@@kibukaj2956ya know I could say your wrong too but I don't wanna be confidently incorrect so I'm just gonna say that this is just basic knowledge lol
@bahamutzero4903 if it's stronger than the original then wouldn't his point still stand? Now you've got 1 solid bar and only 2 extra strength welds. Saved time and its most likely stronger too since you can put more effort into the side pieces than all of em.
Welders don't do that because it's much easier and faster to do one single 45° cut on each piece , on a saw , accurately, with measurements. And then the other ends of your steel angle don't end up short or long and cost you even more time
Actual curiosity cuz I don’t do this kind of work and it seemed fine to me, but what would be easier to do than something like this to fix the aligning issue?
I have absolutely zero experience in welding, but the welding community on TH-cam shorts is absolutely the best no matter what a person does good or bad somebody always has something to say differently, which is awesome. 😂😂😂 and so funny
@garystinnett8321 Sorry, I do not know how to post in other languages. Lots of website comments have a way to click on a translation link. I do not know how it works. I wish I could help. It would help me sometimes. If there is someone out there that knows how to make translations work, please help us communicate, and thanks so much. May GOD bless you all today.
@@garystinnett8321Trysqure - это один из самых первых базовых инструментов верстки. никаких измерений, никаких размышлений, просто отметьте свои 45 и двигайтесь дальше.
You didnt have to do all that. Measure the end, mark the same measurement up the length, connect the dots. Alternatively, just measure a 45 degree angle
I've seen it used for shipping spiders inside small diameter stacks. But anything bigger than 3' diameter, we'd use square tubing welded to a blank round.
Fun fact! 45⁰ angles share 2 same lengths to make a 90⁰ angle (which you can see). Next time, simply measure side tip and measure the same at it's length and you'll get your 45⁰ angle cut.
ΤΗΝ ΓΩΝΙΑ ΤΟΥ ΣΕΝΤΣ ΤΙ ΒΡΗΚΑΤΕ ΤΙ ΜΕΤΡΑ ΚΑΙ ΤΙ ΡΑΨΕ ΚΑΙ ΚΛΑΨΕ ΜΙΑ ΦΑΛΤΣΟΓΩΝΙΑ ΣΗΜΑΔΕΒΗΣ ΚΑΤΕΥΘΕΙΑΝ 45* ΚΑΙ ΕΤΟΙΜΑ ΟΤΑΝ ΔΕΙΧΝΗΣ ΚΑΤΙ ΜΑΣΤΟΡΑΚΙ ΜΗΝ ΜΠΕΡΔΕΥΗΣ ΤΟΥΣ ΘΕΑΤΕΣ ΣΟΥ ΚΑΙ ΤΑ ΣΗΜΑΔΕΜΑΤΑ ΓΙΝΟΝΤΕ ΜΕ ΠΡΙΝΟΛΑΜΑ ΦΑΛΤΣΕΤΑ ΣΙΜΑΔΕΥΤΗΡΙ ΚΑΙ ΜΟ ΜΟΛΥΒΙ ΣΙΓΑ ΜΗΝ ΒΑΛΗΣ ΚΑΙ ΚΙΜΩΛΙΑ Ε ΜΑ ΚΟΨΤΑ ΣΕ ΕΝΑ ΠΡΙΟΝΙ ΣΤΟ ΦΙΝΑΛΕ ΒΑΛΕ 45 ΝΑ ΤΕΛΕΙΩΝΟΥΜΕ ΑΦΟΥ ΘΕΣ ΟΡΘΗ ΓΩΝΙΑ Η ΣΤΣΥΡΟ ΟΠΩΣ ΕΚΕΙ ΤΟ 90 ΓΙΑ ΝΑ ΒΓΗ ΒΑΖΗΣ 45 ΚΑΤΑΛΑΒΕΣ ΜΘΑ ΦΑΛΤΣΟΓΩΝΙΑ ΚΑΙ ΤΕΛΕΙΩΣΕΣ ΓΙΑΤΙ ΕΓΡΑΨΑ ΠΟΛΛΑ
Very nice! Personally I use a small chop saw for ends. I bought it to cut piping and with a few jigs it’s turned out to be a real time saver. Thanks guys 🇺🇸👍
Why bother with cutting all 4? You just need to cut two sides, just gotta keep the material thickness in mind, but the gap makes for a great trough for the weld to go into
That equal distant way he has makes for a longer vid, more people figure what other stupid ways he cuts metal. Most importantly is he gonna weld ever correctly
@@fev3rd I think you are correct. It's not about teaching anything properly anymore, but how to maximize views and engagement. A good reputation doesn't even matter anymore.
