RC Drift - Hobbywing XR10 Stock Spec & 10.5T Bandit motor, Setup | Install | Testing
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- We have really been enjoying RC drifting.
When comparing our car vs others we were drifting with, we noticed a lack of power.
For a ESC & motor swap, there are many brushless sensored choices out there - from drift-specific setups that cost approx $350, all the way down to cheaper stuff like what I was already running. We decided to hit that sweet spot in the middle and go with a Hobbywing XR10 Stock Spec, and the Bandito 10.5T motor.
Honestly, this ESC is smarter than I am! It has a very wide range of tuning features on it. In this video, I just start to touch on what some of them do.
If you are looking at this Hobbywing setup, or looking for more info on RC drifting, I hope this video was helpful for you. if not - I hope it was entertaining!
Want to pick this combo up??
Check them out on Amazon here:
Hobbywing XR10 Stock Spec: amzn.to/2Wx3E8V
Hobbywing Bandit 10.5T motor: amzn.to/2Wy6Pxi
Get a combo with 13.5T motor: amzn.to/2WyBZEF
Follow us on Facebook: RoadsideRC
Get previews and insights by following us on Instagram: / roadsiderc
Please subscribe, comment, and like!
Music provided by T2NATE - go check out his other work: / @t2nate137
![ผัวเถื่อน - ยูริ โตเกียวมิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/P08ORRVDGl8/mqdefault.jpg)
"Now with absolutely now real idea of what I'm doing..." 🤣🤣🤣
So modest... you make us look like club footed baboons drifting an RC car. 🤣🤣🤣
Then again, your statement is the key to all of our videos. Lol
Nice set up and car!
Ha! Thanks - glad someone appreciates my brutal honesty :)
You will like that I now also picked up a Redcat Thunder Drift. Super cheapo AWD drift car. It is going to be interesting to see how they compare.
Wow killer setup 👊🏼😎👍🏼 I gotta start practicing more drifting you make it look 🔥🔥
I just picked up a Redcat Thunder Drift to experiment with the cheaper, AWD drift options out there. It is A DIFFERENT world for sure. Be on the lookout for videos on that also.
If I am Corona-quarantined, lots of drift time!
Haha I’ll be watching bro!
Sweet setup. Got that it dialed in right👍👍
Thank you!
Oh nice what a sweet setup!
Sure is! Thank you!
You are going to love this setup, I run the same in my Associated B64. It is fairly easy to understand but I have a Pro track racer friend of mine do all my tuning for me, still only have a few degrees of timing in it on both ends. Enjoy that hobby wing growl, I know I do. 👍👊🙏
Thank you!
I love how tune-able it is, and that I already had the program card that worked with it. Now - just to learn more about it!
Awesome
Thank you!
Very cool!!
Thank you.
I've been looking to get an RMX 2.0 S, and was thinking of this very motor/esc combo! So glad I came across your video, very informative. Subscribed! Also, what pinion and spur are you using?
Glad I could help, and thanks for the sub!
The RMX2.0S really is a good platform - no doubt.
I have a whole video on gearing choices. My basic recommendation - pick up a few pinions to try what works for your surface and size of location. I believe with this new motor combo, I am at around a 18T-21T. Can't fully remember.
Here is the gearing video:
th-cam.com/video/xDl760DWfq4/w-d-xo.html
Awesome video!
Thank you - I hope it is useful for someone.
Wow first one crazy 😜
Quick on that notification button! Thank you!
Nice upgrades! And smooth driving👍
It really drives nice, that is for sure! Thank you!
Great video...
Thank you!
Nice ESC and Motor, Drifter looks nice👍👍👊😎
Thank you!
Informative stuff man. 🔥👌🔥EXCELLENT job!🔥🤜🤛🔥💯🔥
Thank you! These videos tend to be a lot of work, so I really hope it helps someone out there!
Ya they do! Just know the hard work doesn’t go unnoticed.🔥🤜🤛🔥💯🔥
Nice work I've always considered a drift car , subbed 😁👍
I never thought I would enjoy TC drifting, butbhave been surprised with how much I do!
cool install and great video
Thank you!
Can you give me a link to the wheels youre running on that and tires as well.. thank you.. love all your vids by the way.. very educational.. and have been my go to for anything drift since ive gotten into it.
Check this out, it will help:
th-cam.com/video/eONtFXKtaUo/w-d-xo.html
Thanks for sharing it doze look like a pretty fun drift car not a bad price for a rtr🙂👍👍
You are right! Great value compared to building your own!
I know its an older upload , But Could You post Your final settings for the ESC , always go over Your videos as a How to for general settings on crawlers , Now its on Drift setups , Love this Channel
Thank you!
Honestly, I don't change a lot from the base settings.
I run zero drag brake.
About 30* of timing on the motor
+10* timing turbo + 10* timing boost
Nice setup
Thank you!
