0:11 the bolt above the turbo in the middle for right corner of the screen, on the left of the black tubing. what is that bolt? i wanted to mess with it but i have no idea what is is…😅
Hello bro! I just have a question, is it possible if you can take photo of your 02 Sensor harness connector wires bottom ones, i just want to see the color codes of the wires. because i changed my damaged connectors due to cracks, now i forgot the wire colors which i will connect them thank you in advance
Hey I got the isr o2 housing and it came without any nuts or bolts and for the 5th bolt on the bottom that u showed it in the o2 housing is a stud and I don’t know what size bolts to get and where
planning on buying this 02 housing, does this delete the primary cat? I have an ISR Race catback with a TurboXS downpipe which deletes the second cat, I'm afraid the car will be too loud if it does get rid of the primary cat
I should have clarified I have a 2.0 t 2013 so basically the one at the top of the engine that you can see in the video is the first O2 and there's one behind it? Can you get to it from the top of the engine? I'm talking about just a regular replacement not changing out the housing.@@ProdigePerformance
@@ProdigePerformancefor my downstream O2 sensor, I went to unclip it and the clip portion broke off on the harness side. I have not taken it off yet, how does it unclip is there something that has to be pushed or pulled up?
hey this is off topic but i watched your video of best mods for the coupe. For the ported intake, is that absolutely necessary? I been trying to contact 3.8 preformance on how the process works, if i need to send my manifold in first etc. but they haven't answered. Is the ported manifold a must have or is there another way to fix the lean issue?
The only other way to fix the cylinder imbalance issue is to get a haltech and make the injectors give a offset per cylinder. So increasing the % by 1-2 i cylinders 2-3 But yes that’s the only way to fix the cylinder imbalance issue
Is there any good 5 bolt gaskets for this mine keep blowing up I just bought an oem one but it looks different than the one I had on it originally and doesn’t look as strong
Downpipe? No O2 housing? Yes There’s 0 fix for that. That’s for any platform. Once you delete the cats you’ll get a 420 code. What you can do to get rid of it is turn off the monitors which will get rid of the CEL. You can easily do that with a tune
Yeah. In the beginning of the video I said the heat shield was already removed. Ideally you want to put it back. Customer ended up getting a Gencoupe store heat shield kit a few months after this
Yo bro does it make a weird noise when you accelerate like if the gasket not in place ? Also could you drop your Instagram so I could show you how mine sounds I really need help fixing this issue
Yo thank you so much for posting this I’ve look everywhere on TH-cam and no one installed a isr o2 housing on a 2013 genny
It’s super easy bro
Going to put mine on Sunday thanks bro
Yes sir !
Do you need to have a o2 sensor remover bit?
0:11 the bolt above the turbo in the middle for right corner of the screen, on the left of the black tubing. what is that bolt? i wanted to mess with it but i have no idea what is is…😅
Can you pair this with a downpipe and get the alphaspeed go tune safely or do you need a custom tune. Also does their tune have the CEL delete?
Hit them up on facebook thats what i did. I can answer ur question but epa police are everywhere
@@HandMadeRoyalty gotcha man, already got in touch with them but thank you!
Thanks for the info!!
Did you take the bolts all the way out or did you just loosen them
Hello bro!
I just have a question, is it possible if you can take photo of your 02 Sensor harness connector wires bottom ones, i just want to see the color codes of the wires. because i changed my damaged connectors due to cracks, now i forgot the wire colors which i will connect them
thank you in advance
What catback do you have, I got the solo preformance and the main thing I’m scared of is a raspy exaust
Hi Brian Paul. Starting to mod my genny. What’s two pros and two cons? Of this? I’m going to pair this With isr race cbe and a test pipe?
Hey man, thanks for the video. Any suggestions on a catted O2 housing? I have emissions here.
No options unfortunately
Did you need a tune after replacing that? And or if i already have a alphaspeed tune is that okay? Just a canned tune :)
You don’t need a tune for this but it helps out definitively
if i do this with a muffler delete will it sound good?
DOING MY INSTALL SOOON SHOULD I HEAT WRAP IF FIRST THO
I would. It’s a huge plus if you do
Hey I got the isr o2 housing and it came without any nuts or bolts and for the 5th bolt on the bottom that u showed it in the o2 housing is a stud and I don’t know what size bolts to get and where
You can get the bolts anywhere. As long as you can get a clamp load on that area you’ll be fine
Brian Paul. What started your obsession with the genesis coupe
The name Brian Paul has been around since day one when looking at builds
I striped one of the studs on my first install any advice on removing the stud?
