@@mku4 It basically means you have to set the steering lock to 436 degrees both ingame and in your wheel's software to get the optimal feel. When it's set correctly, the wheel moves 1:1 with what you do, and it also gives you a hard stop (it's called bumpstop) when you turn the wheel all the way.
Hi james Loving the content. Just bought a sc2 pro. Now im after some.settimgs. seen some of your videos but they are old. As in, there's been loads of updates to simucube software and most sim titles since your video. Could you do a video list all sc and in game settings for rf2, am2, rennsport, acc, iracing, f1, ac, leman unlimited. Sorry for the big list. Loads of sims out there and I have most of them 😂😂 Many thanks
Little tip for all your lot. If you ever ask a big TH-cam channel a question sometimes when you click reply YTube will auto fill their channel name but not always. So when you ask your question do it like this @channel name your question Otherwise the content creator will not see your question unless they look through all their comment which isn't possible when they have 100s or 1000s of comments.
Amazing video as usual! Just here to say that you no longer need to have the steering lock set specifically for every car. As long as it’s the same on your wheel and in game and larger or equal than the car’s steering lock, you’ll be fine. This has been confirmed on multiple occasions by Kunos (by Aris, on forums, etc). Just set to 900 or 1080 and you can forget about it. If you then need to fine-tune the steering sensitivity, yous should use the steering lock setting in the mechanical grip section of the car’s setup.
Okay but this is the single most helpful video I’ve watched for improving my pace. And it’s not even from the camera settings. It’s from the steering angle. I thought every car used 900 so here I am on the Ferrari with essentially double the angle wondering why I was struggling so much on slow windy circuits. I’ve managed to get my nurburg time from a 2:01.5 to 1:58.1 in literally 5 laps. Thank you so much!
Hey James awesome video, lots to try out now.. I thought the wheel rotation for PC users was automatically adjusted so the the in-game car rotation matches the sim wheel rate?? Has this changed recently I noticed Jardier and others do the same as u now, set it different for each car now??
Hi James. From the point of view of a real driver I would like to ask you... the damper at zero causes a kind of very intense spring effect towards the center, with no rubber feeling on the track. Is this realistic? Is it like this in a real GT3? Thanks for the content.
what about if i have 4070rtx and 5800x ryzen 3D .its better go low settings like in csgo for smothes play,??? or i can play 5k with ultravide 34LCD 165hz? thx for answer
Can someone let me know the answer around the steering. Can I just find put my wheel at 900 in software and in game and be good? Or do I need to set it per car? I am on PC. Thanks
"Pitch" in camera settings is an interesting one. In iRacing, it instructs you to use that setting to put the horizon at eye level. Which typically means your pitch would be a positive number. YMMV
Maybe someone can help me with this strange issue: Playing ACC on PS4 Pro, go out on track, cockpit view, pause de game -> there's NO "view settings" menu!! I cant view/change FOV or any graphics settings... Someone with the same problem???
Hi, I noticed at the bottom of your wheel base setting ( 1st Bit of your video ) you had, Simucube 2 Ultimate and early access Filters. Is that just something for the ultimate wheel base, as I have the simucube 2 pro and I dont have that setting on my setup. If I should have it, could you tell me in old person's way, ( I'm 70 yrs old ) how to set it up, as I am having alot of problem with my steering wheel and pedals. Thanks Steve P, NZL.
He clearly has no idea about PC gaming "I get 120fps too 160fps which isn't bad but not the best" if your getting 120 to 160fps in this title on a 3070 your doing extremely well
10:19 When you see a the graphical wheel lagging behind, the input lag must be 20 ms at least and could be twice. I never had that with my 49" Samsungs using the 3rd by now apart from a little in DR2, but I saw it often enough on TH-cam and not once I saw a triple-screen setup in sync. I even saw this lag in a SRG-video once (usually he doesn't show the graphical wheel) and even in iRacing. I never had a tiple-setup also for that reason, so it's just an impression. Almost all people deactivate the graphical wheel probably for that reason, because when the wheel is in perfect sync, it doesn't annoy and getting covered perfectly by the factual wheel anyway.
