Atomic MRX | BZ5 Turnbuckles for Camber adjustment
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- I made this video on 9/18/2024.
Part Number: BZ5-UP13
I made this modification to make the camber adjustment easier using a .9mm hex key as opposed to have to remove, twist, add the stock upper arms and doing trial and error. Especially harder if the car is on the Setup Station. Note that I made this video and modification before the release of the DWS frontend. I've already preordered the DWS and Caster from Wolfram RC. See links below:
MRX 1/28 Pan Car Kit - Atomic:
www.wolframrc....
MRX DWS (Double Wishbone Suspension):
www.wolframrc....
MRX 1.5° Caster Mount for DWS:
www.wolframrc....
Do this modification at your own risk!
For this mod, I used 1.5mm drill bit, hobby knife, 400 grit sand paper and 2000 grit sand paper.
Car Setup:
Front:
Axle: v2
Springs: Red
Camber: 1.5°
Toe: 3°
Droop: .4mm
Ride Height: 1.9mm
Tires: KS1142 (tape/no sidewall glue)
Wheels: PN F1 20mm, 0 offset
Rear
Springs: Red sides, Brown top
Droop: .5mm
Ride Height: 1.9mm
Tires: Marka 15 Radials (tape/no sidewall glue)
Wheels: PN F1 20mm, +3 offset
Misc:
Grease: Kyosho 30K
Ball Diff: PN hardware, Kyosho steel shaft, Carbide diff balls (half)
GL-SD-ESC-010T (blinky)
Rocket 2500KV
MRCP RX
GNB LIHV Green Lipo
The MRX is a nice looking chassis. That rear pod mount system looks innovative. Atomic always making new stuff.
Classic Tjay-precision tuning tutorial!
Hey Larry, Thanks for stopping by and commenting! Appreciate that! You already know how to reach me, hit me up whenever you get back in the Z game. ;) 👊
Nice looking car!
@@loopie007 thanks!
That's a nice mod dude! Will you be swapping out the standard front suspension for the new DWS system?
@@sylvestermilosevic Yes. I’m just waiting for it to come in the mail. I only want the DWS for ease of tuning and maintenance. I don’t know if there’s performance benefits. I mean there should be but we’ll find out. I only bought it for efficiency when servicing the car (turning screw vs removing shims, …).
@@tjaymacRC same here, I can't wait!