after 1 month usage..
Anyone know where to find these in Australia?
eBay
of course a magnet will stick to a magnet??? the problem is the adhesive wont stick?????
Buen video amigo sigue así.
Alguien me puede decir como pegar esta mierda a la guantera del coche
Similar video to learn more about the product: th-cam.com/video/4LxK0gIJocU/w-d-xo.html
Hey there Ash R, how can we get in touch with you via email or phone number?
DesireBox email address : arvi194@gmail.com
Rubbish product doesn't stay on long to dashboard and hard to rotate as ball is to tight.
You don't need to rotate the ball, you rotate the phone! The ball/mount remains stationary unless you REALLY want to push it, and that's a good thing. Then it won't sag with gravity.
Cuanto vale