Clean the mat with isopropyl alcohol. Gotta' rub, but it comes off. Spring loaded USB cables will really launch whatever small device is attached to them when they fail. If they had a _manual_ lock on them, they'd be worth something.
That "velvet-feel" coating on plastic is total rubbish, from long term perspective. It **decays** into horrible gunk that peels off. Happened to my joystick.
Regular ethyl alcohol works better, it's just the anti-drinking propaganda that makes us use the inferior IPA. Also, the dye will diffuse into the plastic if you don't wash it off soon, so hurry up, Dave!
Truer words where never spoken when Dave said it's better if your projects 'don't work'. You learn so much more from your mistakes than you do from your successes. Failures make you dig in and figure out what you did wrong which forces you to have to learn to understand how things work. It's really hard to get this kind of knowledge any other way. Regarding free ranging children, my mother would probably have a heart attack if she knew where my sister and I wondered off to as 9-10 year old children back in the days when kids had adventure (60s - 70s)..
24:04 It says "For further specifications apply to the instruction manual for semiconductor strain gauges. The quality of the strain gauges complies with the respective rulings or requirements as sited in the contract."
Wow, I have one of those Radioshack T-shirts too! I just bought mine at the store before it closed down. I feel like I should save it for posterity, but I just want to wear it around everywhere.
That texture is TPE (ThermoPlastic Elastomer). It is over-molded on the exterior of a stronger plastic (usually) to create a comfortable "feel" for the consumer.
Use sharpie marker to clean off sharpie marker! It's super simple: take your sharpie, and scribble all over the mark you want to remove, then immediately wipe it off. The solvent in the sharpie marker will dissolve the sharpie on the object and allow it to be removed, as long as you wipe it off before it evaporates again.
There are two strain guages supplied to both go in the bridge. one under compression and one under tension as they are squeezed and pulled when attached top and bottom a sort of push pull in the bridge
Dave, the zigzag antenna pattern is not there to "get the wavelength." The pattern acts as a coil, getting down the impedance to the desired matching value of the driver. Most transmitters with undersized antennas will have a trimmable coil like that to get reasonable power output.
On the velvet feel I have seen it done with “soft touch paint”. BMW uses that in their interior parts. One of my friends use to be the technical supervisor at one of the supply plants in Spartanburg SC. His facility made dashes and center consoles for the Z3’s.
LOL. First time I heard you got something from Slovakia :) So fun to hear people from abroad how they break their tongues on our cryptic slavic language.
Always like that you spend a few extra minutes giving the young folks some advice, and if I may I have a couple of other suggestions for Michael. Make a trip to thrift stores (Goodwill, Salvation Army, etc.) and you can find radios, video cameras and yes on a lucky day some test equipment. So for a few buck you can get some stuff to teardown, learn about and start collecting parts to build projects. Also, if you live in a city with a university they will from time to time have surplus sales, and you can find some amazing items on the cheap. Cheers, Mark PS: At university auctions items are often sold in lots, but you don’t have to by the whole lot, but can usually get an item or two for a few buck from the lot winner.
24:03 "Other tech specs you can find in the service manual for semiconductor strain gates." "Semiconductor strain gates matches working conditions described in a law" Something like that)
Dave, if you are very careful a little bit of paint thinner on a cotton swab will remove that permanent ink from your ESD mat. Great video too, thanks!
At 7:52 - Dave - I picked up the Radio Shack T-Shirt on my very last trip to the local store for some bankruptcy bargain hunting. It was interesting as the store was full of people who grew up on RS and were collectively reminiscing about the "good old times". I saw the shirt and knew you had to have one!
11. that is really great :) When I was a boy I was really in to electronics, made a lot of different setups, but gosh I wish there was, well Internet and you back then :) I really enjoy the EEV blog.
Dave is really good at encouraging the next generation and teaching them to turn a mistake into a lesson learned :) very nice of you sir -- keep doing the good work!
