I will now be disappointed whenever there's a SG video without a never-been-seen-before (by me) tool. Absolutely love that Matt and Jim are not only amassing a great collection of vintage specialty shop tools, but using them as well. Big respect!
Oh yeah! The arrangement of months and days repeats from time to time too so you coud actually have a calendar from 1933 or so that would be accurate for 2023. Edit: a previous commenter says 1939 would match up with 2023.
I must say that the glass half full, can-do attitude of Strong's is the perfect anti-matter to the equally attractive dark humor over at Cold War Motors. The ying & yang of the two operations are perfect for each other. You've got your sun and light with Matt & Jim, and hot boxing under leaden skies at Scott's. Add in the manly metal working at Carter's, and we get to watch old, new world crafting at its best!
Agreed, I find it remarkable that most of the car modifcation/fabrication videos I watch are all Canadian. To add to them are Fitzee's Fabrications, Make it Kustom, and Speed Academy. Just great friendly attitudes and excellent skills.
I'm really impressed at all the speciality tools you guys have been able to aquire. It's fantastic to watch this stuff get repaired on the original equipment!
Matt and Jim, what a satisfying episode of old school tech! I haven't seen anyone re-arc the shoes after a drum clean up in at least 55 years! You guys are master mechanics of the very old school. Nice to see a 90+ year old being reborn with a drop! Thanks for the great video! Happy New Year!
Oh, yeah! I remember riveting linings onto the brake shoes of my 1940 Plymouth with a little gizmo from J.C. Whitney, back in the day! All the tool esoterica is both nostalgic and new at the same time.
Hey, I'm 68 and I've been collecting T parts here and there. My dream is to put together a speedster. Every now and then I've hit a local auction where there've been parts for just no money at all. The last one I went to, I only had $15 to my name that day but there was a whole pallet of T parts that I got for $10. I've got my eye on an engine at an upcoming auction. Model A parts seem a little easier to find but I've avoided temptation so far. Well, I did get an A transmission because it was in the same lot as some T wire wheels, all for $30. I sold the transmission for $80. Apperently, the gear for 1st gear is often worn out because people tried to jam it into first before stopping. Go for it!
All wallered out from years of heavy road wallering... I guess that's Jimeese for: Many years of riding on bumpy Alberta roads. 😆 Getting closer to that first ride Jim!
Enjoyed seeing how things used to be repaired instead of just replacing every thing with new out of the box parts. Jim and Matt are old souls living about 80 years too late.
Great video, guys! That's no Crutch, that's a Shop Aid! 😆 I probably would have run that original reamer back through the bushing holes at least 1 other time, maybe 2 more times. You only needed .001. I have gotten .001 by re-reaming. You got it done, that's all that matters. You got it done very well! Very well done! That is some fancy "Assembly Area" you've got there (referring to your colorful Floor Lift Cover 🤣), guys!😉. Thanks for your efforts, sincerely. This is an awesome channel!
Excellent work, Matt and Jim. Good quality and detailed Early Ford content is what the world needs. Thanks for showing all the little ins and outs when doing these jobs. Love all the period tooling too. It just doesn't get any better than this. Mart, an Early Ford guy from England.
I enjoyed this quality video. It was relaxing to watch you two calmly rebuild and work through the unexpected challenges that popped up... and all without power tools, just like they would have done when this vehicle was new. The Canadian accent was a bonus.
Incredible how even 100 years later aftermarket car companies still can't make parts that fit! You would think copying existing parts would be the easiest job in the world haha.
Back in '58, I got a Columbia bke wth blackwalls on it, and promptly purchased a can of whitewall paint for it. Of course, I seldom checked the air in the tires, so the white cracked an flaked off.
That'll be sweet once you drop the 428 Cobra with dual quads in it,or was this the Coyote swap?I kid.I know it's one of the Frankenstein's monsters...the flat headed thing.I've never seen brake shoes rebuilt.That was riveting.The kingpin segment wasn't boring either.I like Jim's idea of 'balanced tires' too...1 on each side.That episode was refreshing all around.Cheers!
Impressive job Boys. I don’t know anyone else who is using period correct tools and methods like you two do. Rescuing cars and tools from the scrapyard is respectable alone but restoring the cars with those same tools and methods is absolutely commendable!
My dream, working in an old shop with old tools on old cars... lucky SOB's! 😆 I guess you are an actual garage working on other customer's old cars too? All I think i have seen in your videos look to be your own cars, but gotta be other jobs to keep the lights on!
