ฝัง
- เผยแพร่เมื่อ 18 ส.ค. 2020
- Hello friends, this video is about the build of lathe machine. In this video I have made a mini lathe machine for metal working. I have fixed my drill machine in this lathe instead of spindle. this lathe machine works very well on materials like iron,aluminium,wood,mild steel and plastic. the lathe bed is made up of iron pipes and the rails are made of metal sheet 6 mm thick. I have made a 4 way tool post for this lathe because it has a good grip on a cutting tool and it can also hold 4 different tools in its 4 slots. Moreover, this lathe machine works very accurately.
NOTE: This video is an official video of APS tools channel, the reuploadation of this video in any way and by anyone is strictly prohibited.
ATTENTION: The tools and machines I have used in this video may be dangerous if used improperly, so don't try to use these tools at home without any training or without the supervision of an adult.
Please subscribe my channel, like my videos and comment.
your support is inspiration for me. so please support me so that I can inspire to upload the new videos.
Thank you
APS Tools
#APSTools
![บุษบา - วงชานเมือง [LiveCoverVertion] Original : เมนทอล](http://i.ytimg.com/vi/Dm81sKcd9rs/mqdefault.jpg)
Well done! You are a fine craftsmen, I enjoyed every minute of your video. Subscribed and the bell on, going to watch some of your other videos now. Very impressed with your skill!!
And to see that you did it on a table without a lot of fancy tools makes it even more impressive. I would much rather watch a guy like yourself building something amazing than a guy with a million dollars worth of tools, it proves how good you truly are.
Don't even listen to the negative comments, most of them are out of pure jealousy at your skill level,
Thankyou brother
A lot of experts at work here giving negative feedback... i am sure is is not the safest or best built in the world but this guy literally built it with scrap pieces using a drill and a screwdriver practically on a kitchen table....
don t get discouraged by the “experts”, everyone started somewhere and then learned to get better, keep up trying (and wear some safety equipment.😉)
This is the best comment. Thankyou very much brother
I WOULDA QUIT BY NOW,I WOULDVE SNAPPED2 OR 3 BITS,THEN BUSTED AT LEAST ONE TAP. DANCED AROUND SOME,AFTER GETTIN A HOT ONE TWIXT MY NEKID TOES!
BUT YOU'RE RIGHT,ONE CAN MAKE ALL SORTS OF EXCUSES NOT TO DO A THING,BUT,IF DETERMINED TO GET OR MAKE SOMETHING, YOU REALLY WANT. WHAT WOULD, COULD STOP YOU?
THE BODY WILL OBEY THE COMMAND OF THE HEART!
Yup....the expert way to make homemade lathe machine using Industrial Tool such as : Lathe Machine, Bench Saw, Circular Saw, Drill Press, Band Sander and much more factory made Tools...
Nice idea,people don't understand that this idea in not for professional work, but good for DIY guys like me, was searching to get easy idea for lathe so I can make aluminium pullies, and seems this will work, I'll use half hp motor instead of drill to mill aluminium, nice idea👍👍👍 god bless you
1st off; don't worry about the negative comments. Just ignore them.
Personally, I think it's a pretty cool idea. Maybe just a couple changes to the base ( good, strong welds, instead of bolts), and definitely a better motor. Just some constructive criticism. I'd love to see another video of it, after the modifications are done.. Definitely a cool project.. Thanks for the video..🍻🍻👍👍
Thankyou
The negative comments are good to be used as constructive criticism to better yourself at least that's how I think.
@@veronicaanthonygarcia9484 Absolutely..🍻🍻
You need to add gibs made from brass or a softer metal that you can put between the ways and the cross slide. That will help improve the accuracy. Great Idea. I'm going to try my own now!
ਬਹੁਤ ਵਧੀਅਾ ਜੀ..
