This is only a prototype of a free energy permanent magnet motor. Check out the patent of this invention with this link: patents.google.com/patent/WO2006045333A1/en. There is a variety of patents based on this type of motor, they all slightly differ by the number of rotors and permanent magnets and the angle of the permanent magnets. We attempted different configurations of the permanent magnets on the stator. In the last configuration, it seems that there is a positive interaction between the permanent magnets on the rotor and the stator. This free energy permanent magnet motor is attempting to run but after a bit, it slows down and eventually comes to a stop. The original inventors used magnetic shielding to surround the permanent magnets to focus or change the magnetic field of all the permanent magnets. Also, they cut the permanent magnets on an angle which is not the case in our prototype. We believe that if this free energy permanent magnet motor is built according to specifications and according to the patent, with multiple rotors offset to each other to create more imbalance in the motor, it might be an actual working prototype of this type of motor. We used a Cnc machine to precisely cut all of the parts for the motor. Hopefully pretty soon here, we would like to begin selling the parts to assemble most of these motors like a DIY kit. We know there are a lot of people out there that are attempting to build and duplicate some of the free energy motors/patents for themselves but don't have any high tech Cnc precision machineries to cut their parts out which most likely results in a failure attempt.
Mike Brady was unfortunately a scammer and went to jail for it...he accepted money and never delivered a working motor. And he faked a video where it was supposed to be working....
@Renato Ancomrade but nothing about a pole switch.. I’ve never heard of that happing before and anyway If that was the case wouldn’t it slow down then switch back.. etc
Very interesting, looks like the old Perendev motor. I think this don't seem to work, because in 1:16 when he presses the stator's around the rotor, the piece don't even try to spin a little bit, it only locks in place. The Perendev spun up immediately on its own if the stator's came closer and when they where closed it was on full power. To spin this thing per hand with good bearings, there is no problem that it runs good for a short time, especially when there is no magnetic friction, if fake magnets are used. Another thing that bothers me are the long cuttings around the axle, what is the use for these ? Maybe they use compressed air to spin this thing up, works well over a short distance and is easier to hide like a coil or a motor .... just saying
I have played a lot with niodinium magnets, enough to know that the pull of these size magnets is quite strong. A few things leaves me puzzled, the 2 side arms are hinged only at the bottom, their distance from the rotor seems to be random, at the passage of the rotor magnets there is no movement, as if the attractive force was the same at al angles. Also, in one of the side arms the metal screw providing is right next to a magnet, shouldn't that disturb the magnetic field. I don't know. Maybe the magnets on the side arms have been heated to over 100celsius to loose most of their magnetism and one of them is in fact not a magnet but a pulsed electromagnet? Why did you not use clear acrylic?
@@Aboudy1989 it makes no sense for it to feel like it's accelerating without further human input to then suddenly stop by itself, also, how long is "after a bit"? That's why I asked for a longer video, it would be more informative
No he can't. BULLSHIT Where is the torque, what is it doing other than spinning for a long while. Will it start to rotate without you spinning it first? What is the longest amount of time has it spun. Show us it performing useful WORK. Otherwise it's a boring toy, A perpetual waste of time.
@@harrytopia282 a V Gate motor is not hard to get working , all you need to do is make a lever or arm that intermittently elevates the bar magnet away from the v config
Level with me Daniel, how did you come up with this idea ??? This stuff is magical. period. Nicely done also. What would a plan for making this cost Daniel ?? Thanks
Ok Daniel, i read the description and it seems that you are saying as a prototype, its not working even though it appears to run on its own. So is there a way you are making it rotate such as compressed air or elec motor hodden?
Das beste Modell, welches ich je gesehen habe. Wenn das ein Fake ist, dann ist es ein gut gemachter. Nur die Magnete können mit ihrem statischen Magnetfeldern keinen Antrieb leisten. Da müssen andere Energieformen eine Rolle spielen, die wir nicht kennen.
My friend bought one of these and it works perfectly, why do you say in your description that it eventually stops? Because it doesn't, have you been told to say this?
James Rooney knows a thing or two about shielding that could make this run for a very long time. Very good job demonstrating what is possible for the masses
I'm sorry, but did no one notice he took a video and then reversed it? It's visible everytime he "starts" the motor, the movement doesn't match with the principle of adding speed to the rotor, adding the unnatural movements when he turns the motor around lets us know that he didn't break the third law of thermodynamics, lawd🥴
@@cameohochstrasser5895 To be honest, I'm CG artist, and I was looking for some more technical flaws, and didn't noticed that it's reversed image. You are absolutely right. The way he rotates the whole thing gives it off too, and the fact we don't see it slow down, or present that the wheel will stop accelerating when he puts the wings down.
I think, he powers it through the wooden plate, or so. Anyway, Permanent Magnet Motors are working, but you need a kind of copper windings at the magnets to decrease the magnetic flux. The inductive energy you need for it, is lower than the generated power of the engine. He has such devices in his videos.
