Two of the most genuine Christian guys I have ever met. Thanks for dusting the old girl off and getting her going again. A long road ahead but that’s how memories are made. Thanks guys for the smiles this week.
'79 3/4 ton 4whldr Camper Special. You have a jewel of a truck. The 300 6banger is one of the best simple motors Ford ever built. The trans set-up will fit 289, 302, 351 C, and 351 Winsor blocks. If you put a throttle-body fuel injection system on it you'll be pleased with both mileage and power. I don't remember if the motor mounts will interchange. Generally, the C-specials had 4.10 gears because they were built to haul loads. A frame change from the Hi-Boy Fords started in late 1977 so this one has a wider rear axle, a reverse-rotation front differential with integral power-steering instead of the old ram-assist unit. To lift this truck to Hi-boy specs requires a new set of positive-arc springs for the pre-1976 4x4. Then you must install a dropped drag link and change to longer shocks. Then you can remove the anti-sway bar from the front and the truck will work as it should with a 4" lift. Once accomplished it may require a slightly taller block under the rear springs to set the rear height to your liking. Other than that are just minor adjustments such as repositioning brake-line brackets. I built up a number of old Fords like this and earlier. The frame is unbeatable and outclasses in strength all others. That's why Bob Chandler used them on his early "Bigfoots".
The ignorance of standing right in front of the spark plug holes knowing there’s fluid in there and it exploding in his face had me rolling. I don’t think I’ve ever laughed this hard. Dudes a trooper for getting soaked not once but multiple times just to get the shot😂
Let’s Go From Kentucky. I have a 1985 F-150 with basically the same exact 300 engine and a NP-435 4 speed transmission.. My engine quit running a couple of years ago and a local garage told me that my engine was bad. I think that it was very odd that my engine always had a great oil pressure and no knocking. They said that after a compression test that out of 6 cylinders that I only had 1 cylinder making any compression. After some serious consideration on my part, I decided that I wanted my truck brought back home. Several years ago I had another 1985 Ford truck that had a bad cylinder head that smoked just like the truck was in the video with the white steam coming through the exhaust pipe. One thing to remember concerning the removal of the 300 cylinder heads is that you must use the staggered removal of the head bolts or the cylinder head will possibly warp if you don’t go through the process. I definitely want to follow your progress on this truck because of the similarities to my 1985 Ford truck. At least everything was very well lubricated after the engine broke loose.
The first year with the stock rectangular headlights. It was offered as an option in 1978. I had them on my 1978 F-150 with a 460. The original owner bought it factory direct from Dearborn then drove it to Seattle and put it on the barge to Wrangell, Alaska. 4:18
Man glad you had si much confidence. We didn't. Check out this other inline 6 video. th-cam.com/video/UxShqsW5nZQ/w-d-xo.html Thanks for comment and support
Let’s go Landon, 🤓, I had the 1979 F 150 with 351 M lock out hubs Orange & white with Lock Box on side, automatic, These were nice pickups and would still do everything as most new ones today
My Uncle had a 79 ford econoline starcraft conversion van ( camper ) He bought it new... ( had it on the rd from 79 to 1995) canadian vehicle Over 840,000km , oil changed every 5000km.plugs every 50,000km. Only believed using FORD OIL AND FORD FILTERS also only motorcraft plugs.. NO ADDITIVES oil/gas.. Ran premium gas...that van ran like an absolute champ...they had it shipped overseas..he toured all of europe and the US, also all over Canada, finally the body rotted and was left in the back yard... A gent bought the van..used engine for a lobster boat... And it ran for 3 seasons before a bearing turned and it started knocking... The 300 straight 6 was fords absolute toughest engine..however harder on gas than his 1978 460 camper special he owned also. love your vids. Keep the old rigs out of the fields and on the roads !
This is so cool. Guessing your up north somewhere by the lobster boat and rust comments. Love it man so glad you shared. Thanks for the comment and support.
@@JMRRebuilders im in Nova Scotia Canada..we have rough winters.and rd salt...together...vehicles get rotted out. Yup his van was so rotted. It had to be towed on a flatbed. The frame broke on the tow truck when it was taken away.but the drivetrain was all functional
I had the exact same truck when I was a teenager. It was old then. As soon as I seen this truck I had to watch the video. Those straight 6 weren't the fastest but they had plenty of torque. Mine had the 3 in the tree u could drive all day long in second gear.