А почему нельзя взять один целый уголок или хотя бы его сварить и остальные два по ьокам просто подогнать и приварить?. Чем все к подгонять. И я уверен что жто не так идеально булет слелать как на видео.
The measuring wasn't necessary. Put a Tri-Square on there and draw the 45 degree angle from the end. It's wrought iron, you can probably just eyeball it.
@@philthycox2515You are right, it's not a 45, but you can still just draw the correct angle from the point, you don't have to measure all that. If he is making more than one, he could make a shop aid template. My bad though, it is Mild Steel.
Caption should read: If you don't have the common sense to figure this out, you shouldn't be welding in this first place. -telepone, tele friend, tell a Fitter.
These comments prove that welders are some of the most insulting people ever. Even if you do the perfect weld, they’d still say “meh, I could do better” with no constructive criticism.
@@kingtiger3390 If you know anything about anything, you’d know that I am joking about the stereotype of “welders always insulting others’ welds”. I wasn’t even talking about this short anymore, I was just making a general joke. You took this way too personally and it’s telling of your chronic internet addiction
How about just cutting the edges to the angle of the piece divided by 2? This is a 90 degree angle piece, cut the edges at 45 degrees and be done! The trick is discovering something called GEOMETRY!
Only a welder would think basic geometry is a "trick" lol
*only a youtube "welder"*
dude doesn't even know how to use a speedsquare lol
The keyword 'speed' there seems to have yet dawned on our backyard welders. They may not be fast but they're sure proud of their work! 😂
Not to worry; this guy ain't no welder anyway
Like they invented the idea of 45 degrees 😂😂😂
Welders are smarter than that. This guys is sus
Congratulations, you just passed middle school geometry
Trigonometry! This is angles. Congrats, you just passed as well. 😂
@@TheNarrowPath84 Really makes me wonder what trigonometry is a subset of then! Congratulations to you as well.
@@kibukaj2956ya know I could say your wrong too but I don't wanna be confidently incorrect so I'm just gonna say that this is just basic knowledge lol
@@kash_KIA im never wrong 😎😎
@@TheNarrowPath84 no angles at all: just squares wid diagonal dividing it into 2 right triangles.
wow thank goodness i've never had to make a connection like that in 20 years of fabricating
My friend said he was a fabricator but I think he made it up!
Wow
😂@@whetstonemistery
Exactly lol
He should let 1 angle bar go through between 2 angle bars. I dunno how to explain because of my english. Do I correct?
You only have to cut two to make it a more solid connection 😂
Been a toolmaker for 40 yrs, "Why the heck did he cut 4 pieces.?"
@@kwkstar: I don't know, but it looks awful flimsy to me, unless it is for decoration.
@@kwkstarab olut ly biN5 it would b u there are cjn mounting Arfimljt the i m I will kv I Gj4mt
Hlo t2klow tiolman the card for vkf c ouk b u ❤️ e frl ff ktkv2k ...m in ifak the Hom n5v
@@kwkstarfluk b h2 the 4to mount r jtfak kit and avjbtcn the urak the aho b clil n 🌎 g2rgw f the t tti4
The ruler being completely misused is my favorite part of it. Might as well use a random piece of metal if you ain’t gonna measure.😂
Only the first mark was necessary, and yet it got marked twice.
He unnecessarily put permanent marker on ruler 😂😂. And what was that second mark for?😂😂
@@OtakuUnitedStudio No mark necessary at all, just read the markings already on it that is what they are there for!
You could just use one straight through and cut the other on angles... would be stronger.
The welded points are stronger than the original metal if done properly, so no it's not, and also geometry.