Thanks for making these videos on refurbishing a Model A. I've never seen one apart so it is very interesting to see how everything works together. Quality control on the replacement parts seems to be an afterthought or not even a thought. Looking forward to more in the series. Take care.
Jim has the classic Canadian understatement;.."This tire has an anomaly (points to a large hole in the smooth surface) ...in the tread" (there is no tread just smooth rubber) Love this!
Cool. So much easier to assemble those brakes on a bench than under the car. Glad to see you got the spindles on the correct sides eventually. I’m still curious about the brake actuators with the dropped axle.
Excellent job on adapting to the inaccuracies of the replacement steering parts. Can't remember seeing actual brake lining replacement before and haven't seen anyone turn a drum or rotor since the mid seventies.
I’m constantly surprised by the simplicity of the A and T and yet they are bulletproof and completely reliable and rebuild able. If you made a car like this today car companies would go out of business.
Man I love the old school stuff I know but damn that's really " Old School".that one guy with the bad foot aughta take a break and get healed up.... ;) 😉
My wife and i have 10 model AA Ford's made into tractors, after Veterans came home to farm. Double transmissions and chained up. Plus a Graham Brother's and Studebaker. Some military trucks from the 30's. Love you videos!
Another trick for the kingpin bushings that are a little too small is an adjustable roll burnisher. It will displace a tiny bit of metal in a hole upto a thousandth of an inch or so and leave a smoother finish in the bushing than just using a reamer. That Bear brake lathe looks just like the one I learned on in high school auto shop in the early 1970's. One of my classmates had a 1934 Ford pickup with a flathead V8 complete with Offenhauser aluminum heads and twin Holley 94 carbs and headers. You could always tell when Kim was anywhere in the area by the distinctive sound that "34 made.
Scott over at Cold war motors said that you guys have your own channel so I'm checking you out. It's great to see the old stuff being repaired and restored especially in the ways of our fathers and grandfathers with the old tools and equipment. When I was a kid a old timer taught me to use vegetable oil for assembling tires instead of soap or chemicals, it is a cheap way of doing it and works pretty well, and it doesn't cause the wheels to rust like soap does. Thank you for your videos Tim from Wisconsin.
boy did i fall back in time when i saw the center post lift going down, i enjoyed this video so much brings back so many memories. thanks guys, keep them coming.
Matt, Jim, love the show. The Model A is going to be so wicked with the drop axle. By the way, what is the fancy clock on the wall above the piece of machinery? Looks great. Cheers from Ohio
It always amazes me to see factory original anything that's 93 years old. But how does original paint survive that long on a brake drum in Saskatchewan?
The cycling community still carries tire "boots" since most of the tires used continue to be tubeless. I've used them to get home after a puncture far from home. Since bicycle tires are so light, the boot is made by cutting a section out of a used-up tire and removing the bead(s).🚲
When I lived in downtown Louisville back in the 80s, there was so much broken glass in the streets because people would sit on the front stoop drinking liquor and then toss the bottles in the street, I would get a flat tire any time I went out on my bike and end up walking it home. I got some super extra thick tires at K Mart and that kept me on the road for awhile. Good times!
Old bike tubes have so many uses; I bought a replacement remote for my '98 Olds 88, and it kept going off in my pocket, so I stretched a section of an old bike tube over it, and "Voila!"
In my diesel truck shop we used to reline our own brakes as well on a similar machine.. just a little bigger.. it have us many years of good service, even though it was pre WWII military machine..as was alot of our machines (lathe, mill, drill presses, etc)
The first time Id seen a walker mechanical jack was on your channel. I found one last week and bought it. Never seen one as old as these. I was also given a weaver auto twin recently.
That piece of a tire inside the other is what we did as a kid,when we had cut and holes in our bike tires,,we were kids we didn't have money for tires,,,love watching the neat find..and your front end rebuild,
Love the show, you guys have a special thing going.. your shop is amazing, have you ever been approached by moviemakers to have it in a scene? That would be cool.. cheers fellows..
May the Fords be with you!
I will now be disappointed whenever there's a SG video without a never-been-seen-before (by me) tool. Absolutely love that Matt and Jim are not only amassing a great collection of vintage specialty shop tools, but using them as well. Big respect!
Maybe someday an old fashioned type of calendar from Strong’s Garage. I’d buy one.