I'm binge watching all your guyses shows right now as far as I've seen in this one so far I would Cummins swap the hell out of that truck in a heartbeat
Y'all kind of caught this Certified Old Goober off guard with this truck. Until I watched this video, I had only seen two other 250 '79s with inline 6 cylinders. Not that there was anything wrong with those trucks from the farmers point of view but for real grunt when real grunt was needed for towing hay trailers/cattle trailers, etc. the 360cid up to the much-criticized diesel engine were preferred for serous loads/towing purposes. By the way, the 300cid engine was a real work horse. I've seen 300s out last the vehicles they came with from the factory and two or more after that before they had to be completely rebuilt or sent to the scrap yard.
heck yeah love this. Well now you got 2 of our videos watched gonna have to keep watching lets go. Yeah had several of the inline 6 love them things just aint gonna get gas milage or fast. But oh well.
NUNCA AVIA MIRADO TANTA EMOCION DE COMO GRANDES AMIGOS DISFRUTANDO DE LO QUE ASEN COMO NINOS CON SUS MEJORES TRAVESURAS ANIMO GRANDES AMIGOS 😅😅😅😅😅BIEN ECHO
Man you REALLY have to abuse one of those inline 6 to blow a head gasket. I remember growing up and the one we had ride forever with minimal maintenance. Man I miss that old truck.
Now this is wild this is another truck my father had and it was green. He traded it in for the 85 f250 in my videos. He still has the 85 but just a plow truck these days. Not sure if you can verify he claimed the bed or body was galvanized metal under the paint
It's crazy it's not rusted till no tomorrow. Especially with the side was in the woods passenger side. But the pine straw was mice, rats and squirrels. Mainly squirrels it looks like.
With a truck like this, I’m surprised it doesn’t have a V8. You guys should have kept track on how many times Landon was said, lol I think Landon was said more than, Let’s Go.
Well I think combo situation between high idle and not moving in forever. Thanks for checking us out. We got a few other will it starts and tons of other content. Check it out. Thanks for comment and support
my brother bought a wrecked truck with a 6cyl. 2barrel adapter we pulled the finder back took crincle hood off put paste on radator stop leak i drove it 60 miles home and it was a very powerful truck must have increasedhorse about a third more . Im looking for another one but the or pretty pricy for my blood
Pour diesel fuel down the intake / the fastest way too the piston cause fuel has oil in it too help break free from bei g stuck guys ! FYI on anyone seeing my comment. California Smoke.
Hola muchachos muy bueno el vídeo si pueden traduzcan en español castellano .lo saludo desde argentina .lindo sus videos .solo el idioma .lo lo entiendo 😂😂.saludos 👍💪🇦🇷👋
When I'd Seafoam a car my sister would ask me if I were fogging for mosquitoes. The head may have to come off if there is for sure antifreeze smell in the exhaust.
Now put a bottle of Lucas high mileage, sea foam fuel treatment, sea foam in the oil, sea foam in the vacuum lines and anywhere else you can think of 😂😂
That is a strange truck. I don’t think that motor came in that truck. I could be wrong,maybe someone special ordered it like that. Three quarter ton,straight six,and automatic trans. I had a half ton ford with that motor and column shift. Maybe you could get a six cylinder with that big truck.But with automatic,that’s weird.
Las ford f100 son tanques de guerra inmortales, con un amigo hacemos auxilios mecánico en los campos y tuvimos que poner en marcha una f100 deluxe del 79 que estaba en un granero desde el año 86 y en mediodia ya estaba laburando la chata, hay que sacarse el sombrero con las ford
@@JMRRebuilders Here the landscapes are beautiful, the economy is very bad, we Argentinians want to live in the United States, there for 100 dollars you can buy a tool here they are worth more than 700 dollars and the pay for the jobs is bad, enjoy your country friend that is a privilege
Check out this truck we got running and driving th-cam.com/video/r04yRSoksYs/w-d-xo.html
@@JMRRebuilders I watched it and it was good
HECK YEAH BROTHER thank you
Them old 300 inline sixs are tougher than Mike Tyson in the 80s.