That open wound cap reminded me of my xmas decorations as a kid. My Dad work in the vacuum metallising & slitting room at S.T.C. (Standard Telephone & Cables) in Paignton, Devon in the 1970's making caps just like that. I used to get rolls & rolls of that stuff & it got spread around everywhere at xmas!
Yeah the soft touch silicone was on everything in 2005 or so. It tends to disintegrate into a sticky mess in 2 or 3 years that takes an enormous amount of elbow grease to remove.
It was good to see how much fun Dave had with old Tesla components :) . I also have a bunch of them, mainly got from an old Tesla television set (black and white, no remote control, cca 70's vintage). Maybe, it was a bit mistake to destroy it, but it was not working.
"Paddy's wigwam" a wigwam as in an American Indian's home and you got the right picture. He also mentioned that he'd _"half inched"_ the mail bag which is rhyming slang, "half inched" = pinched (stolen). It doesn't necessarily means it's literally stolen, it probably fell of the back of lorry ;-)
+1 me aswell. I study at FEI STUBA (Faculty of Electrical Engeneering at Slovak Technical University). I never thought that there are actually so many people watching from Slovakia. By the way I have also a lot of old Tesla components ...
Mb0ts , you have my sympathy... For your patriotism :) If I somehow can be helpful with something, feel free to ask ;) Znova sa ukazuje, že blízkosť ľudí vzďaľuje a vzdialenosť zbližuje...
On the one hand, Radio Shack charged me $6.95 US for a 555 timer, but on the other... there's nothing like an electronics shop within 500 miles of my house.
My favorite thing about the mail bag is that I can go back and watch any of them and they're still totally relevant! Okay, maybe it's not the Year of the Goat anymore, but still!
For reference, csr is Cambridge Silicon Radio. They're really good. They also made the new CSR 4 USB dongles on ebay with the microscopic radios. Really amazing technology.
Dave, et. al., I have one of those DSO quad-channel pocket scopes, and a Velleman single channel monochrome pocket scope also. My issues are a lot of the work I do is out in the field and my wife and I live in a small apartment (flat). Why are they called "apartments" when they're all stuck together? Space at quite the premium for us and I can't see having a bench scope right now. That's on the list for after we get a house.
Radio Shack still exists just on the Internet, you can order these shirts from there web site. They also have some of the stuff they used to sell in stores, just with less selection. Why they still exist does not make sense, instead of having a better selection they actually often run out of the few things they have available on the web site.
RadioShack actually sold those shirts in their stores for a short while during the summer of 2014, one of their final "moment of panic" attempts to get more customers in their stores before tanking.
They (jokingly) call the second Cathedral 'Paddy's Wigwam' because it resembles a Native American Teepee or Wig Wam. Paddy is the colloquial term for Irish people who are also renowned for building it. It is also Catholic and many Irish are also Catholics, there is a very large Irish population in Liverpool too. People from Liverpool are known as Scouse or Scousers and also Liverpudlians and are very proud of their sense of humour so no offence taken or meant ;-)
Dave, why didn't you measured those old tesla parts!, check if that cap is still in spec!, make that xtal work to see how accurate it is and how it changes with temp
The cap could still be in spec - it is a foil type. I havend measured it... unfortunately that was the last piece I had :-) For the xtal - I have still some of them so I can try to measure one from the same kind...
Arjan Wilbie I have no idea... Probably it was used in the meteorological drones/satelites developed in our department during the cooperation with USSR on the project INTERKOZMOS. Some of the older professors still live - I can try to ask them.
