Plastering Walls With Sand Cement short PLASTERING TUTORIAL STUCCO SAND & CEMENT PLASTERING

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 ก.ย. 2024
  • plastering concrete block / brick wall with sand and cement aka stucco ready for the skimming plaster to finish it off, This is the undercoat for the top coat of finishing plaster gypsum for skimming #render #sandandcement #plastering
    HOW TO RENDER SAND AND CEMENT A WALL READY FOR PLASTER OR TILES ON AN OLD WALL
    Hi everyone this is a video in which I show you a lot of tips on how to go about re rendering an old dusty wall that had loose plaster on it covering the basics and the must dos and don'ts this demo could help the diyer a lot or even a homeowner understand what must be done.
    If the video helped or you just like watching plastering be sure to thumbs up and mac scribe for more mac attacks :):)
    Spear and Jackson bucket trowel that is still going strong for me after many years = amzn.to/2pcpReS
    The pointsman hawk = amzn.to/2O1nKmp
    Refina trowel pack and holder = amzn.to/33PbCvi
    microphones used =
    USB Microphone MAONO = amzn.to/2MQLJnK
    Lavalier = amzn.to/33He7iR
    Blue Microphones Snowball Microphone - Black = amzn.to/2P0OINg
    camera used = amzn.to/34Nx8AX
    All amazon links are affiliated links will cost no extra to buy from but we might get a %
    tools links direct
    www.refina.co.uk/
    How to sand and cement render concrete block wall 1st coat scratch coat DIY
    • How to sand and cement...
    Find us and like us here
    / macplasterin. .
    Tweet us here
    / macplastering
    / macplasteringservices
    our amazon store affiliate www.amazon.co....
    n the video I use a lot of tools I use the refina mega mixer to make the sand and cement in the large 40 liter refina tube I use a refina trowel with a pointsman hawk to apply the render an aluminum straight edge or know as a refina feather edge and a 1200mm speedskim on my skimming to get the wall straight and ready to be floated. Then I just use a float to rub it up which has nails though it to give a key for the next coat or tiles.

ความคิดเห็น • 32

  • @joseeduardobarrundia332
    @joseeduardobarrundia332 3 หลายเดือนก่อน +1

    Este es un verdadero plaster se le nota en el manejo de la herramienta

    • @macplastering
      @macplastering  3 หลายเดือนก่อน

      Thank you my friend

  • @indisugartaufik
    @indisugartaufik ปีที่แล้ว +1

    Great work as always! 😊

    • @macplastering
      @macplastering  ปีที่แล้ว

      Thank you my friend hope your doing well

    • @macplastering
      @macplastering  ปีที่แล้ว

      A few new videos coming live should be a nice watch :) This Sunday and next :)

  • @TeeTee-zm2re
    @TeeTee-zm2re ปีที่แล้ว +1

    Need to get me one of those feather edgers

    • @macplastering
      @macplastering  ปีที่แล้ว

      find them great for the bases outside helps set it of some

  • @epiphgd4302
    @epiphgd4302 5 หลายเดือนก่อน +1

    Hi there, I’ve an old block exterior wall needing plastered. Do I need to power hose it first and apply anything before a scratch coat?

    • @macplastering
      @macplastering  5 หลายเดือนก่อน

      Possibly a power wash might be enough then scratch and a day or so later top coat n finish. If not sure you could paint some sbr on it also have that on other videos or scud

  • @alabinibop
    @alabinibop ปีที่แล้ว +1

    Made short work of that mate. Was that just a 4-1 with plasticiser?

    • @macplastering
      @macplastering  ปีที่แล้ว +1

      It was mate a little stiff but OK for this we wall

    • @macplastering
      @macplastering  ปีที่แล้ว

      A few new videos coming live should be a nice watch :) This Sunday and next :) might be some of my best yet

  • @Smith-os1ho
    @Smith-os1ho ปีที่แล้ว +1

    What your go to trowel, any preference

    • @macplastering
      @macplastering  ปีที่แล้ว

      Refina on the most mate

    • @macplastering
      @macplastering  ปีที่แล้ว

      A few new videos coming live should be a nice watch :) This Sunday and next :) might be some of my best yet

  • @ianturner8459
    @ianturner8459 ปีที่แล้ว +1

    What feather edge you using there Mac?

    • @macplastering
      @macplastering  ปีที่แล้ว +1

      Nuce refuna mate new so light and sharp

    • @macplastering
      @macplastering  ปีที่แล้ว

      A few new videos coming live should be a nice watch :) This Sunday and next :) might be some of my best yet

  • @Frankieee-bj6nu
    @Frankieee-bj6nu ปีที่แล้ว +1

    Whats the refina trowls like mate do they take alot to break in?

    • @macplastering
      @macplastering  ปีที่แล้ว

      Can take a few weeks floating but when broken in I wouldn't leave the house without it =]

    • @Frankieee-bj6nu
      @Frankieee-bj6nu ปีที่แล้ว +1

      @@macplastering are they stiff mate or have they got abit flex in the blade ? I tried one of them nela trowls but it was like using a brick

    • @macplastering
      @macplastering  ปีที่แล้ว

      @@Frankieee-bj6nu stiff enough and then they do have a more flexi it's good to I like a solid one for coating and 1st 2nd trowel then suoerflex

    • @Frankieee-bj6nu
      @Frankieee-bj6nu ปีที่แล้ว +1

      @@macplastering I’ll give one a try cheers bud what size is the one your using in the video ?

    • @macplastering
      @macplastering  ปีที่แล้ว

      @@Frankieee-bj6nu think it's 14

  • @sabkhan8347
    @sabkhan8347 ปีที่แล้ว

    how much per room do plasters charge please standard room 4 meters

    • @macplastering
      @macplastering  ปีที่แล้ว

      all depends where you are

    • @sabkhan8347
      @sabkhan8347 ปีที่แล้ว

      Birmingham

    • @macplastering
      @macplastering  ปีที่แล้ว

      @@sabkhan8347 not sure what them fellas are charging over there mate

  • @lochocost
    @lochocost ปีที่แล้ว +1

    так собі майстер...