@@oriraykai3610 Firstly, there is no doubt. There is no such thing as a free energy device or perpetuum mobile. The laws of physics simply don't allow that sort of thing. Secondly, it's fun to watch people who are trying to fool or entertain people. It's like watching a magic show. There is no such thing as magic. Everybody knows that. It's about the entertainment. It's the "how the heck did he do it" effect. And.... I'm not looking all day long for these videos. I stumble across them while I research important things like cats falling off a table or checking out Two Minute Papers for interesting new advances in AI learning environments.
No battery inside . You can see it being made . They show you under the disc just before they spin it on a continuous video shot . The wires to the motor were as they were , no change. The only question is, how long does it spin for .
The music makes the energy feel more free.. It really gets my free electricity vibes going. Without the music the battery in the base would seem expensive.
@@archibald5777 when you complete the circuit, the wires and motor generate their own magnetic field and increases the resistance of it spinning in a certain direction. i'd assume is why cuz these kinds of motors operate on creating a magnetic field in the copper coil inside of it which spins it's iron casing.
IF there is a Nobel prize for cheating, this 'free energy" guy must get it.IF there is a Nobel prize for being dumb, those who "liked" this video must get it.That include TH-cam too which gives this hack a platform to cheat.
The trick is that you don't know what's inside or under the wooden tablet. I think it is no coincidence that the holes to insert the screws are already made in the tablet before the video starts. I think that once inserted the screws touch the poles of a battery that is inside or under the tablet.
Your statement is silly because spinning a motor “does” create electricity . This is not in question . Also the amount of electricity produced is not important for the sake of experiment . The questionable part of this is the creation of a continuously spinning disc with no apparent source of input energy . How long will the disc continue to spin if left alone ?
@@sobeit1927 Are you saying that the arrangement of those magnets propel the disc? That would never work and you know it, you charlatan. These videos are bollocks and you should be locked up.
The amount of energy it generates can't be more than the potential energy from the magnets. The amount of force to break the lock up point is equal to the force the magnets produce. The ball is at the opening of the horseshoe shaped magnetic field the 3 magnets are making. It would have to produce a lot more force still, to overcome resistance factors in the generator parts, bearings, air, etc
Keep up the great work! Please let me know how long it will continue to spin and what battery you housed inside the base. Is it rechargeable? I'm going to build one of these so I can spoof my friends.
Очень полезное видео, тоже сделал себе такой генератор только из автомобильного колеса, запитал целую деревню, теперь жители платят мне за електроэнергию, я теперт милиионер.
I think the best way to prove it works or doesn't work, is to keep the video running and slow the disk to a stop, while the light is connected. If there's a battery, the light will stay on. If not, the light will go out.
There's no way this could generate enough power to run your house. Are you converting it to a larger motor or something? I'm just trying to learn. Thinking of ways to power my house
Saw someone make something similar to this on the fly with some card stock, a plastic straw and tape. He built a wheel and lined the outside of it with the magnets with a gap. He said the gap was the key to it working and only needed to use one external magnet to get it moving.
I've seen these done with a base where there's nowhere to hide a battery. Turned out there was an air compressor blowing air onto one side & making it spin.
He really worked hard on this. 😂 You got to realize that the reason the people in these countries have so many problems is because they are always trying to rip someone off.
What's never shown in this free electricity demo is the voltage generated. I have not seen anybody measure the voltage with a multimeter to show the amount of electricity being produced. I still doubt the hacks for demonstration or entertainment show.
@BumbleBee Well LITTLE EINSTEIN.... All LAWS are written TO BE BROKEN!! Otherwise we wouldn't evolve!! Read about Karpen Pile.... still working after 53 years... Einstein was correct with one single LAW... Everything is relative..... But since ur so smart whats the outcome of this simple equation? 1 : 0 = ?
@@eduardhagiu9836 1. No. It can't. And if it COULD light even a 0.5 watt bulb, it would be the biggest scientific breakthrough of all time. But since this will not even spin ONE TIME under absolutely no load, it is a moot point.
@@eduardhagiu9836 1) No dipshit, laws are not meant to be broken. Otherwise crime would be celebrated. 2) That's a fucking battery 3) B-but all laws are meant to be broken! How can you even suggest that one thing might be absolutely true? 4) That's not an equation, that's a ratio.
The wooden base is supposed to look like a massive piece, but it seems, that it was glued together from two thin top and bottom layers, leaving the inside hollow. Enough space for a few batteries or a small lipo pack.
ITS NOT FAKE!, But it is not free energy. There is is energy stored in the magnets and that's where it comes from. The magnets are getting demagnetized as the device spins. Energy was required to magnetize the magnets at the factory and that is the energy being extracted. Think of the magnets as inflated balloons with stored compressed air. You can hook that up the balloon to an generator and draw power till the balloon deflates.
At exactly 2.50, you can see that the block of wood is not a solid block and the holes for the screw terminals are already pre-drilled, presumably with the batteries already inside and connected to the bottom of the pre-drilled holes.....the batteries power the motor and the bulb in parallel....
I have tried to make a magnet wheel a lot and have failed every time from cogging! Magnetic shielding isn't easy! I do believe that we've seen parendev style magnet wheels work if you do it right. It's just a tedious balance! Magnets like to flip and ruin your day so they have to be glued solid to the wheel! The rocking motion is key here if this works at all. How long is the spin?
