Unlimited Drone Range (Part 2) | 4G LTE Drone | NodeMcu
ฝัง
- เผยแพร่เมื่อ 30 มี.ค. 2020
- Overcoming several problems in the previous version, I built this Unlimited Drone Range v2. Which offers usage of your Transmitter and Mobile to control the Drone.
While using your mobile devices it offers unlimited range where internet connection is available. Here it uses the cellular internet communication and if the internet
speed is slow then you can lost it. Right ? Wait, not at all. If the internet speed is slow or any disturbance appears then it will check whether the Transmitter signal is good
or not. If not then it will schedule RTL until the signal is regained. Also it offers many other features while keeping 100% safety of your drone.
🌀 Project Parts ~
NodeMcu : amzn.to/3CpKODd
Arduino : amzn.to/3bk5T6o
🌀 Drone Kit ~
BLDC motor : amzn.to/3Eoi1zH
Props : amzn.to/3mlUIQL
Lipo charger : amzn.to/2ZFT8AF
F450 frame : amzn.to/3mnmKvg
APM 2.8 : amzn.to/3vUAr8k
ESC : amzn.to/3blYzXT
Remote : amzn.to/3bjCSrq
/////////////////////////////// Diagram & Codes(Compatible for all PWM FC) //////////////////////////////
Diagram :- drive.google.com/file/d/1TQHk...
Codes for Arduino :- drive.google.com/file/d/1CxPu...
Codes for Node Mcu :- drive.google.com/file/d/1RkLh...
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////// Music & Credits //////////////////////////////////////////////////////
Song: Markvard - Time (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • Markvard - Time (Vlog ...
Song: Erik Lund - Tokyo Sunset (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Video
Song: Markvard - Desire (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • Markvard - Desire (Vlo...
Song: Jarico - Retrovi (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Video
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
#unlimited_drone_range #transmitter #4G_drone #LTE_drone #drone #DIY_drone #DIY_LIFEHACKER - แนวปฏิบัติและการใช้ชีวิต
It's been loooong since this awesome project. Next one is coming soon..😲
I am unable to give unlimited range to my drone...pls help
Bro i need ur help in my college project.. please help me bro
You deserve 1 million subscribers, very intelligent.
The word unlimited dissapears when the battery drains. 😂
Add higher mah battery
Bro I was waiting for this from last month
th-cam.com/video/ytPcFnzOIw0/w-d-xo.html check out this
Bro u deserve more than 1 M subs till now
Okay! First TH-camr with a "Hacker" title who sound that he knows what he is talking! Amazing Video! Keep going!
Very good informative video. Keep it on.... Your editing skill is so good...
You have a very good knowledge in programming and IOT.... Carry on...
Nice tutorials ! You just got one more subscriber
you deserve a AWARD OF DRONES so nicely made and explained....
great work
i really want to make one for myself
my man, I will buy a hat just to take it of for you.... its amazing what you did, code for me is chinese, dont have a drone but im trying to learn a bit before buying one to take it apart and making a project, and I thoght I knew a bit, after your video, I realize im just picking parts from the web... do you have a patreon or something, I think I speak from all of us here, but we need to get you funded so you can keep doing projects and make some money.
Keep it up bro !
Thanks!
great job little master
You're genius !
Great work brother...
Nice dude.
Yes good project cool
Nice information
You are great ...
Awesome dude✌👍
You are awesome....💕💕💕💕💕💕👍👍👍👍👍👍
Great work genius
😍awesome.take love brother
Good job
Very good
Great work by you may friend and provide good solution 🤟🤟✌✌👍👍
thanks
I am researching this content
Wow...nice...very useful video...
Awesome 😍
Thanks 🤗
this video is DEAD UNDERRATED
Nice work
great work kiddo
Fantastic brother.. 🥰
very nice.
i like ur all the information nice job u
i wait for video
Bro u help me plzz 🙏🙏
Coming soon
I have a problem !
While controlling my quadcopter with the Blynk app, usually, after entring in the loop function, the drone just stop with some beeps coming from the motor ? Please what could be the problem ?
Hi Can you give me the detailed diagram for connection if possible, because I am confused that
1.how can I connect 5 channels of the PPM receiver to D8 pin of Arduino?
2. should I connect only signal wires from output of the APM to Arduino?
Nice
Please make video for FPV camera setup in drone also using APM...Thanks
Wow
Awsome
Which one is the code that you are using to convert pwm to ppm signal? Can this method be used on pixhawk as it accepts only ppm signal?
wow
Nice bro🤠
Fantastic...but please let me know how to route telemetry from drone to PC or Mobile ,,,,,also a word about Yapua telemetry...
Excellent bro
Yeh he is best
Do u like to make drones
@@crazycreatorxyz3507 No
@@crazycreatorxyz3507 yeh bro i love em
I really appreciate your efforts....please provide the diagram for a beginner like me...how to link with mission planner...thanks
bhai dum tho hae ladke mae
So cool
Bohat mehanat kiya hai tumne, i love your work,
Mav link acche se samaj aha gaya hai tume , mere ko abhi bhi time hai samajne me prams
Can you plz make a small vdo on circuit connection of node mcu+mpu 6050 by blynk app. Is Arduino nano is used in this drone circuit?
A camera on same could be added advantage as it would enable you to control your drone...even when it is visually out of scope......keep up the great work...!!!!
Good point! UDR v3 does have that
Hi, I am Ritam from Midnapore.