This guy is a true engineer, in every sense of the word. You've made a wonderful product that will stand the test of time, but I dont think I could count the number of times you just bring out some new component that youve made by hand and all you do is indicate that this part goes on next. I mean, I think I can do about 85%-95% of everything youve done in this video, but I would have a LOT of "practice" pieces and "do-overs". Even after all of that, at the end of MY project, I would still have about a dozen things that I would just have to learn to deal with! As far as seeing a cool project video with an awesome shop product at the end of it, this video is fanastic! But if you're looking to build your own lathe and don't have a ton of experience, maybe just start smaller or look elsewhere!
dont lissen to the negative lots of shop built tools work and produce the parts to build better projects were not all rich and can go buy the tools thank you for the great video keep up the good work.
Thankyou
Le daré like por el trabajo realizado aunque yo le haría algunas modificaciones como: No utilizaría un taladro directamente tal y como lo hizo si no otro motor donde fijaría el mandril de un taladro. Le haría un sistema a la coordenadora mas robusto y mejoraría el sistema del riel principal para tener mayor precisión en la operación y por ende un mejor trabajo. En términos generales buen trabajo y buen aporte, da buenas ideas. Saludos!!!
Good job mate & good luck with your Lathe 👍
I just made a wood turning lathe powered by a drill, and thought that it was pretty useless. Made me look around for softwood to turn because I couldn't get good results with hardwood.
I think using a drill might be okay if you use a couple of big bearings to separate the drill from the work you're turning. That way, you can save the drills weak bearings from axial load and get your larger bearings to provide rigidity that people are complaining about. I'm gonna try that on my lathe.
At what point do you just pull the motor out of the drill, or set up a proper fixed motor?
@@Louis-op4zj _"Pulling a motor out of a drill"_ (a regular hand drill) isn't possible because they're designed to be inseparable.
@@BrassLock the motor, gearbox and skin? That's blatantly untrue, at least for reputable brands like Makita. Which I mean, I have a few 240v's laying around from god knows, the 80s or 90s at least? They're a serviceable/repairable tool.
@@Louis-op4zj OK.
I misunderstood your comment to mean that the motor from a hand drill could be taken out (like a motor from a desk fan) and used to power a lathe.
But you mean to remove parts and service them. Yes, of course you can do that.
@@BrassLock if you can take it apart for service or repair. Then you can take it apart to break it down into seperate parts.
Would it not stand to reason, once removed, you could then repurpose those parts. Circuitry, motor, and chuck?
Then, I dunno, fashion some mounts to use the parts, without the rest of the drill. To use the mechanical/electrical drill internals, but with a better mounting set up?
ਵਾਹ ਖਾਲਸਾ ਜੀ, ਬਹੁਤ ਵਧੀਆ ਕੋਸ਼ਿਸ਼ ਕੀਤੀ, ਬੈਰਿੰਗ ਸਾਇਜ ਬਣਾ ਕੇ ਦਿਖਾ ਦਿੱਤਾ ਤੁਸੀੰ ਡਰਿੱਲ ਮਸ਼ੀਨ ਤੇ ਹੀ! ਬਹੁਤ ਵਧੀਆ
ਧੰਨਵਾਦ ਜੀ
Te convendría poner un motor de lavarropas o similar y adaptarle un mandril, el taladro de esa manera hace mucha fuerza y te va a durar un suspiro. Igual como dije antes, buen trabajo.
Thank you for the video and idea! I have some broken Dewalt 20v grinders. Ill have to dig around over the next week or two and gather parts etc but I am going to build on your idea with 20V cordless and see how it does. Be nice to have for turning or little parts on the various job sites.
Brilliant 👏 👏
very nice
Very good idea. Best. Lak
Nice jugaad for small lath work.
Good idea, God bless you
Good idea, a lot of effort, but the way is long and full of stones. You will learn out of your fails, but go on.
Great job if you could get a bearing big enough for the head to hold it, it would help with accuracy. Great video!!!
Well done.. Thank you!
un saludo desde venezuela dandole gracias por su aporte en cada video que sube ful calidad sus proyectos que muestra puede usted enviarme el plano para ver las medidas y hacerme uno muchas gracias
Thank you. Beautiful work. I like the music too.
what a great idea! Welding while wearing sandals! Nothing could possible go wrong there!
ok over protective USA
Its a good start ,. he will see his mistakes in the build ,.and make a new one for sure , all it takes is the will ,.God bless
Whaaaaat 😲?