@@Halumash Most likely a video re-arrangement. But I note your comment above: "Permanent magnet motors are working". Are they? Definitely not! Permanent magnets are not a source of energy, a working magnet motor would violate conservation of energy. And although a variety of building plans and models were presented since decades no one was ever able to demonstrate a working magnet motor in a credible way. Nature can't be tricked.
Hey Kid, Where have you gone? Got busy in your studies? We are waiting for your next inventions. BTW i made Thane hiens bitoroid overunity transformer and confirmed that it does work, i also put the findings on my TH-cam channel.
Thanks for thinking of me. The last two months have been very busy with finishing up the school year, and now I came back from a two week vacation. I just need to get motivated to get back into it and make some new videos again. We watched the video on your channel, and that's great news! Keep up the good work!
At 1:15 magnets configuration was logical but later on in the video it's changed dramatically. I suppose it's 'free' energy, so it doesn't matter really.
Hören sie sofort auf ihren Kinder so einen Schwachsinn bei zu bringen . Wo wir bei Kindern sind . Denken sie mal an eine Schaukel . Wenn sie nicht immer durch eine Fremde Kraft angestoßen wird ,steht sie nach kurzer Zeit still . es gibt auf der ganzen Erde nichts was von selbst läuft und noch Leistung ab gibt . Das haben schon die Römer und alten Griechen festgestellt . Und ist heute nicht anders .
First of all this isnt a free energy motor as once you attach anything to it like a axel the drag wont allow it to work. I assume that this thing spins faster and faster until it vibrates itself to falling over and stopping or until the housing cracks. Do you have a video of the base tied down and let it run till it breaks or tops out?
Bro you shuld know that prototypes are not for big scale production Add big ones increase size of the wheel and it will work But now the question is that its real or not
This one may be fake or not, but such perpetual dynamics do exist, regardless of your stupidity or you likes and dislikes. Saying what you said, clearly shows that clearly, you know nothing about who runs the show on this planet and why we don’t see such devices on shelves. You are of the ones who think that, having been to the indoctrination school, you have been thought everything and now you know everything. Wake the f up and at least be quiet if you don’t know any better.
Even in the case of succeeding in to build a magnetic self running generator,the only real result would be to recover just a percent of the energy used to charge the magnets. Is it that hard to understand?
I disaggree with you. If anyone succeeds in building a self propultion power generator they will get killed by the goverment . Every inventor that has came forward to say they have made a free energy generator has been suicided by the gov . They cant make money on free stuff. Just like the regime we have in office now . He is in the electric buisness with his son in ukraine . Bareesma . U cant sell electric cars with cheap gas being sold . Anyone wonder why its $5 a gallon ?
@@RonOrtman huh? You miss the point, completely. By the way for the rest I agree with you: individual energy freedom for the masses is not allowed: to be murdered is a real risk.
I got this in the mail today and put the N52 5/8 x 5/8 neodymium magnets in there in this same ecaxt polarity setup as this and mine dont even spin like that at all any help at all will help .
So ist es . Die werden sich N I E drehen . Denken sie einfach heute ist der erste April . Dann ist die Enttäuschung nicht so groß . Sie sind nicht der Erste der auf so einen Mist hereingefallen ist . Werden auch mit Sicherheit nicht der Letzte sein.
Good Job, this is very transparent and the sound of this motor proves that is does work, it is perendev motor and magnets has form of energy and could be transformed into mechanical form of energy. NO LAWS ARE BROKEN
Oh yes, the law of conservation of energy is broken. Ok, permanent magnets have energy, the get it in the process of magnetizing. The amount of energy is specified in data sheets, it is surpringly low even for strong magnets, about 0.5 Wattseconds for one cubic centimetere and this energy is not spent when magnets exercise forces. This small energy could not drive a motor for a reasonable time, and in addition, when you buy a magnet you have already paid for the energy in the magnet. You would be much better of to buy energy instead of magnets. But since not even this small energy is transformed into mechanical energy magnet motors do not work. Blueprints for "working" magnet motors are around since decades, but where can I see a running one which does not stop?
Ok for the people out there don't understand there are 2 type of magnets here one is dramatically and the other is along the shaft of the magnet two different magnetic fields pay attention what is said before you say it dont work I have made a single pole magnet using this principle all according to Dirac
This what you call Perendev magnet motor I draw on the earth year 1989 (maybe year before or after). A couple of people saw it and start asking questions. Debate was a week or two after, but we did not have magnets.
NOT his invention, not even his idea. The Perendev Magnetic Motor concept has been around since - wait for it. 1269 ad. "First ideas of a magnetic motor were put forward by Petrus Peregrinus de Maricourt in 1269, who imagined a toothed wheel that is continually moving by the force of magnets."
