Now there is a war going on in my motherland. The war has changed all our peaceful lives. Ukraine is fighting russian fascists who are killing children and destroying peaceful cities. The fate of the free world is decided on my homeland.I hope we stay alive. I wish everyone never to see what we see now.
Brilliant video. Couldn’t have done this without it. This is the craziest piece of bike gear I’ve ever come across. Turns a basic rear wheel puncture repair into a complex nightmare.
Sadly, they expect you to take it to a bike shop! Not fun when you discover the situation you can find yourself in when you get a flat on a dark, cold and rainy night! Even bike shops will have a WTF moment if they're not familiar with this hub. Somewhat helpful... Shimano Alfine-8 part list: si.shimano.com/pdfs/ev/EV-SG-S7000-8-3810.pdf Shimano Alfine S7000 series manual: si.shimano.com/pdfs/dm/DM-SG0004-02-ENG.pdf
Just before a total mental breakdown I found this video. It's so simple but still I see red and yellow dots spinning around. Thanks for this excellent example.
Thanks for making this video. I had taken the wheel out of my bike because I had a flat tire. When I wanted to reinstall it, i was faced with the problem with the switching mechanism. But thanks to your video we made it happen. Thank you from Belgium!
Thank you. Tried 3 days to install after taking out the wheel. Looked at your video and was able to reinstall in 10 minutes following your steps. Great video and thank you.
thank you so much for this video, i struggled for 3 hours to put the gears back together unsucessfully, then i found your video i was able to put it back together straight away and worked, thank you
Thank you so much. My brothers bike had a flat tire and when we replaced this the pin with the yellow dot twisted off and without this video we would not have been able to get the gears lined up.
Superb video, solved my problem after trying a dummy run in my garage to remove and replace the rear wheel. With your help managed to do it successfully. Thanks very much.
You saved me from going totally insane! I photographed how it looked before removing everything, since I've done it before and know how idiotic it is, but this time it didn't work however I did. Then I checked this video, and it's insane how 5 of your seconds saved me hours of struggle. Enjoy your coffee.
Thank you for this video! I was trying to change my rear tire and didn't realize I needed to unhook the shifting cable before the dots on the lock ring would line up.
Thanks mate, worked well. If anyone else was being a t*@# like me and had it reassembled but then couldn't figure out how to get the tension back in the cable, run the cable the other way round, duh. My minor additional tips: 1. The newer alfine 8's look different to the one in the video but the principle is the same. Mine does NOT have the 3rd red dot at the top of the inner most part, but there was a little round recess in the plastic, line the other 2 red dots up to that instead, with the yellow dot to the left of them as is shown in the video. 2. Might be a bit silly to point it out but it's not visible in this video; the sticking out cable guide bit points towards the front of the bike so put the part on with the red dots lined up with the guide pointing to the front. 3. About the cable run direction for final tension. If the bike is upside down you run the cable under and round towards the floor then back up into the hold, if the bike is right way up you run the cable over the top.
Thank you for doing this video. You really saved me. After coming in from a 20 mile ride I decided to wipe the bicycle down. Must have bumped it with the polishing rag because the lock ring came undone along with the other parts. Anyway I had it back in order within minutes after watching your fine instructional video. You sir are a Prince.
I HAVE ORDERED THE HUB FROM ONLINE MARKETING SITE AND IT DID NOT CAME ALONG WITH THE SMALL PART KIT ...SO I DON'T KNOW WHERE TO FIND THAT EXACT SERIALKIT BECAUSE I HAVE TRIED TO ORDERED THE SMALL KIT WHICH WAS AVAILABLE ON AMAZON BUT IT DID NOT SEEM TO BE CORRECT ......PLEASE HELP ME .....COULD YOU PLS HELPL
Thank you so much for such a clear and perfect instruction! It took me a while to understand (specially the part where the alignment has to be done only at 4th gear). It worked out at the end!!
Had to watch it a second time, but it is actually really clear. Heads up for those with a slightly newer model (with the longer rubber housing) I believe the length from the end of the rubber to the middle of the nut should be 127mm (longer than the style of housing shown here).
Привет из Германии! Очень чётко и понятно. Как говорится: Без слов! Grüße aus Deutschland! Sehr klar und deutlich. Wie man so sagt: Ohne Worte! Weiter so!
