Great video. I had a 1992 Chevy step side just like this. Sold it last year. Was in the family for 30 years. Just couldn’t restore it. I wish I kept it. On a different note. I bet that snake kept the motor safe from rats and mice chewing on the wiring
That stinks about the family truck. Great point on the rats and mice. Also check out the video below. It's a 89 we just did. Thanks for comment and support. th-cam.com/video/GSCDSVuKk_Q/w-d-xo.html
Oh hell ya I miss my 1995 Chevy Silverado Z71 king cab. I've owned many MANY trucks and cars throughout my lil life and that dang thing was the best truck ever. The amount of things I have done with that truck is straight up unreal. Got almost 780,000 miles out of it. Yes of course had third trans, but stock block n rear end. Drove n hauled from northern California to Tennessee 17 times. Won mudding comps, pulled three jeeps off cliffs and the list goes on and on. N always drove back home.
Love the video, I have two of these trucks so it hit home for me. One of them has been on the road since it was new it's been all over the country but it's rough and getting weak at 390,000. My other is my project that started just like this video, unfortunately the engine and trans were both trash, I found a healthy donor for it but now I'm dealing with Everything else. I replaced every single brake part before realizing the abs was really the only problem besides rusted lines and hoses. I deleted the abs and like magic I got nice firm brakes. Now I gotta do suspension and body work, replace some interior. When I brought home from Arkansas it was spotless,3 Years of Illinois can corners , rockers and rear wheel wells are all needing work.
That's so awesome. Glad you love these trucks so much. We love them also some amazing trucks for sure. Sucks you live up in rust belt. Thanks for sharing, and the support.
@noebracamontes2589 heck yeah brother. Tomorrow's video at 5 will be on a fleet bed 89. Same color and all. Let's go brother. Thanks for comment and support
Loved the video. I drive a 2005 Chevy with a V8 Vortec. With 213,000 miles. I call her Many Miles. I agree these are the best motors. My mechanic and a handful of people I know want to buy it. But she's not for sale..
Great job brothers, really got some good laughs and enjoyed the content!! I was lucky enough to find a 1992 C1500 1/2 ton around 7 years ago and she fired right up but had to buy a new fuel pump and sending unit from Summitt, tps sensor, map sensor...The ole girl has been running and purring like a kitten ever since. I have a 5.7 350 TBI myself but if I could give some advice if you ever have problems with loss of acceleration and backfiring issues keep an eye on the Ignition Control Module under the distributor cap, not sure what the hell GM was thinking by putting it inside the distributor cap because eventually the thermal compound dries out causing ICM Module to overheat since it sits on a metal plate on the distributor. Also the Igniton Coil itself in between the throttle body and distributor..Heavy Chevy baby, love me an OBS Chevy!! Keep up the great content! I'm in McDonough, GA myself.
That's awesome brother. Congrats on the find and glad ya got her running. Thanks for sharing the story and the feedback. Good to know. We are right next door ti each other. Love it. Did you see our recent 89 gmc video? I'll put the link below. Thanks for comment and support th-cam.com/video/GSCDSVuKk_Q/w-d-xo.htmlsi=krYGtwQ2N_bBaiOp
@JMRRebuilders absolutely my friend, I am happy to support you and the channel. I actually haven't seen the video yet but I definitely will here shortly🤟
@@JMRRebuilders A lesson three cousins of mine and I learned when we were converting a VERY similar Chevy pickup from a "pretty truck" to a "working truck". One of my cousins had purchased the pickup used for kind of cheap and between us we built a hay and cattle hauler bed to replace the step side bed. Before we figured out that the ground strap was what was holding up the parade, we broke at least two commandments and would have caused even the saltiest sailor to blush....If that tells you anything. That truck is still in service on one of my cousins farm to this day.
Heck yeah brother let's go. I try to be encouraging brother. To much negativity in this world. Thanks for comment and support. Check out our other content
Over here that is a common part and on most every shelf. That being said the area you are from (after my experience this weekend) I’m surprised if you got someone to speak to you they knew what a Chevy PU was much less a starter
Mark 16:18 in the Bible says, "they will pick up snakes with their hands; and when they drink deadly poison, it will not hurt them at all; they will place their hands on sick people, and they will get well". Awesome job guys....new subscriber here 😊
I think that dude needs to switch to decaffeinated coffee 😂. But seriously that truck is in nice shape. They don't make trucks like that anymore. All the new ones are garbage.
