The first 1,000 people to use this link will get a 1 month free trial of Skillshare: skl.sh/juliusperdanapaperreplikarcprojects09211 Playlist : 00:00 Maiden Flight 05:41 Design 08:34 Fuselage 16:42 Wings 23:49 Install The Wing 26:46 Stabilizer 28:01 Fuselage Part 2 28:55 Covering 35:31 Control Surfaces 37:34 Cockpit 39:48 Detailing I haven't update my site - Email to juliusperdanapr@gmail.com to request for plans
You know what would be great? If at least 5000 of us get 1 new subscriber for this channel, as a big THANK YOU. Let's get him to his 50k goal. I think that's a simple request. right guys?
Hi Julius. First of all thank you for the hard work that you put into your aircraft models and plans. Without your work I don’t think I would have come out of the last tree lock downs here in the UK sane. Covid still hanging around and winter is fast approaching, and now seeing your P-47 build it has to be my first project of the winter.
I had a hard time thinking about how to make a clean looking and reliable detachable wing - your idea is ingenious, I'm sure going to use it in my future builds :) I plan on making P-47D (bubble canopy version)
Hi Julius, This is an amazing tutorial, plans and build, thank you! There are so many tips and tricks that you've demonstrated here, and the final build looks gorgeous on the ground and in the air!! Thanks again!
It’s challenging to make a flyable model and you learn a lot and it is worth it even rc plane and heli designers and builders are practicing the study of aeronautical engineers.
amazing!! I was following all buildings updates in the youtube community panel i was really eager to see the building of this amazing RC plane! Congratulations !
Thank you! Thank you! Thank you, Pak, for keeping the video correct length! With all build-steps! Thank you! After this, i don't know what to say! No words! Mind-blowing, Kaptain Jenius! Amazing! I have watched your build videos hundreds of times, and still i am amazed! Fantastic! Few questions pls: 1. Does the bldc motor not go bad if water falls on it (during wet sanding)? 2. How do you prevent wrinkles while ironing the laminated sheet onto the Depron? 3. How does the laminated film stick to Depron even after painting it??? 4. If you use the iron without the sock/cover/cloth, doesn't it stick to the lamination film plastic? 5. My heat gun causes the foam to melt, even on low setting. Any advice? 6. Pls suggest some good noodle recipe, because all long strings of glue keep coming out from the glue gun! (Lol!) Pls consider a Hawker Hunter, even if it is pusher-propeller driven. One of the bestest aircraft ever built. All our best regards from India.
1. no, brushless is waterproof 2. pull the film while ironing 3. it's still stick 4. no it's not 5. use low-medium setting or distance your foam 6. look for taiwan-made glue stick
@@JuliusPerdana thank you Pak! I made my first (independent) model HJT 16, Kiran Mk2. Pls see it on R. G. Bamboat channel. Not completed still, though.
Hello friend as always your work is amazing and inspiring, congratulations any time I will venture to follow one of your models for my grandson, you are an amazing artist, thank you for sharing, hugs from your admirer here in Brazil.
Ciao Giulio, da un pò sto guardando con molto interesse i tuoi video e posso dire che sei un gran maestro della costruzione dinamica, quello che noto è la difficoltà nel dare il giusto assetto in fase di atterraggio.Secondo la mia esperienza nel campo aeromodelli per avere più stabilità con questi modelli come anche nei trainer ad ala alta è meglio posizionare la batteria sul fondo della fusoliera anzichè sulla parte alta per evitare l'effetto pendolo e poi un motore con qualche giro/volt in più ti aiuterebbe ulteriormente. Bravo!
The Tucano makes the Brazilian plane, it is a beautiful trainer plane and one of our squadron of smoke. (Faz o Tucano o avião brasileiro ele é um lindo avião trenador e da nossa esquadrilha da fumaça.)
@@amilcarrossi6293 Obrigado, vi isso hoje com o seu comentário. E estou mais apaixonado pela avião brasileira. Fazia aeromodelo e miniatura para presentear amigo. Estou o momento parado assim que eu voltar a trabalhar vou fazer uma miniatura do Super Tucano e lhe dar em gratidão a sua rica informação e ele vai com o Prefixos do seu nome e número da sua escolha.
Excellent again - love all of your models. If you have another pole please include the DHC-1 Chipmunk, I would love one of these made with you techniques. Keep up the great work.
