As someone who has used HTC phones exclusively since 2009, and current has one of these for a primary device I love how easy this thing looks to work on. Thanks for the video, I was dreading the repair and now I'm not
You're welcome. Ya older HTC models were extremely cluttered and difficult to take apart but the more recent models aren't as bad. But ya other manufacture phones tend to me easier. I miss HTC a lot, wish they would come out with a really good flagship again one day.
I remember the nightmarish repair on the HTC-10, a crazy bad design with the battery mounted under the main board and a spaghetti of wires. They have improved afterwards, but lost marketplace then sold of most of their IP to Google in 2017. heh
I have trouble hearing when using any phone, so i wanted to know where the phone speaker was located so as best place to put my ear. This tear down was exactly what i needed. Great job!
Love the information that you deliver, No other disassembly videos do it like you. Subbed and liked. Also what camera do you use to record your videos. Thanks
I dont know how you guys crack these so much. I literally bent my phone unto a u shape and the screen isnt cracked. It just doesnt charge anymore. I threw it on concrete as hard as i could and still didnt crack the screen
You're going to have to stop throwing like a girl when you try to break your phone on the ground LOL. Seriously though, I think the reason why is that these phones seem to hit sometimes at exactly the wrong angle. When I heard my land, if it's lit off my motorcycle seat and I heard it smack on concrete. I knew right then before I even looked.
You would need to disassemble both the back and pry the screen off as well (posing a risk of damaging your screen). Since the wire is routed through the mid frame, it requires it to be taken apart from both sides. I don't like this design they implement since its pointless and risks damage to the screen.
I was hoping to find out where the antenna is located to make sure I'm not obstructing it. I did learn there are probably one or more for 5g and the main for 4g and below but still don't know where that is.
AT 6:17 you instruct on applying new adhesive, and applying your backplate. Where do you purchase, I assume, the new adhesive? Can something else be substituted for the New Adhesive? Thx
You can find the original pre cut adhesive for this model at mobiledefenders.com . Also here is a video on how to install new adhesive for models which might not have available pre cut adhesives on the market. th-cam.com/video/T4iiPUIM7-Y/w-d-xo.html
Thanks! Here is a link for the parts and pre cut original adhesive: www.mobiledefenders.com/motorola-repair-parts/other-motorola/one-ace-5g-xt2113.html
Do you know anything about the "Myserious" light, in the top-left side on the front? Seems to comes on for second during reboot, after an update. Great video. 👍
Thanks for this video, I've decided l can't do this job myself so I'll buy the screen and bring it with me on my next trip down to S. America and have them replace it for me. Get another replacement phone too.
Great video. I used this to replace a charging port and a battery. As easy as things went, I don't understand why my touchscreen isn't responsive. It turns on and fingerprint works. But swiping the screen does nothing. I checked and reset all connectors. And I was very careful when connecting them. Is there something I am missing?
the sim reader is soldered to the main board, and even though it is replaceable, its not user replaceable. Requires soldering skills and equipment. You can always contact motorola and send it in to them for it to be repaired/replaced.
A bit scary but Success! Replaced my screen. Thanks for the video! The most dangerous thing is getting the battery out. If you puncture the battery it's toast. The Isopropol, heat, and patience is the way to go. Oh ya, pull your SIM card first.
Could you tell me the size in mm, the back lens glass for the (rear) camera of a Moto G 5G? I broke mine but replacements on the web, list it as 22.3mm, not ~21mm when measured (like the Moto G9)? Any help would be appreciated. Thanks.
Not sure the exact size, don't have the device with me anymore but here is a link to the original parts for the phone: www.mobiledefenders.com/motorola-repair-parts/other-motorola/one-ace-5g-xt2113.html
You would need this: www.mobiledefenders.com/motorola-repair-parts/other-motorola/one-ace-5g-xt2113/adhesive-back-cover-for-moto-one-ace-5g-xt2113.html
It's possible. Make sure the motherboard/sub board are seated properly and all cables are connected properly. Also check and make sure the motherboard cover and speaker assembly plastic on bottom are properly in place and screwed down since they have antenna lines drawn over them.
