Why am i now seeing your channel. Watching you makes me not want no one to touch my 🏍️. Awesome job on the rear caliper Sheessse. This whole build was awesome to watch. I’m actually rewinding back to 45:39 to continue from there. And i now follow you.
Hey thanks! Yea I normally just to segmented videos documenting the journey of the build but I decided to just put it all together to show the whole process lol thanks again it’s always good to here that the videos I make are actually helping others in their builds. Thanks for the sub and comment it also really helps my channel and videos get found.
I think I have liked this video multiple times I just found a 2005 gsxr 600 and it’s really bad, needing multiple parts and bolts/screws, you sir are amazing! This video deserves a lot more views, I hope you continue to post and do more rebuilds and continue to treat these bikes like gold, I know that bike is so happy you got a hold of it it needed almost a full recovery, and you got it just right 🔥🔥
Wow thanks! And the 05 models a good one too you have a little more room to work on things inside the frame and part are a little easier to get. Remember all it needs to run is clean fuel, fresh air and a happy spark and the rest is just topping on the cake lol stay tuned just got a s1000rr to rebuild and will have the first videos of that up soon!
@@jaelinsmith3421 I like motorsport the best (typically cheaper) but partzilla is also a good site. But also also just find the part number and enter the part number into Google and sometimes you’ll find random sites that aren’t scams but have the best price that is much lower than the other two. That quantum fuel pump is really great because it comes with all the types of fittings and connectors you would need no matter the fuel pump so I’m sure it would fit and I had no issues. Just make sure to replace the pick up screen. You should make your own build video to help out any other guys wanting to rebuild their K5’s.
@@mendingmotoseveryone says partzilla, so I will use that site but I will try motosport as well, and I’m thinking of trying the quantum fuel pump as I seen many people use it. I would make a TH-cam video dedicated to rebuilding K5 but I am not nearly as confident to do it on camera first try.
Since I have watched videos regarding Suzuki GSX'R the algorithm took me here... Am old school and am wondering nowadays which gsxr with better technology, with a gas gauge...lol and better mechanicals would be worth to get? Doing some research, from 2017 on, has better equipment but now which years are good years that's dependable and easy to work on. The color combination are beautiful from the older models...dope! By watching this build it takes a lot of knowledge of every screw and much patience. Love the thumbnail 👌 Happy rebuilding and have fun with each project. Much blessings 🙌 Safe riding. Thank you 🏍🏍🏍😎😎😎💪💪💪
Hey thanks glad you were brought to the channel! And I honestly think if your doing a 600 or 750 the 2011 onward have not really change at all but for the 1000 yea I would got with the newer model but again Suzuki hasn’t changed anything really other than a few tweaks to the electronic. Since it is a gsxr parts will be plentiful and not a big worry and more often than not the issue you run into are minor such as a spark plug went bad or a rectifier went out, nothing major like on European bike where most of the Faults can lead to catastrophic failure lol bmw *cough *cough. ** lol but yea the 2011+ for 600&750 and 2017+ for 1000 and your golden just find a good condition used one and do the maintenance your self to get to know the bike more. And yes some jobs are tedious but it is fun and worth it in the end.
I'm missing a lot of hardware for my rebuild. Where do you get all of the nuts and bolts for your fairings? I pretty much had my bike sitting in the elements for a few years. Going to need to replace a lot of stuff including stuff after the wreck (wiring harness shorted, left side damage to clutch, handlebar, and front HUD is absolutely destroyed with a lot of electrical components XD).
You can find bolt kits online that have all the thread clips and bolts you need just be aware some are made of really light aluminum so they snap easy. If you want quality go with the company probolt.all the hard parts can be found for cheap used or Chinese part (not that bad) also remember to dump the old gas clean your injectors, swap old fuel lines especially the one connecting the top injectors fuel rail to the bottom one. Also prob need a fuel pump kit. Then some new spark plugs, oil, and coolant and you’re golden. Good luck with the build !!