Great build, just one historical inaccuracy. The black bars on the wing havr to be closer to the wing root. They were the part of identification marks for the 1944 D Day landings in WW2. Any period photo would give you the idea. Cheers!
Great work as always Julius!! I’m sure you get a lot of requests, how about building a Piaggio Avanti P180 and can’t wait to see the finished 747 as well. Keep up the great work..
Hey Julius!, such a great surprise that mention! but very bad of me don´t watch the video early. Thanks a lot and we can make some scratchbuild togheter maybe! (at distance! :P ) You become a trademark for scratchbuilded planes. Here everyone loves you! hehe
hey I’m building this now without gear and a smaller motor. It’s 2826 930kv with 10x4.5 2-blade prop. Think it’ll cut it with maybe a 50a esc and 4s 100c?
Dear sir. I think that your work its amazing but I have to tell you one thing. If the material that you uses is PVC or comes from PVC don't heat or burn it because its veeery toxic please check info on Google about that. If it is not dont worry. Thank you!
Om mau tanya, kalau semisal kita laminasi dulu baru semprot cat itu bisa nggak?. Atau dari segi apapun lebih baik mana semptor cat dulu baru laminasi atau laminasi dulu baru cat? Makasih om
mudah ngelupas nanti catnya, saya pake cara itu di mustang, hasilnya sama persis kalo kita ngecat di lakban bening, gampang rontok. Kalo yang cara di video ini kan saya catnya di bagian dalam, tempat lemnya bukan di luar
Hi Julius, great job, impressive. Where can I find the laminating film ? How should I search in GOOGLE ? What is the true name of this foil ? It looks very good. Best regards
this is one was not calculated, I just search the factory made model and adjust the scale and use that CG. And then make test flights to find the correct one for my model
Nice model, I already own one but I certainly reproduce this too. I understand Giulio well that you cannot satisfy all our requests ... But I will try anyway and I renew my A400M airbus in a giant scale like the 747. I would like to know if you would be willing to create it ... Thanks. Good job. A hug from Italy.
@@rosspainter8691 You should ask Julius, not me, I'm waiting for them too. It seems to me that you have to request them by sending an email to his address.
Sir, please tutorial on modeling in blender and making paper model .... Please so that we can build over custom planes. How to convert model to paper model using... Please sir..
The first 1,000 people to use this link will get a 1 month free trial of Skillshare: skl.sh/juliusperdanapaperreplikarcprojects09211
Playlist :
00:00 Maiden Flight
05:41 Design
08:34 Fuselage
16:42 Wings
23:49 Install The Wing
26:46 Stabilizer
28:01 Fuselage Part 2
28:55 Covering
35:31 Control Surfaces
37:34 Cockpit
39:48 Detailing
I haven't update my site - Email to juliusperdanapr@gmail.com to request for plans
whers the plans
@@rosspainter8691 email me
You know what would be great? If at least 5000 of us get 1 new subscriber for this channel, as a big THANK YOU. Let's get him to his 50k goal. I think that's a simple request. right guys?
Hi Julius.
First of all thank you for the hard work that you put into your aircraft models and plans.
Without your work I don’t think I would have come out of the last tree lock downs here in the UK sane.
Covid still hanging around and winter is fast approaching, and now seeing your P-47 build it has to be my first
project of the winter.
I had a hard time thinking about how to make a clean looking and reliable detachable wing - your idea is ingenious, I'm sure going to use it in my future builds :) I plan on making P-47D (bubble canopy version)
Hi Julius,
This is an amazing tutorial, plans and build, thank you!
There are so many tips and tricks that you've demonstrated here, and the final build looks gorgeous on the ground and in the air!!
Thanks again!
Killing it!!! Man, you're getting better every build. Bravo.
thank you for your support
Amazing... you are a master of depron modelling..Congratulations ...
Thank you so much 😀
you are the true master builder of what i've seen from all your work, the 4 thumbs down i saw are just jealous ignorant mental challenge people
thank you for your support my friend
So amazing the scale you achieve with such basic materials. Your English is impeccable 👌
thanks :D
It’s challenging to make a flyable model and you learn a lot and it is worth it even rc plane and heli designers and builders are practicing the study of aeronautical engineers.
yes I learned from every projects, thanks
You hit bullseye again!
Very well done!