If you are referring to the coaxial cables/wire cables on the right side of the board that go from the main board to the sub board, they are antenna contact cables. You can try to use one from a different phone sold online (since they don't usually sell these type of cables widely) if you can find one the same length. www.mobiledefenders.com/coaxial-antenna-cable-for-moto-one-5g-xt2075-1-xt2075-2-authorized-oem.html
Hello, I have this one and it's 5g. I dropped it in water before. it turns on it works perfectly fine the only thing is, is it glitches and turns into a pink screen and starts glitching then I goes into a black screen then goes back to normal. everything else works fine. any idea on what I can to do repair it or what I can buy for parts in order to repair it or able to tell me what components are needing repairs?
You would need to take it apart, disconnect the battery cable and dry out any liquid inside or else it can damage the phone more by you using it in this condition. Also you would have to brush off any corrosion on the chips or connectors with a small brush like a tooth brush and then see if the phone will work normally after. If not you might need a new screen or a new motherboard depending on which is causing the issue. You wont know until you test it out.
You would probably need to either replace the speaker mesh filter from the inside wall of the frame where the speaker opening is or replace the speaker itself. The video shows how to take it apart, so all that would be left is for you to order a replacement speaker and replace it by watching the video.
Ok . . I am buying a bad imei phone and putting my motherboard from my broken screen phone on the good screen phone. with that said at the end you say to apply adhesive. What kind of adhesive and where do you put it?
Here is a link to a website which has the parts for the phone. You will need the pre cut adhesive for the back cover which is an adhesive tape that is made for the phone and you would peel off the old adhesive from the phone/back plate and apply the new pre cut adhesive tape and then re apply your backplate. www.mobiledefenders.com/motorola-repair-parts/other-motorola/one-ace-5g-xt2113.html
@@brettupthagrove1873 You should be able to, the only thing is the metro one might not have the software on it that has the correct bands for verizon. If that is the case, you would need to flash a stock verizon firmware onto the board.
Hi, I don't have the phone anymore and I don't usually pry working screens off since there is a high chance of damaging them or breaking them. I explained in the video what you need to do in order to replace the screen. After its taken apart, all you need to do is apply heat to the front side of the screen and pry the old screen off from the frame. Then apply new adhesive, re apply your new screen making sure you run the cable through the opening in the frame, and re assemble the phone. If you go to mobiledefenders.com they should have the original pre cut adhesive you can order to re apply your new screen or they also sell complete screen assembly that is attached to the frame already, so you can just move all your parts from the old phone to the new frame assembly and don't need to pry off any screen and re apply a new one etc.
Would require to disassemble the phone and pry the screen off as well (which would pose a risk of breaking or damaging the screen) since the flex cable is ran in between the frame and screen and sits under the motherboard. Most likely you would need to get a new screen with frame combo that comes with the new buttons pre installed.
You make it look so easy. My screen shattered after only 2 months of having the phone. They want $185 to replace it :( . I don't think I can do this myself.
You can get all the original parts you need from this website ( www.mobiledefenders.com/motorola-repair-parts/other-motorola/one-ace-5g-xt2113.html? ) . They sell the lcd screen with frame pre attached for $68 USD plus if you were to get new adhesive for the back plate to re attach it, they sell that pre cut adhesive for the phone for $4 so would run you much cheaper. Or you can also contact motorola and ask how much they would charge for a screen repair. They offer repair services too, some phone screens they charge $99 plus tax but varies from model to model.
Hi thanks, the reason I don't pry off the screens is because I don't want to damage a working display when all that is left after the disassembly as shown in the video is to heat up the screen and pry it off the frame. Usually I explain the process in the videos but I don't actually pry it off again not to damage the working display.
My power button is broken right now. I've taken my phone to 2 repair shops and they both said they couldn't do it because they have to remove the screen and it risks damaging the phone. I'm pretty much at my wit's end here. I can't let the power go out ever or I'll never be able to turn my phone back on again.
Hi, if you want you can contact motorola, they have a repair center you can send your phone in to get repaired. I think they charge like $149 for screen replacement if I am not mistaken.
@@PBKreviews I think they're idiot's if that was the case then they didn't say anything about it when I asked who makes the screens for they're phones its ridiculous
@@williambrown2098 I don't think these screens are made for, like way cheaper. And moto, at least for my country has a list of spare part price list on their regional website. I usually advise to get 3rd party insurance (or Accidental Damage Protection).