Drilling it is your best bet.
If you have a friend that has a welder you can also weld a nut to it and try to remove it that way as well
planning on buying this 02 housing, does this delete the primary cat? I have an ISR Race catback with a TurboXS downpipe which deletes the second cat, I'm afraid the car will be too loud if it does get rid of the primary cat
Well..: the primary cat is the stock O2 housing so yes it will delete it
How many O2 sensors does the Genesis coupe have? Also the downstream one is it the one below?
@@DavesGenny 3.8 4
2.0t 2
And yep
I should have clarified I have a 2.0 t 2013 so basically the one at the top of the engine that you can see in the video is the first O2 and there's one behind it? Can you get to it from the top of the engine? I'm talking about just a regular replacement not changing out the housing.@@ProdigePerformance
@@DavesGenny you can if you’re tall enough lol.
If not just the car up. It’s not that hard. No point if playing yourself like that.
@@ProdigePerformancefor my downstream O2 sensor, I went to unclip it and the clip portion broke off on the harness side. I have not taken it off yet, how does it unclip is there something that has to be pushed or pulled up?
@ like any other sensor bro squeeze the locking tab and pull that’s all
Spray some wd40 it tends to help with stuck connectors
hey this is off topic but i watched your video of best mods for the coupe. For the ported intake, is that absolutely necessary? I been trying to contact 3.8 preformance on how the process works, if i need to send my manifold in first etc. but they haven't answered. Is the ported manifold a must have or is there another way to fix the lean issue?
The only other way to fix the cylinder imbalance issue is to get a haltech and make the injectors give a offset per cylinder. So increasing the % by 1-2 i cylinders 2-3
But yes that’s the only way to fix the cylinder imbalance issue
Is there any good 5 bolt gaskets for this mine keep blowing up I just bought an oem one but it looks different than the one I had on it originally and doesn’t look as strong
Oem. Don’t use isr or vibrant ones. Oem is metal and thick
@@ProdigePerformance I bought one from the dealership it was 240$ and it doesn’t even look the same as the one I had on before so hopefully it works
@@GLXMagz $240 for a gasket?
@@ProdigePerformance yeah that’s the price at the dealer it was the last thing I wanted to do but nothing else is working so I just said fuck it
@@GLXMagz god damn my boi, you got ripped off 😭
you have no tune at the time of the install?
You don’t need one lol. This platform isn’t as sensitive as others when it comes to adding performance parts.
As far as I'm aware the ISR downpipe throws a CEL and there aren't any fixes that I've seen yet. Any luck with that?
tune
Downpipe? No
O2 housing? Yes
There’s 0 fix for that. That’s for any platform. Once you delete the cats you’ll get a 420 code.
What you can do to get rid of it is turn off the monitors which will get rid of the CEL. You can easily do that with a tune
Use a spark plug extension on #2 o2 sensor and your done@@ProdigePerformance
I can't afford the isr housing so I gutted cats. Housing must sound and flow better
Sounds better? Yeah definitely
Flow better? No lol
Look at how wide it is unlike the o2 housing
@@ProdigePerformance my bad. I meant the isr sounds and flows better because the exhaust can move out the tailpipe faster now
@@ProdigePerformance I bought a car with the isr housing and full isr exhaust. It was Nice.
Shouldn’t you put back the heat shield?
Yeah. In the beginning of the video I said the heat shield was already removed. Ideally you want to put it back. Customer ended up getting a Gencoupe store heat shield kit a few months after this
Where did you get 02
Housing for the genny
I sell them lol
@@ProdigePerformance could
You send me your Indra
@@ryguyy9949 Instagram prodige_performance
Facebook Brian Paul
@@ProdigePerformance I’ve been looking everywhere for the 13-14 isr 02 housing and can’t find one
@@anthonihebert8504 I sell them. Have over 100 sets in stock
Ig: prodige_performance
What what does the O2 housing do?
Makes the turbo spool faster and gets rid of the primary cat restriction
7-12 whp gains with this part alone.
how do you know for sure it gains those numbers specific? lol
Need moar pressure washer!!!!
Dirty ass engine bay
Yo bro does it make a weird noise when you accelerate like if the gasket not in place ? Also could you drop your Instagram so I could show you how mine sounds I really need help fixing this issue
Prodigy_brian
Could u share what yours sounded like in dealing with same problem I think