Ok, so what is the energy flow happening here, we have the Earth's own magnetic field presumably influencing things, and magnetic potential energy in the magnets. How does it prevent magnetic lockup in a field and continue operation? From what I understand from modern electric motors they use PWM to give the motor and electromagnetic kick at precise electronically controlled intervals for higher efficiency.
If this really works, it will change everything... Maybe the trick is to have this kind of Hallbach array inside the stator ? Also if it dischages the magnets after a while this could probably be fixed by applying some iron sheets metals to guide the flux into the right direction...or shield negative discharging forces...or use other magnets which are not conductive, so they have no eddy currents...
No! It is no Halbach arrangement . I noted that he used a type o " counter magnetic weght" sistem . You should to se the entire stator , you will note that, the north poles cancels the south and/or north forces on the stator using the rotator as a circular "lever" depending where the magnetic resistence to spining be spoted. Note that he need to sping the rotator with the hands to start mouter . So he win the first magnetic resistence first, and the magnets do the rest.
@Renato V.R.S. here you are. This link below . Take a look ! th-cam.com/video/h8tuufTM9Bg/w-d-xo.html There is many old mens and womans that was " deceived" with this " fake" magnetic mouter . No have any violation of laws . I am from Brasil and no uderstand the inglish so well , but you will get it more . They puted a propeler on the axle to show that the mouter produces kinetic energy trhow the air . Is no necessary to plug a generator . He disassembled the entire mouter . No have any doubt!
Magnets = Magic! Considering the magnets on the armature attract the magnets on the flywheel equally as they approach and as they retreat, this thing should grind to a halt fairly quickly. But, it doesn't. Hmmmm. Those cuts in the center of the wheel would act as a turbine blades wouldn't they? Say, you don't have a high pressure air source pointed at this thing and you dubbed sound over it, did you?
@@MrSummitville How do you know? Have you tried to build one? Unless you can prove something is a hoax, you should keep it to yourself. If you can prove it is a hoax, put a video showing how it is and how it was done. As of yet, you don't have any videos.
It allows down and stops because of friction/heat in the bearings. You need to float the axle with magnets. Zero friction. Just like a blade balancer for hobby propeller blades.
Nothing is gained by removing the friction. The rotor can spin for a much longer time then but it won't do any work. If you try to attach a load it will stop quickly. A motor which can't do work is useless.
@@sciencefreak9070 what? your saying two different things here. i told you if you remove friction it will not stop. that is true. friction is your issue here. magnetic bearing and put it in a vacuum. as for doing work, i said nothing about doing work. yes my friend. of course this motor will not do any work. no one was in doubt about that.
@@freelectron2029 " _No one was in doubt about that (the motor will not do any work)_ " I know the motor can't do any work, and you know it too. But there are many who do have doubts about that. "Daniel's Inventions" claims it does do work and many commenters here also think that such a motor could do work. A construction which only spins for a long time is of not much use. If this would be the aim, there would be no point to use magnets. People who experiment with such designs always hope to get work done by their constructions.
@@sciencefreak9070 so it sounds like your intention is to "debunk". if so then i think you have missed the utility of an invention that has a COP of 1 or more but cant do any work due to your intentions causing you to be blind to the implications.
@@freelectron2029 I know about devices with a COP > 1, but these devices don't violate conservation of energy. In contrast, a motor driven by permanent magnets only would violate conservation of energy. Some argue that there is no such violation since a still unknown type energy is at work, but I doubt that. What are the implications you think I am blind to? Can you give me an example?
No, it likely works is shown. But first you have to impart rotational inertia, and he does that with his finger right at the beginning. After that the weight of the wheel stored in the rotation plus the magnetic repulsion causes it to continue to spin. Now if you were trying to generate energy from this, you'd have to attach a motor to it which would invariably cause resistance in the spinning shaft and cause it to come to a complete stop very quickly. This will not generate free energy.
@@oudotcom Yes it does accelerate. But there's no load on the spinning shaft. Coupling the shaft to something else to do some useful work would cause drag and eventually slow the spinning to a halt. This contraption produces no useful torque.
@@jacobm5186 Well if a load is applied and the rotor would spin down from maybe 500 RPM to only 100 or 200 RPM that still could drive a small generator to light a few LEDs..
@@oudotcom I am not sure if there is really an acceleration. First of all, the rotation right at the beginning looks much faster as you would expect from the movement of the finger. There seem's to be a video cut. Also, the rotation speed is difficult to judge since the limited frame rates interferes. One can even watch the well known illusion of videos that it rotates backwards.
Several years ago, a company in Europe was selling Perendev generators. Then a dealer offer "help" but start to sell systems promising more power than they deliver... So customers start to suing that company and ultimately broke the company. One could wonder if it was help or sabotage...