Now that is Flipping tough. Let's go. Thanks for the comment and support
Two of the most genuine Christian guys I have ever met. Thanks for dusting the old girl off and getting her going again. A long road ahead but that’s how memories are made. Thanks guys for the smiles this week.
Heck yeah brother we had an absolute blast. Thank you so much for the kind words it means alot. Thanks for the comment and support.
'79 3/4 ton 4whldr Camper Special. You have a jewel of a truck. The 300 6banger is one of the best simple motors Ford ever built. The trans set-up will fit 289, 302, 351 C, and 351 Winsor blocks. If you put a throttle-body fuel injection system on it you'll be pleased with both mileage and power. I don't remember if the motor mounts will interchange. Generally, the C-specials had 4.10 gears because they were built to haul loads. A frame change from the Hi-Boy Fords started in late 1977 so this one has a wider rear axle, a reverse-rotation front differential with integral power-steering instead of the old ram-assist unit. To lift this truck to Hi-boy specs requires a new set of positive-arc springs for the pre-1976 4x4. Then you must install a dropped drag link and change to longer shocks. Then you can remove the anti-sway bar from the front and the truck will work as it should with a 4" lift. Once accomplished it may require a slightly taller block under the rear springs to set the rear height to your liking. Other than that are just minor adjustments such as repositioning brake-line brackets. I built up a number of old Fords like this and earlier. The frame is unbeatable and outclasses in strength all others. That's why Bob Chandler used them on his early "Bigfoots".
That's alot of super awesome information. Totally appreciate that and the comment
The ignorance of standing right in front of the spark plug holes knowing there’s fluid in there and it exploding in his face had me rolling. I don’t think I’ve ever laughed this hard. Dudes a trooper for getting soaked not once but multiple times just to get the shot😂
Heck yeah brother gotta get the content brother. Love that it brought you some joy. Thanks for comment and support.
The big spurt was redirected by the hood.
Had me dying also. 😅
Let’s Go From Kentucky. I have a 1985 F-150 with basically the same exact 300 engine and a NP-435 4 speed transmission.. My engine quit running a couple of years ago and a local garage told me that my engine was bad. I think that it was very odd that my engine always had a great oil pressure and no knocking. They said that after a compression test that out of 6 cylinders that I only had 1 cylinder making any compression.
After some serious consideration on my part, I decided that I wanted my truck brought back home.
Several years ago I had another 1985 Ford truck that had a bad cylinder head that smoked just like the truck was in the video with the white steam coming through the exhaust pipe. One thing to remember concerning the removal of the 300 cylinder heads is that you must use the staggered removal of the head bolts or the cylinder head will possibly warp if you don’t go through the process. I definitely want to follow your progress on this truck because of the similarities to my 1985 Ford truck. At least everything was very well lubricated after the engine broke loose.
@TheIronDuke502 that's so awesome. Maybe we can come ip there and do a will it start some day. Thanks for comment and support
The first year with the stock rectangular headlights. It was offered as an option in 1978. I had them on my 1978 F-150 with a 460. The original owner bought it factory direct from Dearborn then drove it to Seattle and put it on the barge to Wrangell, Alaska. 4:18
Well that good to know. Thst poor trucks gone now. Probably rusted back into the earth. Thanks for comment and support
I knew it would be unstuck! The engine is very strong.
Man glad you had si much confidence. We didn't. Check out this other inline 6 video.
th-cam.com/video/UxShqsW5nZQ/w-d-xo.html
Thanks for comment and support
Ryan sounds like John C Reilly when he played on step brothers 😂
Heck yeah love me so john c baby. Lets go brother. Thanks for comment and support.
Let’s go Landon, 🤓, I had the 1979 F 150 with 351 M lock out hubs Orange & white with Lock Box on side, automatic, These were nice pickups and would still do everything as most new ones today
Heck yeah brother. This thing is sick for sure. Thanks for comment and support.