Here in louisiana I can't mow my lawn without 5 fire ant stings and here he is pumping a tire up, rolling around, standing in it etc and he's just fine.
We arent sure we plan on doing a drop kit, rims and more just waiting on components to show up. Untill them we have other truck videos and other gmc trucks. Check out our other content. Thanks for comment and support.
You can get a starter for a 95-99. It will be gear reduction and more readily available. The bolt pattern is the same and usually you can eliminate the shims.
Yeah me and landon would say we are ford guys but we got some love for when chevy does something right. Them trucks ride amazing compared to the Fords of the same era in my opinion
36:41 i have a 1992 Silverado long bed with a 350. Rides smooth, i dont think the Vortec 350 showed up until 1996ish. My 92 350 isnt a vortec. It does have 2 studs through the air cleaner lid if that counts for anything...
Yes it should have been spraying immediately I have 2 of these tbi and have changed fuel pump more than I care to say but when you turn key on and off 2 times it's primed the lines and the injectors immediately start spraying. It's the injectors
@@JMRRebuilders yes they are the best trucks ever made by Chevrolet and have always been reliable the only issue is the rocker panels rust out and im in the process of fixing them now on both. Do you still have the one you got off the old man
@joelucas4969 that's awesome. Not sure which one that is. This truck we just did a video and the original owner kept it. We do have am 89 we are coyote swapping and then a 95 ext cab chevy. So not sure which one you mean.
@@JMRRebuilders the red one that had the snake skin in it lol. I do have a question though do you know anyone that manufacturers Headbolts? I need a set that will go on a 01 Oldsmobile Aurora 3.5 V6
Those chevy engines can use the newer starter for vortec engines that is a gear reduction starter..much more efficient on power plus stronger crank...just remember the matching bolts for that starter.
Check out this other truck that fought us th-cam.com/video/UxShqsW5nZQ/w-d-xo.html
Is a 350
I suggest that you change the name of the channel, let's go.
Well now that's not a bad idea.
@@JMRRebuilders it's a 350 small block v8
Heck yeah nailed it. Thanks for comment and support
Good content,no cussing,good to get these old rigs running and back on the road. Keep up the good work guys.
Love it brother. Praise the Lord thank you for your kind words. Thank you for the comment and support
I have a 91 5.7 Chevy single cab. Thank you for giving me interest again to work on it.
Let's go brother that's awesome. Check out our latest video on a 89 chevy. Thanks for comment and support
Keep that Ol Giirl running 🏃♂️ 😏
I had a 93 with a 454. Sat for 10 years. Replaced fuel tank and pump and filter. Fuel and brake lines. Ran great
That's so sweet. Love it. Thanks for the comment and support brother
If I had a drink for every time he said Landon I'd be black out half way through the video
Well got one more LETS GO LANDO. Thanks for comment and support
Yea no shit lol
Dam good buzz for sure.
Lol😅
Turn the volume down and turn on the CC. That way you can stay sober and enjoy the video!!🤣
This one hit close. I have several 90s chevy and gmc trucks. Love em.
Heck yeah brother. Want us to come get them running for ya? Thanks for the comment and support
Bingo PAL 💯👍😎
@JMRRebuilders sorry for the late reply! They're daily driven good sir. That's why I'm glad to see people revive them!
Just found your channel tonight browsing the tube while sick. I like your stuff. Subscribed!
Oh man love it brother. Thanks for the sub and the comment.
Great video. I had a 1992 Chevy step side just like this. Sold it last year. Was in the family for 30 years. Just couldn’t restore it. I wish I kept it. On a different note. I bet that snake kept the motor safe from rats and mice chewing on the wiring
That stinks about the family truck. Great point on the rats and mice. Also check out the video below. It's a 89 we just did. Thanks for comment and support.
th-cam.com/video/GSCDSVuKk_Q/w-d-xo.html
@@JMRRebuilders thanks so much for responding! I’ll check out the next video right now
@terryhawkins4493 heck yeah
I would love to drive that truck every day
Heck yeah brother she is a peach. We got plans for her so stay tuned. Thanks for comment and support
Oh hell ya I miss my 1995 Chevy Silverado Z71 king cab.
