Trail Master MB200 Shock Upgrade ~ Mini Bike Monday
ฝัง
- เผยแพร่เมื่อ 25 พ.ย. 2018
- Today we do a little test on the shocks for the MB200 Mini Bike. Let us know what you think and don't forget to like, comment and subscribe.
Parts Used In This Build -
Medium Duty Shocks - goo.gl/pCBuou
Heavy Duty Shocks - goo.gl/t7JCSY
Trailmaster MB200 - goo.gl/bA3c4o
Predator 212cc Hemi - goo.gl/vSJB5s
Muffler - amzn.to/2PNfs16
Build Your Own Header Kit - goo.gl/6fqjTY
Billet Side Cover - goo.gl/W2fue3
Top Plate - goo.gl/7wYTQ2
24mm Mikuni Carb - goo.gl/xdbAua
26lbs Valve Springs - goo.gl/KoaUkf
Billet Spring Retainers - goo.gl/HSGBdm
Lash Caps - goo.gl/VY3vE5
Stainless Valves - goo.gl/aZremD
Chromoly Push Rods - goo.gl/v2b6Cu
Billet Lifters - goo.gl/2dwHML
.265 Cam - goo.gl/GCSLTW
Billet Rod - goo.gl/yxenGK
Billet Flywheel - goo.gl/oTHv53
30 Series Pulleys - goo.gl/uBBUCM
Front Fender - amzn.to/2NXQKto
Rear Fender - amzn.to/2yszOGc
Number Plate - amzn.to/2q7Sd6B
Handlebar Brace - amzn.to/2PNGzt2
Handlebar Pad - amzn.to/2ysqyCc
Blue Bolt Covers - goo.gl/C7Xoih
Parts & Tools used on the channel - amazon.com/shop/redbeardsgarage
Quantum Welding Table - goo.gl/V9dHPp
Everlast Welder - goo.gl/8DRgZe
Custom Gas Tanks - bhill1271@yahoo.com
Help support us on Patreon - patreon.com/redbeardsgarage
Want to donate without the commitment? - paypal.me/redbeardsgarage
Want to send us something?
Red Beard's Garage
P.O. Box 572
Sweetwater, TN 37874
Snap Chat - redbeardsgarage
Facebook - redbeardsgarage
Instagram - redbeardsgarage
Google+ - redbeardsgarage
Pinterest - redbeardsgarage
Twitter - redbeardsgarage
-----------------------------------------------------------------------------------------------------------
Instrumentals by Chuki Beats - / chukibeats
----------------------------------------------------------------------------------------------------------
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos. We are trained professionals. Red Beards Garage does not take any responsibility for injury's created by doing so.
#RBGKarts #RedBeardsGarage - บันเทิง
When your scientific method includes "a hot lap and jumping the driveway" you're doing life right.
this may be a stupid suggestion as I'm sure you know this but you can adjust the stiffness of them shocks by turning that lower collar at the bottom of the spring you can see that little oval shape tab that is spot welded to the body of the shock and it's setting in a little groove well, when you turn that spring perch that has the grooves in it it pinches that spring tighter and makes for a stiffer shock. you could make the original set that came off of it super stiff with just a little bit of spring by turning that collar and it pinches that shock in on itself making it stiffer. Give me an indication you read this if you will like a thumbs up or something. Digging the show, I never miss an episode
That engine sounds great.
I was gonna say those mids are quite nice. I just got the mega moto 212cc, waiting on a my throttle body to come in. Might have to do fender eliminator to run exhaust.but this was nice to see. Thanks Red once again.
Loving the new intro and MUSIC!!
How could someone dislike this vid???
Thanks, it looks like a sharp mini bike.
Waiting to see the rest the gulf cart build I have one blowed engine see what problems come across so know what to expect
Love the build
It looked like the shocks were helping get power to the ground better !!
Thanks for the very informative videos on this series of bikes
Great video, you can move the lower mount rearward to soften them a bit peace
If I ever get a mini bike this is the one to have. Sweet build. Just needs a bigger rear sprocket for more down low pwr!
This thing is sweet! Can’t wait to see future episodes with this thing. By the way Red Beard, my youngest son Justin now calls drifting “Drift snot” obviously an adaptation of your “Rip Snot” lol love the channel!!
I like my pintos, cornbread and pork chops too.. your videos for the Healthy Man are so appreciated. I'm new at this suspension stuff, so straight up answers are awesome.
I can't wait to see your mega-bike build. I plan on making a 212cc big wheel w/ swing arm out of a 200S and a 212 on a 185 ATC
@@NckGarage The bikes and engines are either blown or incomplete.
Real nice job gentleman
Your the best bro
U need go pros or cameras on the trees! More angleage 🤘
Oh you can FEEL the 1inch😂😂
Good vid guys
I love that gas tank that trail master good job
Man I want a trailmaster now lol
Man that bike has some decent pep.
You should make a tracked vehicle
P.S. there's a tool that grabs that lower spring perch collar that allows you to spin the collar and the little humps in that spring perch rest on that welded tab that's spot welded to the body of the shock and makes it stiffer. Sometimes when you buy those aftermarket reservoir shocks off eBay it comes with that tool. It's just a handle with a half circle that's as big around as your shock with a little nub sticking off of the end of it you hook the nub on that spring perch and twist and it rides in them little grooves to pinch that shock spring tighter or looser.
I ordered the chrome ones, i wish i had ordered the black ones . they look so much better.
My mb200-2 stock torque converter driver already gave up. Nothing a juggernaut won't fix!
I need to put my mini bike together soon.I like go karts better but mini bikes are cool too.
