SURRON Clicking Noise Solved

In this video, I successfully troubleshoot the prevalent clicking noise in Surron bikes, a common issue represented by the hashtags #surronx, #surron, and #ebike. Initially, I suspected the clicking to originate from the jackshaft bearings, but a thorough inspection ruled that out. The true culprit was identified as the motor, a typical source of this noise in Surron bikes.
My Surron, with around 1600 miles and exposure to wet conditions, exhibited rust accumulation in the motor, contributing to the clicking sound. The resolution is presented, offering valuable insights for Surron enthusiasts dealing with similar challenges.
My most recent video
TC500 installation video: • Surron X TC500 Control...
Get the TC500 controller here: webshop.torpmotors.com/produc...
Special thanks to Torp Motors for sending this incredible kit all the way from Croatia. Give them a follow here: @torpmotors1910
👍 Enjoyed the video? Please ‘Like’, ‘Subscribe’, and ring that notification bell to never miss an update for more upcoming Surron content and upgrade videos. UP NEXT 220mm Brake rotor upgrade.
surronshop.world/
💡 Use Code 'ADAMESPO' for an exclusive 10% discount on any item at SurronShop!
Here are some of my Amazon affiliate links for upgrades i have on my Surron! Any earnings go directly back to the channel
Jackshaft removal tool: amzn.to/49F8a9f
Hart Impact drill: amzn.to/40W99hi
JFG Racing Pegs: amzn.to/3QIDqe7
JFG Handle Bars: amzn.to/3H6oYJJ
Mud guard: amzn.to/40igOpw
Shimano Brake pads: amzn.to/3H6A69v
Shinko 244 Series Rear/Front Tire: amzn.to/3IZ84hs
Bike Alarm: amzn.to/3CRnfFE
Magura MT5: amzn.to/49vjDrM
Mirrors: amzn.to/46ec0D0
SPConnect Phone Mount: sp-connect.com/
Discount code: ADAMESPOSITO9515OFF

[@nomadicoasis9260]

I just changed my Jack shaft bearings, swing arm bearings, and repacked the roller bearings in the rear shock assembly last week. 6400km. on gravel roads... the Jack shaft bearings were making noise and were dry and ugly. the swing arm bearings had rust on the chain side as it gets more splatter from the chain, also were partly frozen. one of the roller bearings was seized and was polishing the sleeve inside the bearing. seams maintenance was over due... the belt was in great shape to my suprize...
I wonder if the grinding in the motor you describe is actually the cogging of the roter against the permanent magnets? if you spin the wheel you can feel the stop start thing...

[@LarryRichelli]

Boy, I ever have to do this I am buying the upgraded jackshaft with the grease fitting.

[@ccfpv]

Yo, what seat/bodypanels are those and where can i get em?

[@AdamEspositoYT]

They’re the 4M Foundry plastic kit. You get it here. Use my code for a discount! ADAMESPO: surronshop.world/products/4mf-moto-kit-for-sur-ron-segway?_pos=2&_psq=4m&_ss=e&_v=1.0

[@ccfpv]

@@AdamEspositoYT thank you very much :D sadly it costs ~380$ in shipping alone 😪

[@AdamEspositoYT]

@@ccfpv you’re welcome my friend. Ya… I’d suggest scouting some other sellers online if you can. See what the difference is. But my codes good for their whole store 🤙🏻

[@badger_1648]

with this problem did your light flicker or lose power ?

[@dustyjohansen7170]

2:20 That was so scary

[@Kingmohammed23]

mine has been doing it since it was brand new though?

[@AdamEspositoYT]

To be honest, maybe they just make that noise? I haven’t had mine since brand new. So I can’t compare. I think mines got rust buildup inside a little. Either way imma end up upgrading it too

[@ridlaridlidouzou]

It stared happening to me after 1,5 years, it's making me crazy. I really considering just selling this Chinese crap, maybe switching to talaria sting.@@AdamEspositoYT

[@sasmayte]

So what was wrong?

[@AdamEspositoYT]

I think it’s the motor

[@sasmayte]

@@AdamEspositoYT fairs man I had a similar thing and it was the jackshaft bearings

[@Halal_MediaYT]

First lol😊