Now back to the Queen of the skies, the 747
yay
I really liked it, congratulations on the project.
Thank you very much!
amazing!!
I was following all buildings updates in the youtube community panel i was really eager to see the building of this amazing RC plane! Congratulations !
thanks
Awesome!!!! Congrats Julius! Perfect!
Thanks!!
Thank you! Thank you! Thank you, Pak, for keeping the video correct length! With all build-steps! Thank you!
After this, i don't know what to say! No words! Mind-blowing, Kaptain Jenius! Amazing! I have watched your build videos hundreds of times, and still i am amazed! Fantastic!
Few questions pls:
1. Does the bldc motor not go bad if water falls on it (during wet sanding)?
2. How do you prevent wrinkles while ironing the laminated sheet onto the Depron?
3. How does the laminated film stick to Depron even after painting it???
4. If you use the iron without the sock/cover/cloth, doesn't it stick to the lamination film plastic?
5. My heat gun causes the foam to melt, even on low setting. Any advice?
6. Pls suggest some good noodle recipe, because all long strings of glue keep coming out from the glue gun! (Lol!)
Pls consider a Hawker Hunter, even if it is pusher-propeller driven. One of the bestest aircraft ever built.
All our best regards from India.
1. no, brushless is waterproof
2. pull the film while ironing
3. it's still stick
4. no it's not
5. use low-medium setting or distance your foam
6. look for taiwan-made glue stick
@@JuliusPerdana thank you Pak! I made my first (independent) model HJT 16, Kiran Mk2. Pls see it on R. G. Bamboat channel. Not completed still, though.
Once again lovely build brother
Thanks for great planes and plans!
Hello friend as always your work is amazing and inspiring, congratulations any time I will venture to follow one of your models for my grandson, you are an amazing artist, thank you for sharing, hugs from your admirer here in Brazil.
Thank you very much!
Ciao Giulio, da un pò sto guardando con molto interesse i tuoi video e posso dire che sei un gran maestro della costruzione dinamica, quello che noto è la difficoltà nel dare il giusto assetto in fase di atterraggio.Secondo la mia esperienza nel campo aeromodelli per avere più stabilità con questi modelli come anche nei trainer ad ala alta è meglio posizionare la batteria sul fondo della fusoliera anzichè sulla parte alta per evitare l'effetto pendolo e poi un motore con qualche giro/volt in più ti aiuterebbe ulteriormente. Bravo!
good review, thanks
very good job Julius very nice plane I'm really looking forward to building the 747 Nice greetings from Germany
Many thanks! I will working on it tomorrow
The Tucano makes the Brazilian plane, it is a beautiful trainer plane and one of our squadron of smoke. (Faz o Tucano o avião brasileiro ele é um lindo avião trenador e da nossa esquadrilha da fumaça.)
Seria top se.ele fizesse o Super Tucano da FAB
@@maurosouza3494 Verdade seria muito bom mesmo.
O tucano não é trainer... é um caça muito util em varias modalides...
@@amilcarrossi6293 Obrigado, vi isso hoje com o seu comentário. E estou mais apaixonado pela avião brasileira. Fazia aeromodelo e miniatura para presentear amigo. Estou o momento parado assim que eu voltar a trabalhar vou fazer uma miniatura do Super Tucano e lhe dar em gratidão a sua rica informação e ele vai com o Prefixos do seu nome e número da sua escolha.
beautiful plane beautiful work Julius
Amazing builds as usual. I would love to see JF-17 or K8 build.
Excellent again - love all of your models. If you have another pole please include the DHC-1 Chipmunk, I would love one of these made with you techniques. Keep up the great work.
Great suggestion!
Beautiful work! Congratulations!
Thank you very much!
Tentu saja, sangat penting untuk menunjukkan bagaimana pesawat terbang. Ini menarik, bahkan mungkin lebih dari sekedar kreasi)
Fantastic build i asked for a p47 razorback ages ago and you done it 😎😎👌
Hope you like it!
@@JuliusPerdana have you got plans done for it
@@mickwalls1871 check description, email me for plans
Great build, just one historical inaccuracy.
The black bars on the wing havr to be closer to the wing root. They were the part of identification marks for the 1944 D Day landings in WW2.
Any period photo would give you the idea. Cheers!
no it's correct, google "P-47 Razorback Bonnie"
@@JuliusPerdana ah, yes my bad. It's the Philippines based squadron 460th of William Dunham. Should have known.