Thanks for that, All of a sudden I as down to 24fps and game was unplayable. Seems a setting I couldn't find was really messing with the card and I got it back to 80fps. Found this, tried it and now I get 240fps. This is on a 3060ti.
Hello James, I have had the dd pro setup for acc. I have tried every combination of settings but I get extreme oscillation. I need help its killing me.
Hey guys , eventhough i did set the correct rotation setting for the mclaren 720s in both driver and game , the wheel in game doesnt match my wheel , help pls
I thought the wheel rotation and steering lock will automatic change from different car. So you need to do this manuel depending on what car you are driving
@F AD when he said that I was like wtf is he on about. Clearly doesn't realise 120 to 160fps on ACC is insanely good and on a 3070. I have a 3080 and 9700k and I don't get anywhere near that
Hi James, thanks for the video guide. I've looked to replicate your settings onto my SC2 Pro, but still experience some quite violent wheel oscillation on straights which is amplified if I remove 1 hand and more so if I remove both. Any ideas/tips on how I can remove this through settings changes? Appreciate any tips.
Guauuu buenísimo perfíl para mi simucube 2 pro, me siento muy muy bien así. Me preguntaba si tienes perfíl para assetto corsa, sería genial que lo compartas.....
awesome video, im more of an iracing guy, but i do dabble with ACC from time to time, gonna apply some of the settings for sure, not longed coped some heuskinveld sprints, and ive pretty much got the same as you already apart from, im at 38 on the break witch feels about as good as it needs to be. good luck over the weekend 🦾
Thanks James! Although I have Automobilista, RF2 and a couple others, I strictly use ACC GT3. When I built my system 2.5yrs ago, I also bought an Ultimate and am now using the Heusinkveld Sport pedals. Also mostly select the McLaren. So these settings are Right Up My Alley! Since I'm retired, I appreciate the update on your settings, since I need all the help I can get. Best to you in ALL your racing endeavors. :)
Extremely useful video to suit everyone James. We don't have the kit you do, but we'll definitely share it with our community! And... If you ever need a livery.. we are here for you anytime. Always been a fan.
James, this is by far the best video that I have seen for my personal performance. Just one thing out of the whole video had made a major difference for me. Thanks ever so much, I'm such a lazy arse when it comes to setting up hardware. You explain everything so clearly, at a good pace (not fast) and with detail. I can't tell you how much it has helped. 😎🏁💪
Please tell me how to get your resolution to change for triples while using an AMD gpu Max i can go is 2560x1440 but yours says 5760x1080. Please help i've been trying to get triples to work for months now
If you have an AMD card, you'll need to create a custom resolution via eyefinity tool. Check out on your c:\program files\amd\cnext\cnext\eyefinitypro.exe - in the tool create a custom resolution 3x1 layout. Then select the new resolution in your Windows display settings 7680x1440 and this will then show up in ACC as in game resolution.
@@danieldulberg2167 I wish i could thumbs up this 1000 times man! I knew amd had an eyefinity tool that could do that but no clue why it's hidden. You are amazing man and i highly appreciate your help!
@@conwaycritty8019 you're more than welcome, I had the same issue about half a year ago and was struggling to find the eyefinty tool myself. Have fun with your new experience 😉
I’m struggling with feel on the dd pro wheel, the feedback is there but still feels vague. I run the road effect at 0 and gain 70-90 depending on car , any advice?
Try ffb on the wheel at 100, linear force, damping on base to 35, nfr to 3, interpolation to 3, in game dynamic damping to 100 and ffb to where you like it [mines around 70]. In game move all sliders for ffb to the far and back - theres some bug in acc and sometimes right values never kick in if the sliders arent moved. Set the wheel soft lock to what the car originally has both in acc and on base.