Yes, these Fairings are from China. They’re from a company called Monster Fairings but the actual producer of the Fairings is a company called ZXMT and it seems like they are the main provider of all the Fairings companies but there are some Chinese brands out there on eBay that are pretty shitty but the ones that come from ZXNT seem to fit pretty well and the paint jobs that Monster Fairings does if you custom order them are really good!
I have a problem with this exact bike model, the front brakes are juddering my bike back and forth when braking and makes a train horn noise when coming to a stop. I just bought new rotors so no way they are bent. Any guidance would be greatly appreciated.
I would start with pulling out your brake pads and cleaning your brake caliper pistons with some soapy water. Typically, when you buy new rotors, you’ll buy new brake pads and “bed them in“ but it also could be air in your brake lines Where one caliper isn’t clamping enough, and just barely which is making the jutter
Hey yea the header (exhaust manifold) they are the M4 GP exhaust it’s a full system (exhaust manifold and exhaust pipe) the model that on this bike they don’t make anymore, it had a small silencer on but the updated it and removed it.
I totally agree! I was thinking the same thing as I was trying to fit rags in super tight spaces lol "why did I do this to myself" lol thanks for watching and leaving a comment it helps the video get found. Cheers!
Wo…I had no idea that small of a tolerance mattered! Thanks for the heads up I’ll keep that in mind for the next set of wheels that need an overhaul. Cheers!
The best place that I’ve always found deals is Facebook marketplace places like cycle traders and other online dealers. You never really get a good deal there. It’s always in person interactions and finding motivated sellers.
Yeah I noticed that too, but I wanted to get out riding and didn't have the money for a new set just then. But for some of the upcoming builds I'll def replace anything that's not right. Thanks for the heads up! Cheers
Yeah I noticed that too, but I wanted to get out riding and didn't have the money for a new set just then. But for some of the upcoming builds I'll def replace anything that's not right. Thanks for the heads up! Cheers
да, я с грустью осознаю это после того, как все колесо было готово, но в будущем я точно не буду этого делать. Я обязательно закрою это и не буду красить.
Yea there are a couple different methods to the paint removal process. You could chem dip, sand down , sand blast or just paint over. Choose to do a wet blast and then paint. And as for the mounting and dismounting the tires it was my first time trying to do it and I didn’t have the right size spoons to get the job done lol
Why am i now seeing your channel. Watching you makes me not want no one to touch my 🏍️. Awesome job on the rear caliper Sheessse. This whole build was awesome to watch. I’m actually rewinding back to 45:39 to continue from there. And i now follow you.
Hey thanks! Yea I normally just to segmented videos documenting the journey of the build but I decided to just put it all together to show the whole process lol thanks again it’s always good to here that the videos I make are actually helping others in their builds. Thanks for the sub and comment it also really helps my channel and videos get found.
Just how i like it, no chit chat, just plodding on one job to the next, great rebuild. 👍
Thanks! I’ll have another build coming up soon 24 s1000rr
This is so underrated glad i came across it. Made my day. Keep it up bud
Wow thanks !! I’ll have a new s1000rr build up soon!
Underrated Chanel you deserve more subs your videos are amazing
Wow thanks! Thanks for the comment it really helps with algorithm lol
I think I have liked this video multiple times I just found a 2005 gsxr 600 and it’s really bad, needing multiple parts and bolts/screws, you sir are amazing! This video deserves a lot more views, I hope you continue to post and do more rebuilds and continue to treat these bikes like gold, I know that bike is so happy you got a hold of it it needed almost a full recovery, and you got it just right 🔥🔥
Wow thanks! And the 05 models a good one too you have a little more room to work on things inside the frame and part are a little easier to get. Remember all it needs to run is clean fuel, fresh air and a happy spark and the rest is just topping on the cake lol stay tuned just got a s1000rr to rebuild and will have the first videos of that up soon!