I like the gas tank I think it looks cool
That is one sick gang$ta mini bike
Definitely want to pick up this Trail Master MB200. I would be using it for accessing my hunting spots - I would need to quiet it as much as possible, change out the sprocket for up hill climbs, and put on the heavy duty shocks. What would be your recommendation for a quiet muffler?
Dude 11:41 I was laughing so hard. Y'all keep killing it, I really love all the videos you put out and that bike seems to scoot along no matter the rider. She rips!
For a minibike, I really like the possibility of this being an adult size bike. The forks seem weak though, I've read elsewhere the same. Would you consider a fork swap? A set of custom triple clamps is all you'd need - and some donor forks.
HERE!
Any thoughts on putting a chain tensioner on? If the tension is correct with the suspension unloaded then the chain is getting too tight when the suspension is compressed. If you land hard you'll likely end up breaking a chain.
We haven't had a problem with the chain. It gets looser as the suspension travels but it doesn't travel enough to kick it
9th!! Snowed in
Nice Yamaha BW350
Talking about power tho yes and shocks mid cause it looks harder to control
How did you guys replace to the 12 inch shocks without happening to do a chain adjustment? My chain is hitting the frame every time with the 12 inch shocks. Is it because you stayed with the stock sprocket?
“You can feel that inch and a half”
😂😂😂
It looked like both aftermarket sets were super stiff. Maybe they will soften up some but I didn't see much movement with Red Beard on it. I didn't see any movement with Lonnie on it.
I know the video doesn't do it justice but they actually was really nice. I like a more firm ride that has some give to it and I think Lonnie would agree
The last set had a 'give coil set in the middle'for the comfort,but allot of tight turns for stiffness.Sweet set for the trails you do.
When you going to finish the EZ-GO golf cart? Would like to see it
Next video on it will be out Friday
Are the shocks adjustable? It looked like they have the twist adjustment for ride hieght.
Does the chain rub on the pivot with the longer shocks...if yes, what is the fix?
Some of these need to be in 3D
Any problems with the chain from the longer shocks?
Where should I order two front shocks for my Baja warrior 200
So the trailmaster mb200 is faster than the Coleman ct200-ex with everything stock?
Rocking the Walmart yeezees
You should do a big block trailmaster
I was thinking they need a 420 or 670 on one of the trailmasters
I have the bt200x. And it's a great bike. Please do a vid to get more speed and torque out of it. I want to be able to go at least 30 MPH of the bt200x
They been doing that already..those things uses smiliar aftermarket parts as the the 212 beside the rod possibly
My bt200x goes 36 all day. No mods other then backing off the throttle screw and a torque converter from gopowersports.com. It still has the governor in aswell. Give me a shout if you have any questions!!
Hmm. I wonder if it would be worth while to put a straight through glass pack on a mini bike...
What happened to the kingquad?? love that beast
We still have it but its my step dads now. He wanted it for hunting
Trying to make a good decision on what bike to buy for the family. What is the ground to seat measurement on a stock Trailmaster MB200 Series 2 mini bike? Also, are the stock fenders plastic or metal?
Not sure on the measurements but the mb200 rides the best. Tons of power out of the box and just a great mini bike all around
Sno-mobile with a front wheel set up?
Will a bigger engine fit in the bike? For the cost of upgrading the stock engine a person could just spend $250 on a 420cc.
Great videos man!! I live in South Jersey where can I buy that trailmaster ? Thanks!
Go Power Sports.com
What church do you go too!
When you guys gonna do some tig welding??
If I would ever get a bottle for my tig
Can you take the springs off of the shocks to paint them?
Yeah you can. Probably would have to use Plasti dip to make it hold up
My first mini bike had paint on the springs when i got it
7th thumbs up!
What kind of pipe is that and where could I get one.are those original genders?
Would the bolts break from to much pressure if the shocks are too big
No sir
Ok thanks
@Red Beard's Garage One thing that I would suggest for Lonnie's trail master is build some sort of body to cover up the empty space on the frame where the engine is at.
We are getting a bigger gas tank that will make the bike look more full soon
I think Lonnie had a few mountain dews 11:40
Gangstaaaa"
I did this and the chain now rubs on the swing arm.
I think you and Lonnie should do time trials to see who's the better, faster rider..weight shouldn't matter.
We did it a long time ago and he was just a tiny bit faster. It surprised me lol
Would it help to move the foot pegs back?
that's what I was thinking to give it a more dirt bike feel
Yeah we plan on putting them further back.
@@RedBeardsGarage cool look forward to it
is that an old fat cat the coming soon one mega bike
Was that a go pro or a sports brawl u put on for the ride lol
Double duty. Keeps them perky and films at the same time
How did you get the muffler to go directly out the back
I built a header for it
@@RedBeardsGarage I'm going to have to just get all the parts and come see you lol, we're not to far apart here in Tennessee.
what kind of welder u got
Everlast 211si
any new videos coming on the coleman BT200x ???????????
Yeah we have a bunch i need to film
Dude! That thing is begging for a 60 tooth rear and 9 tooth front sprocket.
No way. Geared sweet as currently.
😆 Isn't that a 40 tooth?
move the pegs back
My mini bike needs some new shocks the old ones are seized completely
How much do you weigh big boy? I am thinking of getting one of them bikes
240lbs Lonnie is 140lbs
I was 390 now I am 308 were do I need to get to be for. I can ride one and I just turned 66
What r u doing with the old shocks?
Just stuck them with the other shocks on the shelf
Red Beard's Garage would u sell me two of them maybe?
Red Beard's Garage I want to make a sprinter seat for my Baja worrior?
looks like rewelding the lower shock mounts forward 3-4 inches could help new shocks soften up for more travel in rough terrain?
Second viewer
Leave it to the woman to notice the size difference lmao
Not first. Lol
First