How To Use A Hydraulic Press The Right Way

Caddy Daddy has received quite a few questions about how to use a hydraulic press properly so that the product you are working with doesn’t get damaged. We received a part from a customer that was damaged and it appears they did not use their press correctly, so in this video we will show you how to properly remove a bearing from a housing using the correct method. We will also show you how to press in a bearing, so everything fits perfectly and nothing is harmed in the process. We hope this helps a lot of you viewers out there, so you can prevent any further damages to your automotive parts.
If you have any questions, please let us know in the comments section below.
Visit the Vine Village website here - vinevillage.org
You can DONATE to Vine Village here - bit.ly/VVDonation
-
MUSIC -
"Swamp Jam"
Written by Dreamlamp
"Baião Baião"
Written by Hola Hola
"Bid Kid Now"
Written by Dresden, The Flamingo
"In The House"
Written by Jonny Avery
-
STAY TUNED FOR MORE EPISODES FROM CADDY DADDY PRESENTS
VISIT US ON THE WEB AT caddydaddypresents.com/
-
SUBSCRIBE TO OUR CHANNEL HERE -
th-cam.com/users/caddydaddy?su...
-
SHOP FOR CADILLAC PARTS -
www.caddydaddy.com
-
SOCIAL MEDIA -
FACEBOOK - / caddydaddyvintagecadillac
INSTAGRAM - / caddydaddyvintageparts
TWITTER - / caddydaddyvc

[@LairdKrug]

I just bought a 10-ton press for leather work and have never used a tool like this. Thanks for sharing; it showed me some safety considerations!

[@Caddydaddy]

Glad you found the video helpful. Remember to always keep thing centered
on the ram and evenly supported; that will prevent a lot of accidents. Josh

[@Caddydaddy]

Thanks. As long as you pay close attention to where force is applied, and you take it easy, you'll do fine. If things don't seem right, stop and re-evaluate the job. Josh

[@ppstonesanchez1590]

I´m learning to use an hydraulic press and your video has been very useful to me, thanks a lot!

[@pauldunne2407]

Very good detailed tutorial. Thank you.

[@johncoyle4125]

Thanks for watching and glad you enjoyed it! Josh

[@justinbyers3431]

Thank you for all the videos you guys make! Very helpful. (We had difficulty installing the bearing in the carrier housing on our 61)

[@Caddydaddy]

We are always happy to help everyone out with their projects. Glad to see this video helped you out and there are many more to come, so stay tuned! Thanks again!

[@31acruz]

Nice job.

[@unclesamsniece2064]

Great video. Really good info that gets right to the point. Keep it up!

[@Caddydaddy]

Thank you!

[@naheedahmed8080]

Sir I want to make a pellets os graphene how much time is required for it