@@sudarshanpujari5503 I dont know it's based on Phillipines, I just know it's from pacific theater, thanks man
Belíssimo trabalho. Uma obra de arte!
Parabéns esse é o melhor vídeo que já assisti do.seu canal
wow keren mau coba bikin ah👍 jadi semangat klo lihat om jul build pesawat rc yang scale👍👍👍
Great work as always Julius!! I’m sure you get a lot of requests, how about building a Piaggio Avanti P180 and can’t wait to see the finished 747 as well. Keep up the great work..
it is scheduled on March 2022
please can you tell us what remote control you used? Its not in the specs list ...???
Hey Julius!, such a great surprise that mention! but very bad of me don´t watch the video early. Thanks a lot and we can make some scratchbuild togheter maybe! (at distance! :P ) You become a trademark for scratchbuilded planes. Here everyone loves you! hehe
yea, thanks a lot for the tip, and this technique become my favorite covering technique. I even bought a matte film for the F-16
@@JuliusPerdana ohh that will be cool. Also I want to try make some camouflage scheme with that technique.
the skill an talent you have sir i wish i could do this this sir is so fing cool pardon my french
thanks
como sempre, trabalho esmeroso e maravilhoso
Congratulations
very good work bro..
Thanks!
Welcome!
Amazing!
Very nice plan brother
Thanks
Kreatifitas tinggi ini...mas
terima kasih
Another beautiful project. I have one question. Does painting the underside of the covering take away from the adhesive properties of it?
no, it's still stick
Kelebihan dan kekurangan nya covering pake laminating film apa ya om?
Thanks
kelebihannya hasil akhir bagus, ringan. kekurangannya mudah lepas lemnya.
Nice ...guess I'll try building one, but I think maybe it will go to someone younger to fly. Free trial ...sounds good. Take care.
Luar biasa... reques
Coba terbang lurus jauh dlu baru belok om.. pasri seru nih.. 1 lagi reques sound asli.. pengen denger ngaungan propnya
sound asli? itu aslinya tanpa musik, memang ga ada bunyinya
@@JuliusPerdana owh.. gak ada bunyinya ya om.. pesawatnya senyap
hey I’m building this now without gear and a smaller motor. It’s 2826 930kv with 10x4.5 2-blade prop. Think it’ll cut it with maybe a 50a esc and 4s 100c?
yea you can use them
Mangstab om Julius!!!!!
Om jul mau tanya, ini laminating filmnya yang glossy atau yang doff ya?
glossy, doff juga bisa
should i add a gyro? And if so what control surfaces should i add it to?
no you don't have to, but if you have it would be a feat
Excelente aero amigo👍
Mantaaabbbb om jul🙏🏼🙏🏼
Good evening Julius will the plant be available in paperreplika ?
Email me, check email on description/ channel page
@@JuliusPerdana Grand Master Julius!!! Thank you very much, I already received the plans, your work is wonderful
Dear sir.
I think that your work its amazing but I have to tell you one thing.
If the material that you uses is PVC or comes from PVC don't heat or burn it because its veeery toxic please check info on Google about that. If it is not dont worry.
Thank you!
it's not PVC
@@JuliusPerdana better! What is the name of that plastic?
@@shagui which plastic? the main material is XPS foam
you did take-off in one direction and landing in the contrary direction. Are sure about the wind??
landing was the correct direction lol
wah telat nonton 😅😅mantap om lanjutkeun
request Skay Hunter om😁
Om mau tanya, kalau semisal kita laminasi dulu baru semprot cat itu bisa nggak?. Atau dari segi apapun lebih baik mana semptor cat dulu baru laminasi atau laminasi dulu baru cat? Makasih om
mudah ngelupas nanti catnya, saya pake cara itu di mustang, hasilnya sama persis kalo kita ngecat di lakban bening, gampang rontok. Kalo yang cara di video ini kan saya catnya di bagian dalam, tempat lemnya bukan di luar
@@JuliusPerdana oh begitu ya om, terima kasih om ilmunya
what’s the difference between wet sanding and normal sanding?
@@FishingSquad12 no mess/ flying foam particle, smoother result and faster.