Wouldnt it be more logical to have a 100% fbb in game [this way the signal is uncompressed] and then let the wheel limit its output [lets say 50% on wheel]?
It's best the other way around, letting your base fully stretch it's legs in terms of power but then controlling it finely through the game as you can adjust it a lot more finely.
No, totally the opposite. What you want from a wheel is dynamic range. The game signal is digital, which means that it's only a mathematical thing that the base will translate into power. Imagine an amplifier with a CD player connected to it, if you put too much gain on the CD player, you will listen the sound distorted even if you put only 10% of volume on the amplifier. Now if you put 10% of volume on the CD player and the amplifier to the maximum, it will not create distortion because the source signal is not high enough for the total amount of power available on the amplifier to make distortion on the speakers. The same principle applies with the game and base. You want a clean signal on your hands, not one with clipping.
@@hernanialves6938 Thank you for replying. Using your CD paralel - if the signal from CD is low and I amplify it to the max, I normally get distortions [white noise] because the amplifier will try to amplify a weak signal, so it will be amplifying noise too. But thats analog. Is it any different with digital? I honestly dont know, but even digital speakers have some buzz when nothing is being played on them. Second question: Can the source signal be clipping? I thought you get clipping when the hardware gets signal it cant process within its range, so it just represents anything above its max as its max.
![ได้เวลา! พาน้องแฝดฉีดวัคซีนครบ 1 เดือน🫣 [cc] แดนแพทตี้ SS2 | EP.52 |](http://i.ytimg.com/vi/IzeLtaXBLNE/mqdefault.jpg)
Useful info for any Honda drivers, there was an update few patches ago to the car, steering rotation for it is at 436 now 👍:D
Thanks Maciej. Also I wonder what car James crashed into at PR coming out of the pits😅
Thanks mate... I have completely no feeling in the Honda, so I'll try that out! Where do you find that kind of info, if I may ask?
What to do with that information? I'm a honda driver but i dont understand your message, unfortunately 😅
@@mku4 It basically means you have to set the steering lock to 436 degrees both ingame and in your wheel's software to get the optimal feel. When it's set correctly, the wheel moves 1:1 with what you do, and it also gives you a hard stop (it's called bumpstop) when you turn the wheel all the way.
Where to find updated information about steering locks?
I tried your view settings but it looks nothing like the way it looks in the vid maybe I’m missing something ?
I have the same problem it just looks rlly zoomed out and it’s weird that his fov slider is greyed out
Hi james
Loving the content.
Just bought a sc2 pro. Now im after some.settimgs. seen some of your videos but they are old. As in, there's been loads of updates to simucube software and most sim titles since your video.
Could you do a video list all sc and in game settings for rf2, am2, rennsport, acc, iracing, f1, ac, leman unlimited. Sorry for the big list. Loads of sims out there and I have most of them 😂😂
Many thanks
Little tip for all your lot. If you ever ask a big TH-cam channel a question sometimes when you click reply YTube will auto fill their channel name but not always. So when you ask your question do it like this
@channel name your question
Otherwise the content creator will not see your question unless they look through all their comment which isn't possible when they have 100s or 1000s of comments.
Yeah I don’t understand why the esporters set the rotation for each car when acc does it automatically on PC??
Amazing video as usual! Just here to say that you no longer need to have the steering lock set specifically for every car. As long as it’s the same on your wheel and in game and larger or equal than the car’s steering lock, you’ll be fine. This has been confirmed on multiple occasions by Kunos (by Aris, on forums, etc). Just set to 900 or 1080 and you can forget about it. If you then need to fine-tune the steering sensitivity, yous should use the steering lock setting in the mechanical grip section of the car’s setup.
You still need the correct lock to simulate steering hard lock. ACC doesn't do that natively.
@@FEVB What does steer lock have to do with bumpstops?
