2018 Ford Escape program remote
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- Close all doors on your vehicle. Proceed to open the driver-side door, where you will push the UNLOCK button
Turn the ignition from OFF to RUN 8 times, within 10 seconds. End on RUN the last time to enter programming mode.
At this point, the door locks will lock and unlock. If this doesn’t happen, start over and turn the key faster. Unless the door locks cycle between lock and unlock, you may not have keyless entry.
Within 8 seconds, push any button on your Ford remote to begin programming. The door locks will again cycle, which confirms keyless entry is good to go and ready to use.
If you have a second remote key fob, take that Ford remote and press any button within 8 seconds to begin the door lock cycle. Repeat for any other key fobs you have.
When you have programmed all of your Ford key fobs, turn the ignition to OFF. The door locks will cycle one last time to confirm programming completion.
Where can I get a second key for my 2017 escape and program it myself
Can I program 2 keys ?
What if the door doesnt lock at 8 turns after hearing the chime
Definitely just saved my life
Works great
Saved My life
What does it do?
It reprograms the key, let’s say u need another key, you can get one & reprogram the new key
What if it doesn't have buttons
Brother you saved my life! My key hasn’t worked in 2 years and I just did this and it works again!
Does she know how to start the car?
Thanks
Saved my life…I don’t know how
Does she know how to start the car?
Realmente Funciona, This video works
Does she know how to start the car?
Only the doors are opened and closed?
HIT THE UNLOCK BOTTON AND WHAT????😊
That's what I was wondering @rundatbackturbo2921