Genius idea for illustrating exactly how to route the belt when a video of doing it on the actual pulleys is virtually impossible to take. Well done!!!
Sir, you are the most amazing person. You are about to save me money having replace the belt with a mechanic. I will follow your tutorial and see if i can do it myself. Thanks very much for sharing your video...
Thank you so much for your support by watching my video! Good luck on your project and hope you finish it without any problem. Again thank you and keep safe always!
Thank you very much for this video I really appreciate this and just let you know your transmission oil change video was so much awesome and so much information I did it myself and I'm so proud thank you😊❤
Thank you so much Lolo Groovy DIY! I will try it out and thank you for that great idea in routing that in those pulleys! God bless you po! More power to you Lolo Groovy!
You had the tensioner correct, on a 2014 their is a 17mm nut for attaching wrench to.Just below the tensioner pulley, Easier to get to with right front wheel off,
thanks for the detailed work, would you mind sharing the part number for the belt, i bought 2 and both were short even when it says it will work for my 2012 outlander
I bought the belt in a local auto supply store and I don't have the parts number. If you want to make sure of the size, the best option is to get the parts from the dealership, might cost you a little more but it's your best shot. Thank you for your support and have a wonderful day ahead.
Just found your videos after having hear a noise from my 2008 lancer. Could you explain on what a whirring noise could be when accelerating after sitting 8hrs in the heat?
Thank you for giving time to watch my video. Whirring sound can come from any moving parts of the vehicle. It might be a wheel bearing, a pulley bearing or an axle just to name a few. Have a mechanic check it out. Hope it's not a big problem and thanks again!
Does is method also apply to the replacement of a 2016 Mitsubishi lancer? Just yesterday a squeaky noise was occurring under the hood when the car is accelerating. I was told it might be the belt.
It should be the same routing. But just to be sure, compare the number of pulleys and position of the serpentine belt of your engine with the diagram I have on my video! Thank you for watching and have a wonderful weekend.
For some reason I feel like your not speaking about the difficulty of getting the belt on the pulleys, you only showed a diagram not the actual process of putting the belt on the actual vehicle
Your feeling is correct. I'm showing the easy way to route and grab the belt so it can be placed in all the pulleys without difficulty. Thank you for watching.
I just bought one of these vehicles (same year) about 3 months ago. What's your impression of vehicle? Is the transmission a little weird to you too? Sluggish going up hills, sounds like it decelerates when slowing down etc. Maybe that's all cvts ?
I don't feel any sluggish or any weird thing with the car. CVT is a quite transmission which you don't even feel when its shipting. I don't want to scare you, but have your transmission inspected and check if the fluid is good. Thank you for watching! Hope everything is well.
I didn't replace the tensioner because it is still in good condition but if ever I do it, I'll get the parts from the dealer. Thank you for watching and have a wonderful day ahead.
A MAF sensor measures how much air is aspired by the engine and the MAP sensor measures the air pressure in the intake manifold. Thank you for watching.
@@lologroovydiyand which sensor measures the intake temperature? on the first cold start at temperatures above 20 degrees celsius the idle is at 1500 rpm (correct procedure). But at when the temperature is below 20 degrees celsius, the idle is at 1200 rpm. I've already replaced the MAF sensor and it didn't fix it. I suspect the MAP Sensor.
Magandang araw AK NAYAB. Hindi ko alam kung anong dahilan kasi yung tensioner pulley ay para hindi lang dudulas ang belt. Baka kaya nanibago lang yung starter. Obserbahan mo lang muna at baka bumalik din sa dati. Thank you for watching and have a good day ahead!
I already get rid of the package and I don't have the specs. Give the model and year of your car and the auto supply store will look it up for you. Thanks for watching and have a good day ahead.
@@lologroovydiy ung serpentine belt namn na na sesearch ko forsale sa fb or shopee nasa 1600-2k. so posible mas mahal tlga ung genuine? kaya nag tataka ako sa 6800 eh ehe
I went to a mechanic and my guy said he need to brake a part the engine blah blah blah and this video shows me Just the coolant 🪣 . Loose the tensioner…. . Follow the 5 year old picture idea 😀 . And bang lopks easy and simple
![[TH] VALORANT Champions Seoul - Grand Final - EDG vs TH](http://i.ytimg.com/vi/WvObMc9VelI/mqdefault.jpg)
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.4 (4/4)](http://i.ytimg.com/vi/d3l5rxl5CVo/mqdefault.jpg)
Genius idea for illustrating exactly how to route the belt when a video of doing it on the actual pulleys is virtually impossible to take. Well done!!!
Thank you so much... your words really meant a lot!
Yeah, that was awesome!
I’ll let you know how it goes with our 2014.
It looks pretty doable, the electrical tape diagram was great!!!
Literally got me out of a problem in middle of a snowstorm. Thanks for so many details.
Nice to hear that! Thanks.
Thanks for the excellent tips, really helping me to get the job done
@@zaidizack7077 you're welcome and thank you so much for your support. Have a wonderful day ahead.
