97-01 Mercury Mountaineer/Ford Explorer 5.0 How to change oil, air filter & check fluids walkthrough

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 พ.ย. 2024

ความคิดเห็น • 34

  • @simplequestioncanuanswer2457
    @simplequestioncanuanswer2457 ปีที่แล้ว +1

    Thank you awesome directions. I had no idea but 2 minutes of your video solved. Good luck with the channel.

  • @harleyjackson5513
    @harleyjackson5513 2 ปีที่แล้ว +3

    Ty for video, and ty for your Service!

  • @scrub8353
    @scrub8353 2 ปีที่แล้ว +5

    Thank you...the prior owner crossed thread or something....so you helped me

  • @laytonmiller252
    @laytonmiller252 4 ปีที่แล้ว +5

    BRAKE CLEANER CLEANS EVERYTHING!!!!!!!!!!!!

  • @aliciamitchell2055
    @aliciamitchell2055 3 ปีที่แล้ว +1

    Thanks.

  • @luiszambrano2598
    @luiszambrano2598 2 ปีที่แล้ว +1

    Calibración de bujías

  • @chrisr761
    @chrisr761 2 ปีที่แล้ว +2

    You are supposed to put a little oil on the gasket not the threads helps it slide around the metal so I doesn't grip and break seal from the oil filter itself helps it come off and not stick to the engine and cause problems that is why you are supposed to always talk to make sure the gas that comes off the engine so you don't put the new one on and have two gaskets on the between the engine and oil filter

    • @Liberallez
      @Liberallez ปีที่แล้ว

      Yep!!! the gasket is where you need it!!!

  • @Ambygyooit33
    @Ambygyooit33 4 ปีที่แล้ว +3

    Thanks buddy!

  • @cartertaion
    @cartertaion 3 ปีที่แล้ว +2

    Good job man

  • @umaga3501
    @umaga3501 3 ปีที่แล้ว +1

    Get rid of that Fram air filter and put a k&n air filter in there

  • @boomboxmachine
    @boomboxmachine 4 ปีที่แล้ว +4

    Next time try to put some clean oil on the rubber gasket.

  • @GeoffGorman08
    @GeoffGorman08 3 ปีที่แล้ว +2

    Be honest..
    Who else was listening to this in their car and paused the video at 1:37 to see if they needed to pull off to the side of the road or if those sirens in the video??
    🙋 guilty

  • @verinb9
    @verinb9 4 ปีที่แล้ว +1

    Thanks for the video. What about the radiator fluid, where's the proper fill line? 🤔

    • @superbeeflyyproductions9948
      @superbeeflyyproductions9948  4 ปีที่แล้ว

      Absolutely, and the reservoir which I pointed out for coolant actually is overflow for the radiator, the reservoir should have min and max level line. Never take a radiator cap off when a vehicle is or has been running recently. It will shoot out because of the heat of the fluid like a geyser and burn you, plus it's a lil sticky. Check the cap when the vehicle is cold and if the radiator looks low on coolant and if so top it off with your respective coolant. But keep your reservoir filled closer to the max line.

    • @verinb9
      @verinb9 4 ปีที่แล้ว

      @@superbeeflyyproductions9948 yes sorry about that, that's what I was referring to the overflow reservoir. On my vehicle it's hard to tell where the line is. I have an 02 Ford Explorer. 🤔

    • @superbeeflyyproductions9948
      @superbeeflyyproductions9948  4 ปีที่แล้ว +1

      @@verinb9 it might be on the side facing the front of vehicle or side facing the engine. I don't have the vehicle anymore but I'll do some research after work and give u a better answer

  • @GeoffGorman08
    @GeoffGorman08 3 ปีที่แล้ว +2

    Be honest..
    Who else was listening to this in their car and paused the video at 1:37 to see if they needed to pull off to the side of the road or if those sirens in the video??
    🙋 guilty