Once the phone is taken apart, all that is left is to heat up the screen and pry it off. Nothing else to it. Also they usually sell screen's pre attached to the frame so you can just move over the parts from one frame to the other without having to pry any screen off and re apply etc.
0 you said Qualcomm, but I thought it was a Snapdragon, or are we talking two different processors and both are in there? Editing this is above paragraph here now what I meant to say was people don't call the Snapdragon processor a Qualcomm processor. Most people would not know what you're talking about. They hear Snapdragon in the marketing , the marketing is what called called Qualcomm is responsible for as well as the design. Well Snapdragon is just a name, it's a name that people are familiar with in the marketing of the phone. Also doesn't account for the security chip by Qualcomm which you did not also point out its location.
@@PBKreviews im sorry to bother but is the LCD Frame the case or the screen www.mobiledefenders.com/lcd-frame-assembly-for-moto-one-ace-5g-xt2113-hazy-silver.html
The NFC sensor is so much weaker than on other Motorola's how the hell do we increase the viability of the signal getting to the sensor it's it's I have to touch it to devices in my life
You would probably need to replace the midframe which usually comes attached with the screen to fix the bend. You can check on mobiledefenders.com for replacement parts
So straightforward, simple, shows every thing I need to see. Especially love that you stated there were 16 screws, WITH arrows. Thank you!!❤
Wow thanks so much for this detailed tear down! I requested to you for this on the moto g 5g plus teardown video, and here it is. Great job!
Thank you and you're welcome :)
This is the most calming video I've ever watched.
👍
As someone who has used HTC phones exclusively since 2009, and current has one of these for a primary device I love how easy this thing looks to work on. Thanks for the video, I was dreading the repair and now I'm not
You're welcome. Ya older HTC models were extremely cluttered and difficult to take apart but the more recent models aren't as bad. But ya other manufacture phones tend to me easier. I miss HTC a lot, wish they would come out with a really good flagship again one day.
Oh my lord...the teardown of the HTC m8 was ludicrous, so much going on in there. Totally agreed this phone looks 10x easier to service.
I remember the nightmarish repair on the HTC-10, a crazy bad design with the battery mounted under the main board and a spaghetti of wires. They have improved afterwards, but lost marketplace then sold of most of their IP to Google in 2017. heh
Thanks, this helped me. I had to see another vid for how to take the screen off, but this was detailed and close up for all the vital compoenents.
I have trouble hearing when using any phone, so i wanted to know where the phone speaker was located so as best place to put my ear. This tear down was exactly what i needed. Great job!
Glad it was of help!
Love the information that you deliver, No other disassembly videos do it like you. Subbed and liked. Also what camera do you use to record your videos. Thanks
Thanks! I use a Sony 4K Handycam FDR-AX33
I just wanted to know more about my phone and this video was just what I needed.
Glad you enjoyed it :)
Who's here because your screen is cracked?
I dont know how you guys crack these so much. I literally bent my phone unto a u shape and the screen isnt cracked. It just doesnt charge anymore. I threw it on concrete as hard as i could and still didnt crack the screen
You're going to have to stop throwing like a girl when you try to break your phone on the ground LOL.
Seriously though, I think the reason why is that these phones seem to hit sometimes at exactly the wrong angle. When I heard my land, if it's lit off my motorcycle seat and I heard it smack on concrete. I knew right then before I even looked.
@@realdailycontact138 well, you didnt say it fell off a motorcycle
To get to the power / volume buttons and cable do you have to take all that back off or just the front glass?
You would need to disassemble both the back and pry the screen off as well (posing a risk of damaging your screen). Since the wire is routed through the mid frame, it requires it to be taken apart from both sides. I don't like this design they implement since its pointless and risks damage to the screen.
@@PBKreviews yeah, I just ordered a new glass with frame and I'll do it that way. Seems much easier and less dangerous.
I was hoping to find out where the antenna is located to make sure I'm not obstructing it. I did learn there are probably one or more for 5g and the main for 4g and below but still don't know where that is.
AT 6:17 you instruct on applying new adhesive, and applying your backplate. Where do you purchase, I assume, the new adhesive? Can something else be substituted for the New Adhesive? Thx
You can find the original pre cut adhesive for this model at mobiledefenders.com . Also here is a video on how to install new adhesive for models which might not have available pre cut adhesives on the market. th-cam.com/video/T4iiPUIM7-Y/w-d-xo.html
Great video, thanks for posting. What type of adhesive is used to reattach the back cover
Thanks! Here is a link for the parts and pre cut original adhesive: www.mobiledefenders.com/motorola-repair-parts/other-motorola/one-ace-5g-xt2113.html
Do you know anything about the "Myserious" light, in the top-left side on the front? Seems to comes on for second during reboot, after an update.
