I'm confused with Galaxy S21 and S20fe5G, because S20fe5G comes with charger if I go with s21 I need to buy charger and there's a lot of 'Bad feedback on battery performance of S21. So I will go on s20 Fe 5G since MKBHD choose it to be the 'Phone of the year 2020' I wish I made a great decision.
@@em-sydrill4119 ı use the Snapdragon s20fe without 5g , youll need to buy a cable and a charger anyways, phone supports 25w charging but the box includes only a 15w charger. The phone it awesome tho
Thank you. It can be any of those gold circle points on the motherboard but not sure which. Most likely the ones near the connectors for the flex cables by the lower portion of the mother board.
What is the red dot below the led light? I couldn't figure out what it was even after looking at what was underneath it after you opened it? Just got this phone so just curious what it does lol
This phone is the safest phone, i never seen any sudden death case on Internet. Unlike it's older brother x3 pro and many others xiaomi phone will likely to sudden death.
I'm not able to follow but where is the main chip where heat most ? I have poco x3 gt and i want to put fancooler to my phone but in my experience the phone heats more in the main cam? And i am worried if i put fancooler in the main cam bcuz the moisture of the cooler might get in in the cam or in the phone....
The processor is on the back of the board, so would be seated behind the upper portion of the screen. Other components can heat up as well but keep in mind just because you feel some heat, doesn't mean it's overheating. The phones are designed to exhaust the heat from the inside out.
@PBKreviews do you think a pixel 4a 5g could survive at the bottom of a lake? i dropped it in the park in a lake thats 3,5m deep. i had airpods connected and i heard the disconnect sound in 2 seconds after going in, could the phone have some kind of water sensor that made it turn off before it got damaged? i know it has a rain sensor that stops charging when its wet. its a city park and i'd have to go swimming for it, could it work if i get it back and let it dry for a week or something?
No it probably wont survive. Even "water proof" phones have a rating of say like 30 min or so that would survive being submerged. If its been there more than an hour, I highly doubt it would work and water most likely has gotten inside the phone by now.
The blue and orange POCO X3 GT's got a plastic back I think, the black/white variant I got is using a gorilla glass victius backglass, I don't know why POCO had to do this :/
Thanks. Aside from the 4k footage from the video, I dont have any other high res picture from it and I don't have the phone anymore to take any picture.
It was on the back of the phone, not sure why it's not in the video. I must have accidentally cut out the part where I flip over the board and show the back.
You can see the copper vapor chamber or the liquid cooling they refer to @5:10 in the video. Also the materials seem to be good and should last a good while. I would prefer an all aluminum uni body housing, but this is still not bad and is strong.
@@PBKreviewsHi, thanks for the reply. wow! 😮 No wonder it does not heat as much even in long gaming sessions. It's simply amazing. How about its plastic frame? will it compromise longevity? Or will it hold up in time? P.S. I came from phones with metal frame
@@PBKreviews OK thank you actually, the reason I asked for your channel is when you took a video of the phone for this reason, I asked you to pull it from the channel so that it is more enlightened and clearer.
I do it to show people how to fix or repair their phones and for people who want to see the build of the phone before they buy to see how easy it is to repair or how well built it is etc. Plus yes as the previous person mentioned, I don't destroy it. I put it back together and its a working phone which I resell as a disassembled phone to recoup costs for future phones.
Base on materials, will it lasts?
Is there any longevity issues?
Compromises in build?
thanks
This is exactly what a teardown should be.
Thank you for providing such great information.
I loved all your videos. It helps me to discover their internal components and decide which phone to purchase.
Great channel, man! I actually learn a whole lot.
Thank you!
I'm surprised it has an X-axis vibration motor. Most phones in this price range have a cheaper Z-axis (circular) one.
Yea, I was also surprised.
Tbh, since day 1 I never turned it off. 😁 It is just so satisfying to use in every interaction.
@@kodaph 👍
@@kodaph me too man.. It feel good unlike my Vivo V15... Same price vivo V15 6-128(release) and X3GT 8-256(release)..
can i ask some think what kind of glue u use to stick it back the back cover of that phone?
th-cam.com/video/T4iiPUIM7-Y/w-d-xo.html
Watching this video using my Poco X3 GT
:) You're welcome
Necesitó Pegamento para volver a pegar la tapa trasera o Simplemente se coloca y ya?