Thankyou
Anemicno !!! Bitno mu je zadenut noz za pojasom, ... kasapin i strug - nebo i zemlja ...
เป็นเครื่องกลึงที่น่าสงสารมาก
This is a great enginering starter project. Thank you for the video
Thankyou brother
Looks very unstable, but the idea is good
I think the same.. Very difficult without precision machines.. Like lathe itself.. But his work is adorable
Ouh là !!! Moi, le genre de mec qui soude a l'arc avec des tongues, je préfère pas regarder trop longtemps ,je n'ai pas envie d'assister a un drame . Ils ont pas peur des mouches, les gars ! Bonne chance, garçon !!!
good job now all you need to do is fix all the places it flexes
I was looking out for something like this. It's crude but it gave some of us an idea. Thanks bro for this video
Your welcome brother
Imagination turn innovation .. It really good thought
Thankyou
I may not be the best but I love how innovative and resourceful this guy is👍👍👍👍👍👍
This has got to be the most dangerous lathe on the tube!!!!!
Thankyou very much
guess he doesnt have to worry about anybody stealing it then.
ਸਾਬਸ਼ ਸਰਦਾਰ ਜੀ ਬਹੁਤ ਵਧੀਅਾ
ਧੰਨਵਾਦ ਜੀ
Excellente trabajo gracias
Great work. Did I miss the sliding table fabrication 🤷🏽♂️
Impressive what you built with so little tools, but designs not so good, because too much strain on drill, that drill chuck and bearings are gonna be gone within a week of use, if not sooner. You need to figure a way to support that drill chuck, and remove working pressure from it.
Still a thumbs up!
Excelente trabajo. Gracias por compartir.
Thankyou
I'm not overly interested in what he built , But I see his gift for ingenuity ! Also his enthusiasm ! But a lot of people couldn't see this ! They are blinded by their anger and jealousy so they complain about all the wrong they can find cause that's all these people can see now ! That's what being hateful does to you ! I know cause it happened to me , But then a good friend was able to reach me and point out these faults to me and made me realize . I am almost Certain that this comment will only get more anger from the people I spoke of , But that's to be expected. I hope that if it even reaches just one person an shows them ,.... Then its worth it. This evil hate has infected a whole lot of people , You see it in the comment section like here for an example . I wish people of today could take 20 minutes to look at how people acted in the early 1900"s to see the huge difference ! People back then were so considerate to one another ! And people got along so much better ! Just look at how well behaved the children were back then !!! Can't people see we have changed for the worse !?!? The only people that can fix this is us ! Our government can't fix it and they don't want to either !! What if people just took 20 minutes to look at the way people of the early 1900"s acted ? What if we figured out we are slowly killing each other off ? what if we changed back to the way people acted back in the early 1900"s ? Ask yourself this ,.. Do you like the way people are today ? Do you trust anyone ? Good luck and God bless.
Many greetings for your service, dear friend, please give me the exact sizes so that I can make this too. Thank you.
Creio que deve ser aperfeiçoado, mas deixei o meu like como incentivo pela iniciativa.
Me sirve, necesito hacer trabajos pequeños y sencillos para arreglos dentro de mi casa, no necesito mas. Buen video
Not smooth but good try
I liked
Nice, but the welding still needs to be better. But keep practicing.
भाई आपकी वर्कशोप पर एक विडियो जरुर बनाना इन्तजार रहेगा गुडलक
Good job
Great work very nice
Vraiment merci beaucoup pour tout!!!.
I use dremel with cut wheel on X Y vise to grind round stock as cutter. Cuts like butter.
Ficou muito bom parabéns
Thankyou
Merci beaucoup
Bon travail
Good job y re on the right path
Thankyou, please support my new video also
Так,станок то класний,но сварщик так собі,ну за станок👍👍👍👍
U have done marvelous job... But stability issue is there as little play cannot give good results..