You are referring to Mr. Brady, the "motor" shown here is partly based on his patent. Which he filed but it was never granted. Before Mr. Brady appeared on the scene there was no company selling Perendev generators, it was Mr. Brady who founded the company "Perendev Group" in Germany. And Brady's problem wasn't that he sold motors with less power than promised, he didn't deliver anything, although he had cashed heavy prepayments. With all this money he left Germany 2007 for a luxurious life in Switzerland. 2010 he was arrested and sentenced in Germany for fraud. Since he has spent all the cashed money his victims could not be reimbursed. He was released from jail 2014 and after some years he moved to South Africa. Where he is again active in the magnet-motor field and looks for gullible investors ...
This is only a prototype of a free energy permanent magnet motor. Check out the patent of this invention with this link: patents.google.com/patent/WO2006045333A1/en. There is a variety of patents based on this type of motor, they all slightly differ by the number of rotors and permanent magnets and the angle of the permanent magnets. We attempted different configurations of the permanent magnets on the stator. In the last configuration, it seems that there is a positive interaction between the permanent magnets on the rotor and the stator. This free energy permanent magnet motor is attempting to run but after a bit, it slows down and eventually comes to a stop. The original inventors used magnetic shielding to surround the permanent magnets to focus or change the magnetic field of all the permanent magnets. Also, they cut the permanent magnets on an angle which is not the case in our prototype. We believe that if this free energy permanent magnet motor is built according to specifications and according to the patent, with multiple rotors offset to each other to create more imbalance in the motor, it might be an actual working prototype of this type of motor. We used a Cnc machine to precisely cut all of the parts for the motor. Hopefully pretty soon here, we would like to begin selling the parts to assemble most of these motors like a DIY kit. We know there are a lot of people out there that are attempting to build and duplicate some of the free energy motors/patents for themselves but don't have any high tech Cnc precision machineries to cut their parts out which most likely results in a failure attempt.
The second prototype is clearly speeding up!?
Mike Brady was unfortunately a scammer and went to jail for it...he accepted money and never delivered a working motor. And he faked a video where it was supposed to be working....
@@oudotcom I’m sure that’s true. But you can observe in this video it clearly speeding up.
@Renato Ancomrade I can’t see where it says that!?
@Renato Ancomrade but nothing about a pole switch.. I’ve never heard of that happing before and anyway If that was the case wouldn’t it slow down then switch back.. etc
Very interesting, looks like the old Perendev motor. I think this don't seem to work, because in 1:16 when he presses the stator's around the rotor, the piece don't even try to spin a little bit, it only locks in place. The Perendev spun up immediately on its own if the stator's came closer and when they where closed it was on full power. To spin this thing per hand with good bearings, there is no problem that it runs good for a short time, especially when there is no magnetic friction, if fake magnets are used. Another thing that bothers me are the long cuttings around the axle, what is the use for these ? Maybe they use compressed air to spin this thing up, works well over a short distance and is easier to hide like a coil or a motor .... just saying
Video inverse play3. Look hand movements.🤣
That's because it is, he bought a kit.
*_The cars here in my city all run with these engines. There are no more gas stations. Mechanical parts stores now sell magnets by the kilogram_*
I have played a lot with niodinium magnets, enough to know that the pull of these size magnets is quite strong. A few things leaves me puzzled, the 2 side arms are hinged only at the bottom, their distance from the rotor seems to be random, at the passage of the rotor magnets there is no movement, as if the attractive force was the same at al angles. Also, in one of the side arms the metal screw providing is right next to a magnet, shouldn't that disturb the magnetic field. I don't know. Maybe the magnets on the side arms have been heated to over 100celsius to loose most of their magnetism and one of them is in fact not a magnet but a pulsed electromagnet? Why did you not use clear acrylic?
If there ins t Mumetal can t go
I tried everything you could think of and the magnets work against them selves and eventually stop
@@RichardGiannini gotta keep the patter up one slip and it’s over. Like a timing belt maybe but keep them from finding love
is this available for hands on inspection or selling a kit yet
what do you need it for?
Could you make a video of this working next to a clock for like 3hours without intervention?
read the description
@@Aboudy1989 it makes no sense for it to feel like it's accelerating without further human input to then suddenly stop by itself, also, how long is "after a bit"? That's why I asked for a longer video, it would be more informative
No he can't.
BULLSHIT
Where is the torque, what is it doing other than spinning for a long while.
Will it start to rotate without you spinning it first?
What is the longest amount of time has it spun. Show us it performing useful WORK. Otherwise it's a boring toy, A perpetual waste of time.
How long did it run? Did you test that?
Twenty years once you've powered it says a old guy he makes videos about magnetmoters in the 60's. But i think they have longer lifetimes.
Hey Daniel do you have the template for the pvc pieces and the magnet sizes?
@@harrytopia282 thats what a lot of first time electronic hobbyists' say . If at 1st you fail try and try again.