Bonjour ici la France je vous dis a grand Merci pour votre vidéo vous m'avez donné un grand aide pour changement câble👍 et réglages de mon Electra cruiser 8
Спасибо Андрей , Это лучшее видео демонстрация решения проблемы из всех, что я смотрел на Ютюбе. Ясно без слов, четко , понятно с 1го раза,. Побольше бы таких спецов. Спасибо за экономию моего времени и денег
Now there is a war going on in my motherland. The war has changed all our peaceful lives. Ukraine is fighting russian fascists who are killing children and destroying peaceful cities. The fate of the free world is decided on my homeland.I hope we stay alive. I wish everyone never to see what we see now.
So sorry about what is happening. It is beyond horrible. I hope you, your family and friends are all safe.
This helped me fix my son's nexus 7! Slava Ukraini!!! stay strong!!
طح
in support of you and your excellent work, I will join your channel for a while. Best wishes to you from Virginia, USA.
@@makkie12 america do not make it sla, it does make it slave.
Brilliant video. Couldn’t have done this without it. This is the craziest piece of bike gear I’ve ever come across. Turns a basic rear wheel puncture repair into a complex nightmare.
Well I for one am here because my basis rear wheel puncture turned into a complex nightmare 😅😭
I spent hours trying to do this after stupidly removing the rear wheel of my bike. You couldn't have been clearer. My friend, you're my fucking hero!
You're the best. I'm wondering how Shimano's engineers imagined we would figure out without this type of instructions ! THANK YOU
Sadly, they expect you to take it to a bike shop! Not fun when you discover the situation you can find yourself in when you get a flat on a dark, cold and rainy night! Even bike shops will have a WTF moment if they're not familiar with this hub.
Somewhat helpful...
Shimano Alfine-8 part list: si.shimano.com/pdfs/ev/EV-SG-S7000-8-3810.pdf
Shimano Alfine S7000 series manual: si.shimano.com/pdfs/dm/DM-SG0004-02-ENG.pdf
Absolutely excellent. Very clear. I took the wheel off to change a tyre and couldn't work out how to refit all this. Now I can. Thank you!
You... my friend... are a true hero. HOURS spent trying to figure this shit out, and you saved me further hassle. Thank you for posting this!!!
Just before a total mental breakdown I found this video. It's so simple but still I see red and yellow dots spinning around. Thanks for this excellent example.
How simple it can be when you can follow somebody who know how to do it! Many thank’s from Sweden!
Dear Andriy. I return to you twice a year, when changing tires for the cold/hot season. Best guide on the internet. Thank you!
I thank you too!
Love this video. No nonsens, just on point showing what to do. Thanx!
Thanks for making this video. I had taken the wheel out of my bike because I had a flat tire. When I wanted to reinstall it, i was faced with the problem with the switching mechanism. But thanks to your video we made it happen. Thank you from Belgium!
Thank you. Tried 3 days to install after taking out the wheel. Looked at your video and was able to reinstall in 10 minutes following your steps. Great video and thank you.
I did only 2 days so far so that s why am here
Hätte nie gedacht, dass man ohne Worte ein solch großartiges Video, so kurz, eindeutig und klar präsentieren kann. Vielen Dank! 🎈😊
thank you so much for this video, i struggled for 3 hours to put the gears back together unsucessfully, then i found your video i was able to put it back together straight away and worked, thank you
Thank you so much. My brothers bike had a flat tire and when we replaced this the pin with the yellow dot twisted off and without this video we would not have been able to get the gears lined up.
Thanks a lot - I was able to repair the bike, my daughter because of the very good, step-by-step instructions.
Brilliant video! Perfectly clear without words - anyone can understand it, anywhere in the world.
Sie sprechen mir aus der Seele... 🎈😊🦉
Thank you, that helped me a lot putting my mom's rear gears together again after fixing a flat tire. Never took this type of gears apart before.
Superb video, solved my problem after trying a dummy run in my garage to remove and replace the rear wheel. With your help managed to do it successfully. Thanks very much.
You saved me from going totally insane! I photographed how it looked before removing everything, since I've done it before and know how idiotic it is, but this time it didn't work however I did. Then I checked this video, and it's insane how 5 of your seconds saved me hours of struggle. Enjoy your coffee.
Thank you so much! I accidentally took this apart when trying to get my rear wheel off for the first time. At least now I know how it all works!
