Love Harley Davidson. Can't afford em though. I'm building a old ass GoldWing. A 1983 Aspencade. One day I'll own a R.G. limited. I'm two years away from being able to purchase. That's when the ol car payment will be gone. Looking at 2015 or newer. For now. The 83 gets the nod. Purchase of the bike and all the crap I'm doing I'll end up having 3k in it. Not including the cost of my time. Bought non running. It now runs idle and stops. Next is paint gotta wait till spring. Doing a two tone harley-esk paint scheme in green and black
ProMonk, there is nobody more naturally funny than you on TH-cam.. That part about the wiring and Leesburg I almost spit out my lunch so funny. Great job 😄🤙🏻
When I had to replace my battery on my Indian Roadmaster, i know, its and Indian, I left the ECM connected but put in a Crown Royal bag. Gave me insurance against a very expense mistake.
Monkey - love your videos. It’s the fact that you do “walk through, talk through and wrench through” that make them so awesome. I don’t know what the Racer Boy theme is for baggers, but you have me interested and researching. Keep up the great work!
Ok,on the oil issue at air cleaner. Since installing cam,you have increased need to balance air flow in engine cases. The trask trans top vent would an excellent choice. Also, very important, M8 engines when modified prefer to be happy when oil level on dip stick is about 1/2 quart low. Trust me, it will help with air cleaner bleeding oil. Enjoy.
I did that light bar setup on my bike back in 2017 when I bought my road glide. I got the white light bar from eBay for 16 bucks. I posted it on the road glide FB page and had a bunch of people asking me how I did it. I should have gotten a patent🤣
Well I’m sure you have an idea of how to fix the oil dealio DK custom products have what they call a transformer mount and air cleaner that is what I used after some other failed attempts
Nice video and nice light, but the wiring... Choose an accessory switch kit from Harley, install a switch on the dash instead of the blank-plates. Tip for a new video. :-)
Pro-Monkey you should take the wheels out and get them powder coated Red to match the Windscreen. It would look bad arse, and you should also get the beauty rings on the engine heads done the same color. Just Saying…
What kind of seat cushion do you have laying their by your seat? I have an Air Hauck I just love. In my 3000 mile's one way to Sturgis my butt couldn't take it anylonger. Soooo the seat cushion added 2-300 miles a day farther. I'll do between 6-800 miles a day now at 69 yrs old. You do the math. I say best $100 I ever spent. I tried jel cushions but hated them.
@@ProfessionalMonkey that’s great to hear! I live out in the woods so riding home in the dark on gravel roads I need good lighting! Thank you very much for getting back to me! I’ll be ordering in the morning!
Great video, love your content. Just sayin for this and what I saw... Phase add a shift linkage (solid black) Also, I feel that spot under the frame for the new light switch will get so f'n hot and melt any adhesive. My thought was to utilize one of the dummy buttons on the top tree. ✌
😂😂youre such a dork....but great video and idea for my sons bike. Only issue I have is the bracket covers the adjuster for the headlight but thats ok. How many times would you adjust the damn thing!!! Merry Christmas to you and yours brother.
@@ProfessionalMonkey oh, I thought it was a couple years old because I saw the vents in the headlight bucket, I thought they discontinued that 3/4 years ago? I had one. I sure miss it. I love the outside look real bad, but love the inside cockpit of a bat wing faring better I suppose. enjoy your videos ,make me laugh.!
Nice video, thinking of doing the same. Question, how do you like the amber color lens at night or would the clear lens cast light further? I'm needing more of a fog type on dark roads/rain and looking at tis install instead of crash bar lights. Thanks,
Heading to J&P cycle this morning for lights. lol perfect for the holidays. lol....I know that look..."well shit, where did I put that"...hmmmmm Merry Christmas to you and the family.....
