Toyota Yaris Key Programming Toyota yaris 2018 key fob Programming manually procedure
ฝัง
- เผยแพร่เมื่อ 16 ต.ค. 2024
- 1. Driver side door open.
2. 2 times key in & out.
3. 2 times door close & open.
4. 1 time key in & out.
5. 2 times key in & out.
6. 3rd time close door.
7. Ignition on & off, now remove the key.
8. Press lock & unlock button for 2 seconds.
9. Press lock button 4/5 time. Remote is done
Toyota Yaris Key Programming Toyota yaris 2018 key fob Programming manually procedure
#pakwheels #xkeys #ashar #ashar
#3a #emirates
Mashallah bahut Achcha hai bhai aur thoda ab video clear dikhaiye Hamare ko
In Sha Allah I will try my best...
Thanks
🙂🙂
Bhai suzuki jimny ka procedure btaen
1. Confirm that the vehicle is in the following condition.
* All doors are closed
* Ignition key is out of ignition switch
* Driver side door is unlocked and its window is open.
2. Disconnect negative (-) cable from battery.
3. After 30 seconds, perform the following procedure within 60 seconds.
a) Connect negative (-) cable to battery
b) Operate drive side door lock button (1) from lock to unlock twice
c) Push 'LOCK' button on transmitter and confirm that all doors cycle from unlock/lock/unlock
d) Push driver side door lock button to 'LOCK' position
e) Push 'LOCK' button on transmitter twice and confirm that all doors cycle from unlock/lock/unlock
With this, code registration is completed.
NOTE:
* Two transmitter codes can be registered at the same time
* When the third transmitter code is registered, the oldest one will be cleared automatically