***** with the 100 Kcs known as the km band it is ideal for long distance transmitting as the ground wave follows the contour of the earth. You have a spare i can play with? A tracking device for my vehicle :)
SSH MK I've used rubbing alcohol before. It works, but the faster you hit it with alcohol, the easier it comes off. If it doesn't work at first, I'd brute force it, and make a puddle and let it soak for a few minutes. And then even scrub it a bit with something abrasive or non-abrasive.
to remove the permanent marker, use some pure Ethanol, or rubbing alcohol as you may call it, we use it in the Lab all day to remove our markings on the Tubes before we stick them in the dishwasher
Not all 9V batteries use "AAAA" cells. Some use small flat cells that are stacked. You can tell what batteries use what configuration by their part number 6LF22= FLAT STACKED CELLS, 6LR22= "AAAA" CELLS, The key is in the part number. 6L"F"22 F= flat cells and 6L"R"22 R= round cells or "AAAA"
Robo Kupka ale nevidel som este nikdy, ze by niekto poslal nieco zo Slovenska. Ale je pravda, ze ked Dave predaval to jeho pravitko uruler tak som videl, ze to posielal asi 20 ludom na Slovensku.
d-_-b Ďakujem za pozdrav ElectroUniverse ! Popravde som vlastne chcel zistiť, či niekto z SK tiež sleduje EEVblog, hh. POVEDLO SE! Yes, there is a another fan from Slovakia ;)
I've made a digital speedo for my holden because the mechanical one is non-linear and a good 10k out on the upper end. my one does km/h and takes the sense from the back of the speedo, there is a reed switch on the rotating side which coincides with the wheel rotation. the speedo is within 2 - 3 k of my GPS and some small improvements may make that better and with a small code change I can get it to do miles per hour
I bought that Cypress BLE devkit and the demo firmware doesn't advertise on BLE for very long before going to sleep, maybe 30 seconds to a minute. One of the buttons wakes it up.
My initial reaction is to use a little bit of nail polish remover or diluted acetone, and rub it on the mat. However, that could rub away some of the material on top.
Dave, use a colourless blender pen to get the permanent marker off. They work a treat. I sell second-hand games for a living, and these things can get texta off of cartridges that has been on there for 20 years. It'll cost you $7 from Riot art and Craft. They look exactly like a normal marker but there is no dye in them - only the solvent.
I don't like alcohol that much for cleaning, plus IPA is expensive. Its dry and aggressive. But if you want it to be oil free, ok. Usually I just try some white gas/lighter fluid first. Works a charm on PCB, tools, hardware parts etc. If that don't work then maybe either some alcohol or naphta, or something more aggressive (acetone, thinner).
EEVblog I normally just rub the surface with a rubber to remove permanent marker, but it might just lead to the rubber making a big smudge if you get the wrong type or the wrong surface.
I think that velvety feeling plastic on that USB hub is often referred to as "rubberized plastic", or at least that's what I've heard it called and know it as. I think I've got at least one USB flash drive kicking around somewhere with that type of finish.
I'm gonna miss radio shack. I don't like to buy parts online, even though it's so much cheaper, there's just something satisfying about being able to pick up what you're looking at and physically inspect the part before buying it. Guess I'll have to get my 74xx and 2Nxxxxs somewhere else now.
Uh, I don't know about 9v batteries not being able to supply 1a, and 9v I have drop out around 6v anyway, but yeah, that's quite a bit of power not used between 7v and 6v. I have blown 11a fuses in multimeters testing the internal resistance of 9v before, going off the amps delivered on dead short. I guess it depends on the battery.
Does ANYONE know how to get this BTTF Speedo? Ive been trying since 2009 to buy it from their site(s). The Schematics and Gerbers arent avaiable on their blog and theres no shop to buy it from.
Lol Memphis is a city, ME=Maine. I had never considered what a bad idea using a 9V battery to power a 5V regulator would be. So many examples on the internets showing just that. Anyway good episode, so funny hearing you gripe about the recycled paper padded envelopes.
Gday Dave, If you need to clean that permanent marker of your bench theres a product called "Orange Power" made by Planet Ark. They sell it in the supermarkets as a air freshener, but you can use it as a cleaner. My wife works in a supermarket and uses this product to clean the benches at the checkouts with this stuff. I've tried it and it works a treat. cheers
Once I get a job under university, I will drop a few bucks to send in a bag of old tesla stuff. There are electrolitic caps that are still spot on even after like 40 years :D
I wonder. When do the cows come home? A rough date would be enough for me. And what's the right angle to hold my tongue at for various tasks? Is it the same every time? Is there a way to calculate that? And who is flyn who apparently gets into everything?
