Vintage Star Wars Kenner Speeder Bike Restoration and Custom Stickers - Toy Polloi
ฝัง
- เผยแพร่เมื่อ 22 พ.ค. 2024
- The vintage Kenner Speeder bike is one I am often asked to show how to repair. But as it's quite a simple toy rather than just covering a restoration, I thought I would turn it into a custom as well.
This video covers repairing the bike, replacing parts, and creating a custom set of stickers. It's a long video as there is a lot to go over. Enjoy.
Get the custom sticker sheet from www.toypolloi.com
And download the files to 3D print your own replacement parts here: www.thingiverse.com/thing:349...
If you are a fan of Toy Polloi and would like to support the videos, check out: / toypolloi
Or just buy me a coffee: www.ko-fi.com/toypolloi
Visit www.toypolloi.com for decal and sticker PDF's.
You can also follow Toy Polloi on Facebook, Twitter, and Instagram. Follow the links in the Toy Polloi TH-cam channel banner. - แนวปฏิบัติและการใช้ชีวิต
I like watching the old footage of the ladies working at the Palitoy factory making Star Wars stuff. I think you should be in the video pulling it all apart again.
WOW, those stickers really make better the biker
i have got a original speeder bike toy they are great may the force be with you always
Really like the battle damage stickers.
I like the music you played during your Photoshop session! 😊
The stickers do add a lot of visual interest. Takes it up a notch from toy toward model. Certainly desirable for display.
Cool, thanks!
They are awesome! You must create an army!
Awesome! I dig the custom touch! I always think it’s a bit of a missed opportunity to do all of the repairs without adding that little bit more!
Thank you Sir for these nice custom stickers. Looks awesome on my vintage Speeder Bikes. I wish these came with the toy back then.
Thanks. Glad you like them. Amazing what a few stickers can do to a toy.
Dave, the speederbikes with your stickers look absolutely lovely.
I really enjoy watching your creations: taking damaged toys that many would think are just too far gone and renovating and repairing them, breathing new life in toys that otherwise would be discarded. Wonderful to watch and very inspirational!
Christmas 1983 and where Star Wars toys were concerned, although I was pretty sure I would be getting an AT-ST Scout Walker, (which I happily did), it was actually a Speeder Bike I was hoping for the most, but upon opening my presents.. no Speeder Bike! 😥
Until we visited my Nain and Taid later on and I realised Father Christmas had dropped it off for me there instead! 😀
(Great vid, Dave. Those stickers are quality!)
I think the 3d printed parts would greatly benefit from one or two layers of thick primer and a good paint job.
Nice work. The stickers are fantastic!!
Man... _man_ I cannot upvote this hard enough. This is amazing. Makes me want to track down some broken speeder bikes to build a complete one.
Thanks, glad you enjoyed it so much!
More vintage Star Wars toys saved 👍🏻👍🏻
These were always one of the cooler toys from ROTJ, and always the first to get messed up. I have one socked away that's missing pieces, and now that it's entirely restorable, I think I'll do that. And the stickers are fantastic, you really did a great job with those and with this episode generally. Thanks!
Great resto. Tho rear flap files are going to be a life saver for soooooo many speeder bikes.
Thanks. They do work really well. At some point I need to get myself a 3d printer. But space is at a premium, so it's either that or toys 😂
@@toypolloi
Cannot have one without the other.😀
Another great restoration!!! 👍👍👍
Love the video! Always wanted a speeder bike as a kid! Never got one, but I really appreciate the effort to show us how to repair one! Also, thanks to Andy for the 3d printing plans!
Delvis 78 no worries, I only made them because I’d searched high and low for similar things and couldn’t find anything. Glad to share.
I got lucky me bought a mint condition bike, boxed in 1994 from local antiques shop, with few other endor boxed stuff, ewok wings and catapult.
I'm very proud of you you did a great job with them speeder bikes may the force be with you always
Now that's one big pile of ships. 1:16
I really enjoy watching you work Dave.
Take care and Happy Weekend 😁
This is really helpful - thanks!
I'm way jealous of your MAGNIFICENT Photoshopping skills!
When I saw you add lights to the millennium falcon I bought a vintage falcon. Now I want to buy(again) a speeder bike to do it up...
