Hi my daughter has a pink maybach and when i turn the car on everything works the music sounds etc i checked the pedal it seems ok and i hooked up both wheels to battery and theu both go back n forth fine but when i connect all the wires back in there place n i push on the pedal the wheels go for a quick sec and then makes a click noise and the wheels stop but the power to everything else is still on is there any way u can help me figure this out im totally lost here
Hey iv been searching and searching. Did you figure it out? My wiring looks good to me, iv replaced gear and pedal switches it cut on a couple times for like 5 seconds each but then nothing.
I know I’m late on this, please forgive me. Some of these newer units have thermal breakers, if there is too much resistance they’ll break. Give it a min or two and you have power again. In your case you have power to other things while this has happened. Is there another battery for the auxiliary devices? If yes this would explain this may indicate the battery thermal breaker is tripping. Maybe a new battery maybe time to check resistance on the motors with an volt meter on ohm setting according to the motors specs.
Hello, it could be making a sound due to poor connection or low battery voltage. Truth is you won’t know until you pull it apart and start testing with a volt meter. You can find cheap ones on Amazon for about $10-15. I hope you are able to find the cause of your problem.
Hi. My son has a brand new power wheel and he rode over the side walk which caused it to scape the bottom of the power wheel and now it won't accelerate. The battery is fully charged it just won't go. What could this be ? It's only 1 day old
Hi Tanya- with it being brand new my first thought is return but it’s Christmas Eve and the stores are likely closed or close to it not to mention the crazy lines and whether or not they have inventory left. With it being a scrape my thoughts are to look for any wiring however most of these have protective plastics underneath. My next thought is a connection has come loose with the thud. I would start with the battery and make my way to the gear selector. Than the pedal. If there I are safety switches or sensors according to the manual I would check those connections as well. With it being brand new I am hesitant to suggest taking anything apart as it may your return. Wish you the best and a Merry Christmas JT
Hello, pleas one help, i dont find some parts of gaucho superpower, the electronic card have burned but can repaired, pleas if yu can give me yur whatsapp or email i can show the picture to you, i think yu can help, thanks
I knew someone would have done before I needed to. Thank you!
There's nothing like a good dad. Thanks for sharing.
Thanks for demonstrating this a second time!
This was a different issue, same component, same symptoms.
Thanks dude
Hi my daughter has a pink maybach and when i turn the car on everything works the music sounds etc i checked the pedal it seems ok and i hooked up both wheels to battery and theu both go back n forth fine but when i connect all the wires back in there place n i push on the pedal the wheels go for a quick sec and then makes a click noise and the wheels stop but the power to everything else is still on is there any way u can help me figure this out im totally lost here
Hey iv been searching and searching. Did you figure it out? My wiring looks good to me, iv replaced gear and pedal switches it cut on a couple times for like 5 seconds each but then nothing.
I know I’m late on this, please forgive me. Some of these newer units have thermal breakers, if there is too much resistance they’ll break. Give it a min or two and you have power again.
In your case you have power to other things while this has happened. Is there another battery for the auxiliary devices?
If yes this would explain this may indicate the battery thermal breaker is tripping. Maybe a new battery maybe time to check resistance on the motors with an volt meter on ohm setting according to the motors specs.
Thanks
When I hit my kids pedal it doesn’t do anything but make a little sound , would this be it? Or probably something else? Thanks.
Hello, it could be making a sound due to poor connection or low battery voltage. Truth is you won’t know until you pull it apart and start testing with a volt meter. You can find cheap ones on Amazon for about $10-15. I hope you are able to find the cause of your problem.
Our pedal is stuck on GO! and won't stop. Any suggestions?
Hi. My son has a brand new power wheel and he rode over the side walk which caused it to scape the bottom of the power wheel and now it won't accelerate. The battery is fully charged it just won't go. What could this be ? It's only 1 day old
Hi Tanya- with it being brand new my first thought is return but it’s Christmas Eve and the stores are likely closed or close to it not to mention the crazy lines and whether or not they have inventory left.
With it being a scrape my thoughts are to look for any wiring however most of these have protective plastics underneath.
My next thought is a connection has come loose with the thud. I would start with the battery and make my way to the gear selector. Than the pedal. If there I are safety switches or sensors according to the manual I would check those connections as well.
With it being brand new I am hesitant to suggest taking anything apart as it may your return.
Wish you the best and a Merry Christmas
JT
Tanay* autocorrect
Hello, pleas one help, i dont find some parts of gaucho superpower, the electronic card have burned but can repaired, pleas if yu can give me yur whatsapp or email i can show the picture to you, i think yu can help, thanks