WILL IT RUN? HONDA XR600R. Can we save this classic from the junkyard? HONDA 4 stroke Dirt bike
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- The XR600R is a very popular off-road motorcycle with an air-cooled single cylinder, four-stroke engine. The XR600r was manufactured by Honda from 1985 to 2000 and is becoming very collectable.
Engine displacement is 591 cc with four valves and a single camshaft. The XR600R has a dry sump lubrication system. Compression is 9.0:1 and a bore/stroke of 97 × 80 mm. The carburettor a 39 mm piston-valve unit.
Join me to see if I can get the XR600R going. Will it run or will it die?
* Penetrating oil mix which I made in the video is 20% Acetone and 80% cooking oil
Please like and subscribe and share with your mates.
Cheers
#HONDA #XR600R #DIRTBIKE #ENDURO
I picked up a 1988 XR600R from my bro for $400 and it has sat in a garage for 26 years..I have been working on it and love it so much!!!
That's good to hear. Im having trouble getting parts for mine but there should be a video soon where I finish the project. Cheers
I can’t wait to see the second vid, especially how you go about restoring the clutch. I’m in a similar boat with my bike, haven’t had the heart to tear into her blind. Great vid as alway m8.
Hi mate, just rescued it from the back paddock this morning. I will be doing another video shortly and going through the bike and finding all the faults and fixing them. They are good old bikes and hopefully I will get this one running and looking well. Cheers
Well how do ever expect to learn anything? 🤔 Just put your big boy pants on and dive in. You'll see it's not that scary
Waiting for the video cheers
Hi mate just uploaded the new vid. Cheers
HELL YA FROM USA JUST FOUND THIS CHANNEL LOVE THE VINTAGE CONTENT
Hi Ronnie, thanks for watching
Ive had all in the XR line but the 600/650. Great bikes, have always been my favorite for put gas in and go.
Great find. I grabbed 1 3 years ago sitting behind a shed. They are a great bike 👍
They are getting rare these days. I've got parts that I ordered waiting to go on the bike for the next video. I hope I can get bike back close to what it once was. Cheers
This is typically the condition you find these machines. Honda built them so good nobody ever did any maintenance. Just put gas and oil
Yes they are good old machines. Cheers
Now it's time to strip the beast & restore it to its former glory!
yep got a heap of parts for it. Hopefully everything goes to plan. Uploading new vid soon. Cheers
great find mate! its good too see a bike same age as me 😍😍😍😍 best of luck with it earned yaself a new subscriber
Hi mate, getting new parts for it every couple of days and hopefully have the 3rd video out on the XR next week, thanks for then sub! Cheers
I do a lot of bikes just like this and I will share my knowledge with you . the first thing you wanna do with a bike in this condition is give it a complete soaking in wd-40 head to toe, with tank seat and plastics off
it helps dislodge old dirty and grease and does wonders for the aluminum and magnesium engine parts and obviously helps loosen fasteners
Thanks for the tip. Cheers
I raced an Al Baker XR280 for years which is the same engine design just smaller, the one thing I had to replace every so often was the cam chain, the auto tensioner does a good job of keeping the chain tight but also causes it to stretch, those are great bikes and worth restoring but parts are getting hard to come by, I hope you do a full restore on it.
Hi Rob, wont be a full restore but it will be very close to it. I'm already finding it hard with a few parts but I have a small shop full of machining tools so I will get away with making a few of the parts. Cheers
ATF & Turpentine or Diesel makes good Penetrating Oil, I'll give you Recipe a Go As well!! I got a old Ballard's XRs Only XR630 - She Still Thumps Hard!! Make Sure the Oil Line to the Head is Primed, the are Notorious for Flogging out the Camshaft Tunnel, from Oil Starvation & the only Remedy is a Replacement Head, & Honda haven't made 'Em for about a Decade!! - Great Job - Let Her Ripp!! 👍😉🍻
Thanks for the tip, I will check that out. Hopefully get around to making the next video next week. I've got a few parts ready to install plus there is still a lot of work to go, hopefully It will be a good runner. Cheers
Yeah timing chain prone to stretch got to keep clean oil in motor not a big capacity of oil cam and bigger valve's in hemispherical head can get some good gains big torque
I spent nearly $12,000.oo on a full ground up rebuild of my 1994 XR 600R plus some gear. For a trip around Australia. 🇦🇺🏍
cool thx for sharing
Thanks for watching!
Great video bro
Thanks mate, I'm working on it again next week. I've some new parts. Will be good once its all done.
Classic pig iron xr he got it started big project but xr 600 it's a icon now
Where’s video two??
It was very wise adding a little motor oil to the cylinder after the beast had sat so long (outside?!???). I cringe when watching "will it start?" documentation of -whatever- sitting years/decades & no cylinder oiling is bothered with.
Where roughly in the Down Under you located?
excelenteeeeee
Checking the oil, let it idle for 5-10 minutes on level ground, wait 2 minutes, unscrew dipstick, wipe dipstick, insert dipstick to the thread, do not screw in, lift dipstick and read oil level.
you can't read the oil level on a cold bike, the oil seeps down in the crank case.
Hi thanks for the comment. I added a little oil before I could even start the bike and I didn't even know if the engine would. The bike didn't run in many years.
2,3 lts of oil with a new filter. Been checking mine cold since ever.
SAVE THAT ANGEL PLEASE !!!
Hi, She will be saved. More vids coming soon. Cheers
My Xr200r takes forever to kick it takes 20 kicks and I am sweating heaps
🇵🇪👍
Mambo vip
I need ll
Blocky of Yamaha 250 majesty
I am in Tanzania
i have the chance to buy 1985 Honda xr600r it runs for 500 bucks
Hey i have a 96 XR600 for sale $400 QLD cheers Rob
Hi mate, where about in QLD is bike located? Can you send reply to ricks_account@hotmail.com Cheers
Nataka l