Sorry. I’m a bad influence!
Like so many things in life...a little brute force and a knife!
Dressing those 3D printed parts and then some paint and they'll look great. The stickers look very nice especially the vent shading and control panel. The bottom chassis needs something, perhaps a dash of red and chrome paint on the hoses and structural bits here and there. Thanks, another great enjoyable video. Tom USA
I’m so happy I found this channel 😃 thank you for all the effort you put into the restorations. It’s a sheer joy to watch 👍🏻
Nice job, Dave (once again)!!! I think a good addition would be the Imperial logo on the nose of the main body (fuselage).
The most impressive thing here are your photo shop skills - I'm amazed that took only 45 minutes. I could spend two weeks on that and not get it to look right. And the end results of everything are just astonishing. One of my favorite restorations yet.
Thanks. My day job requires me to be quick and fast in Photoshop. I also study a lot of old toys, so you learn what works well when it comes to making retro style stickers.
You always find a way!
Brilliant video and loved the audience at the start with the Ewoks and speeder bike scout looking on in anticipation. Thanks for sharing!
thank you, love your work and very inspiring .....
you're a legend Brus, I've fixed all my all toys from watching your clips ... check my clips out Brus...
That was so awesome, the fact that 3D printing is becoming a solution for missing pieces excites me, I know of some toys I have that definitely need that attention 🤔
Great video 👍🏽✌🏽
another great video Dave your restorations are amazing
I like how with parts of the shell which are obviously beyond repair, like the one with the battered side at the beginning of the video, you can also create more realistic "battle damaged" bikes (I believe you have nothing against customizations, but I won't go that far as to say that you could paint it black and make it Vader's bike).
Anyway, working with that knife, your mind's attitude, and your kindness ... makes you the veritable McGyver of toys.
Something could certainly be done with those back sections. Even just for blown up ones in dioramas.
I don't go anywhere without a Swiss army knife. The most useful tool I own.
Lovely restoration keep up the videos!
Great video! I really enjoyed it! Nice fixes and lovely stickers!! I received the two Toy Polloi shirts from Teespring the other day. I can't wait to wear them at the next comic book convention I'll be a guest at!
Exciting. Let me know what the T-shirts are like, I've not seen any from Tee-spring yet.
Great as always
Great job, REALLY GREAT!!!
Greattings from México and keep going!!!
Thank you! Will do!
Great video!! They look amazing! I wish I had a 10th of the computer skills you have! Keep up the great work!! 👍☯️👍
Been really looking forward to this vid love the speeder bike and biker scout they were and still my fave been counting the hours at work till break time 👍👍👍
Hope you enjoyed the end result. It's a favorite toy of mine. Always loved it.
@@toypolloiit was epic as always @Toypolloi, im always on the lookout for a speeder bike and trooper for my little 👍
Great video as usual
Wow! Amazing job! Thanks for sharing👍
May the force be with you
great work, man! wow!!! amazing!
I’m surprised that this vid has only gotten 970 or so likes. Just because of the content of the vid it should be quite popular! Cool vid as usual man!
That goes for all my videos 🤣🖖
Excellent work on those custom decals, I do one Day want to try to make some.
You can make filing that lego replacement handle bar post a lot easier by cutting off the large end and then putting the leftover round bar in your drill's chuck and using it as a lathe by running the drill and holding the file against it.
Looking very nice!!
Great video keep em coming 👍👍👍👍🚀
Fantastic
You should paint a few white for Hoth Speeder bikes
awesome
you the man toy pollo
i
@34:46 - YEAH!!!!
Got one without the arm handles from when I was a kid
Loved those bikes! Always lament that in lost mine. Awesome stickers. Really brings them to life. I seem to remember they had damage stickers that went on the tip.
As regards that that aerial. You probably could have chucked it into your drill and held the file against it to kind of lathe it.
I do that sometimes. But for this it would have taken longer to get my drill set up.
@@toypolloi Word. Either way, awesome repairs.
Could placing the plastic in some boiling hot water possibly make separating the plastic easier and maybe avoid breaking the connector pegs?