@bahamutzero4903 if it's stronger than the original then wouldn't his point still stand? Now you've got 1 solid bar and only 2 extra strength welds. Saved time and its most likely stronger too since you can put more effort into the side pieces than all of em.
Isso mesmo.
Welding isnt carpentry. The welds are stronger than the material itself.
Exactly..
Welders don't do that because it's much easier and faster to do one single 45° cut on each piece , on a saw , accurately, with measurements. And then the other ends of your steel angle don't end up short or long and cost you even more time
So basically coping them like trim?
Stack the four pieces and make two cuts. Time is money to a good welder.
Not all welders would call this a trick.
Correction; no welder would call this a trick…..😮
@@nonhatespeech I've been told by some people that they can weld and are welders....
I think no trick will call this a welder also😂😂😂
Just common sense...
Not all welders would call this welder a welder
This youtube channel should be called "How to do everything the hardest possible way"
Like "common core fabrication".
Haha thats right
like marking the very scale,☆;
Actual curiosity cuz I don’t do this kind of work and it seemed fine to me, but what would be easier to do than something like this to fix the aligning issue?
@@AzarathMetreonI think it's be stronger to no cut one piece and only cut two at the 45 degrees angel. though I am not a welder just a swimmer.
I'm glad he tried to put them together so many different ways
Yeah that was so frustrating to me. I looked for this comment and now blocking the channel
There might have been ways!
But as it turns out, there are no ways.
...until now...
Nice
The most important part is waving his finger.
That's just him proving he still has that finger left@@Elfcheg
A welder wouldn’t tell you because he’d expect you can figure out something as simple as this on your own
Простое? А теперь представьте, что таких соединений надо сделать 50 штук...
I have absolutely zero experience in welding, but the welding community on TH-cam shorts is absolutely the best no matter what a person does good or bad somebody always has something to say differently, which is awesome. 😂😂😂 and so funny
Reading the comments is good fun
Tungsten rod stick measure contest😂😂😂😂😂😂
8
That's the world of skilled trades.
Nah this guy making the videos is just a moron, bad 'tips' and shit nobody would ever need or will ever use in fabrication.
How to mess up your steel ruler instead of using a piece of paper for a simple job 👏
How is this messing up the ruler?
by just marking it ,☆;
Trysqure is one of the very first basic layout tools. No measuring, no thinking, just mark your 45's and crack on.
Внезапно оказалось:
arccos(x) в градусах = 35.2643897
Could you post this in Russian instead of being insensitive to our Slavik brothers?
@garystinnett8321 Sorry, I do not know how to post in other languages. Lots of website comments have a way to click on a translation link. I do not know how it works. I wish I could help. It would help me sometimes. If there is someone out there that knows how to make translations work, please help us communicate, and thanks so much. May GOD bless you all today.
Good job
@@garystinnett8321Trysqure - это один из самых первых базовых инструментов верстки. никаких измерений, никаких размышлений, просто отметьте свои 45 и двигайтесь дальше.
So it's not a skill issue, it's a brain issue.
You've discovered basic geometry.. Congratulations!
They have speed squares for this, but nobody would weld four angle irons together like that.
Достаточно было на двух уголках убрать полки на 45° а уголки в стык сваритьи два наложить по месту стыка прочнее узел и меньше обрезков😅
Лёгких путей не ищет
Vou acreditar que ele não tinha uma peça maior...😂
🤣🤣🤣👍
Ты ничего не шаришь в эстетике 😅
Поддерживаю🖐️
You didnt have to do all that. Measure the end, mark the same measurement up the length, connect the dots. Alternatively, just measure a 45 degree angle
You have to sacrifice some part of you to adjust with the people around you
Просто реж каждую сторону уголка под 45° используя угольник и всё. А линейку оставь для члена. Пользуйся!!!
😂молодец сказал четко
@@user-hn7fp2wh2q долго смеялся?
Не под45° а под 22,5° и всё получится. Учись?
I didn’t expect that translation 😂
@@user-sf6nl3zl1y45° надо резать
А прсто два уголка обрезать не судьба , надо работы себе добавить . Круто .
Мы не ищем легких путей .
И при вашем варианте конструкция будет жёще.