It doesn't need any battery. Under the CD there's the same thing we found in wind turbine. 2m10 Kinetic energy (garenteed by magnets) is transformed into electricity
@@heinzpg ah, but you missed it, didn't you? The key is this: exciter... attractor....repeller. Slow down. Take a minute. Then think those three array sets have a twinned pole vertically. It attracts the positive pole then as it passes the negative array (the other half of the verticals) it REPELS IT. You had to notice him catching the proximity to set that. Relax man. Let your mind work. Anger only blocks your creativity. It's ok...took me a minute to see it. I've got an engineering degree. Hahahhahhahahah But that's they key. Finding that point where it can bypass at speed. Duck what some asshole mechanical engineer told you about the conservation of energy If you're a fucking dolt. Be a fucking dolt. If not...learning IS EARNING.
@@drewdemien481 Since I have an engineering degree myself (MSc in electrical engineering), no one has to tell me about conservation of energy. It is indeed a fundamental law of nature and about 100 years ago a proof was given (Noether-theorem), that our universe couldn't be stable without conservation of energy. Up to now no one was able to show a violation of this law. Exciter, attractor, repeller don't help, the arrangement in this video doesn't work, it is just one of the countless free-energy scams you can find in youtube. Fucking dolts are those who fall for such scams. Try to reproduce this arrangement and learn what you will get: definitely no energy.
@@EdLove Permanent magnets are not a source of energy, they only deliver what physicists call "potential energy". If a magnet attracts a piece of iron you gain energy. But to repeat this you have to pull the iron away from the magnet, which needs just the energy which was gained before. It is a similar situation with a spring. A compressed spring can deliver energy by expanding, but to repeat this you have to compress the spring again which again needs the energy you have gained. The overall explanation is conservation of energy. Energy can't be created or destroyed, it can only be transformed to other forms of energy. An e-motor transforms the electrical energy in mechanical energy and a little amount of heat energy. Input and output of energy is exactly the same. If this arrangement would deliver an output of energy, where is the equivalent input of energy? There is none.
@@surenbono6063 Actually, I don’t believe in perpetual motion or free energy. I just thought this example was particularly unimaginative, especially given the length of the video.
This is a proof of concept folks. It works! I built one with slightly different configuration but same concept. There is no hidden battery source. It's not free energy. It won't power your house but its probably producing a milliwatt of power. It's really a Pseudo Perpetual Motion Machine, I like to call it a PPMM or Psquared Msquared or even P^2M^2 . It is using the stored energy in the permanent magnets to rotate a motor. The rotating motor generates the voltage to light the bulb. If you have been an electronics hobbyist long enough or studied any electronics, you know the concept; Provide voltage to a motor/generator stator and it will spin a rotor . Spin a rotor and it will produce a voltage at the stator. The 3 floating magnets on these roller blade bearings are not supposed to rotate 360, but only a little. They are working just fine. They are used to attract or repel the approaching or retreating magnetic field of the magnets on the rotating disk. They are kinda like shock absorbers or else the rotor will cog (not continue rotating) If you notice, they simply attract the approaching magnet and then repel it as it passes, so it looks like they are in spasm. All you really need is one, but 3 works better. You can use more. A little more balancing and precision distancing and this thing will run very smooth. Again, it's a proof of concept. You need to give it a spin by hand to start the whole process, after that, it will run on it's own. The key will be to scale it. If you get enough mass on a flywheel and spool that baby up, and use strong but small neodymium magnets, you could probably generate close to a watt.
Take a close look at the base on which the components are mounted. It is not a factory product. It is thick and unevenly machined, suggesting that it is a made box. Inside are a battery or rechargeable battery with wires ending in contact plates, for example, and placed under screw holes. By screwing in the screws, contact is made and voltage is transferred to the motor. Note that before attaching / gluing the components, the screw holes are already made in the prepared / specified place. Screws wobble but the creator does not screw them in deeper, very gently handled. The voltage from the battery/battery is selected so that it is lower than the rated voltage of the motor operation. For example: if the motor is at 3V , the battery/battery has 1.5V. Such voltage is too small to start the motor at once, but if you "push" it manually it will start to rotate.
Solo hay un pequeño detalle, elmotor que utiliza, tiene incorporado un regulador de velocidad entre el cable rojo y la terminal positiva del motor, por lo cual no puede estar generando corriente de la forma que muestrta,.
Pero sabes que pasa jajaja "Supongamos" que gira bueh ahora bien, ustedes piensan que ese motorsito genera lo suficiente como para encender un filamento? Jajaja si hubiera puesto LED podría haber sido más creíble...
@@FERNANDO9797 disculpa por q me aparece ami tu respuesta? A caso yo afirme q eso funciona? Ni me acuerdo haberlo visto ahora voy a ver nuevamente el video
What are you suggesting... that there's some kind of magical power supplying unit hidden inside the base of this obviously legitimately functioning system? You really think that a nuclear reactor can fit in the base of this machine? That's just stupid... and the fact that you hold that position just means you're dumb... Just leave the smart stuff to people like us, and you go outside and play... and don't forget your helmet!
Батарейки с тратилом. 😅😅😅 Аферисты крутят. Он как Чёрный Таракан и часто по сторонам смотрит. Лайки идут хорошо. Люди в комментариях как на войне нападают зомби.
