Great video - many thanks BTW, if the roof is not opening properly, you can try resetting it using this process open the valve, manually close the roof then close the valve start the engine and cycle the roof open and close it worked for me
Very useful. Thanks - saved me as the heavy rain started. Just a thought (although I know it needs to go to a repair shop) is it worth just closing the hydraulic screw straight away again as a precaution so it isn't missed?
Hi my friend was helping close the roof manually yesterday and didn't clip the ball joint in properly. It came off and wouldn't clip back on, then fell down into the abyss - any idea where I can buy a replacement, or what this part is called? Thanks
Itshould come out ifyou give it a good tug, your problem will mostly be getting the spline back in to lock it down. What happens is the little motorthat the spline connects too shifts a little so the two splines don't line up anymore. Then you have to put a little power too the motor so the spline lines up again, then you can reinsert the pin. Thats what i did on my MK2,
The tool u used to lock it again is missing on my tt8j. Any ideas, where to order a new one? Can't find it on the net. Thanks a lot! Great video by the way!
Same junk system bmw and all German car makers use for auto tops. Really? I miss my old E30 manual drop top. One had, flip,fold and drop. One had pull, drop, lock and go. When did we get so lazy to put up with this garbage...
Great video - many thanks
BTW, if the roof is not opening properly, you can try resetting it using this process
open the valve, manually close the roof
then close the valve
start the engine and cycle the roof open and close
it worked for me
Thank you. This was a life saver.
Thanks mate something straight forward and not prolonged
Very good and clear video. My problem is getting the pressure to release. Nightmare!
Very useful. Thanks - saved me as the heavy rain started. Just a thought (although I know it needs to go to a repair shop) is it worth just closing the hydraulic screw straight away again as a precaution so it isn't missed?
No harm in closing screw, especially as inexperienced repairers sometimes think pump has failed !
Great run through. Very clear!
You just saved my day! Thank you 🙏🏻🙏🏻🙏🏻
Thanks !!!
After doing that - making it manual I presume you can then drive it top down if you want to?
Thx for posting and yes this video was a MASSIVE help
I just bought one,but I can't find the manual release key anywhere on Google.Any ideas?
Try the dealer.
I have one video saying the spline goes back in and this one saying it doesn’t. Is the car safe to drive?
Hi
Spline won't always go back in, as long as it's locked all the way, it would be fine
Life saver, thank you so much 👍
wonderful. It was very easy to understand
Hi my friend was helping close the roof manually yesterday and didn't clip the ball joint in properly. It came off and wouldn't clip back on, then fell down into the abyss - any idea where I can buy a replacement, or what this part is called? Thanks
Hi
It's called a linkage, you can buy a repair kit from the Audi dealer local to you.
Or we could arrange one for you
Regards
Team VagPro
My brother do you know what is that tool called??? The one to open the soft top! Or where could i get it from
The manual release key you can buy from Audi main dealer
Part number 8J7825381A
The original spline isn’t coming out, how hard should I be pulling yo get it out?
Hi it should come out unless jammed
Typically a bit of a wiggle and the come out
Don't twist it, as it'll only break the tool
Itshould come out ifyou give it a good tug, your problem will mostly be getting the spline back in to lock it down. What happens is the little motorthat the spline connects too shifts a little so the two splines don't line up anymore. Then you have to put a little power too the motor so the spline lines up again, then you can reinsert the pin. Thats what i did on my MK2,
Thanks for posting
Why does it need to go to the repair shop? Because the Hydraulic pressure?
Xantylon74
If it doesn't close and you have to close manually this is because there is a fault
This is why you take it to a repair shop
The tool u used to lock it again is missing on my tt8j. Any ideas, where to order a new one? Can't find it on the net. Thanks a lot! Great video by the way!
Alexander von Humboldt
Hi
Main dealers, approx £15
@@CabrioletTech gonna ask for it, thanx dude
Hey Guys.. I was changing battery with the roof down... Since changing battery no power in roof.. Any ideas
Start by scanning the vehicle
Regards
Team VagPro
@@CabrioletTech I got lucky I'd say... I disconnected battery for 20min an reconnected an it started working... Thank you for the video 🤙🤙🤙
Much appreciated big kiss x
many thanks for you help
My motor opens and closes locking mechanism but won't bring roof up or down, any ideas anyone?
How to open it?
Great info . Thanks
Best trick one Meck want me to pay 500aed to just fix I watch ur vdo and it’s done 🤟🏻😅
Thanks man!
Just great! Good to know. However, I hope I never need to do this.
Same junk system bmw and all German car makers use for auto tops. Really? I miss my old E30 manual drop top. One had, flip,fold and drop. One had pull, drop, lock and go. When did we get so lazy to put up with this garbage...