Great video. 👍
That color and texture looks stunning!
And no, I'm not going to use the two words I normally use 😂
:)
Thanks for this video, I've decided l can't do this job myself so I'll buy the screen and bring it with me on my next trip down to S. America and have them replace it for me. Get another replacement phone too.
You're welcome :)
Do you have a video of how to replace the LCD screen on this phone mines all smashed
Great video. I used this to replace a charging port and a battery. As easy as things went, I don't understand why my touchscreen isn't responsive. It turns on and fingerprint works. But swiping the screen does nothing. I checked and reset all connectors. And I was very careful when connecting them. Is there something I am missing?
Maybe you damaged the ribbon cable for the display? Idk, would like to know also, I wanna take it apart and replace the earpiece.
Is it possible to replace the sim card reader on this phone? My device is no longer detecting my sim card due to some damage around the camera.
the sim reader is soldered to the main board, and even though it is replaceable, its not user replaceable. Requires soldering skills and equipment. You can always contact motorola and send it in to them for it to be repaired/replaced.
Do you need to reapply the adhesive?
Yes you would need to apply new adhesive, you can check on mobiledefenders.com for original pre cut adhesive for your phone
@@PBKreviews Thank you for this. I am planning on replacing my USB-C flex but could not find the adhesive by itself in the usual sources.
So it doesn't have clips in addition to glue?
A bit scary but Success! Replaced my screen. Thanks for the video! The most dangerous thing is getting the battery out. If you puncture the battery it's toast. The Isopropol, heat, and patience is the way to go. Oh ya, pull your SIM card first.
You're welcome. yeah lol sim is important. I've ran into issues myself a few times when forgetting to pull the tray.
Can i use a Verizon, att, xfinity or family mobile Motorola one 5g ace screen for my TMobile phone?
hi i got the screen open,
but im not sure how to repair or get to the power an volume buttons
Could you tell me the size in mm, the back lens glass for the (rear) camera of a Moto G 5G? I broke mine but replacements on the web, list it as 22.3mm, not ~21mm when measured (like the Moto G9)? Any help would be appreciated. Thanks.
Not sure the exact size, don't have the device with me anymore but here is a link to the original parts for the phone: www.mobiledefenders.com/motorola-repair-parts/other-motorola/one-ace-5g-xt2113.html
What is the adhesive I should use?
You would need this: www.mobiledefenders.com/motorola-repair-parts/other-motorola/one-ace-5g-xt2113/adhesive-back-cover-for-moto-one-ace-5g-xt2113.html
where might i find the wifi antenna?
i think mine came loose bc i cant use wifi at all anymore.
I envy you, my phone doesn't even work because one somehow went Miss
The phone is exactly same as G 5G (not plus)
This disassembly also applies to G 5G
Thank you, I just updated the title.
Hi, I have a power butto problem, can it be solved without replacement the module?
What are the 2 wire cables? Took my phone apart to discover the black one was disconnected
The wire or coaxial cables usually are used for antenna connections but sometimes related to charging and other things.
Hey man, are you guys going to do a teardown of the 2021 g stylus? Waiting for it.
Ya I got it here waiting to get done. Got a few more videos to finish up, and then I will get to it :) Stay tuned.
Ever since I repaired my phone sceen, my phone does not connect to 5g anymore, only 4g. Did I maybe put the cables in the wrong place?
It's possible. Make sure the motherboard/sub board are seated properly and all cables are connected properly. Also check and make sure the motherboard cover and speaker assembly plastic on bottom are properly in place and screwed down since they have antenna lines drawn over them.
@@PBKreviews I mean, I'm just not sure if it's the cables. The connection never cuts out, but it's only 4g.
Hi. Do you think that if you press with a sim removal key, the receiver hole on the top of the phone, by mistake: will the receiver get damaged?
Hi, no you should be fine. The microphone sits above the hole so it would not get damaged.
I was hoping for a video to show me how to remove the battery quickly in case of submersion in water. Could you do a video for that? Thanks.