Okay, lets break this down. First off all, when making a video to show free energy setups, you have to show ALL the parts, front back, side and what not. I do not recall seeing the platform shown underside or anything. Since 97 percent of the components are being glued down to the platform, and only the 2 screw screwed in, which in this case all u need is literally just the top layer of the platform, why is the platform so thick?? Anyone else would have just used a single ply, or even a plastic equivalent base. With how suspiciously thick that platform is, it screams hidden battery back, wired to the tips of those screws underneath to power the the motor. Id like to see this exact build done with just a single ply base. And heck, you dont need to use screws even, literally can glue down the wires with a bead of hot glue after hot gluing the motor, and still touch the wires to the bulb same way, or use some alligator clips, or solder it on ahead of time before assembling. Use can do the whole thing on the table top itself. No base or platform needed. If the results can be replicated after that (which it wont, cuzz just using magnets will not produce a consistent 1 way directional rotation of the disc) cuzz 2 many variables of magnetic poles shifting, as you have the array of magnets on the disc for 1 being in a fixed angle where each of the 3 swiveling magnets will push and pull both equal and unequal force as each fixed magnets north pole and south poles will push and pull snapping them out of any consistent rotational movement. You may get maybe a turn if that at all even, before one side will snap back, breaking rotational direction, and the others will follow as the snap back will lock it in. it would be even more obvious if the 3 side magnets where fixed and not swiveling. U wont even get a turn before snapping. Even after applying current to the motor, the magnets will hold the disc in place, (which is whats happening before he gave it a spin, before the motor takes over) if there was no current applied to the motor and if u do give it a spin, the disc will snap each one untill slows down and locks the poles attraction. Magnets simple dont have the ability to generate the variable fluctuations that are generated by the flow of current in a motor at the windings, by itself. It needs the applied current to do so, hence why electric motors still exist. Since the time Magnets have been discovered, you dont think this exact experiment was done easily in the 1000s of times by kids and adults? Heck ive done it, and numerous other variations when i was in my teens in the 90s, before learning and understanding the principles and laws of mechanics and physics. The governing rules of mathematics when applied to everything in existence. Its a great start as an experiment if done in that form, but not as a rigged experiment for the purposes of youtube. Thats the only reason i felt having to break this down. Too many easily convincible and gullible beings out there to fall for it, and not question it, or know what to ask, this would perpetuate understanding the fundamental principles that govern in our universe. With that said, scientific proof needs to be provided, so replicating this exact outcome result of powering up the light bulb, using same principal setup while being transparent all the way is the primary responsibility, which falls on the one that generated the claim, which is what the video is. Claiming free energy, by trying to show proof, but proof is not thoroughly covered. And if any one at all, replicates whats shown in the video, will not be able to duplicate the exact result, and that is the one thing you want to happen, as you made the claim of being able to produce a set given result. And the fact that no one will be able to do that same after watching this alone, defeats the whole purpose of you even making this video. Its not gonna get u overnight viral gain, uptick on new subs, or view / like ratio analytics. HONESTY in scientific experiments is the only way, anything else will be easily debunked and disproved. "Extraordinary Claims Requires Extraordinary Proof". If free energy was this easy, school kids would have stumbled upon this countless times during high school science project builds. And yet we've built quantum computers, reusable rockets, on the brink of General A.I. but completely skipped over magnets on discs? Come on now. This breaks both the first and second laws of thermodynamics!! Look up entropy in thermodynamics and learn one of the governing laws of the physical world, that all things have to follow.
I don't understand the comment. Many people, saying they are "scientists" just mocking the video. Science does not work like that. It's an easy build, just build it and post a counter video showing that it does not work, that's all. Otherwise it seems more like "faith" (or fundamentalism) than science...
No. El ke yo hice es similar y trabaja. Si no lo intentas, jamás encontrarás las baterías. El mío usa magnetos de los headphones, tienen un hoyo en el centro y los puse de frente. El otro es como una polea con 8 magnétos dos por sección. Después de muchos intentos el poste donde Iva la polea magnética, tiene ke estar desvalanceada. Jiró tan rápido ke se elevó la polea y se salió de su eje. Los motores magnéticos si son reales. Pero estarías amenazando a las compañías petroleras, de electricidad, y muchas otras cosas. Tu vida no valdría ni un cacahuete. A los ke lo an logrado en carros, están bajo tierra.
Meine Frage! Was für einen Magnet oder Elektro Motor kann ich kaufen um es auszuprobieren oder aus welchem Elektro Gerät kann es ausbauen? Und wo kann diese kleinen Magneten kaufen und wie nennt man die? Ich bin so dankbar dass es Menschen wie sie gibt. Ehrenmann ❤💡
I drew a fairly similar design a few years back but instead of using a Disk that spins it uses maglev to get rid of any friction and uses a better shape than a disk, the problem there is that there is no friction so a new method is needed to harvest energy
It's obvious that the "plywood" is hollowed out with a thin layer on top. You can tell by how loose the screws are because they wiggle around quite a bit when he connects the light bulb. The screws move because the wood they are screwed into is very thin.
Da wird in der Holzplatte doch nicht etwa eine Batterie drin sein? Die obere Platte des Leimholzes ist sauber angefast und die beiden Schraubenlöcher sind ja schon vorgebohrt und schließen den Kontakt zum Motor.
It seems that it will not be so easy. If I had the chance, the first thing I would do, would be to cool all the components, including the magnets, to near absolute zero to calm down the wild conditions in the electron envelope of the atom. In this way, they get different properties from the magnetic point of view. It's the topic for many experiments, including levitation, but I'm thinking mainly Hall effect, which in normal temperature works only on a thin layer of material, but superconductivity can change this situation dramatically. Otherwise, it might be worth trying to oscillate a superconducting magnet by simply passing an alternating current at a special or, say, resonant frequency to create an alternating magnetic field. Have a successful hunt. R kalvoda fyzika naruby.