When i worked in crane repair i would find those strain gauges stuck all over the place, they were basically a throw away item so the engineers would not even bother to remove them after testing, LOL
![ละลาย (LALALYE) - DAOU PITTAYA ต้าห์อู๋ พิทยา [OFFICIAL MV]](http://i.ytimg.com/vi/wo6r9TgausI/mqdefault.jpg)
Clean the mat with isopropyl alcohol. Gotta' rub, but it comes off.
Spring loaded USB cables will really launch whatever small device is attached to them when they fail. If they had a _manual_ lock on them, they'd be worth something.
That "velvet-feel" coating on plastic is total rubbish, from long term perspective. It **decays** into horrible gunk that peels off. Happened to my joystick.
But if it is like sanded plastic (like the back of the nexus 7 and nexus 5) it feels pretty awesome and "lasts even longer than glossy
itzJanuary *glossy plastics
Happened to an mp3 plater i had, even seen car interiors with that stuff deteriorated and gone all sticky and yuck
Great while it lasts though :D
+Jaroslav Malec You are aware that the cheapest, crappiest electronics made are for gamers? That's probably why it decayed.
Isopropyl alcohol removes sharpie stains.
And acetone removes the color of the mat as well. Acetone removes everything.
Shawn Swift Simply rub a dry erase overtop of a permanent marker... easy.
Ciprian Cristea I read that as "acetylene removes everything". and yes it does.
Regular ethyl alcohol works better, it's just the anti-drinking propaganda that makes us use the inferior IPA. Also, the dye will diffuse into the plastic if you don't wash it off soon, so hurry up, Dave!
Ciprian Cristea
Acetone is pretty strong, but nitro solvents such as C6000 are even more powerful. Dissolves it all but bakelite!
Truer words where never spoken when Dave said it's better if your projects 'don't work'. You learn so much more from your mistakes than you do from your successes. Failures make you dig in and figure out what you did wrong which forces you to have to learn to understand how things work. It's really hard to get this kind of knowledge any other way.
Regarding free ranging children, my mother would probably have a heart attack if she knew where my sister and I wondered off to as 9-10 year old children back in the days when kids had adventure (60s - 70s)..
24:04 It says "For further specifications apply to the instruction manual for semiconductor strain gauges. The quality of the strain gauges complies with the respective rulings or requirements as sited in the contract."
Wow, I have one of those Radioshack T-shirts too! I just bought mine at the store before it closed down. I feel like I should save it for posterity, but I just want to wear it around everywhere.
That texture is TPE (ThermoPlastic Elastomer). It is over-molded on the exterior of a stronger plastic (usually) to create a comfortable "feel" for the consumer.
Use sharpie marker to clean off sharpie marker! It's super simple: take your sharpie, and scribble all over the mark you want to remove, then immediately wipe it off. The solvent in the sharpie marker will dissolve the sharpie on the object and allow it to be removed, as long as you wipe it off before it evaporates again.
Dreaded Vapour why, it works. (For non-porous surfaces.) You have to do it a little at a time for large marks though.
There are two strain guages supplied to both go in the bridge.
one under compression and one under tension as they are squeezed and pulled when attached top and bottom a sort of push pull in the bridge
Dave, the zigzag antenna pattern is not there to "get the wavelength." The pattern acts as a coil, getting down the impedance to the desired matching value of the driver. Most transmitters with undersized antennas will have a trimmable coil like that to get reasonable power output.
On the velvet feel I have seen it done with “soft touch paint”. BMW uses that in their interior parts. One of my friends use to be the technical supervisor at one of the supply plants in Spartanburg SC. His facility made dashes and center consoles for the Z3’s.
Thanks Dave. BTW, No, you did say that it's better for beginners to learn to use an analog scope first because the digital does everything for you.