My Uncle had a 79 ford econoline starcraft conversion van ( camper )
He bought it new... ( had it on the rd from 79 to 1995) canadian vehicle
Over 840,000km , oil changed every 5000km.plugs every 50,000km. Only believed using FORD OIL AND FORD FILTERS also only motorcraft plugs.. NO ADDITIVES oil/gas.. Ran premium gas...that van ran like an absolute champ...they had it shipped overseas..he toured all of europe and the US, also all over Canada, finally the body rotted and was left in the back yard... A gent bought the van..used engine for a lobster boat... And it ran for 3 seasons before a bearing turned and it started knocking... The 300 straight 6 was fords absolute toughest engine..however harder on gas than his 1978 460 camper special he owned also. love your vids. Keep the old rigs out of the fields and on the roads !
This is so cool. Guessing your up north somewhere by the lobster boat and rust comments. Love it man so glad you shared. Thanks for the comment and support.
@@JMRRebuilders im in Nova Scotia Canada..we have rough winters.and rd salt...together...vehicles get rotted out.
Yup his van was so rotted. It had to be towed on a flatbed. The frame broke on the tow truck when it was taken away.but the drivetrain was all functional
That's so cool. I love it.
I have a 93 six inline they run really good great content God bless you brothers!
Heck yeah brother thank you for the comment and support. That is awesome for sure they are sweet.
I had the exact same truck when I was a teenager. It was old then. As soon as I seen this truck I had to watch the video. Those straight 6 weren't the fastest but they had plenty of torque. Mine had the 3 in the tree u could drive all day long in second gear.
That's so flippin awesome bet ya miss it don't you? Thanks for the comment and support
For a second I thought it was Messi working on truck! Good video guys!
Now that is a new one for sure brother. Love it. Let's go
Good Godly people with good quality videos glad i found this guy
Heck yeah lets go. Thanks for the comment and support.
Nice job getting an Old Ford running again! Definitely worth putting some coin into it.
Heck yeah she's pretty sweet. Thanks for comment and support
You are doing one hell of a job on that truck its gonna run
Well won't be for a lack or effort. Check out our other content let us know whatcha think
That aerokroil is great stuff. I sprayed some in each cylinder of a stuck 302 and it freed it up in a couple of hours.
@topher8634 yeah it is some amazing stuff. We tried it on the red f100 we did before this and didn't help her. Thanks for comment and support
Brother that's a nice truck, can't find one like that anymore, great video 👍✝️
Heck yeah brother completely agree. She's pretty sweet for sure. Thanks for comment and support
Had the same truck, well, a 78' with a 300 I6, was the best truck I ever owned, I wish I never sold it!
Heck yeah man that's super cool. It happens brother. Thanks for comment and support. Check out our other content
I knew it would get unstuck cuz you guys are talented. Psych! Cuz the video is over an hour. No but you guys are talented.
Heck yeah brother let's go. She.fought us for sure but we got it. check out our other content. Thanks for comment and support
This is gonna be a great episode! Keep the ford content coming brother!
Heck yeah brother it was insane for sure. Thanks for comment and support
300 6 cylinder the best engine ever made…had 3 of them…
That is awesome they are def well loved. Thanks for comment and support
nothin better then an old inline six- so much room to work amazing ;-)
Let's go brother. She's a runner for sure. Thanks for the comment and support
Great guys. Enjoy the videos
Heck yeah man that's super cool and thanks for watching and supporting us. We def appreciate it
I had no doubt that 6 would come loose. And even if it didn't, the truck is clean and solid enough,it deserves a rebuild or another engine.
Heck yeah love that confidence. That's so awesome. Thanks for taking the time to watch ot and comment. We appreciate the support
everything yall did was professional. new sub yall👍🏿
@Carloss80k hey man that's super awesome. Thanks for the kind words , comment and support. We really appreciate it
First time I see an F250 with V6 in line engine
Apparently they were actually common. Thanks for comment and support
You guys are spoiled down there with solid body's, up here in ohio the new one come equipped WITH RUST
Yeah i couldn't live up there to much cold and way to much rust.
I'm binge watching all your guyses shows right now as far as I've seen in this one so far I would Cummins swap the hell out of that truck in a heartbeat
Awesome guys I love old trucks...