You are a very intelligent guy ...if you could tell a man how to harness the power to educate himself ...the power of the mind that is ...what would you recommend the beginning of his thoughts be ... or how to begin to constructively educate yourself ..on a level where it all comes together to form an exponential rate of growth through synchronicity enhancement in the pattern of learning that naturally make learning a process where we subconsciously take in knowledge into our memory banks through a neural network of information that has us learning at a rate of comparison to the Phrase doing more than on thing at a time .. we have the ability ..some never took a typing lesson though we automatically stay one step ahead of that keyboard as to seemingly already know where the next character in your mind is located as you compose your thoughts.
Contrary to popular belief: You can take a normal wooden box and put a normal battery in it and the whole thing magically transforms into a wooden box with a hidden battery. Einstein discovered this when he was trying to find a way to make his weed invisible.
Aici nu e vorba numai de baterie ascunsa. O poate invarti si cu autosuflanta. Sufla cu aer si se invarte. Daca observati,atunci cand pune becul,discul cu magneti are aceeasi turatie. Ar trebui sa fie o franare.
Y'know, it's not that I don't *WANT* this to actually work. It's that I know there's no such thing as free energy. Gotta admit, it's a cool concept. I wish this was real.
@@MrHakuro ..if you want to it will..it's all in the mind...you gotta work it out..if I prove it can work at night what will I get for it...?..there is light that can grow plants 24/7 indoor..
If a free way to produce electricity is ever discovered it will be buried very quickly My thinking is like this producing electricity isnt difficult producing it in a manner that doesnt use power from some other source is impossible So that leads me to think That solar is where we should be looking
Even if this did work (it doesn't), the energy required to make just one of those nuts used to get it running would require that 'generator' to run for thousands of years.
And nobody ever thought of that. Incredible! (battery is under the unnecessarily thick base, wires are hidden under the motor or power is supplied through the nails)
Its real. Ive been trying to tell people about this for years its free energy, its missing the magnetic gyro though. Build this with a magnetic gyro strong and you wont need batteries in an electric car you can just always generate the energy like this 24/7 and only use the energy when you want to. This is a crap build but with a magnetic gyro and alot more magnets this works. Its a brushless electric motor with backwards physics basically so the motor gives the energy instead of taking it. 1 backwards motor and 1 normal electric motor together make unlimited travel for a car or unlimited power for a room/house. A brushless motor can be turned into a generator by replacing the magnets with opposite polarity so when the engine spins its making electrons not eating then. (magnetic gyro in the middle is the key) Maybe even making a normal brushless spin backwards would get the same results if it can handle being a conductor of its own energy.
this motor that is under the disk with the magnets, it even generates energy in pulsating direct current, but the regulator plate that is right below where he soldered the black and red wires, it is the regulator circuit that adjusts the speed and it does not allow that the current returns from the motor to the terminals, just enter the motor already regulated, so for that to work it needed an external 6a 12v source but it doesn't show that. And this source has to feed the motor plus the lamp. I'm not saying magnetic energy is impossible but that's not how it's done. the secret is in a super efficient generator.
Two magnet repels only halfway it length. The other halfway it must attract. You. May succeed if you can remodel the flu path. But remember. Fluxes prefers path with least resistance. In order to conserve its energy.
Unfortunately for the sleepers magnets have always played a massive roll in energy on this planet way before this reset. So it does and will work despite what your programming makes you spew out
Fortunately for the "sleepers" the prediction of physicists, that permanent magnets alone can not produce any energy, stands still unchallenged. What is shown in the video is obviously a scam. No "inventor" has ever agreed to allow an inspection of his construction by experts. Why? Because all running magnet motors are scams.
Not to be a negative Nelle but I would like to see a wide shot, to see if there is a hair dryer blowing on the CD wind mill. The magnets on the CD look like a lot like wind vanes.
Free and infinite energy does not exist. The magnetic wheel will stop after a few seconds due to magnetic and mechanical losses. We always find this kind of tutorial on the internet, but it's a fantasy, not reality.
i just made that with a 6 volt bicycle dynamo and used wooden dowels for the bearing magnnet holders ,and when i spin it up all three of the magnets on the dowels turn in a 360 degrees actually propelling the cd at too fast a speed that it want to warp ,so im going to double or triple the cds or use a thick wood
@@steveswhirld зачем ты врешь ? Любой объект помещенный в магнитное поле находит точку пакоя в зоне магнитной ямы , магнитная яма будет всегда между двумя магнитными палями , мсила и направления магнитного поля значения не имеет , магнит всегда будет иметь магнитную яму в которой удерживается твоя движущаяся система ... ответь , зачем и почему ты говоришь ложь ?
O projeto em si já é uma mentira, aí o cara coloca uma lâmpada incandescente pra acender, mesmo sabendo que esse motor não tem amperagem suficiente pra isso 🤣🤣 se tivesse usado um Led ficaria bem mais real. Sinop MT Brasil
il trucco sta nel fatto che non si sa cosa c'è dentro o sotto la tavoletta di legno. Penso non sia un caso che i fori per inserire le viti siano già realizzati nella tavoletta prima che inizia il video. Penso che le viti una volta inseriti tocchino i poli di una batteria che sta dentro o sotto la tavoletta.
ehh....man....i think you can make that thing pretty powerful...make those magnets a little longer on the axl contact areas, not deeper....and move the exterior magnets in and out for acceleration... tell them your firm needs 10% to 30%.... your awsome....
