hi KJDOT...i am using an old T12 soldering iron...can you teach where the heating element, thermocouple and esd pinouts on the HAKKO T12 temperature control board...i already know these on my soldering iron but not on the temperature control board...thanks.
Thank you Dot for yet another great quality build on here & with that really good look of the balsa wood it can be stained & shellacked or just shellacked to pronounce a brighter wood quality instead of just another metal box look which I like very much. Thanks for all of your videos.
Good job, however your soldering technique needs to be a bit neater, spend an extra few seconds and flow the solder properly. Some of the connections like very sloppy.
Hello dear friend, I have one to put together and i have notice that the picture you show ( at minute 2:30) for the connections of the handle you show that the vibration switch and the thermoresistor are connected both to the ground (the tip of the iron) but when you put it all together ( from minute 6:35 ) you connect them to the negative, can you tell me please witch should i connect then, is it to the ground our is it to the negative? Thank You.
Another Great Video!!!!!Quick question. On the T12 Module, when soldering the Ground and the Negative. Did you leave them separated when soldering? I thought I seen the solder connecting the 2 a little or does it matter? I am building one like yours in the video, with a Plexiglas case today and figured I better ask before I close it up.
Hello again! Been thinking--I just got my soldering handle parts(like the one you have in the video). I noticed that it does not have the tiny SMD 103 Ceramic Capacitor like the OEM versions, or like the 7805 handles with the 103 Ceramic cap going from positive to negative. I am just about to throw one together, just wondering if you think we should have one on these? How is yours running?
Where is the thermistor ? iron only has three connection and the thermistor has to be in the iron and not that black thing you solder as how would it adjust the temp correctly ?
Mais je t'en prie si cela est possible tu peut m'en faire un comme ça hi cela me ferais très plaisir si ces oui je te donnerais mon adresse perso ok a bientôt ...
I notice that you used either a soldering iron or soldering station to make this DIY Hakko T12, if you already had a soldering iron or soldering station, why the hell would you want to make another one for, and for people who may not own a soldering iron or soldering station already, how the hell are they supposed to make this DIY Hakko T12 ? Your video is ridiculous.
For those who don't have a soldering iron, they can borrow a soldering iron from a friend to make a T12 soldering station. This soldering station is used when some people only have a soldering iron and want to upgrade the soldering station. They usually have a soldering iron in their hands. Another video made T12 without using a soldering iron th-cam.com/video/K9vQL-Gk5Rg/w-d-xo.html (From Google Translate, there may be errors, please bear with me)
I would imagine, and would bet you get some bad connections fairly often with the(quite awful) soldering techniques you demonstrate in this video. And judging by the lack of people in the comments pointing this out, you obviously can't take constructive criticism and delete their comments, just as you likely will mine. Don't be such an ignorant fool; Recognize and admit when you're wrong, instead of acting like a child, and doing the equivalent of plugging your ears, and screaming whenever somebody points out you're doing something wrong, which you do a lot of in this video. Have a good one.
機箱用木盒，容易加工，好聰明呀！！祖國DIY大神~讚
谢谢支持
里边有高功率变压器的最好用金属壳
I have a Hakko FM-2027 soldering iron handle and a T13-BC2 soldering tip. What's the output diagram for the temperature controller?
hi KJDOT...i am using an old T12 soldering iron...can you teach where the heating element, thermocouple and esd pinouts on the HAKKO T12 temperature control board...i already know these on my soldering iron but not on the temperature control board...thanks.
for the GND line the cable is connected to GND ac or GND dc
Can i buy that t12 soldering you make?
Hi, Will the warm-up time be faster if we increase the voltage of the smps source inside the soldering iron?
could you do the same or something similar for a hot air gun please
Thank you Dot for yet another great quality build on here & with that really good look of the balsa wood it can be stained & shellacked or just shellacked to pronounce a brighter wood quality instead of just another metal box look which I like very much. Thanks for all of your videos.
Thank you
Good job, however your soldering technique needs to be a bit neater, spend an extra few seconds and flow the solder properly.
