ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Are Bike Spokes The Most Important Factor To Your Riding?!
ฝัง
- เผยแพร่เมื่อ 20 มิ.ย. 2023
- In today's video we have everything you need to know about one of the post important parts on your bike. Spokes come in high-tensile steel, aluminum, titanium and come in the double butted, single butted, 12, 14 and even 16 gauge. Phu from EPIC ( / _epicbmx ) gives you a rundown on all of the important details that can make a huge different on your BMX bike.
#Spokes #BikeSpokes #bmx
For more BMX Tech videos browse our Tech Thursday playlist:
• Mind Blowing Facts Abo...
For more BMX How To: videos browse our How To Tuesday playlist:
• How To Bunnyhop Any BM...
Join this channel to get access to perks:
/ @alfredomancuso
Thanks for taking the time to watch my content! If there's anything you'd like to see, please let me know in the comments, and if you can, don't forget to drop a like!
/ alfredomancuso
/ alfredomancuso
/ alfredo.mancuso
Shout out to the squad 🫡
Gang gang!!!
I think that the entire bike is important, but most important is this channel with the awesome content. 🤘
We appreciate that! Thanks for the positivity!
Hi there Phu.
Double butted spokes were not designed around being a lighter spoke, the butting serves a purpose.
Plain gauge spokes are very rigid and push all their force under use to either the hub or nipple/rim end, which can crack your hub flange or sheer off at the nipple end, the idea behind double butted spokes is they are thinner in the middle and more able to flex and soak up the forces that may cause more expensive damage elsewhere.👍
Professor Phu can’t be wrong !
I’m over 200lbs and I’ve never had any problems with butted spokes. Dirt. Street. Park. Well worth the extra cost.
Good to know 🙌🏻
From a physics standpoint tension is greatest at the ends of whatever things tension is being put on (rope, cable, rod). If the tensioned thing is vertical the tension will be greater at the highest point, if it is horizontal it will be equally great at both ends. Either way the point of least tension is in the middle. You see this same effect in tow ropes and other things that snap under high tension. It happens a the ends, not in the middle (unless there was some sort of defect or damage elsewhere in the length).
Also, on Ti snapping. As a general rule of thumb, the harder something is, the more brittle it is. Hard/strong brittle things snap, softer/weaker things bend and flex. Most people have probably bent a piece of metal back and forth until it snaps off. This is called fatiguing, the softer the metal the easier it is to bend, but the more times you have to bend it to fatigue it enough to break off. Moral to the story is that if you are putting a material in an environment where it needs to flex and be super strong such as a bike rim, you want something that is a happy medium in the hardness scale you select. Stainless steel is an alloy, and the mix can change the hardness. There are ways to determine what the optimal hardness level is for a given application at a set tension, and it appears that Odyssey has gone through that effort ...
Odyssey has gone through that effort? 😮
Personally, Titanium Spoke are very good, the bike feels very soft, I have never broken one, I have been using them for 3 years, it all depends on your riding style.
This video hits home first day riding after maybe a year I broke my spoke, old spoke a bit rusty had wheel relaced with stainless spkes
You guys just saved me a ton of money 💰 😅! I was going to build a set with Ti for the first time. I have run Sapim double butted and had no issue and DT Swiss . But that’s more common for 14” up I’m running a 26” street Mtb
Love to hear that!
Slick jokes with slick Phu comin at you!
I’d be down to watch a 15-20min vid on the Phu/Epic beginnings. Shiii…maybe even a lil series and some highlights from the boys thrown in from over the years 🤔
I know that’ll take a min to put together but I’d watch it for the BMX culture 💪
Also, another “real street bmx” bike check would be dope 😂🍻
Lacing a wheel with spokes is only as good as the installer. There's a whole technique to lacing, and without this learned attribute, the wheel has a high chance for catastrophic failure... That's where a quality shop comes into play to get it done right the first time . Thanks for the upload learned alot
Very good point!
Yo fella$ hot topic! I’m shopping for spokes recently and discovered the spoke calculator. Had no clue some rims take different size spokes, and depending how big is the flange on the hub would vary the size of that side spoke. Great show Phu and Al.