Very nice. Awesome drifting, looks so easy but I know it is not 👍
When you get the car setup right, it really is pretty straightforward! I promise! I just bought a Redcat Thunder Drift to test out a cheaper, AWD option in RC drift. Be on the lookout for that!
great video, amazing footage, like 👍 👍 👍 🤝 🇷🇺
Thank you!
Hey brotha, I do plan on buying this set up. Please tell me I am able to have reverse and if so how do I activate reverse. Lol thanks
Yes, this esc does have reverse. It is one of the setup items in the esc.
Do you have a video on how to set up a futaba 4pm? Thx
I don't! Good call - I need to make one of those. Thanks for the suggestion!
Which car is it? How much, where from.. Thinking about getting a drift car🙄🤔🇬🇧 new Sub here👍
MST RMX2.0S - check out some online retailers!
Hi Troy
I have xerun xr10 pro with xerun d10 motor 10.5 . Motor directions reverse/clockwise. I tried to use Bluetooth ap, and LED Program card. But some how I can’t find options to switch motor directions on both devices. Last I tried to change through my transmitter on channel 2 normal to reverse. I was able to change the motor directions but I have no power. When I full throttle seems like i was reverse. And when I press full reverse has so much power as my throttle. .
I tried to Switch 1 of 2 wire , instead AA,BB ,CC I do AC , BB , CA . It’s run counter clockwise like I want but I loose all the boosts and turbo.
Could you please help me.? What I did wrong. Thank you 🙏
Hi Carlos,
1) for a sensored motor, you MUST keep the wiring in the correct order.
2) after reversing the throttle inputs on the controller (normal to reverse), you need to reprogram the ESC throttle setpoints.
After doing this, the car should run fine.
Would this be a good recommendation for someone with an mst rmx 2.5
Sure would be!
I ordered just about the same except I got the modified rocket 8.5T motor with a gyro would it be too much for "drifting" it or Hooning it. I am building my TT02D with a carbon chassis and still AWD to drift around like Ken block.
For an AWD car like a TT-02D, save your $$$.
You can get away with a MUCH cheaper setup.
Plus, you do not need a gyro at all.
You can also get away with a cheap radio.
Hope that helps!
Great videos! Especially during this coronavirus time. I just ordered the mst fmx. Your video will save me. Lol. Whats that unit your using to program your esc? Brand etc. Is mounting motor up high recommended?
High motor mount is typically recommended depending on the surface you are on. Helps the car rotate with the higher mass. I would start there.
@@RoadsideRC cool. Thank you
@@RoadsideRC last question. Lol🤣i watched your gearing video. For the garage that gearing did u end up with? Are they mst brand? Or that brand and place to order from. Thank u
Ah man, I don't full remember the gearing I ended up with. It was one of the ratios with more gear reduction based on the size of my space.
The gears were just random ones I purchased from my local hobby store. I believe most were Robinson Racing brand, but there are a lot of choices out there.
For this ESC, do you have to have a programmer or will it run straight out of the box?
It will run straight out of the box, but eventually you will want a programmer.
@@RoadsideRC ordering one too! Thank you for the reply. I’m getting into this hobby and your videos have been a great help! Subscribed!
Just a question if that’s cool I’m kind of new to the drift scene…So I have the Xerun XR10 Pro G2 with the V10 10.5T combo. So you just basically use the drift car preset and adjusted the boost and turbo timing to your liking is the correct?
That is pretty much it!
Works like a champ.
If I remember correctly, it also had some drag brake on it, and I removed that.
Rookie question but do you need to buy a separate on/off switch when building a chassis kit? Or does it come with the esc or motor?
It will come with the ESC!
Is there a way to change "option" without a programming card? I just want to change from default to like option 3 that will allow me to go reverse. Thanks.
I am using the hobbywing xr10 g3 with motor combo.
Check your manual - I believe you can do it through the beep/flash system.
@@RoadsideRC So I also have this issue and my manual says nothing on how to use the beep flash system other than to set throttle neutral and brake. do you have any other ideas?
If I just bought an rc and wanted only the motor. Will it be compatible with just the motor or are the connections all different
Mine only has 2 connectors to motor and esc it comes with
2-wired means it is a brushed motor.
3-wires means it is brushless
For the most part, you can swap brushed motors with different brushed motors. And you can swap brushless for other brushless motors.
There is more to it than that, but it gets you started.
hi i am building a yokomo yd2 and am looking at the hobbywing xr10pro with the v10 g3 combo, would you recommend this set up or would you advise going for the yokomo brand i will mainly be driving asphalt.
I have been very happy with my Hobbywing setup. It does great - and is a fraction of the price of the Yokomo.
Hi. Had a question. Im starting my mst rmx 2.0 buold today. I seen a video where a guy mounted the motor on top. Instead of low . Do you know if others are doing that? If its recommended?
Yep - go high mount for most situations. Sometimes people go low mount for carpet tracks, but high mount will work in most cases.
@@RoadsideRC awesome.. thank u!