@@mendingmotos 🤜🏾🤛🏽 i just started ordering replacement parts, where’s a good place to buy oem parts and how did the quantum fuel pump work for you?
@@jaelinsmith3421 I like motorsport the best (typically cheaper) but partzilla is also a good site. But also also just find the part number and enter the part number into Google and sometimes you’ll find random sites that aren’t scams but have the best price that is much lower than the other two. That quantum fuel pump is really great because it comes with all the types of fittings and connectors you would need no matter the fuel pump so I’m sure it would fit and I had no issues. Just make sure to replace the pick up screen. You should make your own build video to help out any other guys wanting to rebuild their K5’s.
@@mendingmotoseveryone says partzilla, so I will use that site but I will try motosport as well, and I’m thinking of trying the quantum fuel pump as I seen many people use it. I would make a TH-cam video dedicated to rebuilding K5 but I am not nearly as confident to do it on camera first try.
one of the best rebuilds
Thanks !! Yea ill have more rebuilds in the future! Thanks for leaving a comment it helps the channel grow!
Sir, you earned a new subscriber.
Thanks! Hopefully you enjoy the other build videos as well!
awesome video dude, really need this tutorial... please make more about gsxr 600 k6/k7
Thanks glad it helped out, it will be a hot minute before I get to the next gsxr though lol
Since I have watched videos regarding Suzuki GSX'R the algorithm took me here...
Am old school and am wondering nowadays which gsxr with better technology, with a gas gauge...lol and better mechanicals would be worth to get?
Doing some research, from 2017 on, has better equipment but now which years are good years that's dependable and easy to work on.
The color combination are beautiful from the older models...dope!
By watching this build it takes a lot of knowledge of every screw and much patience.
Love the thumbnail 👌
Happy rebuilding and have fun with each project.
Much blessings 🙌
Safe riding.
Thank you
🏍🏍🏍😎😎😎💪💪💪
Hey thanks glad you were brought to the channel! And I honestly think if your doing a 600 or 750 the 2011 onward have not really change at all but for the 1000 yea I would got with the newer model but again Suzuki hasn’t changed anything really other than a few tweaks to the electronic. Since it is a gsxr parts will be plentiful and not a big worry and more often than not the issue you run into are minor such as a spark plug went bad or a rectifier went out, nothing major like on European bike where most of the Faults can lead to catastrophic failure lol bmw *cough *cough. ** lol but yea the 2011+ for 600&750 and 2017+ for 1000 and your golden just find a good condition used one and do the maintenance your self to get to know the bike more. And yes some jobs are tedious but it is fun and worth it in the end.
@mendingmotos ty for your honest response.
Really appreciated.
Safe riding brother.
🏍🏍🏍😎😎😎💪💪💪
Just found your Channel & glad i did, good job on the Bike 👍
Thanks!! And thanks for leaving a comment it helps the channel get found faster. I’ll have more full builds in the future.
Liked and subscribed! Also I would have spray painted the frame at the parts that were scratched. Otherwise amazing work
Awesome thanks! Yeah I had plans to just live got in the way lol
Word of advice use lock tight on your fairings fasteners... Or tighten them well and check them often..
Yea I have had a few fall out and have since used a tiny dab lol thanks for the heads up!
I'm missing a lot of hardware for my rebuild. Where do you get all of the nuts and bolts for your fairings? I pretty much had my bike sitting in the elements for a few years. Going to need to replace a lot of stuff including stuff after the wreck (wiring harness shorted, left side damage to clutch, handlebar, and front HUD is absolutely destroyed with a lot of electrical components XD).
You can find bolt kits online that have all the thread clips and bolts you need just be aware some are made of really light aluminum so they snap easy. If you want quality go with the company probolt.all the hard parts can be found for cheap used or Chinese part (not that bad) also remember to dump the old gas clean your injectors, swap old fuel lines especially the one connecting the top injectors fuel rail to the bottom one. Also prob need a fuel pump kit. Then some new spark plugs, oil, and coolant and you’re golden. Good luck with the build !!
