I'm teaching myself to change out mine by watching and rewatching this video. It looks really easy!! I change my own own oil, and that's easy, and this looks very simple, if I just take my time with it. I have an 06 Malibu; fairly easy to work on and the parts are easy to reach.
Do I need those new orange rubber covers for my new coil packs my new ones did not come with anything like that just a white packet of dimethylpolysiloxane
Can you tell me how to properly put the plug wires back on. What is the order. Is it just matching 1 to 1 or what is the correct order they go on. Pls and thank you.
I made this video a few years back. From what I remember, I didn’t do an idle procedure…. See below, hope this helps! 👇👇 GM IDLE RELEARN PROCEDURE AFTER THE REPLACEMENT OF THE ELECTRONIC THROTTLE BODY (ETB), THE VEHICLE ON-BOARD COMPUTER MUST RELEARN THE NEW THROTTLE PLATE IDLE POSITION. IMPORTANT After the replacement of the electronic throttle body, the engine idle speed may fluctuate, cause the engine to stall or even turn on the check engine light. IDLE LEARN Perform the following relearn procedure for the on-board computer to adjust to the new idle position on the electronic throttle body. 1. Start and run the engine in PARK for 3 minutes. 2. Turn the engine OFF for a minimum of 60 seconds. 3. Start the engine and run for another 3 minutes. 4. Engine should idle normally after 3 minutes. After having performed the relearn procedure and the engine still does not run within normal idle speed, it will be necessary to drive the vehicle above 45 mph (70 Km/h) including several decelerations. Also ensure that after driving the vehicle, let the engine idle for a minimum of 5 minutes. If the engine has returned to normal idle speed, the relearn procedure is completed. If the idle speed is still erratic or incorrect, restart idle relearn procedure.
I'm teaching myself to change out mine by watching and rewatching this video. It looks really easy!! I change my own own oil, and that's easy, and this looks very simple, if I just take my time with it. I have an 06 Malibu; fairly easy to work on and the parts are easy to reach.
Changing the coil packs are relatively easy, just a little time consuming....Good luck and thanks for watching!
Hmm, this made the most sense. Thanks
Trey Williams...Glad my video helped you & thanks for watching!
beachtroll also, the orange rubber parts, did those come with the coils?
Trey Williams .. yes, they did
Do I need those new orange rubber covers for my new coil packs my new ones did not come with anything like that just a white packet of dimethylpolysiloxane
Can you tell me how to properly put the plug wires back on. What is the order. Is it just matching 1 to 1 or what is the correct order they go on. Pls and thank you.
If you “Google “ 2001 Malibu spark plug wire order it will show a diagram on the proper order….Good luck!
Hi did you have to do an idle learn procedure cuase my chevy corsica 1994 3.1l v6 book says i have too.
I made this video a few years back. From what I remember, I didn’t do an idle procedure…. See below, hope this helps! 👇👇
GM IDLE RELEARN PROCEDURE
AFTER THE REPLACEMENT OF THE ELECTRONIC THROTTLE BODY (ETB), THE VEHICLE ON-BOARD COMPUTER MUST RELEARN THE NEW THROTTLE PLATE IDLE POSITION.
IMPORTANT
After the replacement of the electronic throttle body, the engine idle speed may fluctuate, cause the engine to stall or even turn on the check engine light.
IDLE LEARN
Perform the following relearn procedure for the on-board computer to adjust to the new idle position on the electronic throttle body.
1. Start and run the engine in PARK for 3 minutes.
2. Turn the engine OFF for a minimum of 60 seconds.
3. Start the engine and run for another 3 minutes.
4. Engine should idle normally after 3 minutes.
After having performed the relearn procedure and the engine still does not run within normal idle speed, it will be necessary to drive the vehicle above 45 mph (70 Km/h) including several decelerations. Also
ensure that after driving the vehicle, let the engine idle for a minimum of 5 minutes.
If the engine has returned to normal idle speed, the relearn procedure is completed.
If the idle speed is still erratic or incorrect, restart idle relearn procedure.
@@beachtroll8344 oh thank you very much!!!
How can you tell what numbers to put on the new coil pack
Hey can you create a video on engine mount, and transmission mounts? I have this exact vehicle but 2003
Could this apply to a 92 Corsica too? S as far as the firing order