Oh yeah! The arrangement of months and days repeats from time to time too so you coud actually have a calendar from 1933 or so that would be accurate for 2023. Edit: a previous commenter says 1939 would match up with 2023.
I must say that the glass half full, can-do attitude of Strong's is the perfect anti-matter to the equally attractive dark humor over at Cold War Motors. The ying & yang of the two operations are perfect for each other. You've got your sun and light with Matt & Jim, and hot boxing under leaden skies at Scott's. Add in the manly metal working at Carter's, and we get to watch old, new world crafting at its best!
Yes, three of the best old vehicle sites on TH-cam!
Agreed, I find it remarkable that most of the car modifcation/fabrication videos I watch are all Canadian. To add to them are Fitzee's Fabrications, Make it Kustom, and Speed Academy. Just great friendly attitudes and excellent skills.
...and half-assed kustoms
Holy smokes!! Was that a magic carpet? Oh, now I see the post...had me for a few. Lol
Why you don't have a 100,000 subscription I don't know you are always entertaining and educational thank you 😊
A Strong Garage requirement is definitely to have nice balls 👍🏻
I tune in for the witty banter. Love the channel! Keep up the good work!
Matt and Jim puts out great video's
The Model A the car for the common man. One everyone could work on. Should be a sweet ride when finished. Love those old tools and machines.
Ya know, a calendar from 1939 matches up with 2023. That would be pretty cool...
I'm really impressed at all the speciality tools you guys have been able to aquire. It's fantastic to watch this stuff get repaired on the original equipment!
Matt and Jim, what a satisfying episode of old school tech! I haven't seen anyone re-arc the shoes after a drum clean up in at least 55 years! You guys are master mechanics of the very old school. Nice to see a 90+ year old being reborn with a drop! Thanks for the great video! Happy New Year!
Oh, yeah! I remember riveting linings onto the brake shoes of my 1940 Plymouth with a little gizmo from J.C. Whitney, back in the day! All the tool esoterica is both nostalgic and new at the same time.
So much fun to watch you guys working on an old Model A. I am 64 and my dream is to own a T or an A some day. Ya never know. Fun stuff,thanks guys!
Hey, I'm 68 and I've been collecting T parts here and there. My dream is to put together a speedster. Every now and then I've hit a local auction where there've been parts for just no money at all. The last one I went to, I only had $15 to my name that day but there was a whole pallet of T parts that I got for $10. I've got my eye on an engine at an upcoming auction. Model A parts seem a little easier to find but I've avoided temptation so far. Well, I did get an A transmission because it was in the same lot as some T wire wheels, all for $30. I sold the transmission for $80. Apperently, the gear for 1st gear is often worn out because people tried to jam it into first before stopping. Go for it!
Thx for sharing your skills and knowledge!
All wallered out from years of heavy road wallering... I guess that's Jimeese for: Many years of riding on bumpy Alberta roads. 😆 Getting closer to that first ride Jim!
@glennnickerson8438 - Imagine the stories that Model A could tell about the roads it has seen...
@@douglas_drew It would have probably said ouch a few times!😆
Save me that tire repair section! Man, that's handy... Cant wait to see the A come together, gentlemen!
Great job!
Every episode is better and better.
Your channel is real people,
Not a channel that the same words over and over.!
Gear Head🤖
The belting in the tire was called a boot in the 50's and was a common thing to add where there was damage.
Yup, had them in my old tractor tires, too.
@@mikeschotte9480 Whilst Running a workshop years ago,you could actually buy the repair boots.
Thanks for the info guys!
Enjoyed seeing how things used to be repaired instead of just replacing every thing with new out of the box parts. Jim and Matt are old souls living about 80 years too late.
Good episode
Great video, guys! That's no Crutch, that's a Shop Aid! 😆 I probably would have run that original reamer back through the bushing holes at least 1 other time, maybe 2 more times. You only needed .001. I have gotten .001 by re-reaming. You got it done, that's all that matters. You got it done very well! Very well done! That is some fancy "Assembly Area" you've got there (referring to your colorful Floor Lift Cover 🤣), guys!😉. Thanks for your efforts, sincerely. This is an awesome channel!
I love all the old tools and equipment you fellas are putting back to work.
You two and what you are doing are perfect in every way!
Way cool tools 🍻
The stylish mats are a nice touch to work on,beats an old fridge carton.
Smooth as silk guys!
Great content.🙂
nice reshaping and rebuild on your front end no more speed wobbles
That's a nice blanket that you're resting the axle on!