@@harrytopia282 not so i made a v gate and it worked fine .
@@harrytopia282 apparently you have no manners and you dont have the fundamentals to understand how the v gate works so i must be leaving this convo
@@harrytopia282 lol
@@harrytopia282 a V Gate motor is not hard to get working , all you need to do is make a lever or arm that intermittently elevates the bar magnet away from the v config
Level with me Daniel, how did you come up with this idea ??? This stuff is magical. period. Nicely done also. What would a plan for making this cost Daniel ?? Thanks
Info in the link.
@@johnM-Jr Thank you John and Daniel for showing us all that magnets rule the universe.
@@harrytopia282 Please give more information Harry. Thanks
Get an air compressor. Hide the sound. Put in music.
Is this for sale? I want to buy one that is working exactly in the video.
It looks amazing.
Can it perform work ?
Ok Daniel, i read the description and it seems that you are saying as a prototype, its not working even though it appears to run on its own. So is there a way you are making it rotate such as compressed air or elec motor hodden?
Possieble...bu Air pressure
Will it be able to take the load ?
where does the energy for rotation come from? And why are the external magnets rotated at different angles?
how much torque???
Hi, how long did it running?
Das beste Modell, welches ich je gesehen habe. Wenn das ein Fake ist, dann ist es ein gut gemachter. Nur die Magnete können mit ihrem statischen Magnetfeldern keinen Antrieb leisten. Da müssen andere Energieformen eine Rolle spielen, die wir nicht kennen.
Hello. The plastic elements are 3d printed? Thank you.
My friend bought one of these and it works perfectly, why do you say in your description that it eventually stops? Because it doesn't, have you been told to say this?
I know your friend. He connected his aluminum hat to the overhead line of the train and it's been running ever since. 😅
Wo bestellst du Magnet?
Guten Morgen.
Wo kann man diese Teile bestellen?
Kann man das kaufen?
Esse Rotor tem força para girar um alternador gerador de carro ?
Đừng quan tâm đến lực quay, mà trước tiên phải thực nghiệm xem có hoạt động không đã.
Would it run a fan blade?
No, it won’t run anything.
How long does it mooves?
Me interesa donde se puede comprar ¿ gracias
Can share the plastic housing drawing ?
Can you make a fan with this?
As always, excellent job Daniel.
No, he bought a kit, this is NOT his own work. It's call a "Perendev Magnet Motor ", you know, named after the guy that invented it.
how long takes a perendev motor to spin?
Me interesa.... Donde o como se puede comprar....?
So, what happened with configuration No. 1? Is it also working?
James Rooney knows a thing or two about shielding that could make this run for a very long time. Very good job demonstrating what is possible for the masses
I'm sorry, but did no one notice he took a video and then reversed it? It's visible everytime he "starts" the motor, the movement doesn't match with the principle of adding speed to the rotor, adding the unnatural movements when he turns the motor around lets us know that he didn't break the third law of thermodynamics, lawd🥴
@@cameohochstrasser5895 To be honest, I'm CG artist, and I was looking for some more technical flaws, and didn't noticed that it's reversed image. You are absolutely right. The way he rotates the whole thing gives it off too, and the fact we don't see it slow down, or present that the wheel will stop accelerating when he puts the wings down.
Can you give us the 3d printed design for the magnets ?
ya I wanna know where he hid the battery too lol
I believe that there is a way to adjust magnets to make it works!
Bom projeto, mas já testou se realmente funciona ?????
Não funciona, magnetismo estático não produz eletricidade.
how many minutes does it take?
J'aime beaucoup combien de temps reste t'il stable en rotation
I think, he powers it through the wooden plate, or so.
Anyway, Permanent Magnet Motors are working, but you need a kind of copper windings at the magnets to decrease the magnetic flux.
The inductive energy you need for it, is lower than the generated power of the engine. He has such devices in his videos.
Who's videos w copper windings?
even easier. I dispersed it with a drill or something, and then reshot the video backwards.
you can use mu metal like you find on the magnets in a hard drive.
@@antonpankrat4594 Jap, 100 % right, It´s a Video re-arrangement 😀
@@Halumash Most likely a video re-arrangement. But I note your comment above: "Permanent magnet motors are working". Are they? Definitely not! Permanent magnets are not a source of energy, a working magnet motor would violate conservation of energy. And although a variety of building plans and models were presented since decades no one was ever able to demonstrate a working magnet motor in a credible way. Nature can't be tricked.
Do I see well that it accelerates by itself? So you say after some time it decelerates? What happens if you accelerate it even faster as hell?
Mais alors cela fonctionne, combien de temps reste t'il en rotation stable, même si cela ne dure que quelques heures c'est déjà bien
Hello Daniel, I would like to buy a copy from you, how can I do it and can I also turn the part with an alternator?