@@RoadsideRC i just realized i have the mst fmx 2.0 chassis. Different moror setup..hope this model ok too. Was thinking i had the rmx. Lol. 🤣 should be ok. I dont know whats newer the rmx or fmx chassis
@@RoadsideRC hi. I finally building the mst drift . Have a ko propo gyro. I made adjustments. But cant get front wheel to stop shaking. Ive adjusted the middle one on gyro a ton of times. Its frustrating. One the ags adjustment. Ant ideas?
Did you end up tuning this any further than what you ended with in the video? Update video? Thanks for all the tips, cheers.
Only small amounts. I have messed with drag brake on/off, different throttle settings, different turbo/boost settings - but the general setup is the same.
@@RoadsideRC Thank you. I have the Hobbywing XR10 Pro Stock Spec 2S Sensored Brushless ESC/V10 G3 Combo (10.5T) on my shelf.
@@RoadsideRC Thanks man.
What values do the marks for timing go by, I want to turn mine up aswell but I have no idea where to put it
The marks are in degrees. Based on what I have mine set at, and what others around me run, I would suggest +10deg boost and +10 deg turbo
Did you have to solder any wires for this?
Yes! Connector and motor tabs need soldered.
Hi, may I know what is the rpm start for the boost you had set? 😊
This ESC came with a "drift setting". I copied the boost from there. The RPM was pretty high.
Hey brother I no this is an older video but can you program a hobbywing esc with the spektrum smart programmer or do you need a hobbywing programmer.. I'm just trying to save a few coins
I tried the other way around - programming a Spektrum with a Hobbywing programmer, and it did not work.
@@RoadsideRC thank you for the response...I love all your videos they are a huge help!
What tires are you running on please?
I use different tires for each surface I run on. Typically, Yokomo DRA, Yokomo DRC, or ReveD.
Where did u plug in your fan
I plugged the ESC fan into the ESC itself.
What’s battery is good for this hobbywing esc? 2s or 3 s ?
And what’s c rating? Thanks 🙏
I believe the ESC might be 2S only - but I have never tried. In RWD drifting, you are only allowed to run 2S.
@@RoadsideRC glad to know 2s only, because the manufacturer shows 2s-3s.
Thanks for the reply. Really appreciated
What motor is that... izzit omg or hobbywing
It is a Hobbywing. There is a link in the description.
I have a pre-owned trackstar. Is this a big difference? Also is servo chatter while car is idle? My servo is chattering and is that normal? Thanks
I don't have any direct experience with the Trackstar. Does it have adjustable boost and turbo settings?
Servo chatter while sitting still might be OK depending on the brand. Example my Savox servos are always noisy. As long as it is smooth while drifting, you are OK.
@@RoadsideRC I thought you mentioned trackstar in beginning of video, it's a red motor like mine. Enjoy your videos. Got a rmx 2.0 rtr last month and last week picked up a used yd2e. Love drifting now. Expensive compared to bashing lol
Ah yes! The motor was a track star. The ESC was a super old Hobbywing.
Glad that you have picked it up!
It is expensive to get into, but after is cheap. You never break anything!
I picked up the same motor esc combo. What lipo ru running?
I have a couple random 2S batteries I use. Two are standard "shorty" batteries. An Ovonic and a Dynamite, I think. I also have two small 2000-2200mah batteries that work for shorter runs.
Thank you!
Can I get a link to the programmer that you are using?
Here you go!
amzn.to/3lnIHdr
Thanks! I ordered the xr10 pro 13.5t bandit g2 combo should be delivered today. If you have suggestions for someones first time soldering and setting up and calibrating them, itd be much apreciated!
Have patience with your soldering.
Setup:
30* if timing on the motor
10* timing in both boost and turbo
Set the startup level as low as it let's you.
Set the exponential on your transmitter to be as soft as possible
After you try it, you may need to gear up. That 13.5T motor will not give you as much wheel speed as a 10.5T
Why 10.5?
That is the max motor you can run in many rc drift events. Having driven a 13.5T setup also, the extra wheelsoeed of the 10.5T really helps.
Ya need a 21.5T motor and turn down the sensitivity on your throttle.
I went from a 13.5T - the 10.5T would be more useful in a bigger location, like our normal drift track was.
@@RoadsideRC
Ha!
Location specific for sure. We're have the 10.5cin our 4WD drifts. The 21.5 with a smaller pinion seems to be better for tighter tracks for 2WD chassis. .
Cool video, nice job.🤘
@@RockandRollRC Thanks - that makes sense.
Old motor giveaway?
Good idea, but I have other plans for it at the moment!
Ok cool looking forward to it
Hi. I would like to talk to you about your old motor. Can we?
The old motor has been put into a different vehicle already!
@@RoadsideRC okey. Thank you anyway.
Still needs a big cheesie Wang. Lol
Ha! I sound get some cardboard and make one as a joke! :)
@@RoadsideRC milk jug makes a nice parts and light.