TESLA it was a electronic factory in Cechoslovakia Republic in 80's. It produced TV, Radio and other electronic stuff for East Europe.
Dave, the padded mailbags usually have a small tab along the edge that you can pull to open. This method does not expose the padding :)
LOL. First time I heard you got something from Slovakia :)
So fun to hear people from abroad how they break their tongues on our cryptic slavic language.
my favorite word was Košice :)
Kosajs. Ale ani Chminianska nova ves nesklamala :)
As others have pointed out, ethanol and isopropanol will remove it. CA glue solvent will also do a somewhat better job if you have it, though.
Always like that you spend a few extra minutes giving the young folks some advice, and if I may I have a couple of other suggestions for Michael. Make a trip to thrift stores (Goodwill, Salvation Army, etc.) and you can find radios, video cameras and yes on a lucky day some test equipment. So for a few buck you can get some stuff to teardown, learn about and start collecting parts to build projects. Also, if you live in a city with a university they will from time to time have surplus sales, and you can find some amazing items on the cheap.
Cheers,
Mark
PS: At university auctions items are often sold in lots, but you don’t have to by the whole lot, but can usually get an item or two for a few buck from the lot winner.
24:03
"Other tech specs you can find in the service manual for semiconductor strain gates."
"Semiconductor strain gates matches working conditions described in a law"
Something like that)
Dave, if you are very careful a little bit of paint thinner on a cotton swab will remove that permanent ink from your ESD mat. Great video too, thanks!
At 7:52 - Dave - I picked up the Radio Shack T-Shirt on my very last trip to the local store for some bankruptcy bargain hunting. It was interesting as the store was full of people who grew up on RS and were collectively reminiscing about the "good old times". I saw the shirt and knew you had to have one!
11. that is really great :)
When I was a boy I was really in to electronics, made a lot of different setups, but gosh I wish there was, well Internet and you back then :)
I really enjoy the EEV blog.
Dave is really good at encouraging the next generation and teaching them to turn a mistake into a lesson learned :) very nice of you sir -- keep doing the good work!
That open wound cap reminded me of my xmas decorations as a kid. My Dad work in the vacuum metallising & slitting room at S.T.C. (Standard Telephone & Cables) in Paignton, Devon in the 1970's making caps just like that. I used to get rolls & rolls of that stuff & it got spread around everywhere at xmas!
Yeah the soft touch silicone was on everything in 2005 or so. It tends to disintegrate into a sticky mess in 2 or 3 years that takes an enormous amount of elbow grease to remove.
It was good to see how much fun Dave had with old Tesla components :) . I also have a bunch of them, mainly got from an old Tesla television set (black and white, no remote control, cca 70's vintage). Maybe, it was a bit mistake to destroy it, but it was not working.
"Paddy's wigwam" a wigwam as in an American Indian's home and you got the right picture. He also mentioned that he'd _"half inched"_ the mail bag which is rhyming slang, "half inched" = pinched (stolen). It doesn't necessarily means it's literally stolen, it probably fell of the back of lorry ;-)
im from slovakia too infact im stuyding the same university as the guy who sent the package. its good to hear that even people here watch eevblog.
I am from slovakia too
+1 me aswell. I study at FEI STUBA (Faculty of Electrical Engeneering at Slovak Technical University). I never thought that there are actually so many people watching from Slovakia. By the way I have also a lot of old Tesla components ...
Mb0ts , you have my sympathy... For your patriotism :) If I somehow can be helpful with something, feel free to ask ;) Znova sa ukazuje, že blízkosť ľudí vzďaľuje a vzdialenosť zbližuje...
Im from slovakia living in aust!
watching from slovakia too (je nas tu asi dost)
On the one hand, Radio Shack charged me $6.95 US for a 555 timer, but on the other... there's nothing like an electronics shop within 500 miles of my house.
My favorite thing about the mail bag is that I can go back and watch any of them and they're still totally relevant!
Okay, maybe it's not the Year of the Goat anymore, but still!