What type of plastic is used for this magnet powered wheel and do you have instructions for it on how to build
Can someone tell me where to get the magnets
Good.This Perendev project right!
Hey Kid,
Where have you gone?
Got busy in your studies?
We are waiting for your next inventions.
BTW i made Thane hiens bitoroid overunity transformer and confirmed that it does work, i also put the findings on my TH-cam channel.
Thanks for thinking of me. The last two months have been very busy with finishing up the school year, and now I came back from a two week vacation. I just need to get motivated to get back into it and make some new videos again. We watched the video on your channel, and that's great news! Keep up the good work!
Would you send a replica to Brazil to be used for high school classes?
purpose, application?
Was there a specific reson for having 9 magnets on one side and 10 on the other?
can it fly?
What's the Hz of the rotate
Witam
Oglądam film i widzę, że łopatki boczne występują na początku filmu w innej konfiguracji niż na końcu filmu.
Chyba coś tu jest nie tak...
Made in india with love and compressed air!!!
They all do the same, we will probably never know.
😅 😂 😅 😂 😅 😂 😅 😂 💨💨💨💨💨💨
EXACTLY!!!
sorry, but is there the possibility of having the file for the 3D printer of the project to make the plastic base, if I wanted to do it myself?
At 1:15 magnets configuration was logical but later on in the video it's changed dramatically. I suppose it's 'free' energy, so it doesn't matter really.
I would like to buy this from you... Are you selling?
wow i thought it would spin counter clockwise...but you got it going clockwise....hmmm
0:51 sebaiknya diberi warna Merah🔴 dan Biru 🔵 buat kutubnya.
Bisa berputar🌀, tinggal tambahkan fly wheel.
Can we buy a working version .why don't you sell this. Nervous?
Hello, I am trying to create one magnet motor on my 3d printer to teach for my kids, is it possible you share how did you do this project?
good luck making them
Hören sie sofort auf ihren Kinder so einen Schwachsinn bei zu bringen . Wo wir bei Kindern sind . Denken sie mal an eine Schaukel . Wenn sie nicht immer durch eine Fremde Kraft angestoßen wird ,steht sie nach kurzer Zeit still . es gibt auf der ganzen Erde nichts was von selbst läuft und noch Leistung ab gibt . Das haben schon die Römer und alten Griechen festgestellt . Und ist heute nicht anders .
as the director of princeton university I can confirm that laws of thermodynamics do not apply in india.
First of all this isnt a free energy motor as once you attach anything to it like a axel the drag wont allow it to work. I assume that this thing spins faster and faster until it vibrates itself to falling over and stopping or until the housing cracks. Do you have a video of the base tied down and let it run till it breaks or tops out?
Bro you shuld know that prototypes are not for big scale production
Add big ones increase size of the wheel and it will work
But now the question is that its real or not
I was lookin for motor like this. I’ve got idea. And need motor magnet. Can I use idea like this in the video?
Magnet : am i joke to you 😂
Yea really!
Does it matter which way the magnets face?
Those are magnets? Wow thought they were just metal pieces and the air makes it turn.
Great.....It's week-end unreal...
Is it possible to buy this prototype!
A dream to ne...
If real, shouldn't all these devices be mass produced and on store shelves alongside science gadgets like Newton's Cradle and Gyroscopes?
It is real, I had made this 3 years ago with cardboard.
@@perfumebar-in Ok...I made a free energy engine powered by hamsters running around an internal wheel.
@@rayharvey1330 magnet out live tiny rodent.
@@perfumebar-in lmao stop the cap its fake
This one may be fake or not, but such perpetual dynamics do exist, regardless of your stupidity or you likes and dislikes.
Saying what you said, clearly shows that clearly, you know nothing about who runs the show on this planet and why we don’t see such devices on shelves. You are of the ones who think that, having been to the indoctrination school, you have been thought everything and now you know everything. Wake the f up and at least be quiet if you don’t know any better.
Bravo, you got it. 😊
Hi daniel, do you have the files to print it on a 3D printer please?
Hello. I am interested in purchasing such a generator. I can't print it or make it by hand. How can I contact you to buy one?
Even in the case of succeeding in to build a magnetic self running generator,the only real result would be to recover just a percent of the energy used to charge the magnets. Is it that hard to understand?
I disaggree with you. If anyone succeeds in building a self propultion power generator they will get killed by the goverment . Every inventor that has came forward to say they have made a free energy generator has been suicided by the gov . They cant make money on free stuff. Just like the regime we have in office now . He is in the electric buisness with his son in ukraine . Bareesma . U cant sell electric cars with cheap gas being sold . Anyone wonder why its $5 a gallon ?
@@RonOrtman huh? You miss the point, completely. By the way for the rest I agree with you: individual energy freedom for the masses is not allowed: to be murdered is a real risk.
