Quick and Easy Miter Saw Station Workbench // Woodworking DIY Project
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- Find great PDF plans for this build on my website:
robert-j-kelle...
How to make a very quick, simple, easy miter saw station. For this project, I used just under 16 8-foot 2x4s and a 4x8 sheet of 3/4-in plywood.
Follow me on Instagram to see what I’m working on now:
robertjkeller
PLANS : robert-j-keller.com/plans/miter-saw-station
What wood did you use pine or fir wood
The mitre saws cutting surface doesn’t have to be flush with top of table? I noticed it’s a slight bit lower does it matter?
Well I guess it can’t bc of the rails right?
For everybody who wishes to complain about no measurements and no commentary in the video... The man spent his time and money filming and editing the build for this video. Why not just drop the $2.00 for the PDF plans? You then have your measurements, RJK has some very small compensation for his time and effort, and you have this video to supplement the plans. Everybody wins.
@Brad210UIW 12 ft, plus whatever length you need for your particular miter saw. But easily modifiable to whatever length you want, it’s just changing 1 dimension in the plans.
if they can't figure it out by looking at the video then they shouldn't be working with tools. Some things just takes common sence.
There are thousands of ways to build a bench. I’ve got a new workshop and have had construction plans in my head for weeks. I tend to over engineer, so this is a godsend. Simple and it will do the job. Love it.
What this guy said x10
over-engineer! That's the vast majority of us! LOL!
Same! I’m a new work worker, Mama, almost an empty nester, I LOVE my new miter saw! Although I am having issues with the dam laser 🤣 thank you!
I love the way of the displaying the last two pieces of wood ... lol , humorous
Great video, no BS, no self indulgence, to the point BRILLIANT. SUBSCRIBED
I like that the middle shelf is easy to remove and change in height, because when you buy a new miter saw you don't want to lose your time modifying the table.
Exactly!
Wow, amazing you created this in 4 1/2 minutes. It took me eight minutes. You must have a better saw blade than I use.
Very well done 🤙🏻🤙🏻 Add a fence and T track, stop block and stick down ruler and you’ll be all set
Yes, it would be nice if he did a part two.
That special touch of "thanks for watching" and "subscribe" at the end is just awesome!!
Thanks!
indeed
You don't talk but I surely like your professionalism, simplicity works well .
And you didn’t split a single board with those screws and no pilot hole. What is this sorcery? Excellent work.
Yeah how did this happen?
SPAX construction screws...
None of those screws were close enough to any edge to worry about any splitting.
Thank you! I used your plans and built my own miter saw station...it's awesome!
Nice!
Cool and nicely laid out plans. Thx.I have been using my job site dewalt stand with my mitersaw in my garage and it's a major pain. Always needs to be moved. The jobsite dewalt table saw is also on it's own mitersaw stand, and even more in the way, and too tall for the portable outfeed support things. I've been wanting to set up a quick sturdy and simple essentially permanent, but on wheels, station and this was the one I decided upon this morning. Very cool.
Very very nice! Easy project! God bless you sir
No commentary and straight to the point. Nice upload and nice build. You definitely gave me good tips and ideas. Subscribed!
Nice looking miter saw station... going to add a router as well and do similar build. Thanks for sharing 😊
Just buy the plans! Totally worth the $2 to have all the materials and cut list with color coordinated materials. Just built it last weekend. We don't have a truck to bring the materials home, so we had Home Depot rip down the 4x6 plywood and rip one cut on all of the 2x10s to get them to fit in the car. All in all, I think it took me maybe 4 hours to do final cuts and attachments. I took my time and made sure the boards were flush by hand before screwing fully. I don't have clamps to hold them together. Luckily, just taking my time and by feel, I didn't have any issues with the table being wobbly, thus no need for the leveling feet.
I've been going back in forth in my head for a while about how I'll build my workbench for the garage. Decided to go with your plans. Just downloaded the pdf and heading to Home Depot for the materials. This is what I've been looking for. Will let you know how it turns out.
Project is complete. Plans were spot on. Not one bit of wood was wasted. There is actually six 2x4's left to make braces for a bottom storage shelf, which I did.
Wow, nice vid. Straight to the point. Some guys take 10 minutes to tell us about the salad they had for dinner first.
Nice and simple. The way TH-cam videos should be
Built mine today and it turned out great.
Easy, yet very effective design!👍👍
Great video 👍 I put my shop vac under the saw and attached them. No more clean up.
Heyyy I did that too! Good thinkin'.
I am very new to building things. I spend most of my time in the factory, so any ways I need to build something to go between my washer and dryer. Like a folding station. So u have any ideas I'll be ready to watch.
Nice job on the video. Keep up the great work. Be blessed
Nice job here & reasonably inexpensive. TH-cam is the best thing since the invention of sliced bread methinks.
Thanks for sharing your miter saw workbench build...
Bill on the Hill... :~)
finished mine last weekend. love it!
Congrats! Very good job!
What a video straight to the point get it built and no telling us any other sh*t trying to become technical, “like which way the grain on the wood goes” they do my head in those wan***s
Thankyou very much from the UK !
Nice Job. Thanks for the reminder at the end well done!
End of the video was so awesome. Great work!
Thanks Zach!
thanks, good work and excellent idea the last 2 cuts, very witty
I always wonder who down voters are! I mean, what is there to hate? It looks simple, clean and very useful
mastaace46 a good friend from Oklahoma used to say, “tha’ just ain’t no pleasin’ some folks”.