Unlimited "control" range; not unlimited range (you'd need mid-air recharging for that ;) But still amazing!
Maybe add solar panel? Charge during day on landing. And fly at night.
awsome work but what if you put a camera on it and have a charging station or a solor panel on it you could
land it on a roof and then come back later and fly it again
Yes please make a full turtiol of all updated in your drone please
Obviously after all upgrade
By quad not flying in alt. Hold and loiter when I use this mode my quad not take off.
And flip any side
When I fly it in stabilize mode it can fly nice..
👌👌👌👌👌❤️❤️
Which science and which technology is used in this project of Drone. please tell me brother.
I dreamed for internet BTS drone package delivery so the drone autopiloting fly straight to decided spot far away.
1. For avoiding building collapse drone built with their realtime shared internet dash cam
2. In case the drone losing signal (maybe signed with losing video stream) the drone will idling fly for waiting signal get. Also idling fly when arriving destination point for waiting our intended. (Signal lose signed with no uplink video stream)
3. In case idling fly in destination point we will control it through our dashcam view, point to maybe our friends home window, package delivered and drone entering turning home
Bro help me I make a quadcopter with apm 2.8 when I land my drone by transmitter sticks not use rtl he come back to land but when I try to disarm I push the stick in left he not disarm and automatic fly anywhere and crash
Please reply me to help bro
HI can you suggest a readymade drone that can be sued for IoT Projects
Where can I collect this tools I want to learn about it , this is very interesting for me , and really brilliant
Everything is on internet, just need to browse
Can we use arduino uno instead of ardunino Nano. ?
Bhai havi
Boss, I have one suggestion for codes and diagrams. Make a file of codes and diagrams and compress it and upload it to Google drive and share the link in description. That's all, hope it will help you.
Ok, thanks
hey brother how can i get the gps status and arm status in a pixhawk there are no corresponding pins to do that in a pixhawk
like the apm i dont have led and gps status pins
How can the flight controller connect to channels 1-5 to node MCU when actually ESC get connected there,,,,,
Why didn't you use lora? It uses less power and has a wide range.
Bro can we use only esp8266 with logic converter without Arduino
Bhai aap ek transmitt setup video banaen APM 2. APM 2.8 setup ke liye transmitter name / fly sky fs th 9
how to wiring with esp8266 if i use mpu6050 as flight controller. and what about changes in coding
Make your own flight controller with arduino which contain evey thing like gyro, accel and GPS
I will wait for this
Sure.....also with Unlimited_Range & Obstacle Avoidance and many more......................
Brother make a video about mavlink unlimited telemetry that's really help me out and others
yeah sure
@@DIYLIFEHACKER thanks brother that's really helpful
Yes we need that
Drone:
APM->mavlink esp8266->blynk
Ground station:
Blynk->mavlink esp8266->mission planner
This is the video I needed. Why you not used arduino uno in place of nano?
smaller & cute
@@DIYLIFEHACKER That means there is only physical difference between these two's due to which you choose nano?
@@subhash5715 yes
Ive done all of it but can u give me a tutorial for analog video
In joystick how to select gp pin, in my app only virtual and digital pins are showing
What is the power back up of your drone
How can i modify it for pwn receiver eg flysky ct6b
Bhai itna telented fir bhi subscriber itne kam.....😟 Bus yehi kami hain india main....
All connection details video in drone to Wi-Fi control in mobile
Bro I give command to land my drone by transmitter sticks he come back to the ground but when I try to disarm the drone he like to not disarm it was automatically fly and crash
If Replace node mcu with esp32 it has camera also
Suparb
Bro I want to program the drone's path that where it should fly, like I want to let it fly to my friends house like that, would you please make something like that.
You have to make the use of telemetry!
Keep working
can you do this via mavlink?
Brother I have a idea 💡 about camera 📷 you can use (ip camera) I mean mini WiFi camera which you can use via the app of the camera and after connecting the camera with jiofi of the drone you can watch the video frof any were these cameras have inbuilt battery backup of 2 hrs.
Not bad at all !!!!!!
What kind of communication do you use to send the data D4, D6, D7, & D8 of nodemcu to arduino?
I don't see any of those pin in your nodemcu code
That's done in Blynk app. Pins are declared.
@@DIYLIFEHACKER is that PPM signal?
Or PWM signal?
bro please post the pin out diagram for connection... 😃
sir i made a drone using kk2.1.5 , now i am planning to use other flight controller . with which flight controller should i start with apm2.8 or pixhawk can you please guide me
pixhawk
Your Video is really Awesome.But Can you please mention list of components you have used.Thank you.
1. NodeMcu
2. Arduino Nano
3. Whole DIY drone setup
@@DIYLIFEHACKER Thank you
Please give me it's link to buy it
is it compatible with dji naza m lite
Where are you located
Brother how to contact you , I'm building a Same project z need some help pls
Tankyou bro for code
Welcome
Hello! Schematic link does nit work
IAM totally weighting for that only bro in previous video audio is not clear .and iam using same usb to ttl connector as you used to pair telemetry.but I was unable to pair.it and please make the video as detail as possible bro.as some of my friends are facing with similar problem bro so that these video can help them.by following that video i totally lost connection with air and ground module.but my ground module green led was turned solid.
Ok, I'll
brother where are u from...........??? are u pursuing engineering.....??? you are good at drone related stuffs......😊😊