Heck yeah of you love old trucks we got a ton on our channel. Check out our other videos. Thanks for comment and support
Y'all kind of caught this Certified Old Goober off guard with this truck. Until I watched this video, I had only seen two other 250 '79s with inline 6 cylinders. Not that there was anything wrong with those trucks from the farmers point of view but for real grunt when real grunt was needed for towing hay trailers/cattle trailers, etc. the 360cid up to the much-criticized diesel engine were preferred for serous loads/towing purposes. By the way, the 300cid engine was a real work horse. I've seen 300s out last the vehicles they came with from the factory and two or more after that before they had to be completely rebuilt or sent to the scrap yard.
heck yeah love this. Well now you got 2 of our videos watched gonna have to keep watching lets go. Yeah had several of the inline 6 love them things just aint gonna get gas milage or fast. But oh well.
White smoke is a sure sign of a head gasket brothers
Yeah man unfortunately you may not be wrong.
Straight up amazing track. Awesome find rare
heck yeah brother she is sweet for sure. Thanks for the comment and support
Those manifolds work great, as long as you have headers to allow it to breathe.
Heck yeah she does but they may have some holes in them. Thanks for comment and support
NUNCA AVIA MIRADO TANTA EMOCION DE COMO GRANDES AMIGOS DISFRUTANDO DE LO QUE ASEN COMO NINOS CON SUS MEJORES TRAVESURAS ANIMO GRANDES AMIGOS 😅😅😅😅😅BIEN ECHO
Love this truly appreciate the kind words. Check out our other videos.
That's a beautiful truck with out the yellow jackets lol
It truly is a sharp truck. Thanks for comment and support
You guys are great. Lol. Never stand in the path of spark plug holes. Lol.
Thanks brother we really appreciate that. Thanks for comment and support.
Man you REALLY have to abuse one of those inline 6 to blow a head gasket. I remember growing up and the one we had ride forever with minimal maintenance. Man I miss that old truck.
Yeah they are built for taking a beating for sure. So cool you grew up with one. Thanks for the comment and support
Dude the lets go line need to give it a break. Youre sounding like kamala harris with the unbounded line.
Now that's funny. LETS GO. Thanks for comment and support
Couldn’t watch this due to the guy asking stupid questions that were oblivious conclusions and saying Landon,Landon Landon and Let’s Go Landon!
Let's go lando. Thanks for comment and support
I absolutely LOVE Ford's
Heck yeah brother we gotta a ton of ford content enjoy. Thanks for comment and support
Someone put some time into that truck!
Yeah she was a really sweet truck
Exelente vehículo es lo mas . Que tengan mucho éxito disfruten...💪✨💫🌟✨✨🇦🇷🇦🇷😲
Thank you for the comment and support. Check out our other content.
That Ranger is coool looking
Heck yeah brother it's super cool. Thanks for comment and support
Channel better than ever!
HECK YEAH BROTHER THANK YOU SO MUCH
I love this model ford.
Heck yeah brother let's go. Thanks for comment and support
“Let’s go” = 50+, “Landon” = 8.6 million
Im not sure your math is accurate. Thanks for comment and support.
Great video!!! Runnin and riding good thats a dream truck for sure!!!!!what a babe
Heck yeah brother she is a pretty sweet truck and was such a blast. Thanks for comment and support
Nice job sir Nice show cool FORD 😃👏👏👏👍👍👍👍
Thank you we tried our best. Thanks for comment and support
I love this type of thing 😍
That’s awesome sir thanks for watching and the support!
Now this is wild this is another truck my father had and it was green. He traded it in for the 85 f250 in my videos. He still has the 85 but just a plow truck these days. Not sure if you can verify he claimed the bed or body was galvanized metal under the paint
It is a repaint orignal color was creme.
Let's Go! From Texas.
Heck yeah brother love it. We were just in Texas. Thanks for comment and support
I subscribed as soon as it started
Heck yeah thank you very much.
It's crazy it's not rusted till no tomorrow. Especially with the side was in the woods passenger side.
But the pine straw was mice, rats and squirrels.
Mainly squirrels it looks like.
You are so right. Crazy it isn't rusted to the floor. Thanks for comment and support. We appreciate it.
@@JMRRebuilders you're welcome.
suspense😜😜😜gasoline supply love it😇😇😇
Heck yeah thanks for the comment and support.