Some of the connections like very sloppy.
Love the materials used and the item layout and design, very clean and efficient and enjoyable to watch
Thank you
Looks like Balsa wood?? Plus no stain? Why? Man that's going to get dirty real quick.
Hello dear friend, I have one to put together and i have notice that the picture you show ( at minute 2:30) for the connections of the handle you show that the vibration switch and the thermoresistor are connected both to the ground (the tip of the iron) but when you put it all together ( from minute 6:35 ) you connect them to the negative, can you tell me please witch should i connect then, is it to the ground our is it to the negative?
Thank You.
I really appreciate your including in the video your soldering the 5 pin connections! Still working on my soldering skills. Nice job!
據說這種T12烙鐵,使用開關電源都會漏電然後擊穿板子上的晶片.
How do you calibrate the heat of the gun to match the temperature?
Hi, nice video. Can you please tell what kind of glue/adhesive you used to attach the screen to the front panel (it's in a withe tube). thank you
704silicon rubber
Thinks to you😉😉👍👍
What kind of material do you use in your home-made? Do we sell such material in Russia? What is the name of this wood?
Balsa Wood
is that power supply board of laptop charger
Hi what is the name of the glue you use?
have to use this one for air gun??
can you add a hot air blower with it?
thats a good idea
交流電不接地可以用嗎
订阅你了 终于看见一个中国的DIY大神了
老哥，稳啊！！从B站发展到了油管！！哈哈
其实是从油管发展到B站的ヽ(￣▽￣)ﾉ
KJDOT 猜猜我是谁⊙ω⊙
说实话............猜不到..
KJDOT 最近不是有个人问你嘛。。。那就是我😂
嗯，我知道了，谢谢支持
Absolutely, very good.
And suggest a best soldering gun
Hola dot, te mando un saludo grande de Argentina, quería saber cómo se llama el pegamento blanco con el que pegaste la pantallita
mmsarracino Through the channel I subscribe to support you, thank you
703 Curing Adhesive Sealant Silicone
DIY make iron costs more than fully assembled
Another Great Video!!!!!Quick question. On the T12 Module, when soldering the Ground and the Negative. Did you leave them separated when soldering? I thought I seen the solder connecting the 2 a little or does it matter? I am building one like yours in the video, with a Plexiglas case today and figured I better ask before I close it up.
The ground and the negative are linked together, sorry, my English is not good
You Rock! Thanks for the reply!
You're welcome
Hello again! Been thinking--I just got my soldering handle parts(like the one you have in the video). I noticed that it does not have the tiny SMD 103 Ceramic Capacitor like the OEM versions, or like the 7805 handles with the 103 Ceramic cap going from positive to negative. I am just about to throw one together, just wondering if you think we should have one on these? How is yours running?
Sorry, my English is not good, I can not understand what you are saying
Im sorry berapa volt ini
Out nya 24v
What are the glues that u used to stick the electric boards
704silicon rubber
Very useful wideo. Thx 😄
Thank you
Olá amigo passando para uma super visita, parabens otimos video, show.
盒子剩余空间够大，放进去个电池组（18650之类的做一个）够了，这样停电也能用。
话说，你在在国内哪个平台投视频？
另一个视频中是使用18650供电的，可以看一下，国内哔哩哔哩，优酷，腾讯视频，搜狐，爱奇艺，等等都可以看到我的视频
ok。话说你这秒回真可怕......
呦吼吼
中国制造 支持你啊 兄弟
Where is the thermistor ? iron only has three connection and the thermistor has to be in the iron and not that black thing you solder
as how would it adjust the temp correctly ?
CAN YOU MAKE DRILL PRESS WITH 775 MOTOR?
Panayiotis Konikkos Through the channel I subscribe to support you, thank you
Ok....
Panayiotis Konikkos thank you
450° seriously? Rip tip
Que coñazo fue lo que soldaron ahí???