I've owned many MANY trucks and cars throughout my lil life and that dang thing was the best truck ever. The amount of things I have done with that truck is straight up unreal. Got almost 780,000 miles out of it. Yes of course had third trans, but stock block n rear end.
Drove n hauled from northern California to Tennessee 17 times. Won mudding comps, pulled three jeeps off cliffs and the list goes on and on. N always drove back home.
Have a 91 same as this,
With a 5 speed manual,
She’s a keeper
💯👍😎👌
I am looking for a 1995 stepside 4x4
@@Gokywildcats11 absolutely right
I feel like Leonard does all the work.
That is completely plausible opinion. His name is landon though. Thanks for the comment and support. Check out our content and support.
Great job guys!! I knew you would get her goin. Hard work pays off. Thanks for sharing and have a great weekend!!
Heck yeah brother thank you so much for the confidence and the kind words. Thansk for the comment and support
New sub here and I wanted to say TY for sharing folks. Keepem commin!
Heck yeah we got a ton of videos check us out. Thanks for subscribing. Welcome to the JMR NATION BROTHER. let's go. Thanks for comment and support
You got the best truck and the best motor
Heck yeah brother she's pretty sweet. Thanks for comment and support. Check out our other content
U guys hit gold . Great trucks reliable dependable. Not bad as comfort. Thanks 👍
Heck yeah these old trucks are pretty sweet. Thanks for the comment and support
I live that guys enthusiasm
Heck yeah
Love the video, I have two of these trucks so it hit home for me. One of them has been on the road since it was new it's been all over the country but it's rough and getting weak at 390,000. My other is my project that started just like this video, unfortunately the engine and trans were both trash, I found a healthy donor for it but now I'm dealing with Everything else. I replaced every single brake part before realizing the abs was really the only problem besides rusted lines and hoses. I deleted the abs and like magic I got nice firm brakes. Now I gotta do suspension and body work, replace some interior. When I brought home from Arkansas it was spotless,3 Years of Illinois can corners , rockers and rear wheel wells are all needing work.
That's so awesome. Glad you love these trucks so much. We love them also some amazing trucks for sure. Sucks you live up in rust belt. Thanks for sharing, and the support.
Nice chevy truck runs like a charm
Yeah bro it sure was impressive. Thanks for comment and support
@@JMRRebuilders your welcome
Yes love the positive vibes and positive words y'all us
Thank you we appreciate that. Thanks for comment and support
Tom Brady. Called he wants his “LETS GO” phrase back!!
Let's go. I'm guessing it predated Tom. Thanks for comment and support
I had a 93 X-TRA cab. That was 1 of the Most difficult starters I ever replaced. 😅
Yeah they can be super tricky. Thanks for comment and support. Check out our other content
I love my 94 OBS GMC 🇨🇱
Great job y'all. Looking forward to seeing what's next
Heck yeah well since that truck we done a few others. Check out our other content. Thanks for the comment and support
Way to go fellas!!!
heck yeah brother thanks for comment and support
Good job guys, nice team work.
Thanks we appreciate it. Thanks for comment and support
Legend has it he still saying Landon
@TalkTrash55 Let's go. This is awesome. Love it. Thanks for comment and support
thats what i came her to comment...! what was his name again?
@@michaelgonzales8521 LETS GO LANDO. Thanks for comment and supprt
I own a 89 I love this content.
@noebracamontes2589 heck yeah brother. Tomorrow's video at 5 will be on a fleet bed 89. Same color and all. Let's go brother. Thanks for comment and support
Love those step sides
Yeah baby they are sweet thanks for watching and commenting brother
They are the truck I always thought about 😊
@@rickreese5794 heck yeah man
@@JMRRebuilders
Really appreciate you guys,
GR8 segment 💯👍😎
Thanks check outnourbother content
Loved the video.
I drive a 2005 Chevy with a V8 Vortec. With 213,000 miles. I call her Many Miles.
I agree these are the best motors.
My mechanic and a handful of people I know want to buy it.
But she's not for sale..
That's si awesome. I think they ride better too. Thanks for comment and support
That is a realy cool truck in fact i have a 93 gmc short bed 2wd
Heck yeah let's go love it. Thanks for comment and support
I love this truck I have one same
that is so cool glad you love it. Thanks for the comment and support. Check out our other content.