Your video saved me a trip to the mechanic! I really appreciate people like you who post informative stuff on YT. Thank you!
Every time I open my phone and see messages like this... it really made my day beautiful! Thank you for watching and have a wonderful day ahead.
Sir, you are the most amazing person. You are about to save me money having replace the belt with a mechanic. I will follow your tutorial and see if i can do it myself. Thanks very much for sharing your video...
Thank you so much for your support by watching my video! Good luck on your project and hope you finish it without any problem. Again thank you and keep safe always!
Great vid!
We used a coat hanger.
Thank you for this excellent explanation!!!
The coat hanger will work perfectly well! Thank you so much for watching and have a wonderful week ahead!
Well done. This is how you make a video.
Thank you for watching and have a wonderful day ahead.
Bravoooo
The most amazing illustration I ever watched 🎉
Thank you for watching!
Thank you for sharing your informative video, now we know how to change the belt, stay safe and have a wonderful weekend.
Thanks for watching and always keep safe. God bless!
That diagram with the tape and stringe was so helpful I can't thank you enough
Thank you for liking the idea and have a wonderful day ahead !
thank you so much , helped me doing this job. greetings from Mexico !
Glad to hear that and thank you for watching the video. Have a wonderful day ahead!
Wow, now that's how you teach. Thank you!
Thank you so much for watching!
Thank you, very helpful!!
You are welcome... thank you for watching!
Thanks for this amazing video and the special tool..it's very helpful and simple technique.
Thank you for spending time watching!
Very well done man! Thanks 😊
Thank you for watching and have a good day ahead!
Thank you very much this video was fantastic
Thank you so much for watching. Have a wonderful day ahead.
Good job Sir... All rounder talaga kayo Sir..yong iba takbo na sa mekaniko mga ganyang klaseng trabaho
Maraming salamat ulit sa suporta AK NAYAB! God bless!
THANK YOU!
You're welcome and thank you for watching too!
Thank you very much for this video I really appreciate this and just let you know your transmission oil change video was so much awesome and so much information I did it myself and I'm so proud thank you😊❤
Nice to hear that my friend. Thank you for watching and have a wonderful weekend!
Great video and thanks for taking the time to create it.👍
Thank you for watching my friend!
Great video👍
Thanks!
Thank you so much Lolo Groovy DIY! I will try it out and thank you for that great idea in routing that in those pulleys! God bless you po! More power to you Lolo Groovy!
Thank you for your kind words AK NAYAB! Enjoy working with your car and keep safe always. God bless!
You had the tensioner correct, on a 2014 their is a 17mm nut for attaching wrench to.Just below the tensioner pulley, Easier to get to with right front wheel off,
Thanks for the additional information. Thanks for watching and have a wonderful day ahead.
Thanks. Got it done in the garage thanks to your walkthrough. ⭐️⭐️⭐️⭐️⭐️
Nice to hear that it went okay. Thank you so much for watching and have a wonderful day ahead.
Thank you for taking the time to share!!
Thank you for watching and keep safe always!
Great explanation, thank you very much!
Thank you for watching and have a wonderful day ahead!
The best video! 👍🏽
Thank you so much for watching. Have a wonderful day ahead!
Your saint I can't thank you enough
Thank you so much for spending time watching. Have a good weekend!
detalyado ang pagpapaliwanag ,salamat po malaking tulong sa mga di marunong gumawa.full watched not skipping of ads.
Maraming salamat sa laging pagbisita AK NAYAB! Keep safe always and God bless!
thanks for the detailed work, would you mind sharing the part number for the belt, i bought 2 and both were short even when it says it will work for my 2012 outlander
I bought the belt in a local auto supply store and I don't have the parts number. If you want to make sure of the size, the best option is to get the parts from the dealership, might cost you a little more but it's your best shot. Thank you for your support and have a wonderful day ahead.
Thank you for sharing this very informative video.
Salamat sa pagbisita AK NAYAB! God bless!
You! My friend are awesome!
Thank you so much for watching! Have a wonderful day ahead.
Thanks for the video.
You're welcome and thank you so much for watching. Have a Prosperous New Year!
Nice mechanic pro
Thanks!
@@lologroovydiy salamat mr
1st still watching..
Great vid, thank you
Thank you for watching and have a wonderful day ahead!
If you have access to a hoist this jobs is alot easier from underneath the car
Saved my life
Thank you for watching!
If you double wrench, you'd have a longer handle to grab onto and more leverage.
That is also a good idea and will consider doing next time. Thank you for watching and have a great weekend.
Great video. This is big help. What brand/model no. of the serpentine belt in your video?
I think my son bought the belt from the dealer. Thank you for watching AK NAYAB and God bless!
Just found your videos after having hear a noise from my 2008 lancer. Could you explain on what a whirring noise could be when accelerating after sitting 8hrs in the heat?
Thank you for giving time to watch my video. Whirring sound can come from any moving parts of the vehicle. It might be a wheel bearing, a pulley bearing or an axle just to name a few. Have a mechanic check it out. Hope it's not a big problem and thanks again!