Good video thanks!
Cool calendar, we have turnof the century printing machines at work we still use and we also do letter press printing on Kluge presses
Like # lucky 13! Good episode, thanks. Nice to see the Continental is coming along. What a huge task. Model A is progressing.
Excellent work, Matt and Jim. Good quality and detailed Early Ford content is what the world needs. Thanks for showing all the little ins and outs when doing these jobs. Love all the period tooling too. It just doesn't get any better than this. Mart, an Early Ford guy from England.
Decent balls 🤣👌 that's pretty much how I'd describe mine these days. Mostly just decoration at this point.
Lol I hear ya!
Hi Jim and Matt. You know, I always used to tell people that I was a old-school Ford mechanic, but after watching your videos I realize I was wrong!
Good job my Canadian friends from the north keep up the good work
I enjoyed this quality video. It was relaxing to watch you two calmly rebuild and work through the unexpected challenges that popped up... and all without power tools, just like they would have done when this vehicle was new. The Canadian accent was a bonus.
Fantastic job guys
Incredible how even 100 years later aftermarket car companies still can't make parts that fit! You would think copying existing parts would be the easiest job in the world haha.
cotter pins are amazing, how tons of machinery is kept from falling apart by basicaly a bit of wire . . .
Very enjoyable build ! Cheers 🍻
Another riveting episode gents! Well done, cheers, Paul
Great job lads.. I really enjoy what you do. As an old geezer it brings back memories of busting knuckles in my driveway. Thank you
I was in love with those homemade painted whitewall tires. Sad to see them go.
Back in '58, I got a Columbia bke wth blackwalls on it, and promptly purchased a can of whitewall paint for it. Of course, I seldom checked the air in the tires, so the white cracked an flaked off.
That'll be sweet once you drop the 428 Cobra with dual quads in it,or was this the Coyote swap?I kid.I know it's one of the Frankenstein's monsters...the flat headed thing.I've never seen brake shoes rebuilt.That was riveting.The kingpin segment wasn't boring either.I like Jim's idea of 'balanced tires' too...1 on each side.That episode was refreshing all around.Cheers!
Terrific work gentleman!
Jim has been a busy guy appearing on Strong’s Garage and Cold War Motors in the same week.
Cheers!
Impressive job Boys. I don’t know anyone else who is using period correct tools and methods like you two do. Rescuing cars and tools from the scrapyard is respectable alone but restoring the cars with those same tools and methods is absolutely commendable!
My dream, working in an old shop with old tools on old cars... lucky SOB's! 😆 I guess you are an actual garage working on other customer's old cars too? All I think i have seen in your videos look to be your own cars, but gotta be other jobs to keep the lights on!
Remember don't throw those old tires away Scott will put them in his museum
Nice work, great, to see the cars and the machinery both being preserved
The best video yet !!!
Glad you guys found a use for that old rug!
The last set of brake pads I re-arched was back in 1981.
I like seeing all the old tools, l think of my grandfather B/A garage
Thanks for making these videos on refurbishing a Model A. I've never seen one apart so it is very interesting to see how everything works together. Quality control on the replacement parts seems to be an afterthought or not even a thought. Looking forward to more in the series. Take care.
love the old tools. I have used a few brings back old memories, or nightmares! thank you ALL stay safe
My car knowledge started in the 40's so this is all new stuff to me. Love it!
Jim has the classic Canadian understatement;.."This tire has an anomaly (points to a large hole in the smooth surface) ...in the tread" (there is no tread just smooth rubber) Love this!
Nice go! Thanks for the interesting content. Always learn something at Strong's Garage!
You guys are great. I love your attention to detail, nice work.
Cool. So much easier to assemble those brakes on a bench than under the car. Glad to see you got the spindles on the correct sides eventually. I’m still curious about the brake actuators with the dropped axle.
I thought Jim would do a juice break conversion being the dropped axle.
Job well done, fellas.
Love you guys!
So the secret to rebuilding a Model T front end is to put a Magic Flying Carpet under it. 23:48
Excellent job on adapting to the inaccuracies of the replacement steering parts. Can't remember seeing actual brake lining replacement before and haven't seen anyone turn a drum or rotor since the mid seventies.
It was reassuring to hear that Jim's front end has good balls. 😂
Fitted like a glove. An O.J. glove...
The .001 oversize- was that for worn bushings in the field?