Me too! The bike shops around here are 2 1/2 weeks out. Messed with it for an hour or so Friday. Took about 1 minute with this video. THANKS!
me too!
Thank you for this video! I was trying to change my rear tire and didn't realize I needed to unhook the shifting cable before the dots on the lock ring would line up.
Гениально, шеф! Ни единого слова, и все понятно. Настроила за минуту. Спасибо!
Thanks mate, worked well.
If anyone else was being a t*@# like me and had it reassembled but then couldn't figure out how to get the tension back in the cable, run the cable the other way round, duh. My minor additional tips:
1. The newer alfine 8's look different to the one in the video but the principle is the same. Mine does NOT have the 3rd red dot at the top of the inner most part, but there was a little round recess in the plastic, line the other 2 red dots up to that instead, with the yellow dot to the left of them as is shown in the video.
2. Might be a bit silly to point it out but it's not visible in this video; the sticking out cable guide bit points towards the front of the bike so put the part on with the red dots lined up with the guide pointing to the front.
3. About the cable run direction for final tension. If the bike is upside down you run the cable under and round towards the floor then back up into the hold, if the bike is right way up you run the cable over the top.
Thanks very much spent 3 hours trying to put gears back together after watching this did it in ten minutes thanks Jim
Thank you for doing this video. You really saved me. After coming in from a 20 mile ride I decided to wipe the bicycle down. Must have bumped it with the polishing rag because the lock ring came undone along with the other parts. Anyway I had it back in order within minutes after watching your fine instructional video. You sir are a Prince.
I HAVE ORDERED THE HUB FROM ONLINE MARKETING SITE AND IT DID NOT CAME ALONG WITH THE SMALL PART KIT ...SO I DON'T KNOW WHERE TO FIND THAT EXACT SERIALKIT BECAUSE I HAVE TRIED TO ORDERED THE SMALL KIT WHICH WAS AVAILABLE ON AMAZON BUT IT DID NOT SEEM TO BE CORRECT ......PLEASE HELP ME .....COULD YOU PLS HELPL
Thank you so much for such a clear and perfect instruction! It took me a while to understand (specially the part where the alignment has to be done only at 4th gear). It worked out at the end!!
Nice and clear and making a complicated and fiddly job easy to understand. Much better than the official documentation! Thanks!
You sir saved the day. Exactly what I needed in order to assemble the Inter-8. Have a good day!
It's so easy when you know how. Thanks for the tutorial Andriy!
Крутяк, немного запутался когда собирал механизм переключения, но Ваше видео расставило все точки , спасибо большое
Had to watch it a second time, but it is actually really clear. Heads up for those with a slightly newer model (with the longer rubber housing) I believe the length from the end of the rubber to the middle of the nut should be 127mm (longer than the style of housing shown here).
Yep! This is the dealer manual with the 127mm length mentioned on p.31! si.shimano.com/pdfs/dm/DM-SG0003-06-DUT.pdf
ありがとうございます。調整方法が分からず困っていましたが解決する事ができました。
Really thank you so much. I thought I broke something but thanks to your video it seems I just did not know to tighten all of this together
The best quick and simple video I have seen on this work . Brilliant 👍
Thanks Andny. I have returned to your instructions time and time again. Awesome.
Super Video! Ohne Worte, ohne Musik, nur gute Pädagogik!
Many thanks for this video mate! Nice explanation of what’s really happening with the gearbox and how to properly align it. Well done..👍
After 3 different videos..this was spot on. Now it's finally fixed..so easy.. Thanks!
EAXCTLY what I was looking for, I've spent so much time trying to put the wheel back together, Дякую!
Fantatstic, just bought a bike with an Alfine hub and this tells me everything I need to know!
Super video, no talking, the whole planet can watch!!!
Thank you very much. I spent 40min and literally gave up, until i saw your video. Thanks for that!
40 minutes? I just spent a couple hours!
Awesome video, it took just 1 minute to adjust my alfine 8 after i watched this video! Big thanks! Дякую!
Perfect. I tried and tried and tried.... Watched your video and boom, it worked . Thanks a lot. 👍
If I did not know what the following words mean to you nowadays, I would say your video is a life saver.
very useful information. Thank you Andriy :) I fixed my shimano nexus cassette with your guidance. Kudos for you💯
No words needed, thanks a lot from Italy.
Спасибо! Не знал, как снимать тросик и натягивать эту бонку, а тут как раз все показано. Во 👍
This is exactly what I was looking for. Good work, thanks!
