If you are installing this to comply with grade 2 you must screw devices to the surface making sure the tampers operate using the provided sticky option is not acceptable
3 ปีที่แล้ว
Hi, about the camera does it detect human or cars,bikes ... only or does it detect also insects, trees moving please ?? Because i hate getting false...
Great video, thnx. I installed 3 axpro systems last month, two of them giving an RF malfunction. The systems works fine, and I didn't see any issues in working. But this RF malfunction stays in the application, also on the panel the malfunction light is on. Do you know anything how to solve this? Or what's the cause of it?
Great video, thank you. Couple of questions, can you disable hub sound notifications all together? As I’m planning to hide the hub and also can you swipe the key fob on the keypad to enable/disable the alarm?
Hi, I’ve watched the whole video. Thanks for making clear a lot of things!! Quick question, my girlfriend and I both have to work different shifts. Is there a way i can set a tag to disarm the alarm for 5 or 10 minutes? Or with a code on the keypad? So i can get in and switch off for 10 minutes and it switches automatically back on? Keep up the good work 👍🏽
I am not an installer or a professional, just an ax pro keen user.. here's my take : I don't see how you can make your usecase work.. You can set in the HikConnect app an automatic arming/disarming schedule but it's based on hours and not on delayed tag reading.. best thing to do in your case : disarm using your tag or keypad and arm it again. it's also better security-wise. (pro-tip : once you have setup your sensors and system, set the first sensors that may get triggered on a delayed trigger - the default is "instant" this way you'll have time to disarm the system before triggering the alarm)
Hi Yes Panic Buttons for the AX Pro are available: netviewcctv.co.uk/ds-pdeb2-eg2-we netviewcctv.co.uk/ds-pdebp2-eg2-we netviewcctv.co.uk/ds-pdb-in-wristband
It's probably too late, even though it's only been 10 months. I didn't find the password from the access point, but I did it as follows: 1. Connected to a wired network. 2. Turned off the access point mode by pressing the "Reset" button on the device. 3. Connected to your home network using a mobile application (or web interface).
@@archieu5326 Hi Archie, thanks for your response. The problem is, if I have new installation let say, no wired network yet, no router or internet either at the moment. How to setup the main panel? I can find it on my phone as an access point but the wifi key is required and I cant find it anywhere. Yes, life is the best teacher, what I'm doing in such a situation is: 1. I have TP-Link extender with LAN port. 2. Activating WiFi HotSpot on my phone. 3. Configuring TP-Link extender to connect to my phone WiFi. 4. Connecting control panel to TP-Link LAN port and that's it, I have it on the cloud and can setup no problem. But the question remains, Why do we need access point functionality on control panel if the wifi key is not provided or at least me I was unable to find it. Tried to Google, TH-cam, Manual, most likely I'm missing something.
@@Ramunas001 Did it! You need to scan the qr code from the device (any scan app) and get something like: [some url] [device SN] [security code] [device model]. Enter [security code] in the application. Enjoy. p.s. Security code usually upper case.
How is the system monitored in a control-room environment? what software is required?
Good morning is there a video about connecting the system to my wifi instead of wired cat 5 cable…thanks
If you are installing this to comply with grade 2 you must screw devices to the surface making sure the tampers operate using the provided sticky option is not acceptable
Hi, about the camera does it detect human or cars,bikes ... only or does it detect also insects, trees moving please ??
Because i hate getting false...
Great video, thnx.
I installed 3 axpro systems last month, two of them giving an RF malfunction. The systems works fine, and I didn't see any issues in working. But this RF malfunction stays in the application, also on the panel the malfunction light is on. Do you know anything how to solve this? Or what's the cause of it?
Thanks
Every time I scan a device it says “no permission”, any advice on how to fix this ?
Is the burglary alarm siren in the video coming from the hub itself or from connected sounders ?
Cannot seem to get the QR reader to work while using the app.
How to connect RF433 device to AXPro?
How can i get notification sound in my hikconnect?
When it's using the cellular connection is it sending text messages or does the sim need a data plan?
Great video, thank you. Couple of questions, can you disable hub sound notifications all together? As I’m planning to hide the hub and also can you swipe the key fob on the keypad to enable/disable the alarm?
I am also interested in the keypad? Does the fob work with the keypad as I would t want the core of the alarm system on display.
Hi,
I’ve watched the whole video. Thanks for making clear a lot of things!!
Quick question, my girlfriend and I both have to work different shifts. Is there a way i can set a tag to disarm the alarm for 5 or 10 minutes? Or with a code on the keypad? So i can get in and switch off for 10 minutes and it switches automatically back on?
Keep up the good work 👍🏽
I am not an installer or a professional, just an ax pro keen user.. here's my take : I don't see how you can make your usecase work.. You can set in the HikConnect app an automatic arming/disarming schedule but it's based on hours and not on delayed tag reading.. best thing to do in your case : disarm using your tag or keypad and arm it again. it's also better security-wise. (pro-tip : once you have setup your sensors and system, set the first sensors that may get triggered on a delayed trigger - the default is "instant" this way you'll have time to disarm the system before triggering the alarm)
What app ??????? There is no hik connect, only some tool for installers !!!
Download Hik-Connect from the Hikvision website
Hello, Does this system come with a panic button. In case of distress when the button is pressed it sends a message to someone for help.
Hi Yes Panic Buttons for the AX Pro are available:
netviewcctv.co.uk/ds-pdeb2-eg2-we
netviewcctv.co.uk/ds-pdebp2-eg2-we
netviewcctv.co.uk/ds-pdb-in-wristband
How loud is this can this be louder the siren
It's loud, but not more than the siren
can i connect it to a smoke detector?
You can use the AX Pro Smoke Detector : netviewcctv.co.uk/catalog/product/view/id/3034/s/ds-pdsmk-s-we/category/422/
Wow
How to connect to WiFi?
It's probably too late, even though it's only been 10 months. I didn't find the password from the access point, but I did it as follows: 1. Connected to a wired network. 2. Turned off the access point mode by pressing the "Reset" button on the device. 3. Connected to your home network using a mobile application (or web interface).
@@archieu5326 Hi Archie, thanks for your response. The problem is, if I have new installation let say, no wired network yet, no router or internet either at the moment. How to setup the main panel? I can find it on my phone as an access point but the wifi key is required and I cant find it anywhere. Yes, life is the best teacher, what I'm doing in such a situation is: 1. I have TP-Link extender with LAN port. 2. Activating WiFi HotSpot on my phone. 3. Configuring TP-Link extender to connect to my phone WiFi. 4. Connecting control panel to TP-Link LAN port and that's it, I have it on the cloud and can setup no problem. But the question remains, Why do we need access point functionality on control panel if the wifi key is not provided or at least me I was unable to find it. Tried to Google, TH-cam, Manual, most likely I'm missing something.
@@Ramunas001 Did it! You need to scan the qr code from the device (any scan app) and get something like: [some url] [device SN] [security code] [device model]. Enter [security code] in the application. Enjoy.
p.s. Security code usually upper case.
The voice is terrible.