Just so you know, you do NOT have to splice ANY wire on your Harley tp ANY wire harness from custom dynamics, I deal with Brad, I have about 6k worth of there led lights on my 22 ultra, they will make you ANY harness adapters to plug & play your lights, like I told Brad, I paid a lot of money for my ultra, I’m not cutting & splicing anything on it, yes it might cost 5-10 bucks per connector but it better than cutting, even for my custom dynamics led run/blink mirrors, they made me a harness to plug into the system with dead ends on them to attach the splice ends onto, but I still never cut the wires
@@ProfessionalMonkey awesome, how about letting your followers know that they will make the special connecters upon request, that would help them make a better informed decision when looking to buy some, that might solve any issues with people feeling overwhelmed about cutting on the main harness, thanks, love your show, love from Hilliard fla
P.s. im a DJ at the Tampa Gold Club, if you are ever in the area tell the door girl that DJ Uncle Tubby sent you... and when she doesn't know who that is just say Ryan lol
Ok...as stated before GREAT VIDEO BUT...one thing thats been bothering me. Instead removing the tank and running the power button down the spine...why didnt you just run it to the already existing switch blocks in the dash like yhe CVOs??? The plugs are already there in the harness. GRANTED youde have to buy the factory switch from Harley to power it up but doing it that way would be alot cleaner and you wouldnt have an external switch to fumble around for.
Not worried about burning your hand on the motor reaching to turn the light on? Using a table vs the trash can, what are you trying to do be a “professional monkey” ?!? Lol Lightbar looks good!! How about a short riding with it at night? Ride safe happy motoring!!
Your speech about brotherhood in 1% clubs is so false there's one thing that comes before brotherhood and loyalty and that is self preservation in my buisness I see it all the time .
Love Harley Davidson. Can't afford em though. I'm building a old ass GoldWing. A 1983 Aspencade. One day I'll own a R.G. limited. I'm two years away from being able to purchase. That's when the ol car payment will be gone. Looking at 2015 or newer. For now. The 83 gets the nod. Purchase of the bike and all the crap I'm doing I'll end up having 3k in it. Not including the cost of my time. Bought non running. It now runs idle and stops. Next is paint gotta wait till spring. Doing a two tone harley-esk paint scheme in green and black
That’s sweet man
ProMonk, there is nobody more naturally funny than you on TH-cam.. That part about the wiring and Leesburg I almost spit out my lunch so funny. Great job 😄🤙🏻
Dam Monk, I just noticed those specks. Just how bad is your peepers? I bet you can see the future with those.
It’s getting bad
I usually read the instructions afterwards to make sure it was done correctly
Same here
There ya go!
When I had to replace my battery on my Indian Roadmaster, i know, its and Indian, I left the ECM connected but put in a Crown Royal bag. Gave me insurance against a very expense mistake.
Looks like a Face I a robot face...Ever heard of Ninetendo R.O.B the lights looks exactly like it
Monkey - love your videos. It’s the fact that you do “walk through, talk through and wrench through” that make them so awesome. I don’t know what the Racer Boy theme is for baggers, but you have me interested and researching. Keep up the great work!
Liked the time lapse, so you do work on your bikes!!! Liked the banjo music even more.
Banjo music is just sort of "fitting" for me.
Hey…! Looking at that seat cushion on the garage floor. Is that for the bike or your garage stool?
For me when sitting on the floor
Ok,on the oil issue at air cleaner. Since installing cam,you have increased need to balance air flow in engine cases. The trask trans top vent would an excellent choice. Also, very important, M8 engines when modified prefer to be happy when oil level on dip stick is about 1/2 quart low. Trust me, it will help with air cleaner bleeding oil. Enjoy.
Yep, all true. I have everything I need to do to it, but am waiting for one bracket to get it done...
The time lapse was great. should do that more often.
Perfect timing just sat down for my morning coffee
I did that light bar setup on my bike back in 2017 when I bought my road glide. I got the white light bar from eBay for 16 bucks. I posted it on the road glide FB page and had a bunch of people asking me how I did it. I should have gotten a patent🤣
I really like the Advanblack hand gaurd lights
Well I’m sure you have an idea of how to fix the oil dealio DK custom products have what they call a transformer mount and air cleaner that is what I used after some other failed attempts
You do know you could have tapped that switch off the cig lighter plug to right lol probably should have used relay to as well
Yeah buit the wiring lengths were weird. When you plug into the battery it's not long enough to get back to the fairign.