Just don't make it free energy doesn't exist and these generators will never work. Please consider doing something better than wasting time on fake stuff
Every free energy device uses hot glue. That's where the power comes from. You can dispense with the magnets and use only the hot melt glue. You need good quality glue to get decent results.
From an engineering point of view... Assuming that this thing has no battery and is running just on pure magnetism, it will eventually come to a halt since there will be energy losses (mechanical losses due to friction, etc) that even the force of attraction between the magnets cannot overcome. But nice try anyway.
I know there's a battery below, but why doesn't this work? If you blow air to the tilted magnets it will rotate because of the pushing force. But why does the pushing force of two magnets not work? 🤔🤔
YESSS this man saved the earth energy problem!! He is becoming the richest man on earth! But not with generating energy, but with youtube views. Unfortunately not from me, because i have an ad-blocker!
Can you arrange the experiment again on the surface of a thin cardboard or wooden plank so that no one doubts that a power pack is hidden underneath the base?
@@common1529 -- wait until he discovers narrow lengths of flex-circuit salvaged from an old tablet's battery, then superglues them to the bottom, and paints over them. I say take away his superglue, hot-melt glue, and wood screws. THEN let's see what he can do! :) The _real_ tragedy of this absurd comedy is that anyone actually _believes_ this guy's nonsense!
any free electric device must be fake, "free electricity" violates the principle that energy cannot be created or destroyed, only transfered. The most difficult thing to accomplish with free energy devices, is to figure out where to hide the battery
The device is clearly a free energy device - The answer is simple - the battery was a free gift from the inventor's birth person ( mother in pre-woke days)
OK since the basic design is now created add a magnetic gyro to the center and watch what happens. Seriously try this itll be the biggest power source youll ever see if you can make it strong enough to stay together.
The most difficult thing to accomplish with free energy devices, is to hide the battery.
Ah ah ah 👍
Why is it that only doubters spend all day looking at free energy videos just to post their predictably dumb opinions?
@@oriraykai3610 Firstly, there is no doubt. There is no such thing as a free energy device or perpetuum mobile. The laws of physics simply don't allow that sort of thing.
Secondly, it's fun to watch people who are trying to fool or entertain people. It's like watching a magic show. There is no such thing as magic. Everybody knows that. It's about the entertainment. It's the "how the heck did he do it" effect.
And.... I'm not looking all day long for these videos. I stumble across them while I research important things like cats falling off a table or checking out Two Minute Papers for interesting new advances in AI learning environments.
In this case it's not batteries, It's replacing ambient sound with technocrap music so you can't hear the fan making it spin like a windmill.
@@Blubb5000 Let me correct you a little. The laws of physics KNOWN TO MAN do not allow that sort of thing :)
This will work really well until the battery runs out, The battery which is inside the wooden block!
So it is! Magnetic Motors are always Fake, due to STICKY POINT!
It works, but only with a ASUS CD-Rom 😃
dont be noob, it really works
No battery inside . You can see it being made . They show you under the disc just before they spin it on a continuous video shot . The wires to the motor were as they were , no change. The only question is, how long does it spin for .
@@kunglholepcha8158
guess what
free energy is a lie.
Coincidentally, the base is just thick enough to hide a battery.
The music makes the energy feel more free.. It really gets my free electricity vibes going. Without the music the battery in the base would seem expensive.
I made something similar to this, but had to use some magnet shielding to block parts of the magnet so it continues to spin.
@@RockG.o.d and it worked ?
@@archibald5777 worked until I tried to generate power, then it came to a stop.
@@RockG.o.d did you try to connect a alternator to it or why did it stop ? Could you tell a bit more about it ?
@@archibald5777 when you complete the circuit, the wires and motor generate their own magnetic field and increases the resistance of it spinning in a certain direction. i'd assume is why cuz these kinds of motors operate on creating a magnetic field in the copper coil inside of it which spins it's iron casing.
You didn't show the wires connected to a battery that's connected to the screws under the block of wood.
he must at least show the block of wood he used on all sides to prove authenticity
even when we apply load on generator the effect low the RPM... but wow in your case it is still rotating with same RPM... Good Battery.
agree
Yes
I remember this CD used to be a great problem solver for audio driver issues in those days.
LOL🤣
DVD, not CD :)
Now it is a literal problem solver
@@extramiletvesonucc.2892 Yeahehe 😂 righjt
@@KHos73 No its a cd don't just read and say it 😂
Works more efficiently if you use an acdc CD
underrated comment
I think that if you switched the two wires the DC motor might run in the other direction, at least until the battery in the wood box runs down.
IF there is a Nobel prize for cheating, this 'free energy" guy must get it.IF there is a Nobel prize for being dumb, those who "liked" this video must get it.That include TH-cam too which gives this hack a platform to cheat.
I would give all a Nobel Prize just for breathing under the sun. IF u don't have any knowledge of Physics shut the fuck up!
@@eduardhagiu9836 yes that actually violates Conservation of energy and Physics
@@chaosminecraft3399 since i hope ur online what the answer to this simple equation? 1:0=
@@eduardhagiu9836 Sure. 1:0=0 or 1 and that is the easiest calculation you thrown to me.
The trick is that you don't know what's inside or under the wooden tablet. I think it is no coincidence that the holes to insert the screws are already made in the tablet before the video starts. I think that once inserted the screws touch the poles of a battery that is inside or under the tablet.