It's the insecure, jealous, you didn't explain everything, you didn't get me the blueprints, you didn't come over to my house to build it for me kind of people!
Usually liberal and or Democrat.
That is because of no explanations or link to plans.
Could be the lack of wall finish behind it lol
perfect and objective work, congratulations !!!
Great job!
I have the same miter saw so I'll use the same dimensions!
This is awesome! Best vid i seen on this. I’m building it.
Great video. Thanks! Could you put the supports on the inside of the legs so to put shelves on them?
Thanks for this I’m looking forward to making it, just looked at the plans
No pilot holes = no satisfaction. Still gave a thumbs up for videography.
This is a great channel! Awesome build!
Nice, fast, simple. I like.
Subbed.
Awesome video! Thanks!
simple but great design, thanks for the inspiration. i'll start building a mitre saw station in a few days. :-)
Great vid. Mind me asking what the dimensions are? Any plans? Thanks.
There are plans but it cost $2
Reminds me of Ash from Evil Dead 2 and Army of Darkness, building all precise and fast in the workshop before he says.... "Grooovy".
If you mounted tires and a hitch to it you could pull it to the job site.
Simple and easy! Any plans?
great video!
Looks good! I 've added it to my playlist! Many thanks, man!
Thank you for watching!
love the video, i'm complete novice, just starting the long front braces, the cut list is all one length but the video looks like top one is on the outside and the bottom on the inside, won't that be different lengths?
Thanks, this s really good.
Exact almost same setup that built for 3 locations for a chop saw station in a small division of the original Home Lumber/Home Components Truss/Wall/Floor Truss Jack Shop in Littleton, Colorado...lol
Can't find the words... simple, inexpensive, easy...but so effective. One question: how concerned were you with the top of the table being exactly the height of the saw?
Thanks! Yes, the saw being even with the table is very important.
Good job. Hey could you make a miter saw station were the two work bench could come apart from the miter table that's in the middle
Good job
In your plans the lower braces are on the outside. In the video, they are on the inside.
So cool!
Nice video! wish i could work that fast... :)
It’s a lot like the one Bob from ILTMS built but this looks a lot more simple and cheap
Awesome videos man!
Good vid but you probaly should add commentary to it so we know what sizes and stuff your doing
Vou começar o meu em breve! Um abraço do 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
Nice table, do you mind sharing the dimensions
Make it any dimensions you want.
Interested in purchasing the plans but need to know what is the length, width and height first. Thx
Very nice work. Too bad I don't have a garage or large shed to build me one.
Great build, no fancy expensive tools, so simple and effective 👍👍👍
Thanks Nick!
Love the video....... I'm motivated to make one....... Can I bug you for the exact measurements...... Please.
So are all dewalt miter saws the same height as a two by four ?
looks so good i cant wait to make it
👏🏼👏🏼👏🏼 TOP 👷🏻♀️😁
Superb, thank you
est il possible d avoir le plan et le debit .Merci c est super
Buen trabajo 👍
Nice! Now try to swing the miter saw to it’s maximum right or left angles…
Would you mind sharing the measurements? Just bought a miter saw and would like to build this.
would love to see the plans to this also.
I wrote everything up here, let me know if you have any questions!
www.instructables.com/id/DIY-Miter-Saw-Station/
@@RobertJKeller Thank you sir!
Love this! Definitely saving this for when I have a shop.
@@RobertJKeller I bought the plans, where did you get those feet?
Perfect ! 😁🖒
Muito bom 👍🇧🇷 simples e objetivo
Awesome video bro! Can you tell me how long are the spax screws you are using?! Thanks!
Great video! You should speak up a little, I could barely hear your voice ;) I bought your plans, BTW!
Would you recommend using a press-wood plywood over a BC grade plywood for this miter saw station?
Do you have the plans available?
I'm just getting started and want to buy the saw first. Do you mind letting me know what model number this Dewalt saw is. It looks awesome, but I've seen a few different models at substantially varied prices and I don't want to over/under buy. I am not a Contractor and just expect to use it for regular household & Halloween projects. Great video btw. I intend to buy your plans for this, as soon as I purchase my saw. :)
Hi Bruce, you can find the link to the saw, and a short review, on my website:
robert-j-keller.com/tools
So pardon my ignorance lol, I was always told always drill your pilot hole first? Is that only for certain times?
These screws have a self-tapping tip on them, so they are really good about not splitting the wood without predrilling.
Супер, благодарю. 👍
Can you do this with pocket holes?
I personally would not, I don't think it would be strong enough.
What're the clamps called you're using to hold the lumber together? Thanks
J'aurai du regarder cette vidéo avant de faire mon établi 👌
Forgive me I’m a rookie...Can you add drawers to this build
Sure can, I actually did, I just didn't film it.
How long (avg.) does this take to build?
Can definitely be done in less than 1 day.
I wanted to do this with 2x4s but here in México are expensive i dont know why lol :(
If I keep my car outside instead of the garage I would definitely have room for this.
Me.gustaria que me facilita la medida si la tiene
How many lengths of 2x4 did you use.
What are the blue things (3.35)
How long is this station?
We have the same tools. We tool brothers
Do you have a link for those leveling feet you used? Curious if you have a brand preference or not, thanks!
amzn.to/3CefOG6
(affiliate link)
@@RobertJKeller Thanks!
What size screw is that
Some measurements would’ve been nice!
Is the plan downloded after psying via paypal?