A littlebit glue is needed.
PBKreviews which one should I go, Galaxy S21 or Galaxy s20 Fe 5g? Which one is better?
I would go with the S21.
5g s20fe always uses Snapdragon. If the s21 is exynos go with the 5g Snapdragon
I'm confused with Galaxy S21 and S20fe5G, because S20fe5G comes with charger if I go with s21 I need to buy charger and there's a lot of 'Bad feedback on battery performance of S21. So I will go on s20 Fe 5G since MKBHD choose it to be the 'Phone of the year 2020' I wish I made a great decision.
@@em-sydrill4119 ı use the Snapdragon s20fe without 5g , youll need to buy a cable and a charger anyways, phone supports 25w charging but the box includes only a 15w charger. The phone it awesome tho
S21 of course enough of discussion
great content. very helpful. i'd like to ask if you know where the edl test points are?
Thank you. It can be any of those gold circle points on the motherboard but not sure which. Most likely the ones near the connectors for the flex cables by the lower portion of the mother board.
What is the red dot below the led light? I couldn't figure out what it was even after looking at what was underneath it after you opened it? Just got this phone so just curious what it does lol
Rondu
You are cool and accurate. Thanks for your work!
Thank you and you're welcome 👍😀
Hello do you know that is the model of the power ic of poco x3 gt?
What's that black on the back of the phone when you opened it the first time
This phone is the safest phone, i never seen any sudden death case on Internet. Unlike it's older brother x3 pro and many others xiaomi phone will likely to sudden death.
👍
Did you decide to buy this phone buddy?
Hi, I am here again, what adhesive to use to stick again the LCD to the frame? It just come off on its own for unknown reason
For the screen i'm not too sure but I think you can use A130 Structural Adhesive
Look like low cheap Chinese tablet lol. I'm using this phone right now. Still good for gaming.
02:49 do you put thermal paste under it?
It came with thermal paste from the factory. I didn't put it on myself if that is what you're asking.
I just found out that the back part of my phone has a graphene foam pad. Though, which side will expel heat more? The front or the back?
not sure what you mean, but for installation of that pad, there is pretty much only one way to install it from the way it has the cut out.
I subscribe because im looking for this tutorial disassembly.
I'm not able to follow but where is the main chip where heat most ? I have poco x3 gt and i want to put fancooler to my phone but in my experience the phone heats more in the main cam? And i am worried if i put fancooler in the main cam bcuz the moisture of the cooler might get in in the cam or in the phone....
The processor is on the back of the board, so would be seated behind the upper portion of the screen. Other components can heat up as well but keep in mind just because you feel some heat, doesn't mean it's overheating. The phones are designed to exhaust the heat from the inside out.
@PBKreviews do you think a pixel 4a 5g could survive at the bottom of a lake? i dropped it in the park in a lake thats 3,5m deep. i had airpods connected and i heard the disconnect sound in 2 seconds after going in, could the phone have some kind of water sensor that made it turn off before it got damaged? i know it has a rain sensor that stops charging when its wet. its a city park and i'd have to go swimming for it, could it work if i get it back and let it dry for a week or something?
No it probably wont survive. Even "water proof" phones have a rating of say like 30 min or so that would survive being submerged. If its been there more than an hour, I highly doubt it would work and water most likely has gotten inside the phone by now.
What are the 2 tiny dots beside the 3 camera lens? The red and black dot?
I believe that is the AF (auto focus) sensor.
@@PBKreviews thank you ive been looking for answers everywhere they never mentioned this.
@@ReaverVandalomg yesss I found a comment that mentions it lmaooo
@@fizzywizzylemonsqueezy1774 Shut man no one cares
Using the exact blye colour model to watch the video
Gracias
you're welcome
Is there any way to dissemble only the front screen and clean the wet/moist lcd digitizer?
The screen and glass are fused or glued together so prying it off would damage it.
My X3 GT just got 3 of 4 sides of the screen detached from the rest, is there any way to solve this?
The blue and orange POCO X3 GT's got a plastic back I think, the black/white variant I got is using a gorilla glass victius backglass, I don't know why POCO had to do this :/
oh I see, its possible.
Exactly
Sir what brand is speaker installed on poco x3 GT?