For reference, csr is Cambridge Silicon Radio. They're really good. They also made the new CSR 4 USB dongles on ebay with the microscopic radios. Really amazing technology.
The link for the "GPS based Back To The Future speedometer display" takes you to a racing blog.
The Scope was turned upside down in the last Mail bag.
Dave, et. al., I have one of those DSO quad-channel pocket scopes, and a Velleman single channel monochrome pocket scope also. My issues are a lot of the work I do is out in the field and my wife and I live in a small apartment (flat). Why are they called "apartments" when they're all stuck together? Space at quite the premium for us and I can't see having a bench scope right now. That's on the list for after we get a house.
Radio Shack still exists just on the Internet, you can order these shirts from there web site. They also have some of the stuff they used to sell in stores, just with less selection. Why they still exist does not make sense, instead of having a better selection they actually often run out of the few things they have available on the web site.
RadioShack actually sold those shirts in their stores for a short while during the summer of 2014, one of their final "moment of panic" attempts to get more customers in their stores before tanking.
They (jokingly) call the second Cathedral 'Paddy's Wigwam' because it resembles a Native American Teepee or Wig Wam. Paddy is the colloquial term for Irish people who are also renowned for building it. It is also Catholic and many Irish are also Catholics, there is a very large Irish population in Liverpool too.
People from Liverpool are known as Scouse or Scousers and also Liverpudlians and are very proud of their sense of humour so no offence taken or meant ;-)
Dave,
why didn't you measured those old tesla parts!, check if that cap is still in spec!, make that xtal work to see how accurate it is and how it changes with temp
The cap could still be in spec - it is a foil type. I havend measured it... unfortunately that was the last piece I had :-) For the xtal - I have still some of them so I can try to measure one from the same kind...
*****
cool, you could heat it, poke it and see how it affects, it looks very big and that means it should piezo by hitting it!
***** those 100 Kcs crystals, if i am correct it is LW and that frequency goes far. What was it used for?
Arjan Wilbie I have no idea... Probably it was used in the meteorological drones/satelites developed in our department during the cooperation with USSR on the project INTERKOZMOS. Some of the older professors still live - I can try to ask them.
***** with the 100 Kcs known as the km band it is ideal for long distance transmitting as the ground wave follows the contour of the earth. You have a spare i can play with? A tracking device for my vehicle :)
I'm not sure what that anti-static mat is made of, but wiping with rubbing alcohol on a piece of cloth does the trick.
disappointed that the calendar doesn't have a light to indicate the current date
try putting some non-permanent market on the permanent marker before cleaning it off, it works on whiteboards
Brascofarian Nope, doesn't work.
EEVblog I don't know if it will work on fabric but I normally spray deodorant on permanent marker to remove it.
96% Alcohol (ethyl alcohol), Isopropyl alcohol. They should be able to dissolve the ink just fine.
SSH MK I've used rubbing alcohol before. It works, but the faster you hit it with alcohol, the easier it comes off. If it doesn't work at first, I'd brute force it, and make a puddle and let it soak for a few minutes. And then even scrub it a bit with something abrasive or non-abrasive.
EEVblog Sometimes, literally using a rubber eraser will take it off. I'm not even joking.
Methyl hydrate is the best for cleaning marker and residue off of things.
to remove the permanent marker, use some pure Ethanol, or rubbing alcohol as you may call it, we use it in the Lab all day to remove our markings on the Tubes before we stick them in the dishwasher
Not all 9V batteries use "AAAA" cells. Some use small flat cells that are stacked. You can tell what batteries use what configuration by their part number 6LF22= FLAT STACKED CELLS, 6LR22= "AAAA" CELLS, The key is in the part number. 6L"F"22 F= flat cells and 6L"R"22 R= round cells or "AAAA"
Tak konecne sa tu nasiel aj nejaky iny divak zo Slovenska! Pozdravujem Jozefa Liptáka z TUKE. So finally there is another fan from Slovakia. Hi!
myslím že nás je viac :)
Robo Kupka
ale nevidel som este nikdy, ze by niekto poslal nieco zo Slovenska. Ale je pravda, ze ked Dave predaval to jeho pravitko uruler tak som videl, ze to posielal asi 20 ludom na Slovensku.