Я всю жизнь в строительстве,работал в разных сферах,в том числе на производстве металлоконструкций. Но ни разу не видел подобного,куда оно и зачем?😁
Только хотел написать. Согласен с Вами.
Он тем самым ослабил конструкцию!
Essa situação me parece inexistente. Se for necessário uma emenda cruzada, fazer os encaixes em 2 peças, basta.
"Not all welders are willing to tell you this trick"
Common sense and geometry : 🍷🗿
Now we know what wolverine been doing in his spare time. Making X's
Name the circumstance where this joint applies
It would probably only be for something decorative.
When I have nothing to do, I take a welding machine and weld all sorts of useless stuff. Such a connection is simply necessary in my case.
Always vital when you're welding skyhooks
I've seen it used for shipping spiders inside small diameter stacks. But anything bigger than 3' diameter, we'd use square tubing welded to a blank round.
Decorative?
Thanks for smoothing out that tip so quickly. Kept the ocd at bay.
I like how he eased the tip in. 😏
Yeah, that was going to be a problem for me. It’s like I felt sick for a second and he instantly gave me medicine.
This is like "only 1% of the people can resolve this" ads
Tanpa kata-kata tapi mudah dipahami.. Terimakasih saudara telah berbagi ilmu
Отметить маркером на линейке? А че не на лбу у себя?
Wkwkwk
Bahut khub lajawab
Why you tried the other two thinking they were gonna work was wild.
FINALLY, someone who understands kerf when cutting on a line 😭 god bless you
Там можно только 2 подрезать и взять один цыликовый а так это двойная работа
Я тоже хотел так написать, но….😊
да и даже крепче соединение выйдет ))
цЫлый?!!!
@@maksichek да именно так😐
Зачем делать лишнюю работу? Достаточно обрезать два уголка.
И узел будет крепче😂
Это называется смекалка, не всем дано 😄
@@Kreuzritter84 если б мне пришлось делать такую крестовину я б точно обрезал два уголка.
Для контента, что комментов больше было😜😜😜
That's not a trick, that's common sense.
I'm a CNC operator, but I do welding at home as a hobby, your tip was amazing, I learned a lot by watching your short videos. Thank you, from Brazil.
На каждое изделие нужна новая линейка😂
Omg. You cut ALL the lengths? That cannot be the way to do it, to rely totally on the weld.
2 would've done the same thing
You're relying on the weld 1 way or another
So glad he shook his finger otherwise I would have lost my way.
My right ear really enjoyed this vid
Напишите кому в жизни нужно было стыковать 4 уголка ?
Нужно было и больше, просто не в одной плоскости.
Максимум 3
Fun fact! 45⁰ angles share 2 same lengths to make a 90⁰ angle (which you can see).
Next time, simply measure side tip and measure the same at it's length and you'll get your 45⁰ angle cut.
Muito obrigado 🇧🇷 thank you very much
ΤΗΝ ΓΩΝΙΑ ΤΟΥ ΣΕΝΤΣ ΤΙ ΒΡΗΚΑΤΕ ΤΙ ΜΕΤΡΑ ΚΑΙ ΤΙ ΡΑΨΕ ΚΑΙ ΚΛΑΨΕ ΜΙΑ ΦΑΛΤΣΟΓΩΝΙΑ ΣΗΜΑΔΕΒΗΣ ΚΑΤΕΥΘΕΙΑΝ 45* ΚΑΙ ΕΤΟΙΜΑ ΟΤΑΝ ΔΕΙΧΝΗΣ ΚΑΤΙ ΜΑΣΤΟΡΑΚΙ ΜΗΝ ΜΠΕΡΔΕΥΗΣ ΤΟΥΣ ΘΕΑΤΕΣ ΣΟΥ ΚΑΙ ΤΑ ΣΗΜΑΔΕΜΑΤΑ ΓΙΝΟΝΤΕ ΜΕ ΠΡΙΝΟΛΑΜΑ ΦΑΛΤΣΕΤΑ ΣΙΜΑΔΕΥΤΗΡΙ ΚΑΙ ΜΟ ΜΟΛΥΒΙ ΣΙΓΑ ΜΗΝ ΒΑΛΗΣ ΚΑΙ ΚΙΜΩΛΙΑ Ε ΜΑ ΚΟΨΤΑ ΣΕ ΕΝΑ ΠΡΙΟΝΙ ΣΤΟ ΦΙΝΑΛΕ ΒΑΛΕ 45 ΝΑ ΤΕΛΕΙΩΝΟΥΜΕ ΑΦΟΥ ΘΕΣ ΟΡΘΗ ΓΩΝΙΑ Η ΣΤΣΥΡΟ ΟΠΩΣ ΕΚΕΙ ΤΟ 90 ΓΙΑ ΝΑ ΒΓΗ ΒΑΖΗΣ 45 ΚΑΤΑΛΑΒΕΣ ΜΘΑ ΦΑΛΤΣΟΓΩΝΙΑ ΚΑΙ ΤΕΛΕΙΩΣΕΣ ΓΙΑΤΙ ΕΓΡΑΨΑ ΠΟΛΛΑ
Очень! ну очень позновательное видео))
Are you sure it’s a 45° angle? I don’t think it is
what's a side tip
When u have a gas cutter in your garage u don't need a grinder...
