Know that sticking welding-rod and burn-through from more that 40 years ago! Solution? Might suggest a gasless-MIG would deal well with this thin material even in the hands of a relative beginner.
Cheapest mig weldding is almost double the price of well known stick weld, and the gasles wire ain't readily available in most hardware stores, i really wan to buy it if those reasons not hold me back
Нижнее положение 40а хватит за глаза, точка ставится на следующей точке, можно и сплошным если выставить минимальный ток для электрода и вести быстрее а не жарить на всю. И второе на профиле стенка точно не 0.7.
Gostei desse aprendizado.... é um pouco complicado soldar tubo de 2mm, mas com essas dicas fica melhor. Brazil
Thanks for sharing, another knowledge for me
Know that sticking welding-rod and burn-through from more that 40 years ago! Solution? Might suggest a gasless-MIG would deal well with this thin material even in the hands of a relative beginner.
MIG welding is expensive and the gas is not available everywhere.
@@naumanahmadtariq8717He said gasless
I would like to but, buying a set of MIGs would cost me a lot of money.
I would like to but, buying a set of MIGs would cost me a lot of money. It's quite expensive here in the Philipines tho
Cheapest mig weldding is almost double the price of well known stick weld, and the gasles wire ain't readily available in most hardware stores, i really wan to buy it if those reasons not hold me back
very very very nice..im a beginner..this video helps me a lot
Quick touch and go. Give each burn a few seconds to cool. Build on the last deposition of electrode metal.
I’m all in
Muy claro el ejemplo de las cuatro técnicas
Try 1.6mm stick at 20Amp
you're probably right. That was my first thought.
The smallest I have available is 2mm so this was helpful for me
Grind off the galvanise !!!!!
큰도움이됩니다
Thank you for sharing
Thank you again friend, I hope it's useful
Excellent
Nice! Helpful, thanks!
thank you again, hopefully useful friend
ang laki nman nang sadakyan
Çok açık layaci teşekkür
Can almost smell the zinc fumes in the video. How was the metal fume fever that night?
I saw a welder welding a bunch of galvanized without a respirator. He said it’s ok I’ll drink a lot of milk tonight. It binds the zinc. lol.
Very nice, thank you.
¿Eso fué con Polaridad Directa?
Tq, good sharing
lovely
Thank bro
Thanks again brother
most hardware here do not sell 2mm..that is my problem
Jangan buru2 bang ngasih tutorial😅 3:54
Thanks
thanks again guys
👍👍👍👍
thats right very good
Xem bước thứ 4 đúng nhưng tay nghề bạn còn hơi kém
Good
Thank you friend
Nice one
Класс
Luar biasa bro
yes
Нижнее положение 40а хватит за глаза, точка ставится на следующей точке, можно и сплошным если выставить минимальный ток для электрода и вести быстрее а не жарить на всю. И второе на профиле стенка точно не 0.7.
Спасибо большое, профессионально показал. 👍🙏
You nid to lowering the amp
Forgot to make V groove before the start of weld.
Best stick welding instructor on TH-cam 👍helps me a lot with important tips and techniques
NO, NO, N0. SMALLER ROD, LOWER AMPS.
Tebal itu besinya bang
❤❤❤
👍
Try 1.0mm stick at 10Amp 😂
Try 1.0mm stick at 10 amp❤
Excellent work
0.7= Fluxcore the best😅
Dangerous amateur stuff. Never weld galvanized steel without grinding off the zink plating properly. Poison.
Only someone who has never professionally welded galvanised house frames would make that statement.
Hahahaha😂😂😂😂😂
Auto Suscribe bang like tks sdh mampir di chanel sebelah. Keren
🤦♂️
큰도움이됩니다