Your statement is silly because spinning a motor “does” create electricity . This is not in question . Also the amount of electricity produced is not important for the sake of experiment . The questionable part of this is the creation of a continuously spinning disc with no apparent source of input energy . How long will the disc continue to spin if left alone ?
@@sobeit1927 The answer ist: Until the battery that is hidden in the wooden base and drives the motor is empty?
@@sobeit1927 Are you saying that the arrangement of those magnets propel the disc? That would never work and you know it, you charlatan. These videos are bollocks and you should be locked up.
it's always interesting to try to figure out how the scam works😎
@@myname5713 In this case, it's too easy ;)
The amount of energy it generates can't be more than the potential energy from the magnets. The amount of force to break the lock up point is equal to the force the magnets produce. The ball is at the opening of the horseshoe shaped magnetic field the 3 magnets are making. It would have to produce a lot more force still, to overcome resistance factors in the generator parts, bearings, air, etc
its a fake
the conductor is in the dead middle of the magnetic Field
@@masono5650 Ja, Ja ni judas le gana
Add a fly wheel
Light bulb must be soldered on these two volts, then he should show that bulb turns off when he stop disk.
Keep up the great work! Please let me know how long it will continue to spin and what battery you housed inside the base. Is it rechargeable? I'm going to build one of these so I can spoof my friends.
Make sure the friend you try to spoof has a very low IQ or it won’t work
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣👍👍👍👍👍👍👍👍👍
Если сделать основание из тонкого прозрачного оргстекла, работать перестанет.
А чтобы вновь заработало, нужно будет основание залепить синей изолентой :)))
@@Favorite6233 видно что фейк
Дырочки под контакты заранее размечены!
Вот именно..Если бы такая схема работала бы.То уже давно бы выкинули на помойку Ветрогенераторы и ГЭС ))
Оно то и понятно что фейк. Но конструкция говно. Настоящий ВД это тот, где фиг догадаешься куда батарейку впихнули.
100 % energy from outside. . .compressed Air Flow, Elektromagnets under the Table. Hidden cables...small batteries in the wood.
100% FAKE..
Очень полезное видео, тоже сделал себе такой генератор только из автомобильного колеса, запитал целую деревню, теперь жители платят мне за електроэнергию, я теперт милиионер.
Mentira, V4G4BUND0
Thanks for your tip, I took a pot lid instead of a CD. And I'm currently producing electricity for the whole neighborhood.
More Info Please, I'm was thinking manhole covers, or old sattelite dishes for the magnet carriers.
love it hahahaha... oh my word
i have a patent on this invention over 14 years ago istarted inventing, i was in prison illegally they almost pulled it off do you wanna talk???
@@EddieRocketpepper I laughed out loud!
I think the best way to prove it works or doesn't work, is to keep the video running and slow the disk to a stop, while the light is connected. If there's a battery, the light will stay on. If not, the light will go out.
If he's clever, he connected the battery to the motor, not to the bulb, so when the disc is stopped, the bulb witll turn off.
I use this device to power my home.
It's very cold and dark here...
There's no way this could generate enough power to run your house. Are you converting it to a larger motor or something? I'm just trying to learn. Thinking of ways to power my house
@@corbinbrown1587 Just think about the two sentences I wrote for a while...
"I use this device to power my home"
"It's very cold and dark here"
@@jonnekallu1627 😂😂 I hoped that was pre-tense
Saw someone make something similar to this on the fly with some card stock, a plastic straw and tape. He built a wheel and lined the outside of it with the magnets with a gap. He said the gap was the key to it working and only needed to use one external magnet to get it moving.
I've seen these done with a base where there's nowhere to hide a battery. Turned out there was an air compressor blowing air onto one side & making it spin.
He really worked hard on this. 😂 You got to realize that the reason the people in these countries have so many problems is because they are always trying to rip someone off.
Spot on.
i have a patent on this invention over 14 years ago istarted inventing, i was in prison illegally they almost pulled it off do you wanna talk???
@@EddieRocketpepper Bullshit
Wow! I can't believe no one ever thought to put magnets in a circle before!
why do you think we dont have magnet energy plants instead of nuclear ? because that shit in the video has a hidden battery
They did it was called the surge car and the government killed him
Wow free energy ! How?
You must be getting the knobby prize for this… is this true ?
Tried something similar 45 years ago .lot of fun. But steady magnetic fields don't create energy. Yes I am 70
Would the magnets spin without the battery? Is the battery only needed to power the light?
It actually works.. but we have to edit this project little bit by adding battery and connecting to screw from base
No sound track. COMPRESSED AIR being blown onto disk, causing magnets on disk to act as turbine blades.
利用同性相斥的原理，促使中間轉盤轉動，由馬達內線圈產生磁力場，透過佛來明定律產生電能。
What's never shown in this free electricity demo is the voltage generated. I have not seen anybody measure the voltage with a multimeter to show the amount of electricity being produced. I still doubt the hacks for demonstration or entertainment show.
well if u were smart enough u would see its a car bulb which means is under 12 volts and i guess around 10 watts. It maybe can lit a 5w Led bulb
Judging by the space between the screws I would think the voltage produced would be about 9 volts.
@BumbleBee Well LITTLE EINSTEIN.... All LAWS are written TO BE BROKEN!! Otherwise we wouldn't evolve!! Read about Karpen Pile.... still working after 53 years... Einstein was correct with one single LAW... Everything is relative..... But since ur so smart whats the outcome of this simple equation? 1 : 0 = ?
