I have been worked in various roles in the building industry for over 50 years and can personally vouch for Soudal wall glues. I have used it to fix fibre cement cladding (weather board) onto rough hand made brickwork with raked joints. Once on it never moves. Tested first with one piece approx 1 metre long x 170mm wide. Three large blobs pressed on for about 10 seconds. Came back about 10 mins later. No sag and I could not pull it off by hand. Levered it off with a crowbar. The glue did not seperate but the fibre cement board peeled at two glue points and the face of the brick came away at the third.. Clad walls in similar fashion over three metres high without pause with no movement at the rime and since. Amazing product that does what it says it on the lable unlike others I have tried and failed as demonstrated in this video.
Excellent video. You have to wiggle the timber to spread the sealant! Lol common sense! As a carpenter/aluminum joiner? You do the same thing with Sikaflex
I have been worked in various roles in the building industry for over 50 years and can personally vouch for Soudal wall glues.
I have used it to fix fibre cement cladding (weather board) onto rough hand made brickwork with raked joints. Once on it never moves.
Tested first with one piece approx 1 metre long x 170mm wide. Three large blobs pressed on for about 10 seconds.
Came back about 10 mins later. No sag and I could not pull it off by hand.
Levered it off with a crowbar. The glue did not seperate but the fibre cement board peeled at two glue points and the face of the brick came away at the third..
Clad walls in similar fashion over three metres high without pause with no movement at the rime and since.
Amazing product that does what it says it on the lable unlike others I have tried and failed as demonstrated in this video.
Maybe don't wiggle the others so they fall while with yours you just press
Excellent video. You have to wiggle the timber to spread the sealant! Lol common sense! As a carpenter/aluminum joiner? You do the same thing with Sikaflex
Which one can I put on my apartment wall to make paneling that can come off when I’m ready to move?
Do you need special gun for this? I imagine it the higher the tack, the harder it is to extrude
You need to put silicone in a Zig Zag line
You wiggled 2 and 4 intentionally too much so they lose the initial bond and fall down
He made number 2 fall down on purpose 😄
Without telling the viewer what the other brands were, you could have easily just made them fail by making adhesive that doesnt work
Less adhesive was put on 2,3 and 4 watch when he applies
it was OK
Just demo your product instead of countdown
Could be toothpaste in the other tubes for all we know... Horrible piece of advertising.
You was wiggling the others, hardly a fair test