Every single thing the guy with glasses says is a question. Ive never heard anyone in my life ask so many questions. LOL
Thanks for comment and support. This is the guy with glasses
I'm liking that 79
Heck yeah brother. She's pretty sweet. Thanks for the comment Nad support
The Ford i6 is awesome.
She was a pretty great engine
More than 10 lets go...OCD!!
Yes i believe there was a counter on this one. Thanks for comment and support
They are great I got one on my slant six
Love it
Just subscribed. What a find.
👍🇺🇸🦅
Heck yeah brother thank you so much for the sub. She was a sweet truck for sure. Check out our other content. Thanks for support and comment
With a truck like this, I’m surprised it doesn’t have a V8.
You guys should have kept track on how many times Landon was said, lol
I think Landon was said more than, Let’s Go.
Let's go. If you go back and count them I'll send you a free piece of merch. Thanks for comment and support
@JMRRebuilders
Your On
36:00, it did have spark.
Landon, 68
Vs
Let's Go, 54
Vs
Ryan, 4
Send me your shirt size and address
Ryan@jmrrebuilders.com
Absolutely love this thanks brother
@@JMRRebuilders Got the shirt.
Thank You
I got a 79 f 100 300 6 love it with 4 speed drive it every day
That's so freaking cool brother. Thanks for comment and support.
I’m in love I want it what such beauty
Heck yeah she's sharp for sure brother. Thanks for comment and supprt.
Good team job man
Heck yeah brother. Thank you for the support and comment
Good shape for the shape it's in
Heck yeah brother it sure is. Thanks for the comment and supper
Man they just don’t build them like that anymore. I have an old 1995 f150 I drive and I love it.
Heck yeah that's awesome. We built a 95 and coyote swapped it. Check out our latest video. We fought it all day. Thanks for comment and support
Great content
Heck yeah we love that. Thanks for comment and support. Check out our other content for more.
@@JMRRebuilders exactly what I'm doing. We will also love to see you guys do head gaskets and engine rebuild much love 💕
Love it that's the plan with the green one soon. Thanks for comment and support
Success alive at 34 let's go 😁
Heck yeah brother let's go. Thanks for comment and support
I’ll be putting an Offenhauser on mine 👍🏻
That is awesome. That is supposed to be a sweet setup. Good luck and thanks for comment and support
FORD 78 😍 MY DREAM SALUDOS CARROS MJ 🇨🇷
That's awesome brother. Thanks for comment and support
Sea foam deep creep best thing to use for something like this eats rust and cleans
Good to know. Really appreciate the support and comment.
Really like the channel. Also why did the transmission kick hard when putting in reverse or in gear? I have a similar truck
Well I think combo situation between high idle and not moving in forever. Thanks for checking us out. We got a few other will it starts and tons of other content. Check it out. Thanks for comment and support
this old truck is just clearing her throat.
Heck yeah brother sure seems like it need to clear out something. Thanks for comment and support. Check out our other content
Just now got a minute to watch! So look for the comments
Heck yeah brother. Let's go. Thanks for comment and support
This video is very cool 😎 😂
Thaank you we appreciate the support and comment
Are you ready? NO. (Blast!!!!)
Heck yeah brother got me good. Thanks for comment and support.
LA CAMIONETA DE MIS SUEÑOS FORD 250 78 🇨🇷 SALUDOS CARROS MJ 🇨🇷
Let's go
New subscriber here. Of course I knew it was going to run. It's a Ford straight six. Pretty much indestructible. Love the video!!!!!
This is awesome love the optimism. Good stuff thanks for subscribing check out our other content. Thanks for comment and support.
Cool old Ford truck. I would remove that toolbox on the bed and keep everything else.
Yeah she's a pretty sweet truck for sure. Thanks for comment and support.