ElectroUniverse je nas tu naozaj viacej :D
d-_-b Ďakujem za pozdrav ElectroUniverse ! Popravde som vlastne chcel zistiť, či niekto z SK tiež sleduje EEVblog, hh. POVEDLO SE!
Yes, there is a another fan from Slovakia ;)
hele co byla ta součástka na tom tvrdým papíře?
I've made a digital speedo for my holden because the mechanical one is non-linear and a good 10k out on the upper end. my one does km/h and takes the sense from the back of the speedo, there is a reed switch on the rotating side which coincides with the wheel rotation. the speedo is within 2 - 3 k of my GPS and some small improvements may make that better and with a small code change I can get it to do miles per hour
Hi Dave, this coating is probably the result of using Nextel paint. Really interesting thing. Best regards, Peter
Stains get me very nervous and also i feel helpless. I can get very manic about stains :) btw a sharpie stain is not a real problem in the end.
Good episode!
I love how you you encourage your younger fans to get into electronics
I bought that Cypress BLE devkit and the demo firmware doesn't advertise on BLE for very long before going to sleep, maybe 30 seconds to a minute. One of the buttons wakes it up.
My initial reaction is to use a little bit of nail polish remover or diluted acetone, and rub it on the mat. However, that could rub away some of the material on top.
I believe the matt textured plastic coating is called "Senosoft".
Aww Dave you were very polite about the ''diy phone charger'' lol
To make the calender, use the violet LED "laser cutter" from Banggood on a photo-etchresist single sided board! ;)
Will the poor scope ever be right side up again?
Dave, use a colourless blender pen to get the permanent marker off. They work a treat. I sell second-hand games for a living, and these things can get texta off of cartridges that has been on there for 20 years.
It'll cost you $7 from Riot art and Craft. They look exactly like a normal marker but there is no dye in them - only the solvent.
You can clean the anti static mat with methylated spirits or isopropyl alcohol we used to do it years ago in the computer factory.
Use some de-natured alochol to get rid of the marker stains. Works 100% of the time
Well FemtoCow, it was certainly worth you sending in your goods to Dave, as now I want a back-lit calendar and some smd trays :)
I don't like alcohol that much for cleaning, plus IPA is expensive. Its dry and aggressive. But if you want it to be oil free, ok.
Usually I just try some white gas/lighter fluid first. Works a charm on PCB, tools, hardware parts etc. If that don't work then maybe either some alcohol or naphta, or something more aggressive (acetone, thinner).
EEVblog I normally just rub the surface with a rubber to remove permanent marker, but it might just lead to the rubber making a big smudge if you get the wrong type or the wrong surface.
I think that velvety feeling plastic on that USB hub is often referred to as "rubberized plastic", or at least that's what I've heard it called and know it as. I think I've got at least one USB flash drive kicking around somewhere with that type of finish.
The 4 port hub finish is ALSA paints SoftTouch paint... or more likely, a clone of it
I'm gonna miss radio shack. I don't like to buy parts online, even though it's so much cheaper, there's just something satisfying about being able to pick up what you're looking at and physically inspect the part before buying it.
Guess I'll have to get my 74xx and 2Nxxxxs somewhere else now.
U feel like I should mention that I remember someone on eBay shipping a camera in an envelope.
Hilarity ensued.
Uh, I don't know about 9v batteries not being able to supply 1a, and 9v I have drop out around 6v anyway, but yeah, that's quite a bit of power not used between 7v and 6v. I have blown 11a fuses in multimeters testing the internal resistance of 9v before, going off the amps delivered on dead short. I guess it depends on the battery.
"Soft feel" is the term I heard a lot for that molded-in texture on the USB hub.
Does ANYONE know how to get this BTTF Speedo? Ive been trying since 2009 to buy it from their site(s).