@@ProfessionalMonkey ohhhh got ya
Nice video and nice light, but the wiring... Choose an accessory switch kit from Harley, install a switch on the dash instead of the blank-plates. Tip for a new video. :-)
You could do that, it's just not my bike to spend on, ya know?
Why couldn't you run the switch right off of the auxiliary buttons on the inner fairing?
Cause I’d have to buy the buttons, those are just blanks.
Just curious, why didn't you mount the switch to the inside of the fairing for easier use while riding?
Just didn’t want to see it
I read the directions, and by that I mean I look at the pictures.
Looks like a smile face lil
Pro-Monkey you should take the wheels out and get them powder coated Red to match the Windscreen. It would look bad arse, and you should also get the beauty rings on the engine heads done the same color. Just Saying…
That would be slick, but this bike is gonna change A LOT over the next year...
Great video. Now I have a “how to”, can’t wait to put that light bar on my RGS.
I have an 04 Dyna lowrider that I've converted to a trike could that be mounted to the lower Triple Tree
I would think so,
What is that hurly durbison mount you got there. Is that for your phone? That’s really cool.
It’s a cover for my powervision
Great video and I really like the time lapse.
What kind of seat cushion do you have laying their by your seat? I have an Air Hauck I just love. In my 3000 mile's one way to Sturgis my butt couldn't take it anylonger. Soooo the seat cushion added 2-300 miles a day farther. I'll do between 6-800 miles a day now at 69 yrs old. You do the math. I say best $100 I ever spent. I tried jel cushions but hated them.
I got that on Amazon, I use it when I’m on the floor
@@ProfessionalMonkey good idea!
I like the time lapse. Also, great tip about making sure your tank is full when you are removing it 😂😂😂
The more you know! 😂
I like the time lapse part🤙🏼 keep up the great work! Sorry I didn’t get back to ya on buyin that seat😒
Great video with information and humour, normally poked at your good self. 😂keep doing what you do man.
I appreciate that!
Brother, You garage looks clean! lol No boxes!
Happy holidays to you and your family Pro Monkey! Hope you get everything you wish for!
Looks like bender from future Rama
I read the instructions twice and still get it wrong.
Nice job on the new light Merry Christmas to you and yours
Great vid if that bar hits your fender you got way bigger problems lol
That time lapse must have been hell to edit. What with all the having to cut out the real mechanic jumping in and doing it all for you.
😂😂😂
Let us know how well it lights up! I live in the country and I'm always looking for better lighting!!
Freaking fanrastic
@@ProfessionalMonkey that’s great to hear! I live out in the woods so riding home in the dark on gravel roads I need good lighting! Thank you very much for getting back to me! I’ll be ordering in the morning!
Great video, love your content. Just sayin for this and what I saw...
Phase add a shift linkage (solid black)
Also, I feel that spot under the frame for the new light switch will get so f'n hot and melt any adhesive. My thought was to utilize one of the dummy buttons on the top tree.
✌
How do you feel towards the build quality once you get that Harley Davidson strip down?
I love Harleys. I have torn everything apart, and HD quality is second to none.
Could still tap into the power outlet and use the switch 🤷🏼
😂😂youre such a dork....but great video and idea for my sons bike. Only issue I have is the bracket covers the adjuster for the headlight but thats ok. How many times would you adjust the damn thing!!!
Merry Christmas to you and yours brother.
Always look forward to your videos brother
I don’t understand how that bike is so damn clean under the seat!! Lol I’ve never had a Harley this clean…
It’s new
@@ProfessionalMonkey oh, I thought it was a couple years old because I saw the vents in the headlight bucket, I thought they discontinued that 3/4 years ago? I had one. I sure miss it. I love the outside look real bad, but love the inside cockpit of a bat wing faring better I suppose. enjoy your videos ,make me laugh.!
Where did you get your cover for the power vision ?
That was my question as well Knuckles .
Dyna Gabe! Find him on Instagram!
Doing well. 😊😊
18:35 - To me right here it looks like either C3PO or W.A.L.L.E.
Nice video, thinking of doing the same.
Question, how do you like the amber color lens at night or would the clear lens cast light further?
I'm needing more of a fog type on dark roads/rain and looking at tis install instead of crash bar lights.