Great job brothers, really got some good laughs and enjoyed the content!! I was lucky enough to find a 1992 C1500 1/2 ton around 7 years ago and she fired right up but had to buy a new fuel pump and sending unit from Summitt, tps sensor, map sensor...The ole girl has been running and purring like a kitten ever since. I have a 5.7 350 TBI myself but if I could give some advice if you ever have problems with loss of acceleration and backfiring issues keep an eye on the Ignition Control Module under the distributor cap, not sure what the hell GM was thinking by putting it inside the distributor cap because eventually the thermal compound dries out causing ICM Module to overheat since it sits on a metal plate on the distributor. Also the Igniton Coil itself in between the throttle body and distributor..Heavy Chevy baby, love me an OBS Chevy!! Keep up the great content! I'm in McDonough, GA myself.
That's awesome brother. Congrats on the find and glad ya got her running. Thanks for sharing the story and the feedback. Good to know. We are right next door ti each other. Love it. Did you see our recent 89 gmc video? I'll put the link below. Thanks for comment and support
th-cam.com/video/GSCDSVuKk_Q/w-d-xo.htmlsi=krYGtwQ2N_bBaiOp
@JMRRebuilders absolutely my friend, I am happy to support you and the channel. I actually haven't seen the video yet but I definitely will here shortly🤟
That was crazy 😮
Thanks for comment and support
5.7 350 engine beautiful GMC pickup truck
Heck yeah she's a peach. Thanks for comment and support
I have a 1996 silverado k1500 . I love driving it every day
Thats so awesome brother keep them going lets go. Thanks for comment and support.
Man, the whole time y'all were fighting the bed I was all but hollering "Ground strap! Disconnect the ground strap!"
Man I wish you was there would have saved us. Thanks for comment and support
@@JMRRebuilders A lesson three cousins of mine and I learned when we were converting a VERY similar Chevy pickup from a "pretty truck" to a "working truck". One of my cousins had purchased the pickup used for kind of cheap and between us we built a hay and cattle hauler bed to replace the step side bed. Before we figured out that the ground strap was what was holding up the parade, we broke at least two commandments and would have caused even the saltiest sailor to blush....If that tells you anything. That truck is still in service on one of my cousins farm to this day.
Heck yeah brother lets go
I have a 91 and 98 K2500 both with 350’s they are great!!
Let's go brother thanks for comment and support. That super cool
COOL! truck!! 🙂
Thank you for that we agree completely. Thanks for comment and support.
Not sure but I think his name is Landon .. lol good video
Yeah was worried it wasn't clear. Let's go brother. Thanks for comment and support
Still have my 97 Chevy Z71 with 270k miles and she's still dependable as ever.
Thata awesome brother. Let's go. Thanks for comment and support. Check out our other content
I have a Chevy 95 Z71 4x4 manual transmission, it’s a beast for the Wisconsin snow
That's a super cool one right there. Love it. Thanks for comment and support. Check out our other content
This guy is full of positive energy I like him. I would like to know him
Heck yeah brother let's go. I try to be encouraging brother. To much negativity in this world. Thanks for comment and support. Check out our other content
Nice job and nice music thanks
Thank you so much for the kind words and encouragement. We appreciate the support and comment
Muchas felicidades muchachos buen trabajo
Thank you so much we appreciate the support and comment
I love my 94 GMC obs 🇨🇱
That's super cool truck. Thanks for comment and support. Check out our other content
Great channel
Thank you.
Nice job sir Nice GMC Nice show sir 👏👏👏👏👍👍👍👍😃
Thank you she is a really nice truck. Thanks for comment and support
The truck thank you for saving me I wouldn’t know how much longer I would be here
That is totally possible. The ole girl is back at it again. Thanks for comment and support.
@@JMRRebuilders don’t mention it I’m always here trying to help out
350 vortex, is definitely the truth! #Bulletproof for sure!! Best motor there is!!..✔️
Heck yeah shes a good ole motor for sure brother thanks for the comment and support.
Not a vortec, it’s a tbi. The vortec came along in 96-2000
Buena camioneta ,traimela para aca para Cuba,😂🤝🇨🇺
Thanks so much she's a sweet truck. Be a bit of a drove go Cuba. Thanks for the comment and support
gotta love the ole tbi chebys
Heck yeah brother. Let's go. Thanks for comment and support
I love snakes, as a kid i would always go out in the woods looking for them. Btw I loved the video!