@@eduardhagiu9836 1. No. It can't. And if it COULD light even a 0.5 watt bulb, it would be the biggest scientific breakthrough of all time. But since this will not even spin ONE TIME under absolutely no load, it is a moot point.
@@eduardhagiu9836 1) No dipshit, laws are not meant to be broken. Otherwise crime would be celebrated. 2) That's a fucking battery 3) B-but all laws are meant to be broken! How can you even suggest that one thing might be absolutely true? 4) That's not an equation, that's a ratio.
The wooden base is supposed to look like a massive piece, but it seems, that it was glued together from two thin top and bottom layers, leaving the inside hollow. Enough space for a few batteries or a small lipo pack.
Why not a thin clear plexiglass base instead of a thick wood base? Im sure there's nothing to hide in there though.
Just place the device on a glass table with a camera above and below and solder the light to the terminals and show it running for 2 hours.
That you'll never see on any of these videos
he is using compressed air to run this thing I guess
Yep - needs to be connected to a plastic base too. Hollowing out a thick piece of wood like that to hide a 9v battery would be trivial.
they can still use a compressed air blower
ITS NOT FAKE!, But it is not free energy. There is is energy stored in the magnets and that's where it comes from. The magnets are getting demagnetized as the device spins. Energy was required to magnetize the magnets at the factory and that is the energy being extracted. Think of the magnets as inflated balloons with stored compressed air. You can hook that up the balloon to an generator and draw power till the balloon deflates.
At exactly 2.50, you can see that the block of wood is not a solid block and the holes for the screw terminals are already pre-drilled, presumably with the batteries already inside and connected to the bottom of the pre-drilled holes.....the batteries power the motor and the bulb in parallel....
I have tried to make a magnet wheel a lot and have failed every time from cogging! Magnetic shielding isn't easy! I do believe that we've seen parendev style magnet wheels work if you do it right. It's just a tedious balance! Magnets like to flip and ruin your day so they have to be glued solid to the wheel! The rocking motion is key here if this works at all. How long is the spin?
Not difficult to hide the battery, it's within the laminated base board.
It doesn't need any battery. Under the CD there's the same thing we found in wind turbine. 2m10
Kinetic energy (garenteed by magnets) is transformed into electricity
Why would he hide a battery? the point is to try to get it to work.
Not fool anyone.
That is just an assumption. You have no proof.
That's very cool.
I can see how the instability kicks it past the poles wanting to cling.
That's very very fucking cool.
This is not fucking cool but a fucking scam. Permanent mangets alone can not drive anything.
@@heinzpg ah, but you missed it, didn't you?
The key is this: exciter... attractor....repeller.
Slow down.
Take a minute.
Then think those three array sets have a twinned pole vertically.
It attracts the positive pole then as it passes the negative array (the other half of the verticals) it REPELS IT.
You had to notice him catching the proximity to set that.
Relax man.
Let your mind work.
Anger only blocks your creativity.
It's ok...took me a minute to see it.
I've got an engineering degree.
Hahahhahhahahah
But that's they key.
Finding that point where it can bypass at speed.
Duck what some asshole mechanical engineer told you about the conservation of energy
If you're a fucking dolt.
Be a fucking dolt.
If not...learning IS EARNING.
@@drewdemien481 Since I have an engineering degree myself (MSc in electrical engineering), no one has to tell me about conservation of energy. It is indeed a fundamental law of nature and about 100 years ago a proof was given (Noether-theorem), that our universe couldn't be stable without conservation of energy. Up to now no one was able to show a violation of this law. Exciter, attractor, repeller don't help, the arrangement in this video doesn't work, it is just one of the countless free-energy scams you can find in youtube.
Fucking dolts are those who fall for such scams. Try to reproduce this arrangement and learn what you will get: definitely no energy.
Why not? I'm not saying they can, I'm just curious.
@@EdLove Permanent magnets are not a source of energy, they only deliver what physicists call "potential energy". If a magnet attracts a piece of iron you gain energy. But to repeat this you have to pull the iron away from the magnet, which needs just the energy which was gained before. It is a similar situation with a spring. A compressed spring can deliver energy by expanding, but to repeat this you have to compress the spring again which again needs the energy you have gained.
The overall explanation is conservation of energy. Energy can't be created or destroyed, it can only be transformed to other forms of energy. An e-motor transforms the electrical energy in mechanical energy and a little amount of heat energy. Input and output of energy is exactly the same. If this arrangement would deliver an output of energy, where is the equivalent input of energy? There is none.
Amazing how you suspended and resistance and friction. Just eliminate gravity and you’ll have something.
Sir please mention name of the products you use in experiment
Very nice wood base. I wonder what is in it
I have to admit, I was a little skeptical at first. But when he added the three magnets with bearings that don't turn, that made me a believer.
..but are you certain of it..?
@@surenbono6063 No, it's sarcasm.
@@williamyoung3253 ... What does sarcasm mean...is it like a circus..
@@surenbono6063 Actually, I don’t believe in perpetual motion or free energy. I just thought this example was particularly unimaginative, especially given the length of the video.
@@williamyoung3253 ... believe me ..me too...I'm just suggesting what else works..