Thanks,
I went amber for the fog we get here sometimes at night. The X Light is a bright headlight so that wasn’t the issue.
Thank you very much@@ProfessionalMonkey
Just ordered one from CD.
Looks good, and like the new camera angle 👍👍
Wow you actually did a video with you DOING something, was the mechanic busy today?😂😂😂 kudos.
😂
Time-lapse Cool 👍
Merry Christmas to you, tge Mrs, and your child! Hope Santa is good to you! Coal for most of us!😮😅😂
Heading to J&P cycle this morning for lights. lol perfect for the holidays. lol....I know that look..."well shit, where did I put that"...hmmmmm Merry Christmas to you and the family.....
timelapse! wow, its like a real youtube channel now. lol
Just so you know, you do NOT have to splice ANY wire on your Harley tp ANY wire harness from custom dynamics, I deal with Brad, I have about 6k worth of there led lights on my 22 ultra, they will make you ANY harness adapters to plug & play your lights, like I told Brad, I paid a lot of money for my ultra, I’m not cutting & splicing anything on it, yes it might cost 5-10 bucks per connector but it better than cutting, even for my custom dynamics led run/blink mirrors, they made me a harness to plug into the system with dead ends on them to attach the splice ends onto, but I still never cut the wires
Good advice, I just didn't bother chasing that. Side note, this is the only CD product I have ever had to tap wires for.
@@ProfessionalMonkey awesome, how about letting your followers know that they will make the special connecters upon request, that would help them make a better informed decision when looking to buy some, that might solve any issues with people feeling overwhelmed about cutting on the main harness, thanks, love your show, love from Hilliard fla
Love the video, more time laps please
I'm working on my bike trying to figure out why it won't start as I listen to you.
My stupid mistake why it won't start. Missed a battery cable, Oops
What do you do for work?
Contract killer
Exotic dancer
Oh ok.. that makes sense. He comes out but naked and as they throw the money he slowly puts it back on lol
P.s. im a DJ at the Tampa Gold Club, if you are ever in the area tell the door girl that DJ Uncle Tubby sent you... and when she doesn't know who that is just say Ryan lol
@@livingthedream1392 😂
Next project should be, proper handlebar and riser install on a performance bagger. Come on man.
I'd like to. There's a budget and it's not mine...
How does the light bar work at nite for you. Want one now. I'm in Michigan lots of fog. Just curious. Great video. As always
That's a sexy table!
He dances on when no one is watching. 😂
@@Mrsmonkey5151 yeah, It's safer than the pole I bought him last year. 🤣
New follower here, Merry Christmas.
Welcome!
Kinda looks like Bender from Futurama 😂
Ok...as stated before GREAT VIDEO BUT...one thing thats been bothering me. Instead removing the tank and running the power button down the spine...why didnt you just run it to the already existing switch blocks in the dash like yhe CVOs??? The plugs are already there in the harness.
GRANTED youde have to buy the factory switch from Harley to power it up but doing it that way would be alot cleaner and you wouldnt have an external switch to fumble around for.
MERRY CHRISTMAS 🎄
And to you and yours also!❤ 🎄
Nice
Great job looks like a lot of stuff to remember. Definitely not for me. 13:12
Merry Christmas, now for the love. Please pull off those ugly fork reflectors, it's killing me .
I know right? I think that's tomorrow.
I need that hat.
I got mine at supportgoodtimes.com
Love the hat
Not worried about burning your hand on the motor reaching to turn the light on?
Using a table vs the trash can, what are you trying to do be a “professional monkey” ?!? Lol
Lightbar looks good!!
How about a short riding with it at night?
Ride safe happy motoring!!
I plan to do that this week. It's really not that close to the motor so no issues.
Kinda looks Like a robot face lol
Actually it looks like you have two eyes and A mouth on the front of your ride.😁
Who likes following IKEA instructions……?
A: No one !
Yeah , not much of the look monk! Go beg for a new head light !
Your speech about brotherhood in 1% clubs is so false there's one thing that comes before brotherhood and loyalty and that is self preservation in my buisness I see it all the time .
Looks like an unimpressed face 😑😑😑😑😑😑