Matt said: "... Jim's steering arm has nice balls" Okay, guys, good to know. At least I guess so. 😁 ;-)
Nice one boys..thx
Nice job on getting the front end together. It would be interesting to see how the brakes work on it. That was pretty ingenious.
Thanks guy's from down here in Kentucky Horse Country 🇺🇸
great channel and content guys.
I’m constantly surprised by the simplicity of the A and T and yet they are bulletproof and completely reliable and rebuild able. If you made a car like this today car companies would go out of business.
We’ll done gentlemen. So very inspirational to watch this TH-cam channel. Keep up the great work.
Man I love the old school stuff I know but damn that's really " Old School".that one guy with the bad foot aughta take a break and get healed up.... ;) 😉
Yay
My wife and i have 10 model AA Ford's made into tractors, after Veterans came home to farm. Double transmissions and chained up. Plus a Graham Brother's and Studebaker. Some military trucks from the 30's. Love you videos!
I would love to have that Antique floor jack!
NICE!!!
Another trick for the kingpin bushings that are a little too small is an adjustable roll burnisher. It will displace a tiny bit of metal in a hole upto a thousandth of an inch or so and leave a smoother finish in the bushing than just using a reamer. That Bear brake lathe looks just like the one I learned on in high school auto shop in the early 1970's. One of my classmates had a 1934 Ford pickup with a flathead V8 complete with Offenhauser aluminum heads and twin Holley 94 carbs and headers. You could always tell when Kim was anywhere in the area by the distinctive sound that "34 made.
Scott over at Cold war motors said that you guys have your own channel so I'm checking you out.
It's great to see the old stuff being repaired and restored especially in the ways of our fathers and grandfathers with the old tools and equipment.
When I was a kid a old timer taught me to use vegetable oil for assembling tires instead of soap or chemicals, it is a cheap way of doing it and works pretty well, and it doesn't cause the wheels to rust like soap does.
Thank you for your videos
Tim from Wisconsin.
Very well done!! Love the show …
boy did i fall back in time when i saw the center post lift going down, i enjoyed this video so much brings back so many memories. thanks guys, keep them coming.
Thanks for the video did a nice job on that front end have a great day and remember if it ain't got a metal bumper it ain't a real car
I thought there was some fancy artsy fartsy camera work a foot, you were just lowering the car lift. Lol
new tire and tubes, what about the flaps to go around the rim?
Matt, Jim, love the show. The Model A is going to be so wicked with the drop axle.
By the way, what is the fancy clock on the wall above the piece of machinery? Looks great. Cheers from Ohio
great show guys
I love the basic simplicity of these cars. Even my old VW Beetle is complex in comparison!
Enjoyed the video ! Also how long before Scott asks for the old tire for My Classic Tire .
cool to see your subscriptions are growing , and more folks are getting into Strong mans garage your content is getting more and more interesting.
It always amazes me to see factory original anything that's 93 years old. But how does original paint survive that long on a brake drum in Saskatchewan?
The cycling community still carries tire "boots" since most of the tires used continue to be tubeless. I've used them to get home after a puncture far from home. Since bicycle tires are so light, the boot is made by cutting a section out of a used-up tire and removing the bead(s).🚲
When I lived in downtown Louisville back in the 80s, there was so much broken glass in the streets because people would sit on the front stoop drinking liquor and then toss the bottles in the street, I would get a flat tire any time I went out on my bike and end up walking it home. I got some super extra thick tires at K Mart and that kept me on the road for awhile. Good times!
Old bike tubes have so many uses; I bought a replacement remote for my '98 Olds 88, and it kept going off in my pocket, so I stretched a section of an old bike tube over it, and "Voila!"
Err - "....to be tubeless." Meant to say "non-tubeless" -but you fellows got the intent 😃
In my diesel truck shop we used to reline our own brakes as well on a similar machine.. just a little bigger.. it have us many years of good service, even though it was pre WWII military machine..as was alot of our machines (lathe, mill, drill presses, etc)
The first time Id seen a walker mechanical jack was on your channel. I found one last week and bought it. Never seen one as old as these. I was also given a weaver auto twin recently.
That piece of a tire inside the other is what we did as a kid,when we had cut and holes in our bike tires,,we were kids we didn't have money for tires,,,love watching the neat find..and your front end rebuild,
Love the show, you guys have a special thing going.. your shop is amazing, have you ever been approached by moviemakers to have it in a scene? That would be cool.. cheers fellows..
Best video so far! Great editing and explanations 👍🏼🇨🇦