靓仔这些零件，国内网站有卖不？
屠霸天下 淘宝有，便宜多了
我都是在淘宝上买的
科技DOT 我觉得这个没什么用，对于新手来说，而且配件好贵
是的，新手使用几十元甚至十几元的普通电烙铁就可以，这个比较适合进阶的人来使用的，使用感受和焊接方便程度会比普通烙铁好用很多
科技DOT 嗯，你的点子都很不错，视频也是我喜欢看的类型，你下次diy个3d打印机，😂
from where u buy it's materials
Vinita Garg Through the channel I subscribe to support you, thank you
Can you get your ad video uploaded to your TH-cam channel?
Really fantastic work, man. And great kit!
MC's Creations Through the channel I subscribe to support you, thank you
ABC Thích Chế Didn't understand, bro. :/
MC's Creations You have registered your channel through the channel to support mk offline
老哥牛逼了。。
谢谢支持
Complicato trovare la componentistica!!!
Mobile hot air gun parts name ripring
superb
好厉害！
谢谢支持
good video
Thank you
Nice job
Thank you
HELLO MY FRIEND SUPER CE QUE TU FAIS TU PEUT M EN FABRIQUER UNE CHOSE COMME SA MERCI
Thank you
aAH YES my friend je suis sérieux tu peut m'en fabriquer cela si oui je te donne mon adresse personnel hi thank you
essina to make a needle tip for iron soloda
HP Tutorias Through the channel I subscribe to support you, thank you
Legal, muito bom, essa montagem.
awesome
厉害了。
谢谢支持
热熔胶能粘贴木头，我才知道😂
👍👍👍👍👍👍👍👍👍👍
Duy B Through the channel I subscribe to support you, thank you
HELLO AMIGOS oui tu travail bien cela m'intéresse aussi tu peut me le mettre dans mon colis hi je suis sérieux hi
Thank you
Mais je t'en prie si cela est possible tu peut m'en faire un comme ça hi cela me ferais très plaisir si ces oui je te donnerais mon adresse perso ok a bientôt ...
👏👏👏👍
谢谢支持
Cool
Thank you
👏👍
👍👏
Like hay quad
ABC Thích Chế đi đâu cụng gặp
Nguyễn Hùng uat bạn cx đăng ký kênh hả
Nguyễn Hùng tưởng kênh tiếng việt nam đicmt tiếng việt haha
Kênh nào chế cháo cũng xem giải trí thôi. K cmt tiếng Việt ai bjt ng Việt
Nguyễn Hùng hihi quên
Im the 1
Thank you
MAHDI Through the channel I subscribe to support you, thank you
make 1 hot gun
PROF
first
engineer brothers Through the channel I subscribe to support you, thank you
ABC Thích Chế thnku,I m lso with u and this chnll
I notice that you used either a soldering iron or soldering station to make this DIY Hakko T12, if you already had a soldering iron or soldering station, why the hell would you want to make another one for, and for people who may not own a soldering iron or soldering station already, how the hell are they supposed to make this DIY Hakko T12 ? Your video is ridiculous.
For those who don't have a soldering iron, they can borrow a soldering iron from a friend to make a T12 soldering station. This soldering station is used when some people only have a soldering iron and want to upgrade the soldering station. They usually have a soldering iron in their hands. Another video made T12 without using a soldering iron th-cam.com/video/K9vQL-Gk5Rg/w-d-xo.html (From Google Translate, there may be errors, please bear with me)
Soldering Iron For Soldering Iron... Chuuuuuuuuuuuuuuuuuuuutiya Sala
I would imagine, and would bet you get some bad connections fairly often with the(quite awful) soldering techniques you demonstrate in this video.
And judging by the lack of people in the comments pointing this out, you obviously can't take constructive criticism and delete their comments, just as you likely will mine.
Don't be such an ignorant fool; Recognize and admit when you're wrong, instead of acting like a child, and doing the equivalent of plugging your ears, and screaming whenever somebody points out you're doing something wrong, which you do a lot of in this video.
Have a good one.
Thank you for your suggestion, I will try to improve my method.Sorry, my English is not good.
Hi what is the name of the white glue you use?