That's not a trick. That's common sense.
Very nice!
Personally I use a small chop saw for ends.
I bought it to cut piping and with a few jigs it’s turned out to be a real time saver.
Thanks guys 🇺🇸👍
You are helping a lot of people with welding tricks your videos are really informative.
Сам себе написал
This is garbage.
It's great that he is putting out videos.... He is showing people the incorrect methods of welding!
8 cuts instead of 4, pure genius!
Not even a welder and I'd join them this way 😂
Why bother with cutting all 4? You just need to cut two sides, just gotta keep the material thickness in mind, but the gap makes for a great trough for the weld to go into
Yaa. I think that thoo
That equal distant way he has makes for a longer vid, more people figure what other stupid ways he cuts metal. Most importantly is he gonna weld ever correctly
@@fev3rd I think you are correct. It's not about teaching anything properly anymore, but how to maximize views and engagement. A good reputation doesn't even matter anymore.
Same people that think 1/2 is not equal to 2/4..a reasonably good burner could cut those faster and with no marks.
Можно было всего два уголка подрезать!
Да! И конструкция получилась бы, наверное, более прочная.
Dude is basically earning abusing the biological impulse of every tradesman (specially American ones) to tell everyone does a shit job except them.
Had a boss tell me to keep my nose to the grindstone, to this day I can't smell anything.
Вау!!! Вот э трик... Айм писсинг май пэнтс оф!!! Чё там по жёсткости данного соединения и где его применить.
Decorative metalwork, not structural.
А почему нельзя взять один целый уголок или хотя бы его сварить и остальные два по ьокам просто подогнать и приварить?. Чем все к подгонять. И я уверен что жто не так идеально булет слелать как на видео.
This is no welder, this is a metal smith
At 12:52am, I am watching this
Once again, a weld you will never run into
You probably are not the creative type are you.
@@Tom-og7fi no, we just dont do things in the hardest possible way even when we are just tinkerng
@jackradzelovage6961 what is your hurry.
А нельзя было одну перекладину зделать сплошную, А два кусочка уже к сплошной подогнать.
Exactly.....
То не интересно...коментов бы небыло ..
Never would I thought of this. What a genius
I never knew that i'm 67 old men can always learn things , thank you sir
Mis Respectos al señor muy habilidoso eso ni quien se lo quite felizidades
😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊
Wow nice work brother.,👌
Es hätte gereicht zwei im winkel zu schneiden
Wäre so auch stabiler. Auch die 2te Markierung ist nicht nötig
@@thorstenback5623
It would have been much much stronger if he had started with just 3 pieces of metal. One really long piece plus 2 shorter pieces.
Estoy de acuerdo.....
Pulls out sharpie 52seconds later after showing us every possible combo he could
Еще более надежно будет если 2 рейки скрепить не отпиливая, а только 2 отпилить
Вот уж действительно. Блин, Архимед!!! Зачем просто, когда можно сложно. Как говорили раньше: в гамаке и стоя ...
😅
Would’ve never thought to put them together and weld it. Wow, thanks! 🙏
Wow he used an angle grinder to grind out some angles. Such a life hack.