That's awesome brother. As you can see landon and I are not as big of fans of the snakes. Thanks for comment and supprt
My god! Saying Premature celebration would be an understatement.
Thanks for comment and support.
GM'S best year's vehicles =1989-1994, Throttle Body Injection.😊
Yeah they are pretty awesome brother. Completely agree
Over here that is a common part and on most every shelf. That being said the area you are from (after my experience this weekend) I’m surprised if you got someone to speak to you they knew what a Chevy PU was much less a starter
There is so much truth in that. No one round here keeps old trucks running they just move on.
I've always wanted one I love them
Yeah man they are pretty sweet. Thanks for the comment and support.
I like this content let’s go
Heck yeah let's go love it. Thanks for comment and support
Mark 16:18 in the Bible says, "they will pick up snakes with their hands; and when they drink deadly poison, it will not hurt them at all; they will place their hands on sick people, and they will get well". Awesome job guys....new subscriber here 😊
That's awesome brother. Thanks for subscribing and commenting. Good stuff
Y’all got the good stuff $40 12oz can of penetrating oil. I love that stuff it’s incredible
Heck yeah brother it's absolutely lovely. Thanks for comment and support
Nice truck you should do a video on that dodge ram truck it looks like it’s been sitting for years as well
I been trying to work on him for a bit on selling it. Stay tuned. Thanks for comment and support.
I think that dude needs to switch to decaffeinated coffee 😂. But seriously that truck is in nice shape. They don't make trucks like that anymore. All the new ones are garbage.
Heck yeah brother. Well I never drink coffee. Could you imagine if I did. LETS GO BROTHER. She is sweet for sure. Thanks for comment and support
Позитивные парни ! 👌👌👌
Thanks brother wr really appreciate the kind words. Thanks for comment and support
I'm a new subscriber.And I love you guys' content. I'm also keep.
Ing up with how many times you say to Landen's name😂
That's awesome. You should check out our latest video. Thanks for comment and support.
th-cam.com/video/cYcq_DKsigI/w-d-xo.htmlsi=4aZmzBRnALNThK5G
I wonder if that guy's name is Lando?
Actually it is LANDO. LETS GO LANDO. Thanks for comment and support. Check out our other content
Here in louisiana I can't mow my lawn without 5 fire ant stings and here he is pumping a tire up, rolling around, standing in it etc and he's just fine.
We just got thicker skin over here in georgia. LETS GO. GO DAWGS. Im messing thanks for the comment and support.
Can you say let's go anymore
I might say it one more time for you. Thanks for the comment and support
A bit annoying lol
Camera man's antics are a bit over the top, but I do enjoy "will it run" videos
LETS GO. Thanks for comment and support. We have our latest video going live at 5est today. Here is the link
th-cam.com/video/cYcq_DKsigI/w-d-xo.html
TBI small block 350 V8 hell of a truck
Heck yeah they are. Thanks for comment and support. Check out our other content
I feel like this channel needs to be named Let's go Landon!😂
Now thats not a bad idea. LETS GO LANDO! Thanks for comment and support.
TBI is a slug, but it's as reliable as sunrise. 👌
@Jerkwad152 heck yeah brother. So true. Thanks for comment and support
Is there a part 2 to this video? I want to see the alternator replacement and the other needed parts.
We arent sure we plan on doing a drop kit, rims and more just waiting on components to show up. Untill them we have other truck videos and other gmc trucks. Check out our other content. Thanks for comment and support.
Let's go...
Heck yeah brother lets go. Thanks for comment and support. Check out our other content
all best ever made chevy of all Time
We just did a 89 gmc short bed check it out. Thanks for comment and support.
Going to start
Well stay tuned and see. I promise it is not that easy. Thanks for comment and support.
Shake and bake energy. He sounds like John C Reilly
Heck yeah brother let's go. Thanks for comment and support
Hi Landon, your partner is really funny
Well im him so thanks for the comment and support
Injectors might be clogged ! Tapp on injectors with something ! Careful not too hit the connections .
Yeah man stay tuned.
What type of tire inflator did you use? Did you find on Amazon?