Great work. In the pre special edition version of ANH they do actually use English on the tractor beam control in the Death Star. Plus they refer to X Wings, Y wings not by the aurebesh character. So using ‘warning’ would be OK as our alphabet does exist in the Star Wars universe!
Great job as usual, when you fixed the handle bar on the speeder bike, with the new black peg, I think you should’ve painted them both black. I think they both look better black, looks as if it’s one piece.And not clipped together.
It's sometimes nice to leave a fix so it's obvious. But I may come back to this and do some more work. As log as people get the idea it can be fixed, that's what it's all about.
Cool only part mine needs is a left handlebar and a single flap on the back
I like that decal sheet - I'm tempted to download it to use, not on speeder bikes - mine are inaccessible behind furniture in the loft - but on a couple of 'Mini Rigs'. That control panel is a very useful decal indeed. You are a master of photoshop, sir. Nice one.
Have you ever thought about doing a 'Create your own custom stickers' Photoshop tutorial? I thought I was reasonably PS savvy, but there's stuff that you're doing in a what looks like a couple of clicks (like adding the shading to the circles and the crosshatched lines and stuff) that takes me ages.
You should check out some of the videos I do over on Toy Polloi Two that cover in more detail the photo shop elements of my projects. Cheers
@@toypolloi Nice one, will do!
I'm having trouble getting some speeder bike toys
Was a bit reluctant to split my bike until I watched this video but now have a bike in numerous undamaged pieces, so, thank you. If you crack the seam and then soak it in wd40, you can free the pegs up without snapping them. The two panels at the rear were a different story unfortunately. Any ideas?
I have a bike that is darker brown with painted weathering, stickers and I think it came with a Luke. I live in the US.....
Yes, that was a POTF2 version from the 90s.
What is the tune used in this episode please
you could also cast resin parts instead of printing
What kind of spring would you use as a replacement?
A compression spring is what you need. Not sure on size as I have never seen one with a spring missing.
What Photoshop program do you use to make the stickers for restoration?
Adobe Photoshop
What kind of printer do you use Dave ?
A cheap canon PIXMA inkjet. It's not great but you can still get good results with it. I've had it for at least 7 years and it's still going.
Wonder who does the ‘Welcome to Toy Polloi voice?
He's a friend of Toy Polloi, and quite a big name in voice overs. But I think most people know him from here 😎
can u paint the 3d printed parts to hide the print lines?
Gamer Id yes, but it's time consuming ...lots of sandpaper required .
I was hoping to see a clip of how to get these to stay together. I have 4 speederbikes that won't clip together. I guess the hook is worn down on each and every one of them. Has anyone out there seen a video that addresses that?
Where did you get the aerial?
ebay
Do you have flaps models to 3d print? I have a bike but missed that pieces
Links are in the description for the files to print. Cheers
Toy Polloi in the link only see the files for handle bike I can't find the flaps
Click on the makers name, all his files will come up.
@@toypolloi Ok, I found it, thanks a lot, I've been looking for flaps many years
Re-watching this for the umpteenth time. One thing I often find that goes wrong with these is the catch for the "explosion" mechanism wearing out and not holding. I've tried filing it out, to create more to hold onto but results have been mixed. WWTPD? (What Would Toy Polloi Do?)
I normally just swap them out with one from another broken one I have. The rear end of the bike is one part I always seem to have loads of in various states.
⭐⭐⭐⭐⭐⭐⭐⭐⭐ I have an old one 1982 but i Lost the parts from the back an the frontal parts👍🏼👍🏼👍🏼👍🏼
1:16....had to re watch to make sure I heard that right😂🤦♂️
I looked on eBay for a die cast land speeder..yep no windshield..
Big pile of ships
Can you call a Speeder bike a “ship”........really??? Maybe.....ok let’s go with it 🤣🤣
Ewoks: Sure they look cute, right up until you remember that they COOK AND EAT PEOPLE!!!
It's too bad you have to actually break the bike and glue it together again in order to fix it. I have a bike that doesn't secure the seat down, but I'd rather not break the piece, so I'll just have to leave it as is.
I hate those things on X-wings.
Are you the devil?
It's clearly a love hate thing. I like them and have made my own for a few ships I've worked on.
Hi
How do you fix the legs as mine do not hold the weight well.