Bobcat Drive Motor Rebuild T590
ฝัง
- เผยแพร่เมื่อ 27 ก.ย. 2024
- How to reseal a Bobcat new style drive motor. Tips for installing the duo cone or face seal.
Get your drive motor parts here crcomponents.com
/ @crcomponents
www.southvalle...
www.4tetradgro...
Tools We Use:
Hydraulic Cylinder Spanner amzn.to/3SAlHYw
Another Spanner Option amzn.to/3LR1JFb
Hydraulic Seal Clasper www.4tetradgro...
Hydraulic Seal Stretcher www.4tetradgro...
Injector Block Off Cap www.4tetradgro...
Bobcat Fuel Filter Bowl Wrench www.4tetradgro...
Wrench Extender amzn.to/3Yt2yvl
Spring Compressor Tool amzn.to/4fA030n
Hydraulic Seal Installation Kit amzn.to/3Yrs6sV
Hand Impact Tool amzn.to/3Sz0yOk
Common Rail Fuel Injector Test Kit amzn.to/4dasD6T
Injector Leak Back Test Kit amzn.to/46Btf3i
Electrical Supplies:
Milwaukee Solder Iron amzn.to/4dpp0cY
Tesa Harness Tape amzn.to/3SAdG60
X Fasten Harness Tape amzn.to/4cbItNA
Non-Insulated Terminals amzn.to/4dp18XH
Short / Open Tester Power Probe amzn.to/3WRdrpu
Power Probe Master Kit amzn.to/3WPETUR
Shop Supplies:
Gloveworks Nitrile Gloves amzn.to/3WADdwW
Oil Absorbent Pads amzn.to/4ckYq48
Absorbent Pads amzn.to/3WOX64P
Brake Cleaner (Its Really Good) amzn.to/3yse3sA
Hi Brady, thanks for your tips. Greatly appreciate showing us the proper method in rebuilding final drives including CR Components in saving money on parts.
Wow great video. Tons of detail and proper professional instruction. Very impressed.
Total professional right there
hi Brady, thanks for video. Very helpful! Yesterday I finish exactly same job! The customer bring me motor and parts. that job not easy, but your video very help me thank you very much!
Awesome job! Happy to see it up and running and dry motors again!
Just a little more testing and it will be ready to go!
Love the new shop and the increased vids, thank you for going the extra mile!!
OF course you post the video a week after I did my t770. Hope I did it right lol
Thanks for the shout out Brady! Great job on the video and process of assembly!
Thanks for providing the quality parts that allow us to repair these motors, you guys are AWESOME!
Well demonstrated!! TY Brady!!!
Hey buddy I'm glad you're a bobcat tech awesome content good videos keep up the good work A1 man
Hi, thank you for all these useful and instructive videos. Here I got a Bobcat T595 with 2200 hrs on it , it is hard to steer, something getting extremely hard!! What could be the reason?
I have a 2018 t770 tailgate rear back fans one will work and the other won't then out of no where it will switch fans and the one will come on the other will go off. Fuses are good both fans do work just not the same time . Thank you
Would of been nice if I had seen this video about a month ago. Had to replace that face seal and installed it wrong and it started leaking because it got pinched when I installed it.
When installing the dual cone seal is the special seal installer tool the white circle thing not available for you to buy for the big and small motors for a customer or independent person. I always use it at work
I haven't seen one available for these smaller motors. We used them on the larger finals when I worked with CAT.
Hi what tipe of gear oil do you using for drive motor for T66? Thanks
Good morning having an issue with a 2014 M series have the code d7542 before I started, then get a code d7518 then shuts down immediately watching some of your videos I think you've had the same issue. Is it the sensor or the bushings?
How much torque do you put on the last 9 hex bolt?
Hi I have t450 leaking hydraulic oil from behind the sprocket would that be from the face seal? All the hoses and everything else is dry
That's exactly what happened to this one.
Thanks for the reply Brady. you are a superstar!
Hi friend I have a question I bought a bob cat 751 and I would like to change the accessory belts the belt that goes from the alternator to the engine I managed to remove it but but the one that goes from the motor to the fan
How concerned should I be with a broken off sprocket bolt stuck in the drive motor? I've tried welding a nut, drilling it out, etc. it just will not come out while on the machine. Don't want to heat it up too much. How would you fix?
Should not be a problem, happens all the time.
Hey Brady maybe u can help me I have a 2019 t650 and it has a intermittent m4404 if u can help me out or where I can get wire diagrams that would be grt
Email me a picture of the tag on the auxiliary controller, more than likely the controller has failed due to an internal short that was common on the older version controller.
Thank Replaced the controller and still having this issue does the machine need a relearn?
Did you replace the white auxiliary controller? What was the date code? They do need to be programmed but the code would be different.
I’m the first to like and comment
I would expect nothing less
The knowledge is unbelievable, thank you for sharing it with us.
How different is this process for a T740? I have the same issue with the seals behind the sprockets and looking to get the seal kit from the place your recommended and do it
Caterpillar has a installer tool for Duo cones. Looks like a piece of leather.
Can you do an old m46 pump?