Thank you soooooo much. Had a flat and spent 2 hours changing and gears did not work after.
I spent 2 hours trying this out and then 1 minute thanks to you. Heartfelt thanks!!
th-cam.com/video/qpHQdSvLQj8n/w-d-xo.htmlb'
Thank god, I‘m not the only one who suffered that long before this video finally brought the solution🙄😬
Sup. from Estonia! One of the best videos, thank you stay safe!
This is one of the best instructional videos I've ever seen. Thanks for the help 🙂
Good video that completes other vids on rear wheel removal. Thanks and hold on.
Привет из Германии! Очень чётко и понятно. Как говорится: Без слов! Grüße aus Deutschland! Sehr klar und deutlich. Wie man so sagt: Ohne Worte! Weiter so!
Обычно не пишу коментарии. Но тут,БОЛЬШОЕ ЧЕЛОВЕЧЕСКОЕ СПАСИБО
thanks Andriy.. I wish you peace..greetings from Croatia !!
TH-cam really need more youtubers like you sir 👍
Thanks !
Спасибо, добрый человек! 🙏Час тупил пока не посмотрел видео.. и вуаля! Все работает!
Thanks so much. All day on this thing, i was close to giving up. Perfect vidéo. Slava Ukraine.
The onyly video, wich shows whats important. Welldone Pro ... THX!!!
Merci pour cette vidéo claire. Il m’a fallu 5 minutes pour remonter le moyeu alors que je halerais depuis 2 heures.
Many thanks from Finland and all the support with the fight againts the devil ❤❤
Thanks I was able to get the damn thing together because of your video.
Bonjour ici la France je vous dis a grand Merci pour votre vidéo vous m'avez donné un grand aide pour changement câble👍
et réglages de mon Electra cruiser 8
Merci d'avoir regardé la vidéo
Je pence que ce shimano et une movaise affaire
This video saved my bacon more times than I can count. Thanks.
Everything for you @}->--
Спасибо Андрей ,
Это лучшее видео демонстрация решения проблемы из всех, что я смотрел на Ютюбе. Ясно без слов, четко , понятно с 1го раза,. Побольше бы таких спецов. Спасибо за экономию моего времени и денег
So much better than the Shimano manual! thank you! Stay safe.
THANK YOU!!!
This is EXACTLY the video I need!
You’ve saved my bacon!
That was very helpful! Thank you for sharing this!
Thanks pal. You just saved me a lot of aggrevation figuring that out from the useless Shimano instructions. Gracias..
Дуже гарно, вдало і доходчево показано, не могли зробити самі а це відео дуже допомогло
thank you very much for the tutorial, it helps me to install nexus 7 on my bike🙏
clear, friggin perfect, no talking just the facts, you're awesome and a rarity.
Es ist klar und einfach. Vielen dank!
Best ever video to assemble gear cassette ever !! Thanks !! 👍👍👍
best ASMR ever. and i just came here to fix my damn bike
Thanks I wanted to remove my chain but it got stuck and removed this piece. Now it's on !
Danke für die gute Erklärung. Und Frieden!
Thank you very much, I fixed my bike this way 👍👍🥂🥂
Excelente video, Claro, simple, sencillo!, muchas gracias.
Virkelig noget der kan bruges, tak for det
Thanks for the tutorial Andriy!
Muy bueno!. Y sin hablar, gracias!! :)
This video has saved my life today. The bike of my wife is mended :)
Bit of more than I could chew. You're a life saver❤ Long live Ukraine!!
Brilliant video, thank you SO much for the help!
Without Words, its look easely, thx 4 the Vid
Geat mime operformance. Starngely enough I can hear ambient sound, so it's not a silent movie.
Дякую, Андрій! Дуже допомогли
Many thanks from germany!
Einfach sehr gut gemacht - genau, was ich als Info brauche - Thanks and greetings from Bavaria
Thank man! Your instructions saves the day!
Very useful - just sorted my gear malady from this. 👍🏻👍🏻👍🏻👍🏻
الحمد لله انني وجدت هدا الشرح ❤ شكرا لك يا صديقي
Thank you for the video! Before installing the cassette, I notice the sprocket to be a little "wobbly"...
Is it normal?
You're "THE MAN" thank you so much.
Merci beaucoup Andriy
Thank you so much,for this very helpfull video !