Hell hell yeah
heck yeah brother. Thanks for comment and support
Watch this. Im an idiot & Im gonna get soaked in water & Marvel Mystery Oil. It's gonna be great fun! 💦🤯 😂😂😂
Yet you did watch it and it was fun. Someone needs a smile. Thanks for comment and support
my brother bought a wrecked truck with a 6cyl. 2barrel adapter we pulled the finder back took crincle hood off put paste on radator stop leak i drove it 60 miles home and it was a very powerful truck must have increasedhorse about a third more . Im looking for another one but the or pretty pricy for my blood
that is super cool glad it worked out for yall and glad you shared that story. Thanks for comment and support
QUE BUEN COTORREO TIENEN LOS DOS GRANDES AMIGOS LO BANO DE ACEITE Y LE DIO RISA ENVES DE ENOJO QUE BUENOS AMIGOS
Heck yeah brother it was great for sure. Love it thanks for comment and support. We really appreciate the kindness
" Let's Go "
HECK YEAH BROHTER. LETS GO. Thanks for comment and support
Yes that's true about the inline 6 they'll go forever and guys let's go let's go keep in saying that guys let's go guys let's go
Heck yeah brother let's go. Thanks for comment and support.
A F250 3/4 ton 4x4 with a 300 straight six? My 79 had a 351W and it was an F150 4x4 half ton.
That's so cool guessing you miss yours. Thanks for comment and support.
Pour diesel fuel down the intake / the fastest way too the piston cause fuel has oil in it too help break free from bei g stuck guys ! FYI on anyone seeing my comment.
California Smoke.
That def an option. Thanks for comment and support.
Hola muchachos muy bueno el vídeo si pueden traduzcan en español castellano .lo saludo desde argentina .lindo sus videos .solo el idioma .lo lo entiendo 😂😂.saludos 👍💪🇦🇷👋
Heck yeah man that's super cool honestly I don't know how to do that. Thanks for comment and support brother
When I'd Seafoam a car my sister would ask me if I were fogging for mosquitoes. The head may have to come off if there is for sure antifreeze smell in the exhaust.
Yeah that's what we are thinking for sure. Thanks for comment and support.
I would love to have that truck.
You and alot of us would love it for sure. Thanks for comment and support.
Now put a bottle of Lucas high mileage, sea foam fuel treatment, sea foam in the oil, sea foam in the vacuum lines and anywhere else you can think of 😂😂
Let's go sea foam for the world. Thanks for comment and support.
@@JMRRebuilders Huh? I love your channel what are u talking about
@@joshuavillalobos8218 it was supposed to be a reply to someone else. Sorry. I'll remove it.
@@JMRRebuilders lol ok
@@JMRRebuildersY'all r awesome bro ur good lol
That is a strange truck. I don’t think that motor came in that truck. I could be wrong,maybe someone special ordered it like that. Three quarter ton,straight six,and automatic trans. I had a half ton ford with that motor and column shift. Maybe you could get a six cylinder with that big truck.But with automatic,that’s weird.
It's Def unquie. I know I had a f250 with auto and inline six but it was a 90s model. Thanks for the comment and support
I had the same truck might have three fifty one internet wish I still had it
That's awesome. I bet you do miss it. Thanks for comment and support
will you guys are pretty good
Thanks we appreciate that. Thanks for comment and support
Las ford f100 son tanques de guerra inmortales, con un amigo hacemos auxilios mecánico en los campos y tuvimos que poner en marcha una f100 deluxe del 79 que estaba en un granero desde el año 86 y en mediodia ya estaba laburando la chata, hay que sacarse el sombrero con las ford
That is so true. These old Fords are machines for sure. Thanks for the comment and support.
@@JMRRebuilders
much respect friend, greetings from Argentina!!!
That is awesome. I love Argentina. Always joked about someday moving there. So cool
@@JMRRebuilders Here the landscapes are beautiful, the economy is very bad, we Argentinians want to live in the United States, there for 100 dollars you can buy a tool here they are worth more than 700 dollars and the pay for the jobs is bad, enjoy your country friend that is a privilege
Oh no doubt very blessed for sure. I just love the country landscapes.
I wouldn’t told anyone I owned a Volkswagen bug 😂😂
Thanks for comment and support
Volkswagen bugs are some good cars
Transmission modulator is bad. It's sucking Transmission fluid up thru vacuum line to carb. Thus white smoke.❤😊
Now that's a new one. Interesting observation for sure. We will have to check and see. Thanks for comment and support.
4 barrel on the old 300 6 she ought to run great
Yeah we gotta get her dialed in
What an anticlimactic experience.
Heck yeah let's go brother. Thanks for comment and support