MUCHO FREE ENERGY PERO NO SE COMPARTE LOS PLANOS COMO HACERLO
I got this in the mail today and put the N52 5/8 x 5/8 neodymium magnets in there in this same ecaxt polarity setup as this and mine dont even spin like that at all any help at all will help .
So ist es . Die werden sich N I E drehen . Denken sie einfach heute ist der erste April . Dann ist die Enttäuschung nicht so groß . Sie sind nicht der Erste der auf so einen Mist hereingefallen ist . Werden auch mit Sicherheit nicht der Letzte sein.
@@reinhardwerther4641 english ?
Can you addup some machanism like a boxer engine?
Yet another cool experiment, you're almost there, got inspired to do my own stuff, thank you 👏👍
@@harrytopia282 get a life kid
@@harrytopia282 yer mum is wanker
@@harrytopia282 ur mum take this _/_
@@harrytopia282 grow up kid
Good Job, this is very transparent and the sound of this motor proves that is does work, it is perendev motor and magnets has form of energy and could be transformed into mechanical form of energy.
NO LAWS ARE BROKEN
Oh yes, the law of conservation of energy is broken. Ok, permanent magnets have energy, the get it in the process of magnetizing. The amount of energy is specified in data sheets, it is surpringly low even for strong magnets, about 0.5 Wattseconds for one cubic centimetere and this energy is not spent when magnets exercise forces. This small energy could not drive a motor for a reasonable time, and in addition, when you buy a magnet you have already paid for the energy in the magnet. You would be much better of to buy energy instead of magnets.
But since not even this small energy is transformed into mechanical energy magnet motors do not work. Blueprints for "working" magnet motors are around since decades, but where can I see a running one which does not stop?
Yes there are. The video of it "speeding up" is played in reverse. Duh. Watch the hands moving it around. The movements are just not right.
The sound of the motor proves….I can’t even anymore, just ridiculous.
are you retarded
Ok for the people out there don't understand there are 2 type of magnets here one is dramatically and the other is along the shaft of the magnet two different magnetic fields pay attention what is said before you say it dont work I have made a single pole magnet using this principle all according to Dirac
If it is really accelerating, which it sounds like it is; why would it slow down and stop?
so youtube doesn't ban the video and restrict his account. I Guess so
@@Aboudy1989 Thanks for your realistic insight!!
is the base plate 3D printed? if yes, can you release the file for download?
You can buy it on the website
Awesome motor! Now put a fan blade on the shaft and you will have a nice little fan.
= a vortex?
This what you call Perendev magnet motor I draw on the earth year 1989 (maybe year before or after). A couple of people saw it and start asking questions. Debate was a week or two after, but we did not have magnets.
NOT his invention, not even his idea. The Perendev Magnetic Motor concept has been around since - wait for it. 1269 ad.
"First ideas of a magnetic motor were put forward by Petrus Peregrinus de Maricourt in 1269, who imagined a toothed wheel that is continually moving by the force of magnets."
Nice! Hopefully you can get others to replicate independently. Enclose it in a plexiglass box to show it is not a compressed air trick.
It is a reversed video. You can tell by the sounds
Has anyone ordered the diy kit yet? I'm curious how it was if so.
Ok, so what is the energy flow happening here, we have the Earth's own magnetic field presumably influencing things, and magnetic potential energy in the magnets. How does it prevent magnetic lockup in a field and continue operation? From what I understand from modern electric motors they use PWM to give the motor and electromagnetic kick at precise electronically controlled intervals for higher efficiency.
its fake
How much.
If this really works, it will change everything...
Maybe the trick is to have this kind of Hallbach array inside the stator ?
Also if it dischages the magnets after a while this could probably be fixed by applying some iron sheets metals to guide the flux into the right direction...or shield negative discharging forces...or use other magnets which are not conductive, so they have no eddy currents...
No! It is no Halbach arrangement . I noted that he used a type o " counter magnetic weght" sistem . You should to se the entire stator , you will note that, the north poles cancels the south
and/or north forces on the stator using the rotator as a circular "lever" depending where the magnetic resistence to spining be spoted.
Note that he need to sping the rotator with the hands to start mouter . So he win the first magnetic resistence first, and the magnets do the rest.
Take a look at a video where is showed Yldiz Magnet mouter . There is a worldly exposition about magnetic propulsion.
Menga yasab berasizmi? Va narx qancha
@Renato V.R.S. yep! Just a minute!
@Renato V.R.S. here you are. This link below . Take a look !
th-cam.com/video/h8tuufTM9Bg/w-d-xo.html
There is many old mens and womans that was " deceived" with this " fake" magnetic mouter .
No have any violation of laws . I am from Brasil and no uderstand the inglish so well , but you will get it more .
They puted a propeler on the axle to show that the mouter produces kinetic energy trhow the air . Is no necessary to plug a generator . He disassembled the entire mouter . No have any doubt!
Magnets = Magic!