Yeah cheap garbage bro. Don't buy it. Thanks for comment and support. Check out our other content
Going to have nightmares of that guy saying Landon
Don't lie them ain't nightmares them are dreams come true. LETS GO LANDO. thanks for comment and support
CAN'T WAIT 😊😂 FOR THE BIG CLEAN UP DID YOU BUY IT
Heck yeah brother. We did not buy it but we will have one more video on it. Stay tuned. Thanks for comment and support
Let’s go!!
lets go brother thanks for joining and commenting.
You can get a starter for a 95-99. It will be gear reduction and more readily available. The bolt pattern is the same and usually you can eliminate the shims.
Good to know thank you. Thanks for the comment and support
Thats a nice little truck, was it a 305 or 350??
It a 350. Yeah she's sweet. Thanks for comment and support
When will you guys get back to trying to get the motor unstuck on the 1969 Ford F100 like you did with the 1990 GMC step side?
The red 69 has been left for dead. We have turned into a parts truck. Thanks for the comment and support
@JMRRebuilders sorry about the stuck engine on the '69 Ford F100, but you win some and you lose some. New subscriber btw.
Let's go. Thanks for watching and subbing.
Muy bueno 🎉🎉🎉🎉
Muy Bueno indeed. Thanks for the comment and support.
I’m a ford guy! I changed a lot of those 350’s they are ok until they are not
Yeah me and landon would say we are ford guys but we got some love for when chevy does something right. Them trucks ride amazing compared to the Fords of the same era in my opinion
36:41 i have a 1992 Silverado long bed with a 350. Rides smooth, i dont think the Vortec 350 showed up until 1996ish. My 92 350 isnt a vortec. It does have 2 studs through the air cleaner lid if that counts for anything...
Let's go so cool. Glad you found us. Check out one of our other vids
I just got my dad’s 1995 Chevy Silverado took very good care of not a single dent on it just a little bit of surface rust on the hood
Let's go. That's so awesome brother. Happy for you. Thanks for comment and supprt. We just did a 89 gmc also. Check it out
Love me a obs Chevy!!!!
@butterbeantv8544 let's go brother. We got a couple.other videos on the channel check them out. Thanks for comment and supprt
That's not a Vortec 350 it's a TBI 350. Vortec 350 was 1996-2000. Cool revival.
Yeah your correct thanks for pointing that out. We appreciate the support and comment
I have a black one my favorite truck ever 350 vorteh I love mine amen
That's awesome man. Love that. Thanks for comment and support
Yes it should have been spraying immediately I have 2 of these tbi and have changed fuel pump more than I care to say but when you turn key on and off 2 times it's primed the lines and the injectors immediately start spraying. It's the injectors
Yeah your Def not wrong on that. Take it you love this old trucks also. Thanks for comment and support
@@JMRRebuilders yes they are the best trucks ever made by Chevrolet and have always been reliable the only issue is the rocker panels rust out and im in the process of fixing them now on both. Do you still have the one you got off the old man
@joelucas4969 that's awesome. Not sure which one that is. This truck we just did a video and the original owner kept it. We do have am 89 we are coyote swapping and then a 95 ext cab chevy. So not sure which one you mean.
@@JMRRebuilders the red one that had the snake skin in it lol. I do have a question though do you know anyone that manufacturers Headbolts? I need a set that will go on a 01 Oldsmobile Aurora 3.5 V6
He's keeping it. Unfortunately I don't man. Good luck
I have basically the same truck but with the square headlights and a manual transmission….I love it.
Let's go. We just did an 89 gmc also check that out. Thanks for comment and support
It's Alive!😂
Heck yeah brother. Let's go. Thanks for comment and support. Check out our other content
😂😂😂❤❤ أنتم رائع جدا والله ❤❤❤
Thank you.
buena saludos desde chile
Heck yeah that's awesome. Thanks for comment and support.
سبحان الله وبحمده سبحان الله العظيم
That's right brother. Thanks for comment and support. Check out our other content
Still a good truck
Heck yeah it is. Love it thanks for comment and support.
Those chevy engines can use the newer starter for vortec engines that is a gear reduction starter..much more efficient on power plus stronger crank...just remember the matching bolts for that starter.
Thats some good information to keep in the vault. Thanks for sharing that
They get to excited.
Well that's one opinion.
How is your finger today?
@neiljean-louis3372 not bad. Just got a little punch. Thanks for asking
It's very funny video
Heck yeah brother we appreciate the support and comment.