The biggest advancement in spoked wheels is the cross-lacing design on G Sport rims and BSD Nasa rims. It's equivalent to increasing your hub flange width by 1 CM or half inch. Super strong design.
Would love to hear more about rotational weight and new rim tech / materials. These videos are perfect, the minutia of BMX is theraputic. Cheers!
Wow thanks for the video, It helps me a lot 👍👍👍👍👍👍👍
0:43 Double butted, spokes, always snap on the butt get 14 gauge stainless steel spokes 👍🚲💨
After building wheels for 40+ years all of my and customers wheels are built with DTs unless someone brings spokes to me and insist I build with them. For 20-24 inch wheels DT 14g is the standard. Rolled threads are best.
Great information! Love this…
Thank you man for talking about this I have alienation felon and deviant laced with all ti spokes to a profile totem hub I'm a little dude and I just do basic bmx tricks not like jumping off roofs n shit..I was wondering so much about them because I've never had a bike with em so big thanks to u man..I'll be ordering some ti crank bolts here shortly from yall..keep talking man your the inly bmxer that I can understand what u teach so thanks fam alot!!
I wanna give a shout out the the Casey family. Thoughts and prayers to you, im truly sorry for your loss.
🫶🏻🙏🏻
Good take!! Never considered this before
Glad we could share some insight :)
Thanks
Why no 4130 cromo spokes?
very nice video 👏
Sapim Double butted spokes will never let you down! But I have broken some from having them too tight.
Any EPIC BMX merch available?? I really enjoy these videos! 😎
Could you review/talk about string spokes 🙂
Is the 14 gauge double butted stronger then 12guage spokes for my ebike. Keep popping spokes need advice on wat spoke is strongest?
Should find out about the Berd Spokes
So what is a good tension and how to check?
Every time the temperature changes here my spokes make noises and get loose. I'm always afraid to put to much tension on it so I just put as little as possible on to stop the noise.
Never used them always bought the 14g spokes I never seen the used for them I always thought of them for racing Bmx but never freestyle Bmx
I also still wanna see those berd spokes not sure if I'm spelling it right.
Butted spokes and alloy nipples are lighter then titanium spokes.
Further more. Butted spokes can be stronger then regular spokes.
On the subject of spokes how do you know what size spokes you need because there's different hubs out there, how do you measure?
There’s a few websites you can google that will give you the measurement if you submit some information
boss ask lng po ano po size ng bladed spokes png ksyrium wheelset
hey Alfredo I have a heavens gate Rame bar folks seat I have money to buy the rest of the parts can I pull up to the store & help me choose my parts and assemble it ?
"he likes budlight" 😂😂😂
Couple of my spokes are bent very sharply so I can’t bend it back perfectly, it’s wavy, is it ok👌I trued them afterwards
💯🙌🏻
Some people still believe that titanium is the holy grail of metals for bmx, and they would like to have a 'titanium-everything' bike. With today's parts designs, titanium is totally unnecessary, I could say almost 'obsolete'. I've compared aluminium and titanium parts over the years, and some newly design parts were even lighter in aluminium than Ti, at the very least the same weight, or the weight difference is negligible. So if you're going for weight difference, why pay double, sometimes quadruple the price to lose 1/2 oz? The only Ti part I would give it a try is a crank axle.
so thats how
Do Ethan exploded these carbon rims?
Do y’all cut & thread your of your spokes Manually with a cutter or do you have a machine to do it??? I think, titanium, exposure, overrated for Park & Street if you got the money that’s fine. And carbon fiber rims are just a whole different aspect. As far as I would go is titanium spindles are pegs are Bar end’s. He’s a ride about breaking spokes with titanium. And I hate it working and trying to true titanium spokes. Specially, if they’re at that point.
Yeah as a machinist, titanium isn’t as malleable as stainless , it will just snap instead of bend
why no chromoly spokes?
What about them vegan hemp spokes
🤔
420 gauge
Honestly just feel like the spokes are to tight why would they blow out on max doing a skid but not on the pro's?