And still forgot to make a 45° angle on the edges to allow the weld to go all the way through 🙏🏼
If a welder refuses to explain this trick, go learn from a real welder 😂
Thats the metal version of basic wood jointery. A welder doesnt tell you, because a wood worker will.
I’m a welder and this man needs to take geometry class again
There definitely another way to do that unless your working with angle iron that's to short.
You only needed to cut 2 of those 4. Weld the first 2 together. Then cut the others and weld them on top. Save you some time
Simples e prático. Muito bom.
That’s not a trick… that’s common sense and knowledge
Я уверен, что все сварщики, которые прошли курс обучения, а не купили диплом, знают и про это трюк, и про все остальные "удивительные" фокусы.
-How many welders do you need to do a job?
-27 ; one to do the job and 26 to argue 67 different ways to do the same job xd
As a professional welder for 25000 years
I can assure this is a top tier secret...
Smart minds always have the ability of solving problems👍
The measuring wasn't necessary. Put a Tri-Square on there and draw the 45 degree angle from the end. It's wrought iron, you can probably just eyeball it.
But it's not a 45°, nor is it wrought iron.
@@philthycox2515You are right, it's not a 45, but you can still just draw the correct angle from the point, you don't have to measure all that. If he is making more than one, he could make a shop aid template.
My bad though, it is Mild Steel.
Cameramen last me गुस्सा ho gaya kiya???😂😂😂
Now, for my next trick, i will weld on this unprepped surface!
سبحان الله وبحمده، عدد خلقه ورضا نفسه وزنة عرشه ومداد كلماته ".
(إِنَّ اللَّهَ وَمَلائِكَتَهُ يُصَلُّونَ عَلَى النَّبِيِّ يَا أَيُّهَا الَّذِينَ آمَنُوا صَلُّوا عَلَيْهِ وَسَلِّمُوا تَسْلِيمًا)،[١]
كثرةُ الصَّلاةِ على النَّبيِّ مُحمد ﷺ تفتَحُ أبوَابَ الخيرَات 🤍
( فَقُلْتُ اسْتَغْفِرُوا رَبَّكُمْ إِنَّهُ كَانَ غَفَّارًا )
"not all welders are willing to tell you this trick"
ah, yes
the mysterious trick known as *M E A S U R I N G*
Welcome to high school geometry. Now, take out your pencil.
Most people do not really know what welders do. Small things like this is just done by someone with a welding machine at their house or workshop.
“Not all welders are willing to tell you this trick” because it’s useless lol bro. No one needs it.
Caption should read: If you don't have the common sense to figure this out, you shouldn't be welding in this first place. -telepone, tele friend, tell a Fitter.
Woooaaahh.. He... He measured something.. and.. and he even marked it too.. I havr never seen a welder do this before, just incredible.
Oh cool
I always wanted to learn how to do that. Thank you for teaching me. 😊 ❤❤❤
Im drooling over this bro i need to try and weld it
Better yet, join just two opposite sides to a non-cut continuous angle.
These comments prove that welders are some of the most insulting people ever. Even if you do the perfect weld, they’d still say “meh, I could do better” with no constructive criticism.
Maybe because the way he did it is fundamentally dumb if you know anything about anything.
@@kingtiger3390 If you know anything about anything, you’d know that I am joking about the stereotype of “welders always insulting others’ welds”. I wasn’t even talking about this short anymore, I was just making a general joke. You took this way too personally and it’s telling of your chronic internet addiction
Круто. Теперь надо придумать как это всё сварить, чтобы в итоге получилось ровно.
Who else waiting for part 2, with explanations of making marks on ruler?
How about just cutting the edges to the angle of the piece divided by 2? This is a 90 degree angle piece, cut the edges at 45 degrees and be done! The trick is discovering something called GEOMETRY!
Just put 2 on the side of a solid one for a stronger weld.
👍👍👍 experience and practice makes you successful.😊
The first thing you do is get one continuous piece, then weld the other 2 perpendicular ones to it.
Geniuses are able to do what their teachers couldn’t teach during lessons 😊🤜🏽🤛🏽