What are the cables for?? I accidentally cut the black one
If you are referring to the coaxial cables/wire cables on the right side of the board that go from the main board to the sub board, they are antenna contact cables. You can try to use one from a different phone sold online (since they don't usually sell these type of cables widely) if you can find one the same length. www.mobiledefenders.com/coaxial-antenna-cable-for-moto-one-5g-xt2075-1-xt2075-2-authorized-oem.html
Hello, I have this one and it's 5g. I dropped it in water before. it turns on it works perfectly fine the only thing is, is it glitches and turns into a pink screen and starts glitching then I goes into a black screen then goes back to normal. everything else works fine. any idea on what I can to do repair it or what I can buy for parts in order to repair it or able to tell me what components are needing repairs?
You would need to take it apart, disconnect the battery cable and dry out any liquid inside or else it can damage the phone more by you using it in this condition. Also you would have to brush off any corrosion on the chips or connectors with a small brush like a tooth brush and then see if the phone will work normally after. If not you might need a new screen or a new motherboard depending on which is causing the issue. You wont know until you test it out.
Could you do a speaker repair on this phone!? Cute I spilled a bit of coffee on my phone, and unless I use Bluetooth headphones, the sound is muffled
You would probably need to either replace the speaker mesh filter from the inside wall of the frame where the speaker opening is or replace the speaker itself. The video shows how to take it apart, so all that would be left is for you to order a replacement speaker and replace it by watching the video.
What's the model of the battery?
Bangladesh 🇧🇩❤️❤️❤️❤️❤️❤️
Hi thanks!
Ok . . I am buying a bad imei phone and putting my motherboard from my broken screen phone on the good screen phone. with that said at the end you say to apply adhesive. What kind of adhesive and where do you put it?
Here is a link to a website which has the parts for the phone. You will need the pre cut adhesive for the back cover which is an adhesive tape that is made for the phone and you would peel off the old adhesive from the phone/back plate and apply the new pre cut adhesive tape and then re apply your backplate. www.mobiledefenders.com/motorola-repair-parts/other-motorola/one-ace-5g-xt2113.html
@@PBKreviews awesome . . Thanks
One other question. Can I take and replace a board from metro into a Verizon Motorola one 5G ace?
@@brettupthagrove1873 You should be able to, the only thing is the metro one might not have the software on it that has the correct bands for verizon. If that is the case, you would need to flash a stock verizon firmware onto the board.
Could you plzzz do a screen replacement on this phone I have the screen but I can't figure out how to do a replacement
Hi, I don't have the phone anymore and I don't usually pry working screens off since there is a high chance of damaging them or breaking them. I explained in the video what you need to do in order to replace the screen. After its taken apart, all you need to do is apply heat to the front side of the screen and pry the old screen off from the frame. Then apply new adhesive, re apply your new screen making sure you run the cable through the opening in the frame, and re assemble the phone. If you go to mobiledefenders.com they should have the original pre cut adhesive you can order to re apply your new screen or they also sell complete screen assembly that is attached to the frame already, so you can just move all your parts from the old phone to the new frame assembly and don't need to pry off any screen and re apply a new one etc.
@@PBKreviews This source for parts is no good unless you actually have a business.
how do i fix my power button, my phone wont turn on. help
Would require to disassemble the phone and pry the screen off as well (which would pose a risk of breaking or damaging the screen) since the flex cable is ran in between the frame and screen and sits under the motherboard. Most likely you would need to get a new screen with frame combo that comes with the new buttons pre installed.
You make it look so easy. My screen shattered after only 2 months of having the phone. They want $185 to replace it :( . I don't think I can do this myself.
You can get all the original parts you need from this website ( www.mobiledefenders.com/motorola-repair-parts/other-motorola/one-ace-5g-xt2113.html? ) . They sell the lcd screen with frame pre attached for $68 USD plus if you were to get new adhesive for the back plate to re attach it, they sell that pre cut adhesive for the phone for $4 so would run you much cheaper. Or you can also contact motorola and ask how much they would charge for a screen repair. They offer repair services too, some phone screens they charge $99 plus tax but varies from model to model.
@@PBKreviews Thank you! This is super helpful :) have a great day.
@@mariellaarredondo3902 You're welcome :)
can You put samsung 5k mah orgnL bttry, incase U couldn't find MotoroLa One 5g orignL bttery?
