Good work guys! I recently replaced the exhaust manifold with new gaskets of course on my -97 s70, and for some odd reason the gasket on cylinder 2 would not seat enough. I had to take off the manifold 3 times before it was perfect😅 Seems to be a bastard of a gasket. Anyways, it will be interesting to see if the ol’ 850 regained some life after the service of the head! Keep the nice work up!
Hello neighbors, you look very tired at the end but - great work :) Just a little fine tuning, some bolts here and there and it should run beautiful! Hopefully your exhaust manifold is not damaged...I had to change mine, too.
@cleonvandenanker4264 B5254S is precies onze motorcode. We hebben zeker interesse! Waar kunnen we je het beste bereiken? Of als je die gegevens hier niet wilt delen, wij zijn te bereiken via mus.t.tinkering@gmail.com. In ieder geval alvast dank voor het aanbod!😊
nice video and the inevitable wtf moment when applying the anaerobic sealant 😂 many have wondered about it but it strangely works
Keep up the good work guys! 😊
Volvo actually says to install 2 gaskets on the thermostat housing
See Volvo Service Bulletin 804
Good work guys!
I recently replaced the exhaust manifold with new gaskets of course on my -97 s70, and for some odd reason the gasket on cylinder 2 would not seat enough. I had to take off the manifold 3 times before it was perfect😅
Seems to be a bastard of a gasket.
Anyways, it will be interesting to see if the ol’ 850 regained some life after the service of the head!
Keep the nice work up!
Hello neighbors, you look very tired at the end but - great work :) Just a little fine tuning, some bolts here and there and it should run beautiful! Hopefully your exhaust manifold is not damaged...I had to change mine, too.
Great video, should have put another intake manifold on.
Looking forward to next video, to see what the issue is as did the head gasket kit come with new exhaust gaskets?
Heren, wat is de motorcode? Ik heb nog een inlaatspruitstuk liggen voor een B5254S (2.5 20v)
Indien geinterreseerd laat maar weten.. Groeten, Cleon
@cleonvandenanker4264 B5254S is precies onze motorcode. We hebben zeker interesse! Waar kunnen we je het beste bereiken? Of als je die gegevens hier niet wilt delen, wij zijn te bereiken via mus.t.tinkering@gmail.com. In ieder geval alvast dank voor het aanbod!😊
👍💪
Get a 1 piece gasket from a P1 T5 just have to trim a bit of on one side but way better then those stupid 5 piece
Jongens vraagje hebben jullie de kop ook afgevlakt en waar hebben jullie dat gedaan ?
@rubenverveld9954 We hebben de kop laten vlakken bij Motoren Revisie Weert.
Hebben jullie de locking tool zelf gemaakt ?
@rubenverveld9954 De tool mochten we lenen van Motoren Revisie Weert😄
👍🏻👍🏻👍🏻👍🏻