Great tutorial! I think your next video should be about costs . Like the price of machine and what you will spend moving forward once you buy the machine.
Thank you so much for going over this printer. I'm doing research on it... I've read it's best to leave the machine on 24/7. Is that something you'd also recommend? Would leaving it on not require a daily shake of the ink?
It’s nice to see your videos again. Missed them! This video is great and the printer too. The sweatshirt came out gorgeous😍 those colors are vibrant 🤩 great job! Stay blessed love 🥰 👻🎀 👻🎀 👻🎀
Thanks for the video! I've been considering getting into DTF printing and this video confirmed it. Which one of the units prints 13 inches? Thanks in Advanace!!!
Great video! I getting ready to make my purchase, but still a little hesitant about it. I would love to see an updated video of what your thoughts are about this printer, the pros and cons, the quality of the DTF prints, how they sustain wash, can it be placed in the dryer, was the set up easy?
@@yvettecordova7349 hello! I did pull the trigger and purchased this printer with oven, I will admit, I was soooo hesitant, not only because of how much money this is, but how many negative reviews it has because of the white ink clogging issues. Despite of that I decided to purchase it, took me three weeks to set it up because I was so intimidated by it, finally unboxed it set it up, all was pretty simple if you are computer savvy it helps. I have been using it, it does require a lot of maintenance to avoid clogging issues, which in turn you would need to spend on replacement parts that are not cheap. There really isn’t any clear videos on daily maintenance (day or nightly after use) which is a bummer, because the videos that Procolored provides are not that clear, use a different model printer and aren’t very specific. I honestly don’t need to use it everyday, although I still feel like I have to print something and go thru all the cleaning just to avoid clogging. Then you have to figure out what settings work for you to cure your prints, what settings work with the heat press you have. The settings they provide are so broad, and not specific to the material you may be using the DTf for. Their inks and film are very costly, so you might need to venture to other brands and see what works that is less expensive, however, if it’s for business and you are all set up, then it will pay itself. Hope all this info helps you….i feel there are too many paid TH-camrs that get this machine for free so it’s difficult to trust their opinions, because they are trying to sell the product in return
Thank you for this tutorial , I just bought this printer and made a few test prints. The color Iogo on computer is not same when it prints. Have you had this problem or do you have any advice for me? 😅 ex: light blue color prints as more intense dark turquoise
After you press it to your shirt, how does it feel? Does it feel like a screenprint design or is it heavy-handed, feels kinda crunchy and stiff, thick to the touch? Like an iron-on transfer?
Great video! Question: when you do the printhead and nozzle cleaning, how much ink does it waste during that process and also, have you had any issues with the white drying and hardening in either the lines or printhead? Thanks 👍
Hellooo…Thank you so very much! I am about to order the pro colored😃I will use your code🫶🏻I would like to get the brand and description of your procolored table with drawers and slide out. Please❤
Very informative video. I have been looking at this printer for a while now but I've been hesitant to take the leap. One question. Did you have to disable your anti virus software to install the Pro Rip software?
no model of those 🖨 printers is worth buying the heads are covered and no matter how clean they are, they are not the same again. at first the ink is great and after a few months it ceases to be the same even if it cam 😡😡👎👎👎
Hellooo🎉Thank you so much for your content🫶🏻🎊I have a question…”to add graphics on garments, do I have to have both the Procolored printer and a sublimation printer? Please… we have a sublimation printer but my husband and I want to know if we need both? We will be offering garments and tumblers plus glass cans. We are beginners❤
@@deejaydiabolic no model of those 🖨 printers is worth buying the heads are covered and no matter how clean they are, they are not the same again. at first the ink is great and after a few months it ceases to be the same even if it cam 😡😡👎👎👎
no model of those 🖨 printers is worth buying the heads are covered and no matter how clean they are, they are not the same again. at first the ink is great and after a few months it ceases to be the same even if it cam 😡😡👎👎👎
👻🎀 Thanks a bunch Doll So Helpful 🎃❣️ I most Def want a procolored Dtf printer i was looking into them but i think this is the one for me!! 👻🎀👻🎀👻🎀👻🎀🎃👻🎀👻🎀👻🎀👻🎀👻🎀👻🎀👻🎃👻🎀👻🎀👻🎀👻🎀👻
no model of those 🖨 printers is worth buying the heads are covered and no matter how clean they are, they are not the same again. at first the ink is great and after a few months it ceases to be the same even if it cam 😡😡👎👎👎
This video was SO helpful...thank you so much!!!
