ฝัง
- เผยแพร่เมื่อ 26 พ.ค. 2020
- 1st try on designing and 3D Printing a Boomerang. Didn't went as I'd like but was a good try and a fun project
Gcode Link:
www.dropbox.com/s/2a33twrmv9t...
Please Like, Share and Subscribe.
Music:
EPIC - "Royalty Free Music from Bensound"
Chase - Benny Hill - วิทยาศาสตร์และเทคโนโลยี
That first throw 🤣🤣👌
boomerang is not flat, you need bend slightly, and more finger power to make spin more. dont throw full arm swing
It's not necessary to bend slightly the wings, it's all about the Lead and Tail of every wing of the boomerang.. lead should be rounded and the tail should be slope
The secret is to adjust the paddles according to how the boomerang is flying, all those boomerangs could fly well
Hi! you are throwing it with the flat side facing to you and it need be the "shaped" side to you. The shape is perfect and I'm pretty sure that it's funcional. Just flip the boomerang and do another try. ;)
video looks like walthamstow in london. used to live there a while ago
great project, but I feel that you must to increase the leading edge, for more lift
Great work!
Estoy por hacer eso jajajaj, pero creeria que el boomerang tiene una aerodinamica especial, tengo que investigar mas antes de hacer el diseño
Very good 😅
this design looks like a fast-catch. You can make them fly fast and very low in a circle. It is not easy to see the profile you made, maybe you need to make the leading edge a bit more round? I can not see how you throw the boomerang but I think you throw with to much layover, this boomerang may be throw almost vertical straigt forward, not angled up and with a lot of spin ;-)
I tried both throwing it with 45° angle and completely vertical but there is something a “bit” off with the design. Might be a project for another time.
Thanks for the tips.
@@trajanonerd making a boomerang of that design fly well is not to difficult but you need to know a few things about the airfoil and bending the wings. It is a trial and error but throwing is the most difficult part. If you get it right it is a lot of fun. Keep trying. Many happy returns
Super dramatic music
何故⁉️打ち上げるように上向きに投げているのか？不明だな？と観ていた!耳の横辺りで角度をつけて前側に投げるのが普通で滞空用のブーメランなら上向きに投げますけど、ブーメランの種類が違うので楽しめ無いのでは？と感じました。
Would you share the gcode file? I have exactly the same printer as you
I’ll put a link in the description with the gcode and stl file but bare in mind that the design needs more work. It was a failed experiment 😅
There you go mate. I added the link to the code file in the description. Cheers
Wing section Is wrong. You must make it as an airplane wing, like a drop, not trapezoid.
Yeah, it definitely needs a bit of work 😅