Considering the magnets on the armature attract the magnets on the flywheel equally as they approach and as they retreat, this thing should grind to a halt fairly quickly.
But, it doesn't. Hmmmm.
Those cuts in the center of the wheel would act as a turbine blades wouldn't they?
Say, you don't have a high pressure air source pointed at this thing and you dubbed sound over it, did you?
I have yet to see anybody able to sell just one
That's probably because no one wants to go bankrupt because only complaints come in. 😅
Can you post the .ojt file to 3d print this or at least the file needed to open this in Fusion 360?
@@MrSummitville How do you know? Have you tried to build one? Unless you can prove something is a hoax, you should keep it to yourself. If you can prove it is a hoax, put a video showing how it is and how it was done. As of yet, you don't have any videos.
= to go for a tank?
Try magnetic bearing inside a vacuum chamber and it will probably run for way longer, these two frictions are your last biggest energy losses.
It allows down and stops because of friction/heat in the bearings. You need to float the axle with magnets. Zero friction. Just like a blade balancer for hobby propeller blades.
Nothing is gained by removing the friction. The rotor can spin for a much longer time then but it won't do any work. If you try to attach a load it will stop quickly. A motor which can't do work is useless.
@@sciencefreak9070 what? your saying two different things here. i told you if you remove friction it will not stop. that is true. friction is your issue here. magnetic bearing and put it in a vacuum. as for doing work, i said nothing about doing work. yes my friend. of course this motor will not do any work. no one was in doubt about that.
@@freelectron2029 " _No one was in doubt about that (the motor will not do any work)_ " I know the motor can't do any work, and you know it too. But there are many who do have doubts about that. "Daniel's Inventions" claims it does do work and many commenters here also think that such a motor could do work. A construction which only spins for a long time is of not much use. If this would be the aim, there would be no point to use magnets. People who experiment with such designs always hope to get work done by their constructions.
@@sciencefreak9070 so it sounds like your intention is to "debunk". if so then i think you have missed the utility of an invention that has a COP of 1 or more but cant do any work due to your intentions causing you to be blind to the implications.
@@freelectron2029 I know about devices with a COP > 1, but these devices don't violate conservation of energy. In contrast, a motor driven by permanent magnets only would violate conservation of energy. Some argue that there is no such violation since a still unknown type energy is at work, but I doubt that.
What are the implications you think I am blind to? Can you give me an example?
and behind the wooden wall there is a rotating magentic field - using electricity from an outlet ..
The video was just played in reverse.
good but it is possible or not sir
Could maybe remotely be powered by a spinning magnet behind the wooden wall ?? This is the only way in my view how he could have faked it...
No, it likely works is shown. But first you have to impart rotational inertia, and he does that with his finger right at the beginning. After that the weight of the wheel stored in the rotation plus the magnetic repulsion causes it to continue to spin. Now if you were trying to generate energy from this, you'd have to attach a motor to it which would invariably cause resistance in the spinning shaft and cause it to come to a complete stop very quickly. This will not generate free energy.
@@jacobm5186 Your statement is false as it clearly accelerates and that can be used to power a generator attached to it... Study some more physics...
@@oudotcom Yes it does accelerate. But there's no load on the spinning shaft. Coupling the shaft to something else to do some useful work would cause drag and eventually slow the spinning to a halt. This contraption produces no useful torque.
@@jacobm5186 Well if a load is applied and the rotor would spin down from maybe 500 RPM to only 100 or 200 RPM that still could drive a small generator to light a few LEDs..
@@oudotcom I am not sure if there is really an acceleration. First of all, the rotation right at the beginning looks much faster as you would expect from the movement of the finger. There seem's to be a video cut. Also, the rotation speed is difficult to judge since the limited frame rates interferes. One can even watch the well known illusion of videos that it rotates backwards.
nice tutorial
Funziona o no?
I bought your invention and I paid $200. dollars for the 44 magnets
I have tried first and second Configuration and it doesn’t work at all
Please help
Several years ago, a company in Europe was selling Perendev generators. Then a dealer offer "help" but start to sell systems promising more power than they deliver... So customers start to suing that company and ultimately broke the company. One could wonder if it was help or sabotage...
You are referring to Mr. Brady, the "motor" shown here is partly based on his patent. Which he filed but it was never granted. Before Mr. Brady appeared on the scene there was no company selling Perendev generators, it was Mr. Brady who founded the company "Perendev Group" in Germany. And Brady's problem wasn't that he sold motors with less power than promised, he didn't deliver anything, although he had cashed heavy prepayments. With all this money he left Germany 2007 for a luxurious life in Switzerland. 2010 he was arrested and sentenced in Germany for fraud. Since he has spent all the cashed money his victims could not be reimbursed. He was released from jail 2014 and after some years he moved to South Africa. Where he is again active in the magnet-motor field and looks for gullible investors ...