You are so welcome!
Thanks for your input. I am getting very excited about this once again.
Great video and thank you, signed new follower!
Thank you! I so needed this. My machine does have the automatic mixer, so I didnt think I had to do this extra mixing.
Thank you for helping me make my decision.
I used your code and get $100 off thank you
Thank you so much!🥰🥰 enjoy!
Great tutorial! I think your next video should be about costs . Like the price of machine and what you will spend moving forward once you buy the machine.
Good Idea! Note taken😉
Thank you for explaining the process of cleaning the machine. I just order mine yesterday. I’m excited and nervous at the same time.
Thank you. I used your code to get my printer.
Thank you so much for going over this printer. I'm doing research on it... I've read it's best to leave the machine on 24/7. Is that something you'd also recommend? Would leaving it on not require a daily shake of the ink?
I can't wait to get my new DTF printer. I currently use converted Epson
Awesome video will be ordering mine soon just getting as much information that is out there before making the big purchase.
👻🎀 watched til the end! Loved watching this video! Such a nice print and love the sweater you ended up making!
It’s nice to see your videos again. Missed them! This video is great and the printer too. The sweatshirt came out gorgeous😍 those colors are vibrant 🤩 great job! Stay blessed love 🥰 👻🎀 👻🎀 👻🎀
Thank you, very informative and well done. God bless
Can i use this printer for commercial purposes or is it more suitable for a personal brand..
I’d love to know the table you’re using! It looks so handy!
thanks for your time . a question . after pasting Do you have to iron again at the end or isn't it necessary?
Your channel is very useful... Subscribing from Morocco.
Thank you. Great information!
Thank you for this informative video, it helped me a lot. What kind of alcohol do you use?
Do you have a video on how to fix the white choke outline that appears around the image for this particular DTF printer?
Thanks for the video! I've been considering getting into DTF printing and this video confirmed it. Which one of the units prints 13 inches? Thanks in Advanace!!!
Thatll be the F13 L1800 thats the one i have. And love it. You can use code: LILYROSE for $100 off your order😉
I found your channel, and I love it 😀 ❤😊
Thank you so much 🥰🥰🥰
Hi do you have to use the ink sent with the dtf printer or can you use a different brand?
Hi ! How bad are the fumes? Also how ling does it take approximately to produce one piece? Thank you !
Great video! I getting ready to make my purchase, but still a little hesitant about it. I would love to see an updated video of what your thoughts are about this printer, the pros and cons, the quality of the DTF prints, how they sustain wash, can it be placed in the dryer, was the set up easy?
Hi, I'm hesitant on ordering this brand as well, did you receive an answer on your question?
@@yvettecordova7349 hello! I did pull the trigger and purchased this printer with oven, I will admit, I was soooo hesitant, not only because of how much money this is, but how many negative reviews it has because of the white ink clogging issues.
Despite of that I decided to purchase it, took me three weeks to set it up because I was so intimidated by it, finally unboxed it set it up, all was pretty simple if you are computer savvy it helps. I have been using it, it does require a lot of maintenance to avoid clogging issues, which in turn you would need to spend on replacement parts that are not cheap. There really isn’t any clear videos on daily maintenance (day or nightly after use) which is a bummer, because the videos that Procolored provides are not that clear, use a different model printer and aren’t very specific. I honestly don’t need to use it everyday, although I still feel like I have to print something and go thru all the cleaning just to avoid clogging. Then you have to figure out what settings work for you to cure your prints, what settings work with the heat press you have. The settings they provide are so broad, and not specific to the material you may be using the DTf for. Their inks and film are very costly, so you might need to venture to other brands and see what works that is less expensive, however, if it’s for business and you are all set up, then it will pay itself.
Hope all this info helps you….i feel there are too many paid TH-camrs that get this machine for free so it’s difficult to trust their opinions, because they are trying to sell the product in return
Thank you for this tutorial , I just bought this printer and made a few test prints. The color Iogo on computer is not same when it prints. Have you had this problem or do you have any advice for me? 😅 ex: light blue color prints as more intense dark turquoise
Great video, thank you very much.😊
question that printer only works with its own rip program, or you can work with Cadlink
Hello! Thank you for a great tutorial! Does the procolored dtf printer come with the oven?
