How to fix ride on with damaged

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ส.ค. 2024
  • Repair and upgrade your broken 12 volt ride on toy control module. Taking a powerwheels jeep harness swap to get rid of the garbage electronics that most brands of ride ons come with stock. Doing this mod will provide dependable operation with basic switches that can easily be purchased online if needed. In this video we strip the control module and tiny gauge wiring out of a drifter jeep. We replace the wiring with a proven dependable system from a powerwheels jeep. You will need to source a donor jeep and perform surgery to transplant into your broken ride on toy. I refer to this repair as a PW swap and I also go over how to gain traction by removing the low speed series wiring in the shifter wiring system. Parts used in this swap can be purchased thru Amazon using our affilate links below. Clicking and buying from our link helps us bring these how to video to our viewers.
    Upgraded battery- amzn.to/31DFjUw
    Fuse holder- amzn.to/3q41EnD
    ABS brake resistor- amzn.to/3G7R2d1
    Shifter switches-amzn.to/3HOZgHr
    PW Shifter harness- ebay.us/uMAwsT
    12 gauge silcone wiring- amzn.to/3t4jqJl
    Accessory rocker switch- amzn.to/3zEog11
    Soldering station- amzn.to/3G1Ey6y
    crimp connectors- amzn.to/3F4pMe2
    Wire crimp pliers- amzn.to/32YzMZ9

ความคิดเห็น • 35

  • @nikfloydo
    @nikfloydo ปีที่แล้ว +2

    I love the idea of doing a full harness swap from a power wheels. Thank you for sharing this video!
    It's in my future to do a similar swap.. time permitting and donor availability. I purchased a Hyper Toys Jeep Gladiator 12 volt ride-on for my son. He loves it, but I'm having issues with the motors and the circuit board. I can't wait to ditch the crappy electronics and tiny gauge wires on it.

  • @colebeck8407
    @colebeck8407 5 หลายเดือนก่อน +1

    So if i cut the two wire for high speed only how does that switch receive signal and power not being tied to first switch

  • @DadHacks
    @DadHacks 2 ปีที่แล้ว

    El Toro Loco made a cameo appearance in the background!

    • @CustomKidzCars
      @CustomKidzCars  2 ปีที่แล้ว

      Lol, that project has been a major pita! having issues with it running away under full throttle. Not sure if its a defective controller or what. Hope to get back to that one soon.

  • @gerrrumsey8871
    @gerrrumsey8871 3 หลายเดือนก่อน

    What's the piece inside the car that controls the turning ability through the remote control. And how do you replace it? It can only be controlled manually and I can still use the controller to go backwards and forward. But that's about it.
    And It's not the controller. It's the part inside the car.

  • @GersonCardoza-xn3xw
    @GersonCardoza-xn3xw หลายเดือนก่อน

    I modified my kids power wheel. I put two 12v 20AH making it a 24v and now it’s super strong and fast but when it comes to go up a slop it just shuts off, what do you think the problem is? I’m assuming the problem maybe the motherboard but I’m not sure, I’ll order a higher Load Current since the one it has is a Max 25A Load Current

  • @danielloy33
    @danielloy33 วันที่ผ่านมา

    Any tips on how to bypass a smart drive on a Barbie dream camper I have an old harness off of a Yamaha raptor. And what all would I need to keep from frying anything and burning the gears up.

    • @danielloy33
      @danielloy33 วันที่ผ่านมา

      And if I use a drill battery what would I need to do to keep everything safe and keep from frying that battery

    • @danielloy33
      @danielloy33 วันที่ผ่านมา

      I also forgot to mention it has a flashing purple light and will not go now

  • @TheRealBernieLomax
    @TheRealBernieLomax 2 หลายเดือนก่อน

    my kids sopbost ride stops and you have to cycle the ignition to get it back on. It only happens when he goes uphill. It never used to do this. Any ideas?

  • @robinhoodloom5795
    @robinhoodloom5795 5 หลายเดือนก่อน

    Can u direct me to yer video on how to upgrade the Controller to Hobby Grade, with 1 mile reach

  • @karenpenaceballos3934
    @karenpenaceballos3934 4 หลายเดือนก่อน

    My kid car on truck in turning on but isn't turning left and right everything else looks great, can you help me please

  • @Zx14rrrrrrrrrrr
    @Zx14rrrrrrrrrrr 8 หลายเดือนก่อน

    So what do when you have 3 motors? Like on the boomerang?

  • @trubigdogwarrior
    @trubigdogwarrior ปีที่แล้ว

    I bought a ride on 4 wheeler for my 5yr old grandson. Little did I know, it didn’t come with any wiring or battery. Will this work for that?

  • @sedrichudson4374
    @sedrichudson4374 2 ปีที่แล้ว

    Hello, I’m sure you get a million question so I understand if you don’t get to mine. My son has the Uenjoy jeep. The sound stopped working. I’ve changed the speaker but no luck. What do you think the problem could be? I also changed the small motherboard. The one under the hood.
    Also is there a good way to get more speed out of the jeep. Thanks!