@@CooterBrownRossi sorry I meant steering lock
Okay but this is the single most helpful video I’ve watched for improving my pace. And it’s not even from the camera settings. It’s from the steering angle. I thought every car used 900 so here I am on the Ferrari with essentially double the angle wondering why I was struggling so much on slow windy circuits.
I’ve managed to get my nurburg time from a 2:01.5 to 1:58.1 in literally 5 laps.
Thank you so much!
What steering wheel do u use if I may ask?
Cheers for the setting James. Do your settings change much between when you're racing eSports and training for the real life GT3 cars?
Hey James awesome video, lots to try out now.. I thought the wheel rotation for PC users was automatically adjusted so the the in-game car rotation matches the sim wheel rate?? Has this changed recently I noticed Jardier and others do the same as u now, set it different for each car now??
Thanks for the great content mate. Do you wana sell me your thrustmaster open wheel addon...I cant find it anywhere in South Africa 🤪
helo Bald. how to make G29 feel as Sim Cube? sorry I not speak London. regards
Lol, nice one 😂
How can driving force GT feel like g29? Tanks
Great video James. The contribution you make towards sim racing and ACC is really valuable
Hi James. From the point of view of a real driver I would like to ask you... the damper at zero causes a kind of very intense spring effect towards the center, with no rubber feeling on the track. Is this realistic? Is it like this in a real GT3? Thanks for the content.
what about if i have 4070rtx and 5800x ryzen 3D .its better go low settings like in csgo for smothes play,??? or i can play 5k with ultravide 34LCD 165hz? thx for answer
Can someone let me know the answer around the steering. Can I just find put my wheel at 900 in software and in game and be good? Or do I need to set it per car? I am on PC. Thanks
Good Luck in the Motorsport Games E Sports. You can do this!
😁
I don’t even know what this did but I thought my force feedback was broken and know it’s not
do you have an update for the single ultra wide?
"Pitch" in camera settings is an interesting one. In iRacing, it instructs you to use that setting to put the horizon at eye level. Which typically means your pitch would be a positive number. YMMV
Why he can’t change the FOV?
Triple screen
Really wish i could sit in a rig pf someone high level to know how mine should feel
Can i use Simucube software with any steering wheel ?
Only a esporter can translate a esport setup to a fast time. As rookie I can have simple setup or pro setup and still I have same timesheets...
As long as you're having fun ;)
Maybe someone can help me with this strange issue:
Playing ACC on PS4 Pro, go out on track, cockpit view, pause de game -> there's NO "view settings" menu!!
I cant view/change FOV or any graphics settings...
Someone with the same problem???
31.4 Nm? D:
Hi, I noticed at the bottom of your wheel base setting ( 1st Bit of your video ) you had, Simucube 2 Ultimate and early access Filters. Is that just something for the ultimate wheel base, as I have the simucube 2 pro and I dont have that setting on my setup. If I should have it, could you tell me in old person's way, ( I'm 70 yrs old ) how to set it up, as I am having alot of problem with my steering wheel and pedals. Thanks Steve P, NZL.
He clearly has no idea about PC gaming "I get 120fps too 160fps which isn't bad but not the best" if your getting 120 to 160fps in this title on a 3070 your doing extremely well
10:19 When you see a the graphical wheel lagging behind, the input lag must be 20 ms at least and could be twice. I never had that with my 49" Samsungs using the 3rd by now apart from a little in DR2, but I saw it often enough on TH-cam and not once I saw a triple-screen setup in sync. I even saw this lag in a SRG-video once (usually he doesn't show the graphical wheel) and even in iRacing. I never had a tiple-setup also for that reason, so it's just an impression. Almost all people deactivate the graphical wheel probably for that reason, because when the wheel is in perfect sync, it doesn't annoy and getting covered perfectly by the factual wheel anyway.
Have you got settings for Fanatec GT DD Pro base 8Nm and McLaren GT3 V2 wheel by any chance? I’m using PS5
Thanks for that, All of a sudden I as down to 24fps and game was unplayable. Seems a setting I couldn't find was really messing with the card and I got it back to 80fps. Found this, tried it and now I get 240fps. This is on a 3060ti.