Are the farinigs from china?
I was thinking to order a kit for my k7 600
I heard thet they dont fit sometimes
Yes, these Fairings are from China. They’re from a company called Monster Fairings but the actual producer of the Fairings is a company called ZXMT and it seems like they are the main provider of all the Fairings companies but there are some Chinese brands out there on eBay that are pretty shitty but the ones that come from ZXNT seem to fit pretty well and the paint jobs that Monster Fairings does if you custom order them are really good!
I have a problem with this exact bike model, the front brakes are juddering my bike back and forth when braking and makes a train horn noise when coming to a stop. I just bought new rotors so no way they are bent. Any guidance would be greatly appreciated.
I would start with pulling out your brake pads and cleaning your brake caliper pistons with some soapy water. Typically, when you buy new rotors, you’ll buy new brake pads and “bed them in“ but it also could be air in your brake lines Where one caliper isn’t clamping enough, and just barely which is making the jutter
Man say me please, what the model manifold, on this bike? Thanks..
Hey yea it’s a M4 gp exhaust here’s a link to it: m4exhaust.com/product/2005-06-suzuki-gsxr-1000-gp-full-system-black/
@@mendingmotos No no man, not
jar, i say exhaust manifold ?
Hey yea the header (exhaust manifold) they are the M4 GP exhaust it’s a full system (exhaust manifold and exhaust pipe) the model that on this bike they don’t make anymore, it had a small silencer on but the updated it and removed it.
Please clean as you go , far easier than trying to clean behind thing you’ve put back on , I enjoyed watching.👍
I totally agree! I was thinking the same thing as I was trying to fit rags in super tight spaces lol "why did I do this to myself" lol thanks for watching and leaving a comment it helps the video get found. Cheers!
Good job 🇫🇷🇫🇷🇫🇷
Thanks! Will have a new rebuild video soon!
Nice👍
Thanks! And thanks for leaving a comment, it does help the channel!
surface under brake discs shouldn't be painted, this can bend your discs
Wo…I had no idea that small of a tolerance mattered! Thanks for the heads up I’ll keep that in mind for the next set of wheels that need an overhaul. Cheers!
Where can I buy me a a used bike for a fair price
The best place that I’ve always found deals is Facebook marketplace places like cycle traders and other online dealers. You never really get a good deal there. It’s always in person interactions and finding motivated sellers.
@@mendingmotos thank you
velocidad de reproducion x100000
Right on
Cylinder 1 header primary is dented badly. Definitely needs to be addressed.
Yeah I noticed that too, but I wanted to get out riding and didn't have the money for a new set just then. But for some of the upcoming builds I'll def replace anything that's not right. Thanks for the heads up! Cheers
Yeah I noticed that too, but I wanted to get out riding and didn't have the money for a new set just then. But for some of the upcoming builds I'll def replace anything that's not right. Thanks for the heads up! Cheers
👌🏻👍🏻
Thanks! And thanks for the comment it helps the channel grow!
Плоскости прилегания тормозных дисков, красить нельзя! Первое, нормальной затяжки не будет, второе отвод тепла ,третье неравномерность прилегания)
да, я с грустью осознаю это после того, как все колесо было готово, но в будущем я точно не буду этого делать. Я обязательно закрою это и не буду красить.
Help 98 srad start up
What do you need help with? They basically need fuel, air, spark and compression Check those to start with.
not h8ing but dude you fukd them wheels right up
Yea there are a couple different methods to the paint removal process. You could chem dip, sand down , sand blast or just paint over. Choose to do a wet blast and then paint. And as for the mounting and dismounting the tires it was my first time trying to do it and I didn’t have the right size spoons to get the job done lol
Watch in x2.
Yeah it’s a long one lol
👀👍🏼👍🏼👍🏼
Thanks for watching!!👍