Connecting Monoprice Select Mini 3D Printer To WiFi The Easy Way!

This is the easiest method at this time!
Code is below just in case your not able to find the actual gcode file for some reason you can copy and paste the text below to a text file using any text editor such as notepad.
; G-Code generated by Matthew Upp
; WiFi SSID & Password for Malyan M200 & MP Select Mini
;
; Look below and replace "SSID" with the name of your WiFi network - don't leave spaces after the SSID name
; Look below and replace "PASSWORD" with the password for your WiFi network - don't leave spaces after the password
; This method will not work if WiFi password contains a semicolon ";"
; This method will not work for configuring open system WiFi networks with no password
; Lines with only a semicolon are for making line separations only
; Ensure there is a blank line at the end of the file while editing. G-code files should end with a single blank line at the end.
;
;
M106 S0 ; turn fan off in case it was already on
M106 S200 ; turn fan on to signify start
G28 X Y ; home X & Y
;
;
M550 SSID
M551 PASSWORD
;
;
G1 X60 Y60 F1000 ; CENTER bed to signify completion
M106 S0 ; turn fan to signify completion
M84 ; disable motors

[@adoolaard]

Thanks, the other apps aren't available anymore. This is the only (simple) solution i could find, and it actually worked! Thanks a lot!

[@wildturkey1726]

MonoPrice no longer has a supported App and they couldn't recommend a 3rd party App. After failing with several 3rd party Apps I came across your video. It worked Great! Really wish Monoprice would have included your instructions on there SD card. Thanks so much!

[@WeaverFamilyFarms]

Thanks! 😀

[@curiosity2314]

Yeah it did, dug mine out of the dust to print a cover for a doorbell and this brings back all the memories of setting this up at the time.

[@WeaverFamilyFarms]

They are nice

[@guigui89894]

Thanks man! Great tutorial.

[@WeaverFamilyFarms]

Your welcome

[@countjuggula1572]

Great tutorial. Wont work with my printer though so i guess i will have to stick with the SD and usb options

[@marcames2377]

It's reall6 close to done but is taking a long time.
What to do??

[@WeaverFamilyFarms]

Try to do it all over again is the best. Power down then retry

[@arthurragan1332]

Where can i get this file? Website is no longer available

[@WeaverFamilyFarms]

Sorry!! Which file do you mean

[@marcames2377]

*really