Hello James, I have had the dd pro setup for acc. I have tried every combination of settings but I get extreme oscillation. I need help its killing me.
Many thanks for this, James. New to ACC - I have a SC2 Pro and to be honest I’m clueless how to set it up! This’ll help loads 👊
Hey guys , eventhough i did set the correct rotation setting for the mclaren 720s in both driver and game , the wheel in game doesnt match my wheel , help pls
I also have the same resolution and video card as you. Thank you. I have all the visible cars. It's too dangerous for me
Can u update your folder settings with race day and night, I saw in your race in kyalami and u change this , cheers and thanks mate
I thought the wheel rotation and steering lock will automatic change from different car.
So you need to do this manuel depending on what car you are driving
Hi James, is it true you woke my dad up at 3:30 in the morning to ask for beers?
God ACC looks good on PC..
My povo XBOX one struggles hard with sim stuff 🙁
Guys on the wheel assignment buttons which buttons is the D-pad please?
120-160fps in ACC is really good lol
@F AD when he said that I was like wtf is he on about. Clearly doesn't realise 120 to 160fps on ACC is insanely good and on a 3070. I have a 3080 and 9700k and I don't get anywhere near that
What spring did you remove on the HE+ brake pedal?
hi, i have a thrustmaster t300 wheel,can you help with a good setup for both profiler and in game settings?
Legendary video. Thanks a lot !
Super usefull. It could be lovely if You share your AC settings in same way.
Cheers :)
Hi James, thanks for the video guide. I've looked to replicate your settings onto my SC2 Pro, but still experience some quite violent wheel oscillation on straights which is amplified if I remove 1 hand and more so if I remove both. Any ideas/tips on how I can remove this through settings changes? Appreciate any tips.
Guauuu buenísimo perfíl para mi simucube 2 pro, me siento muy muy bien así. Me preguntaba si tienes perfíl para assetto corsa, sería genial que lo compartas.....
awesome video, im more of an iracing guy, but i do dabble with ACC from time to time, gonna apply some of the settings for sure, not longed coped some heuskinveld sprints, and ive pretty much got the same as you already apart from, im at 38 on the break witch feels about as good as it needs to be. good luck over the weekend 🦾
Hey mate. Thanks for this. My fov and feel of the car is now much better.... thanks
Any tips for the logitech g29?
Doesn't 1080 degrees cater to all cars?
different cars have different degrees. rally cars typically have 540, GT3 around 380-540
@@victorxdavidyou use?
Is the McLaren still a competitive car in ACC?
Mate your settings are amazing For me its a game changer
Greetings from Poland
Thanks James! Although I have Automobilista, RF2 and a couple others, I strictly use ACC GT3. When I built my system 2.5yrs ago, I also bought an Ultimate and am now using the Heusinkveld Sport pedals. Also mostly select the McLaren. So these settings are Right Up My Alley! Since I'm retired, I appreciate the update on your settings, since I need all the help I can get. Best to you in ALL your racing endeavors. :)
Extremely useful video to suit everyone James. We don't have the kit you do, but we'll definitely share it with our community!
And... If you ever need a livery.. we are here for you anytime. Always been a fan.
James MCLaren setup for Zolder please
Will you be getting a 40 series GPU?
Do you ever race in VR? If not, why?
Put saturation on 90% it's alot more realistic !!
Hi James
Thanks for showing your settings, hope you don't mind me asking but do you use all 3 soft rubbers in your ultimate brake pedal ?
Any help with the thrustmaster tx servo and t-lcm pedals
Thanks for sharing and incl. the settings files! Will compare them to my settings tonight!