I Like SoundTrack Music this Video.
Fico execente
Parabens!👏👏👏
Thanks
Buen trabajo!
فكرة جميلة
لكن المثقاب مع مرور الوقت
لا يستطيع لعمل من هذا النوع
لانه يحتوي على محرك ضعيف
لكن لابأس بختراعك
Legal essa máquina
Great and beauty
Nice try but needs more adjustments. The parts are moving too much even its made of steel. But good project.
Great build brothers, you can upgrade your DIY lathe machine by using half hp power motor with a pully gear and a bigger drill chuck ( 20mm or more Chuck )
Thankyou.
Nice idea
Thanks
Good luck good 🙂☺
Muito bom!
Thankyou
very good job can you send me the Measurements plz.thanks
Ok there plenty of other better ways to build this but I think it's very well done with what equipment and metal the lad had to start with . I say well done my friend !
Thankyou
Awesome work bro... Keep it up.. please come up with videos
ok thankyou
Hmmm, ingenious, but that welding, it’s a wonder all the chatter didn’t have the welds fly apart.
And that precision bearing treatment at the end, certainly gave it a thorough working over with the persuader....
Not to mention the dozens of times the workpiece climbed over the bit lol
ดูแล้วยังเชื่อมเหล็กไม่เป็นเลยยังจะมาโชว์อีก เชื่อมเดียวติดเกี่ยวติด
merci beaucoup pour la vidéo
Молодец 👍💥
Thankyou
ਵਾਹਿਗੁਰੂ ਜੀ ਹਮੇਸ਼ਾ ਚੜ੍ਹਦੀ ਕਲਾ ਵਿੱਚ ਰੱਖਣ । ਸਿੰਘ , ਰਹਿਣਗੇ ਹਮੇਸ਼ਾ ਕਿੰਗ
Waheguru ji ka khalsa waheguru ji ki fateh.
Nice
Thanks
Muito bem valeu
aesi he aek moto k sath bano
mtlb k thori c havy hony chahiye
Faça um suporte bem resistente para o rolamento do eixo do Madril, pois a furadeira é toda feita de plástico e os rolamentos dela fica com jogo,
Shame it's useless, good effort 👌
cool
Muy buen trabajo, solo le veo una pega, y es que faltan las medidas, no Se qué problema tiene con ponerlas, me imaginó que será por querer cobrarlas y por mi parte muy mal- Very good job, I only see one drawback, the measurements are missing, I don't know what problem you have with putting them in, I figured it was because you wanted to charge for them and on my part it was very bad
Muchas gracias por la idea . El acero es muy caro , las platinas con las cuales hacen otros mini tornos son muy caros .
I'd remove the plastic body of the drill and give it an easy to get to everything easily as you're going to have failure in the drill far before the body of the lathe lol
Excellent Work
Fantástico amigo sua criatividade,ficou Top!!!
Abraço,João Carlos - Brasil
Thankyou
ㅁ ㅜㄹ ㅋ ㅏㄱ ㅜ ????
болгаркой проще сделать такой вал для подшипника ))
Nice school project but you could have achieved the same with a file and drill, but I appreciate the effort and planning....
In our next video, we learn how to replace bearings in a hand drill 😁
555
Muito bom gostei
Thanks
@10:02, I can see your Katar :) Are you a Punjabi my friend? By the way you have amzing skills with drill machine, its almost impossible for me to drill such perfect 90 degree holes free hand.
Thankyou brother, its actually pronounced 'the kirpan'.
Vc pode melhorar colocando um mancal e um Motor de acionamento com um mandril maior.
now a homemade hydraulic press for bearings
Excelente trabalho
not a bad idea but the sled needs to be more precise, cant wobble like that.
Не ,ну а что свечи парафиновые в полне можно точить😂😂😂
👍👍
Thank you all of you for supporting me. I am very thankful to all who supported me. Please watch my new video also
th-cam.com/video/9OQbP0wawmw/w-d-xo.html
عمل كبير لكن المثقب غير كاف يفترض أن تكمل المخرطة بتنصيب الماسكة