Does is method also apply to the replacement of a 2016 Mitsubishi lancer? Just yesterday a squeaky noise was occurring under the hood when the car is accelerating. I was told it might be the belt.
It should be the same routing. But just to be sure, compare the number of pulleys and position of the serpentine belt of your engine with the diagram I have on my video! Thank you for watching and have a wonderful weekend.
For some reason I feel like your not speaking about the difficulty of getting the belt on the pulleys, you only showed a diagram not the actual process of putting the belt on the actual vehicle
Your feeling is correct. I'm showing the easy way to route and grab the belt so it can be placed in all the pulleys without difficulty. Thank you for watching.
I just bought one of these vehicles (same year) about 3 months ago.
What's your impression of vehicle?
Is the transmission a little weird to you too?
Sluggish going up hills, sounds like it decelerates when slowing down etc.
Maybe that's all cvts ?
I don't feel any sluggish or any weird thing with the car. CVT is a quite transmission which you don't even feel when its shipting. I don't want to scare you, but have your transmission inspected and check if the fluid is good. Thank you for watching! Hope everything is well.
@@lologroovydiy thank you, I will get it inspected 🙂
That easy, huh? Cool.
Hi! What is the brand of the automatic tensioner?
I didn't replace the tensioner because it is still in good condition but if ever I do it, I'll get the parts from the dealer. Thank you for watching and have a wonderful day ahead.
This looks the same as 2018 Mitsubishi Outlander 2.4 was a real pain in the cun$t slipping the belt on
They make it harder and harder for the owners to do it themself. Thank you for watching and have a good day ahead.
Salamat po sa pag share
Maraming salamat AK NAYAB! God bless!
good day sir. sir can i ask what is the size of your belt? thank you
Thank you so much for watching AK NAYAB.
Could you tell me which sensor measures the temperature? the MAF or MAP?
A MAF sensor measures how much air is aspired by the engine and the MAP sensor measures the air pressure in the intake manifold. Thank you for watching.
@@lologroovydiyand which sensor measures the intake temperature?
on the first cold start at temperatures above 20 degrees celsius the idle is at 1500 rpm (correct procedure). But at when the temperature is below 20 degrees celsius, the idle is at 1200 rpm. I've already replaced the MAF sensor and it didn't fix it. I suspect the MAP Sensor.
Does these have timing marks?
The serpentine belt doesn't have timing marks and can be removed in any cylinder position. Thank you for watching and have a great day ahead.
Thanks lolo
Maraming salamat AK NAYAB! God bless!
Tamang tamabyan Lo sa mga may sasakyan
Salamat ulit AK NAYAB sa pagbisita. God bless!
Hello sir ask ko lng nagpapalit ako ng tensioner pulley then pag start ko parang may delay na pag start ng makina ano po kaya dahilan salamat po
Magandang araw AK NAYAB. Hindi ko alam kung anong dahilan kasi yung tensioner pulley ay para hindi lang dudulas ang belt. Baka kaya nanibago lang yung starter. Obserbahan mo lang muna at baka bumalik din sa dati. Thank you for watching and have a good day ahead!
Which motor is this? 2.0 or 2.4
It's a 2.4L engine. Thank you for watching.
@@lologroovydiy does the 2015 lancer share the same 2.4L as the 2013 SE???
Saan po kayo nakabili ng continental serpentine belt ?
Sa dealer ako bumili pero meron din sa mga auto supply. Maraming salamat sa suporta AK NAYAB. Godbless!
What belt did you use?
I got the serpentine belt from the dealer. Thank you for watching!
I got the AC Delco from Rock Auto.
I’m not a mechanic. lol
@@CTSpeed413 did the belt fit ? I have a 2015 lancer gt 2.4 so I can buy it
can i know saiz belting?
I already get rid of the package and I don't have the specs. Give the model and year of your car and the auto supply store will look it up for you. Thanks for watching and have a good day ahead.
Saan shop nyololo?
Maraming salamat sa pag nood! Wala ako noon at pang DIY video lang ang aking ginagawa. Keep safe always AK NAYAB at God bless!
@@lologroovydiy May FB ka lolo? add kita para makapag ask ng question minsan sa chat
magkano presyuhan ng belt for lancer GTA? ung napagtanungan ko 6800 daw with install. Mitsu Blet ung sakania ganun ab tlga presyo?
@@jascynmanianglung8144 dito sa america tingin ko nasa tama yang presyo kasi dito around $150-200
@@lologroovydiy ung serpentine belt namn na na sesearch ko forsale sa fb or shopee nasa 1600-2k. so posible mas mahal tlga ung genuine? kaya nag tataka ako sa 6800 eh ehe
I went to a mechanic and my guy said he need to brake a part the engine blah blah blah and this video shows me Just the coolant 🪣 . Loose the tensioner…. . Follow the 5 year old picture idea 😀 . And bang lopks easy and simple
Thank you for watching! Have a good day ahead.
Great video👍
Thank you for watching!