James, this is by far the best video that I have seen for my personal performance. Just one thing out of the whole video had made a major difference for me. Thanks ever so much, I'm such a lazy arse when it comes to setting up hardware. You explain everything so clearly, at a good pace (not fast) and with detail. I can't tell you how much it has helped. 😎🏁💪
foton
Thanks James for this sharing
Thank you for sharing😘👍🇨🇦
WELL THATS AN BIG STATEMENT IN THE TITLE 😂😂
what about the car settings?
Please tell me how to get your resolution to change for triples while using an AMD gpu Max i can go is 2560x1440 but yours says 5760x1080. Please help i've been trying to get triples to work for months now
If you have an AMD card, you'll need to create a custom resolution via eyefinity tool. Check out on your c:\program files\amd\cnext\cnext\eyefinitypro.exe - in the tool create a custom resolution 3x1 layout. Then select the new resolution in your Windows display settings 7680x1440 and this will then show up in ACC as in game resolution.
@@danieldulberg2167 I wish i could thumbs up this 1000 times man! I knew amd had an eyefinity tool that could do that but no clue why it's hidden. You are amazing man and i highly appreciate your help!
@@conwaycritty8019 you're more than welcome, I had the same issue about half a year ago and was struggling to find the eyefinty tool myself. Have fun with your new experience 😉
Do you often drive in VR?
Thanks for the video!
Any tips for belt driven bases?
Yes, get a DD
Thank you 🙏
I’m struggling with feel on the dd pro wheel, the feedback is there but still feels vague. I run the road effect at 0 and gain 70-90 depending on car , any advice?
Reset everything to stock, dont touch anything and bring ffb to 50-60%
@@FRFM00 Vagueness can also come from too high damper settings. Try reducing this in-game.
@@fad2679 thank you . I’ve tried this but still feels like I’m not getting the feedback I should , I can’t feel the car loose grip
@@FRFM00 ignore this advise
@@Mr.Reddit.R.Athiesm why? A bunch of pros have damper at 0% to increase detail and crispness of the ffb.
Thx mate, finally know how to move things in the hud
cool video, I learnt alot. thanks mate 👍
settings you would recommend for DD1 users?
Ff
to get something else
Try ffb on the wheel at 100, linear force, damping on base to 35, nfr to 3, interpolation to 3, in game dynamic damping to 100 and ffb to where you like it [mines around 70]. In game move all sliders for ffb to the far and back - theres some bug in acc and sometimes right values never kick in if the sliders arent moved. Set the wheel soft lock to what the car originally has both in acc and on base.
Wouldnt it be more logical to have a 100% fbb in game [this way the signal is uncompressed] and then let the wheel limit its output [lets say 50% on wheel]?
It's best the other way around, letting your base fully stretch it's legs in terms of power but then controlling it finely through the game as you can adjust it a lot more finely.
No, totally the opposite. What you want from a wheel is dynamic range.
The game signal is digital, which means that it's only a mathematical thing that the base will translate into power.
Imagine an amplifier with a CD player connected to it, if you put too much gain on the CD player, you will listen the sound distorted even if you put only 10% of volume on the amplifier.
Now if you put 10% of volume on the CD player and the amplifier to the maximum, it will not create distortion because the source signal is not high enough for the total amount of power available on the amplifier to make distortion on the speakers.
The same principle applies with the game and base. You want a clean signal on your hands, not one with clipping.
@@hernanialves6938 Thank you for replying. Using your CD paralel - if the signal from CD is low and I amplify it to the max, I normally get distortions [white noise] because the amplifier will try to amplify a weak signal, so it will be amplifying noise too. But thats analog. Is it any different with digital? I honestly dont know, but even digital speakers have some buzz when nothing is being played on them.
Second question: Can the source signal be clipping? I thought you get clipping when the hardware gets signal it cant process within its range, so it just represents anything above its max as its max.
@@Sloshy But is the base not generating any noise itself when on full power?
@@hernanialves6938 Ah okay! Thank you for educating me!
Oh how I will rue the day when people get bored of this pathetic GT3 class.