Need to show taking off the screen too. Good video .
Hi thanks, the reason I don't pry off the screens is because I don't want to damage a working display when all that is left after the disassembly as shown in the video is to heat up the screen and pry it off the frame. Usually I explain the process in the videos but I don't actually pry it off again not to damage the working display.
What if my phones screen is broken and the phone use to vibrate when I plug in power but now it doesn’t vibrate or boot up? Any help would be great
Not sure, its possible the display would need to be replaced or water may have got in from the cracks and damaged the phone or many other things.
My power button is broken right now. I've taken my phone to 2 repair shops and they both said they couldn't do it because they have to remove the screen and it risks damaging the phone. I'm pretty much at my wit's end here. I can't let the power go out ever or I'll never be able to turn my phone back on again.
Yeah it sucks on these moto phones how they run the flex cable from behind the screen causing it to be an issue for power button replacements.
My phone’s power button is also broken, and after WhatsApp update it hung and shutdown. No way of starting it again.
definite over application of adhesive on the battery.
i dont have a pry card how do I take it off
You can apply heat with a hair dryer and use anything that is plastic and thin to avoid scratching up or damaging the housing or parts.
Tnx bro I did it
Welcome 👍
how much you charge me to replace the screen on my phone "which is the moto one g5" ace if I mailed it 2 you? 100$ I pay for shipping and whatnot?
Hi, if you want you can contact motorola, they have a repair center you can send your phone in to get repaired. I think they charge like $149 for screen replacement if I am not mistaken.
@@PBKreviews I think they're idiot's if that was the case then they didn't say anything about it when I asked who makes the screens for they're phones its ridiculous
You can buy the screen from Mobile Defenders
@@williambrown2098 I don't think these screens are made for, like way cheaper.
And moto, at least for my country has a list of spare part price list on their regional website.
I usually advise to get 3rd party insurance (or Accidental Damage Protection).
At no point did you mention where the GPS chip is located.
I dropped mine in shower, speaker sound bad, is it replaceable?
ya, here is a link to the replacement parts for this phone: www.mobiledefenders.com/motorola-repair-parts/other-motorola/one-ace-5g-xt2113.html
I watched the whole video so I could replace my screen but that's the only step you didn't show yourself doing 🙃
Once the phone is taken apart, all that is left is to heat up the screen and pry it off. Nothing else to it. Also they usually sell screen's pre attached to the frame so you can just move over the parts from one frame to the other without having to pry any screen off and re apply etc.
motrola 5g1 ace ka penal kitne ka h
0 you said Qualcomm, but I thought it was a Snapdragon, or are we talking two different processors and both are in there?
Editing this is above paragraph here now what I meant to say was people don't call the Snapdragon processor a Qualcomm processor.
Most people would not know what you're talking about. They hear Snapdragon in the marketing , the marketing is what called called Qualcomm is responsible for as well as the design.
Well Snapdragon is just a name, it's a name that people are familiar with in the marketing of the phone.
Also doesn't account for the security chip by Qualcomm which you did not also point out its location.
Its the same thing, snapdragon is made by Qualcomm. Just a branding.
I HAVE A motorola one 5g ace I NEED HELP TO FIND A REPLACEMENT SCREEN PLEASE ANYONE HELP
Check on www.mobiledefenders.com
@@PBKreviews im sorry to bother but is the LCD Frame the case or the screen www.mobiledefenders.com/lcd-frame-assembly-for-moto-one-ace-5g-xt2113-hazy-silver.html
@@LoFi_is_Froggi its both the screen and frame of the phone as one piece. So you move all your parts from your old phone to the new frame and screen
@@PBKreviews thank you so much I appreciate it
@@LoFi_is_Froggi you're welcome
The NFC sensor is so much weaker than on other Motorola's how the hell do we increase the viability of the signal getting to the sensor it's it's I have to touch it to devices in my life
Sir please help me my motorola g5g phone is bent
You would probably need to replace the midframe which usually comes attached with the screen to fix the bend. You can check on mobiledefenders.com for replacement parts
Cool
Please tell me you don't have to take all that s*** off just to get to the battery
you would have to remove the back plate, the screws and top plastic cover, then disconnect the battery and pry it off.
poco x3 pro please
Bruh, stolen design by Huawei p40 lite