Hiii love your work
Hola acabo de conprar esa inpresora y con tu codigo me descontaron $100 muchas gracias
After you press it to your shirt, how does it feel? Does it feel like a screenprint design or is it heavy-handed, feels kinda crunchy and stiff, thick to the touch? Like an iron-on transfer?
Great video! Question: when you do the printhead and nozzle cleaning, how much ink does it waste during that process and also, have you had any issues with the white drying and hardening in either the lines or printhead? Thanks 👍
I don’t see the link to the video you referenced regarding waiting time after printing image and adding powder
I really want one but only plan to use it every few weeks. Is it something for me if I’m shaking the ink daily or no?
did yours come with the thing you used to cut the print?
Hellooo…Thank you so very much! I am about to order the pro colored😃I will use your code🫶🏻I would like to get the brand and description of your procolored table with drawers and slide out. Please❤
Can you use dtf sheets or just a dtf roll with this printer?
can you show us the settings please i changed mine and dont remember what they were? thank you
Very informative video. I have been looking at this printer for a while now but I've been hesitant to take the leap. One question. Did you have to disable your anti virus software to install the Pro Rip software?
no model of those 🖨 printers is worth buying the heads are covered and no matter how clean they are, they are not the same again. at first the ink is great and after a few months it ceases to be the same even if it cam 😡😡👎👎👎
How long have you had it for? You don’t need a fume extractor?
Where can I get the pro rip software, I lost my USB
Host & bows...question. is this machine able to print dtf's for tumblers or only shirts
Thank I love it the video 👻🎀
Hellooo🎉Thank you so much for your content🫶🏻🎊I have a question…”to add graphics on garments, do I have to have both the Procolored printer and a sublimation printer? Please… we have a sublimation printer but my husband and I want to know if we need both? We will be offering garments and tumblers plus glass cans. We are beginners❤
Sublimation and DTF are totally different ways to add graphics to garments. I have a machine of each but not needed together.
@@LilyRoseCraftroom Thank you, much🎀
🎀👻🎀👻🎀👻🎀👻 thank you so much for the info I love that machine I will be getting one in the future.
How do you update the software version?
Hello just subscribe great content 🎉🎉🎉
Link to the DTF tray you used from Michaels?
HI IHAVE THE PROGRAM V128.0 AND YOU HAVE 2.1.1 THAT IS UP DATE?
🎀👻🎀👻
Great video thank you !!!
Wow. This looks much simpler than I thought. I noticed you don’t have to mirror the image
verrryy simple. It automatically Mirrors on its own, never had to mess with any settings
Una pregunta cuanto mide ancho roll film 100m
Why are my images printing on the corner ? Instead of centered 😢
cool
i want a dtf printer but i’m scared of it breaking down 😩
👻 Great video❤ 😘
printer to expensive for me💔
why cant u make your own images or Letters with this Software like cricket?Cricket? How do i Design my own stuff?
👻❤👻🫶🏽
🎀🎀
Price in Pakistan
I have so many mixed emotions, I want to buy this but I hear all these stories about the machine 😩
What stories do you hear? I'm about to pick up a printer similar to this and am curious what you've heard that makes you unsure?
@@deejaydiabolic no model of those 🖨 printers is worth buying the heads are covered and no matter how clean they are, they are not the same again. at first the ink is great and after a few months it ceases to be the same even if it cam 😡😡👎👎👎
no model of those 🖨 printers is worth buying the heads are covered and no matter how clean they are, they are not the same again. at first the ink is great and after a few months it ceases to be the same even if it cam 😡😡👎👎👎
@@aguadillano31 thanks for the info 👍
👻 🎀 👻🎀
👻👻👻👻
Thanks so much for watching!🥰🥰
👻🎀
🎀👻
But you are lying where have you used L1800
👻🎀 Thanks a bunch Doll So Helpful 🎃❣️ I most Def want a procolored Dtf printer i was looking into them but i think this is the one for me!! 👻🎀👻🎀👻🎀👻🎀🎃👻🎀👻🎀👻🎀👻🎀👻🎀👻🎀👻🎃👻🎀👻🎀👻🎀👻🎀👻
Hello, good video, please wear gloves when dealing with that powder...✌🏾❤ new sub here
why do we need to wear gloves?
no model of those 🖨 printers is worth buying the heads are covered and no matter how clean they are, they are not the same again. at first the ink is great and after a few months it ceases to be the same even if it cam 😡😡👎👎👎
👻🎀
👻👻👻