The Schematics and Gerbers arent avaiable on their blog and theres no shop to buy it from.
Yes i would like to know. Ive been trying for AGES
Hand sanitizer can remove the marker. I use it all the time when I get marker or pen on stuff.
+ EEVblog Dave use aftershave to remove the permeant marker of the ESD mat
I use to love to go to the radio shack. They've been gone from where I live for over a decade.
Lol Memphis is a city, ME=Maine. I had never considered what a bad idea using a 9V battery to power a 5V regulator would be. So many examples on the internets showing just that. Anyway good episode, so funny hearing you gripe about the recycled paper padded envelopes.
9V battery to 5V linear regulator still works.... Just not as efficiently as a switch mode regulator.
Gday Dave,
If you need to clean that permanent marker of your bench theres a product called "Orange Power" made by Planet Ark. They sell it in the supermarkets as a air freshener, but you can use it as a cleaner. My wife works in a supermarket and uses this product to clean the benches at the checkouts with this stuff. I've tried it and it works a treat. cheers
Isopropyl will take off those pen marks without damaging the rubber mat. Don't use acetone!
Once I get a job under university, I will drop a few bucks to send in a bag of old tesla stuff. There are electrolitic caps that are still spot on even after like 40 years :D
Was that the right link to the GPS based Back To The Future speedometer display?
Radio Shack near me is still open just picked up a Soldering iron from there yesterday in California
So much hate on the dso quad.
I use it almost every day to diagnose automotive electronics.
Works fine and saves time.
you can get it off the mat with hair spray or dry erase marker
You do better at knowing your US States and major cities better than 90% of the people that live here Dave. No Worries!
try one of those alcohol screen wipes on the ESD mat.
Use a bit of rubbing alcohol. Ethanol or isopropanol will both do the trick
We have a scale at work that can scale up to 120,000 lbs, and it works on the same principle as that little strain gauge. Pretty neat.
That scope still upside down I see
use some alcohol to get rid of the permanent marker
dry erase marker over the permanent then wipe off presto
not sure if it works on an antistatic mat, but some rubbing alcohol might work.
i've cleaned mine that way after an opps or 2
Jason Deadman Nope, doesn't work.
EEVblog
Petrol
In the automotive industry we use naptha as adhesive/glue remover. Commonly zippo lighter fluid, works wonders getting off permanent marker.
Hi Dave, you would always write "Dave CAD" on your white board when you drew Schematic Diagrams for us.
These textures become sticky from sunlight. It's best to clean them off with alcohol.
My favorite segment is when Dave is repairing or hacking some stuff. Remember those?
I wonder. When do the cows come home? A rough date would be enough for me. And what's the right angle to hold my tongue at for various tasks? Is it the same every time? Is there a way to calculate that? And who is flyn who apparently gets into everything?
How long will that ociliscope stay upside down for on the shelf.
If you visit Cross club in Prague you will find alot of Tesla components on the walls :)
or use isopropyl or stuff you clean your PCBs with after soldering :)
That GPS speedometer would be awesome if built with nixies!
you can clean the marker stains with scissors
The link for the BTTF speedometer goes to a racing blog that doesn't appear to have any mention of the product anywhere. Is that the right link?
Ok. Looks like this is it. adventcontrols.co.uk/bttf.htm
Hi Dave, Why did that guy turn your meter upside-down last week, and why haven't you put it the right way up yet?
Letting the magic smoke out is the best way to learn 👍
I always like to see mailbag videos even the old ones. I like the geocache one. I just maked a similar cache. But maybe i could copy the nice logo.
When i worked in crane repair i would find those strain gauges stuck all over the place, they were basically a throw away item so the engineers would not even bother to remove them after testing, LOL
When all else fails, read the instructions!
I got one of those radio shack shirts too. I think they were originally meant to be employee shirts. They literally sold the shelfs off the walls :(
HaxtorMoogle
The guys at the RS near me said that their store is not closing. It may be privately owned.
Love the show. Would love to see a tear down of the original Game Boy you got a while back!