  • @sarahcutting4341
    @sarahcutting4341 10 หลายเดือนก่อน

    Hello. The wires that connect to the battery on our Best Choice jeep wrangler are completed gone from corrosion. I found a wiring harness replacement on amazon but I cant figure out how to install it as the red wire looks like its hard wired with screws to the back of the engine? Please help? Helen

  • @endall6783
    @endall6783 2 ปีที่แล้ว

    I didn't understand about the one wheel should spin backwards and the other spin forward. I put one of those wiring kits in a jeep. Both wheels go backwards but switch it forward left one spins forward and the other spins backwards. That's off the ground and it's still got the high/low switch and it's not been rode yet PLEASE HELP🙏.

  • @chrisbrown6590
    @chrisbrown6590 2 ปีที่แล้ว

    i need a board for a wild thang like to get a factory one if not what should i get.just to ride it round the house?

  • @bloodstormzcrimsonskyz623
    @bloodstormzcrimsonskyz623 ปีที่แล้ว +1

    i picked up a jetson and it has a Steel frame under it.....but it comes with that Weely TOTAL TRASH regulator in it. SO its about to get gutted out.......DO NOT EVER BUY WEELY regulators ive had 3 now and they are all total garbage.

  • @Sargis_YVN
    @Sargis_YVN 8 หลายเดือนก่อน

    Hello,
    I am looking to repair a similar ride-on for my son and I need advice on a replacement control board and a picture of what is under the hood. The one we have is missing the control board and fuses. Any help will be appreciated.
    Thank you,
    Sargis

    • @CustomKidzCars
      @CustomKidzCars  8 หลายเดือนก่อน +1

      Most units use weelye brand. Match it up with connectors

    • @Sargis_YVN
      @Sargis_YVN 8 หลายเดือนก่อน

      Thank you.

  • @DadHacks
    @DadHacks 2 ปีที่แล้ว

    Can you add the link for the High Speed/Low Speed switch as well as update the link for the PW harness (currently shows a pinion). thanks!

    • @CustomKidzCars
      @CustomKidzCars  2 ปีที่แล้ว

      Thanks for the heads up. Those new OEM harnesses are hard to find. I wouldn't wait.

  • @glo-f6j
    @glo-f6j ปีที่แล้ว

    Hi I have a Disney horse and carriage ride I cannot get it to work. Got a new battery and new charger for it. What else can I check. (HELP)....

    • @CustomKidzCars
      @CustomKidzCars  ปีที่แล้ว

      Control board can go bad and check any fuses and connectors

  • @jesperpallesen5608
    @jesperpallesen5608 2 ปีที่แล้ว

    Hey i change the motor on my kids car from 12000 rpm to 30000 rpm but the car keeps turing off when the kids get in it to drive when i lift it ru es fine but under load it cut off i try'ed to remove the terminal fuse and run direct but still turing off sounds like it is clicking in the control modul what can i do to fix it
    BTW awasome videoes 👌🙌

    • @CustomKidzCars
      @CustomKidzCars  2 ปีที่แล้ว +1

      Motors want to spin 30k and are drawing too many amps. Those hi speed motors will just burn up in ride ons. I would install power wheels brand motors that spin 16k

  • @richardturner8215
    @richardturner8215 2 ปีที่แล้ว

    How can I get this car to go up hills? Tiniest hill and the car shuts off.

    • @CustomKidzCars
      @CustomKidzCars  2 ปีที่แล้ว

      Needs a bigger thermal fuse because the high amp draw is tripping the unit off to protect from melting the wiring. U risk burning up the wiring but that is what the issue is

  • @idodongtech6318
    @idodongtech6318 2 ปีที่แล้ว

    Hello Good Evening, What could be the problem if the toy Only moves in reverse? If i put in forward it won't. If i put in reverse it will reverse. Only the forward is the problem

    • @CustomKidzCars
      @CustomKidzCars  2 ปีที่แล้ว

      Not sure what model u have but it's either a shifter switch or relay in your main board

    • @idodongtech6318
      @idodongtech6318 2 ปีที่แล้ว

      @@CustomKidzCars it could be the bluetooth receiver or its lets say reciever and the board? The motor is good i tried it.

    • @idodongtech6318
      @idodongtech6318 2 ปีที่แล้ว

      @@CustomKidzCars the switch is also good, i really dont know 😂.
      But in Switch it will reverse and in the remote control it will reverse, but if i put in forward it forward in Switch and Remote. What could be the problem? Board?

    • @CustomKidzCars
      @CustomKidzCars  2 ปีที่แล้ว +1

      @@idodongtech6318 that would be my guess. I really don't like these cheap circuit board models. They fail very easily