@@JuliusPerdana thank you
Hello from Ireland 🇮🇪 any chance you could make a BF109 for a 8000 kv or 1000kv motor 😀
Om.model ini bisa buat terbang slow kah
Ya slownya warbird, sama lah kayak mustang
One of rc boeing airplane has two edf to set two esc it two esc each too correlative doing lipo battery ?
Hi Julius, good work as usual ! I can't access to the plan ! Help me please ! Thanks
I just tried it yesterday, the link is working
Dulu idola saya nih di rubrik origami Angkasa, yg paling sering saya buat model F/A-18 nya hahaha
Next time barangkali bikin F/A-18 RC om?
siap om hehehe
Legal parceiro muito bom seu trabalho valeu tô acompanhando a qui no Brasil🛩🛩🛩🛩🛩🛩
Estou fazendo um seguindo as suas instruções. Obrigado por disponibilizar os arquivos e fazer o um vídeo do passo a passo da montagem.
Keren bro...
Pak request cara desain pake blender nya plus perpekura nya dong
Di playlist knowledge sudah ada tapi khusus member
excellent as usual!
Thanks again!
beli alatnya di mana om
yahudd.. suhu aing
Hi Julius, great job, impressive.
Where can I find the laminating film ? How should I search in GOOGLE ?
What is the true name of this foil ? It looks very good.
Best regards
check description
@@JuliusPerdanahola julius cuando me respondes que tengo que hacer para comprarle la cesna 150 y hacérmela traer a nicaragua ?... contestame
Nice model 👌
How do you calculate the CG of your models?
this is one was not calculated, I just search the factory made model and adjust the scale and use that CG. And then make test flights to find the correct one for my model
@@JuliusPerdana such a good method 👍
How do I get the version of this aircraft?
Email me , check description
@@JuliusPerdana What is your email?
I love your videos!!! (:: They are awesoem!
Glad you like them!
Can you make a supermarine spitfire
do you still make paper models?
I wish, but I don't have time anymore for that. I tried on some projects but neglected and not finish. Now I focus my time on RC projects
@@JuliusPerdana it's so sad 😞 my dream is Valok, from Conjunction or Nun.
Maybe you will do some video,how you make PM?
Muy Bueno!!
what your email the one onthe work page doesnot work
check description or channel page
cg
Can you please make Ft corsair !!
ok
Make the American Flying Fortress of World War II
esta bonito , pero le falta un motor mas potente
👍
Wants some more warbird 🤓🤓🤓
Nice model, I already own one but I certainly reproduce this too. I understand Giulio well that you cannot satisfy all our requests ... But I will try anyway and I renew my A400M airbus in a giant scale like the 747. I would like to know if you would be willing to create it ... Thanks. Good job. A hug from Italy.
whereare the plans
@@rosspainter8691 You should ask Julius, not me, I'm waiting for them too. It seems to me that you have to request them by sending an email to his address.
Orang indo ya bang
Sir, please tutorial on modeling in blender and making paper model .... Please so that we can build over custom planes. How to convert model to paper model using... Please sir..
i will do it when my channel reached 50K subscriber
@@JuliusPerdana Thank you @julius_perdana ... It will happen soon.. Waiting for it..
Possibly a slow plane, please🙁😔
Possibly a slow plane, please😭😥
Brother i recommended this plane 2 months ago n here u r building it , awsome. i would love to build it, but do u think is it easy to fly?
fly is easy, take off is tricky, landing is so hard
Hi tell me and the drawings will be
Build a corsair plane
Julius es cesna 172
Hace más de 2 semanas te pregunte por aero modelo si me lo puedes vende es el paiper y a un no recibo respuesta soy de nicaragua
hahahah lagyping rc P-47 Razorback 😂😂😂
Mau niru tapi yang kecil boleh gak om 😂
makin kecil makin susah terbangnya. Ini kalo mau enak terbangnya ukuran 140 cm
Iya sih kalo kecil ribet ngatur posisi electrikna terlalu berdesakan ESC btre dll
Bikin rc yang bisa terbang di darat di air dong om😂😁
Ten. Pilot. Tochyba. Iest. Pijany. Ani. Start. Nie. Udany. I tym. Bardziej. Londowanie. Nalucz. Sie. Lepiej. Sterowac. Bo. Nazawodach. By. Cje. Wygwizdano
beli alatnya di mana om
alat apa?
Hi tell me and the drawings will be
email me
Thanks