I'm not sure if the speakers are Dolby or not but the phone has a Dolby Atmos setup
Nice video sir, do you have a hi res picture of the tear down of the poco x3 gt
Thanks. Aside from the 4k footage from the video, I dont have any other high res picture from it and I don't have the phone anymore to take any picture.
What material was used in mid frame?
The midframe is an aluminum alloy with plastic boarder.
@@PBKreviews ok sir thank you for the information
@@freshlemonades9312 you're welcome
Good afternoon, could you tell me a test point for poco x3 gt ?!
Hi, not sure where the test points are.
What is the battery code
Btw what's the role of graphene film in that phone?
Helps to transfer heat
@@PBKreviews thanks, by the way what the difference between graphite film and graphine film?
My screen got off. How should i glue it?
Here is a link: th-cam.com/video/T4iiPUIM7-Y/w-d-xo.html
Good job 👍❤️
Thanks!
my poco phone likes to touch 50°C while playing games, I'm confused what should I fix on my phone, even though the game size is light
Get a phone cooler
احسنت مشكور
Thanks! :)
ty
You're welcome
Wheres the mediatek dimensity is?
It was on the back of the phone, not sure why it's not in the video. I must have accidentally cut out the part where I flip over the board and show the back.
X3 GT no Heat Pipe?
It has a copper vapor chamber which is shown @5:08 in the video.
Where could be the liquid cooling 2.0 there?
You can see the copper vapor chamber or the liquid cooling they refer to @5:10 in the video. Also the materials seem to be good and should last a good while. I would prefer an all aluminum uni body housing, but this is still not bad and is strong.
@@PBKreviewsHi, thanks for the reply. wow! 😮 No wonder it does not heat as much even in long gaming sessions. It's simply amazing.
How about its plastic frame? will it compromise longevity? Or will it hold up in time?
P.S. I came from phones with metal frame
plz test draine battery
Nice
Thanks!
X3 gt ✌✌✌👍👍👍
Alguien que tenga el poco x3 GT tiene problemas con el sensor de próximidad?
i like video
I don't see any liquid cooling system thingy
The copper vapor chamber @5:08 in the video is what they refer to as the liquid cooling.
Ahh i see, yeah i figured some "liquid" cooling system like what a pc would have would be too much for a smartphone's small chambers. Thanks!
cool man !
👍
i thought this x3 gt has a liquid cooling man hahaha
@@dioliverbalanza6522 it does, the copper vapor chamber is the liquid cooling 😀
@@PBKreviews nice thanks bro. And more power to your channel.
@@dioliverbalanza6522 thanks! 😀
Where the liquid cooling?
You can see the copper vapor chamber @5:09 in the video. Has liquid vapors inside it.
where is nfc?
@1:37 in the video.
I thought this is liquid cool 2.0
Why isn't has a copper pipe?😭
It has a copper vapor chamber, I would prefer the vapor chamber over the pipe.
@@PBKreviews oh wow thanks!
But sir,where is it located?
I can't seem to find it on ur video
@@ershadelmaco32 you can see it @5:09 in the video
@@PBKreviews oh im very sorry 😅
Thank you!
@@ershadelmaco32 no problem :)
👍⭐⭐⭐⭐⭐
GJ🌹
Thank you!
Poco M3 pro 5g disassembly teardown repair
Hi, there are already a few videos on that or else I would have done it.
@@PBKreviews
OK thank you
actually, the reason I asked for your channel is when you took a video of the phone
for this reason, I asked you to pull it from the channel so that it is more enlightened and clearer.
xiaomi poco x3 gt modo edl mode ? photo
Not sure what you mean
Poco X3 GT test point help!
I'm not sure where the test points are.
Nyek 6hours late 🤣😅
haha :)
No cooling system💀
but this model less issue hahahah😂
@@Sabishi-vz8dl nope still overheating yet, that's is user
why you do this we have no money to buy why you dishtroy if its available and runing phone then you send me if you have lots of phones or money...
He didn't destroy anything. 🤔
I do it to show people how to fix or repair their phones and for people who want to see the build of the phone before they buy to see how easy it is to repair or how well built it is etc. Plus yes as the previous person mentioned, I don't destroy it. I put it back together and its a working phone which I resell as a disassembled phone to recoup costs for future phones.