This is a proof of concept folks. It works! I built one with slightly different configuration but same concept. There is no hidden battery source. It's not free energy. It won't power your house but its probably producing a milliwatt of power. It's really a Pseudo Perpetual Motion Machine, I like to call it a PPMM or Psquared Msquared or even P^2M^2 . It is using the stored energy in the permanent magnets to rotate a motor. The rotating motor generates the voltage to light the bulb. If you have been an electronics hobbyist long enough or studied any electronics, you know the concept; Provide voltage to a motor/generator stator and it will spin a rotor . Spin a rotor and it will produce a voltage at the stator. The 3 floating magnets on these roller blade bearings are not supposed to rotate 360, but only a little. They are working just fine. They are used to attract or repel the approaching or retreating magnetic field of the magnets on the rotating disk. They are kinda like shock absorbers or else the rotor will cog (not continue rotating) If you notice, they simply attract the approaching magnet and then repel it as it passes, so it looks like they are in spasm. All you really need is one, but 3 works better. You can use more. A little more balancing and precision distancing and this thing will run very smooth. Again, it's a proof of concept. You need to give it a spin by hand to start the whole process, after that, it will run on it's own. The key will be to scale it. If you get enough mass on a flywheel and spool that baby up, and use strong but small neodymium magnets, you could probably generate close to a watt.
Take a close look at the base on which the components are mounted. It is not a factory product. It is thick and unevenly machined, suggesting that it is a made box. Inside are a battery or rechargeable battery with wires ending in contact plates, for example, and placed under screw holes. By screwing in the screws, contact is made and voltage is transferred to the motor. Note that before attaching / gluing the components, the screw holes are already made in the prepared / specified place. Screws wobble but the creator does not screw them in deeper, very gently handled. The voltage from the battery/battery is selected so that it is lower than the rated voltage of the motor operation. For example: if the motor is at 3V , the battery/battery has 1.5V. Such voltage is too small to start the motor at once, but if you "push" it manually it will start to rotate.
Solo hay un pequeño detalle, elmotor que utiliza, tiene incorporado un regulador de velocidad entre el cable rojo y la terminal positiva del motor, por lo cual no puede estar generando corriente de la forma que muestrta,.
Pero sabes que pasa jajaja "Supongamos" que gira bueh ahora bien, ustedes piensan que ese motorsito genera lo suficiente como para encender un filamento? Jajaja si hubiera puesto LED podría haber sido más creíble...
Ese tamaño de motor es regulado al voltaje ke se diseñó. No es corriente alterna.
@@danielgiaco1963 ni aunque saques el foco giraria , hay una pila adentro de la caja, si giraria ya todos tendriamos uno grande en la casa jaja
@@FERNANDO9797 disculpa por q me aparece ami tu respuesta? A caso yo afirme q eso funciona? Ni me acuerdo haberlo visto ahora voy a ver nuevamente el video
@@FERNANDO9797 ah jajaja sii había un comentario mío... Pero mi comentario es negativo para el video jeje
good night.
that used engine is an engine or a dynamo?
well done I did the same thing and I managed to get 10KW out of it ....
That's an interesting base, looks almost like a box... wonder what could be inside? 🤔🤨
What are you suggesting... that there's some kind of magical power supplying unit hidden inside the base of this obviously legitimately functioning system? You really think that a nuclear reactor can fit in the base of this machine? That's just stupid... and the fact that you hold that position just means you're dumb... Just leave the smart stuff to people like us, and you go outside and play... and don't forget your helmet!
Батарейки с тратилом. 😅😅😅 Аферисты крутят. Он как Чёрный Таракан и часто по сторонам смотрит. Лайки идут хорошо. Люди в комментариях как на войне нападают зомби.
Okay, lets break this down. First off all, when making a video to show free energy setups, you have to show ALL the parts, front back, side and what not. I do not recall seeing the platform shown underside or anything. Since 97 percent of the components are being glued down to the platform, and only the 2 screw screwed in, which in this case all u need is literally just the top layer of the platform, why is the platform so thick?? Anyone else would have just used a single ply, or even a plastic equivalent base. With how suspiciously thick that platform is, it screams hidden battery back, wired to the tips of those screws underneath to power the the motor.
Id like to see this exact build done with just a single ply base. And heck, you dont need to use screws even, literally can glue down the wires with a bead of hot glue after hot gluing the motor, and still touch the wires to the bulb same way, or use some alligator clips, or solder it on ahead of time before assembling. Use can do the whole thing on the table top itself. No base or platform needed. If the results can be replicated after that (which it wont, cuzz just using magnets will not produce a consistent 1 way directional rotation of the disc) cuzz 2 many variables of magnetic poles shifting, as you have the array of magnets on the disc for 1 being in a fixed angle where each of the 3 swiveling magnets will push and pull both equal and unequal force as each fixed magnets north pole and south poles will push and pull snapping them out of any consistent rotational movement. You may get maybe a turn if that at all even, before one side will snap back, breaking rotational direction, and the others will follow as the snap back will lock it in. it would be even more obvious if the 3 side magnets where fixed and not swiveling. U wont even get a turn before snapping.
Even after applying current to the motor, the magnets will hold the disc in place, (which is whats happening before he gave it a spin, before the motor takes over) if there was no current applied to the motor and if u do give it a spin, the disc will snap each one untill slows down and locks the poles attraction. Magnets simple dont have the ability to generate the variable fluctuations that are generated by the flow of current in a motor at the windings, by itself. It needs the applied current to do so, hence why electric motors still exist.
Since the time Magnets have been discovered, you dont think this exact experiment was done easily in the 1000s of times by kids and adults? Heck ive done it, and numerous other variations when i was in my teens in the 90s, before learning and understanding the principles and laws of mechanics and physics. The governing rules of mathematics when applied to everything in existence.
Its a great start as an experiment if done in that form, but not as a rigged experiment for the purposes of youtube. Thats the only reason i felt having to break this down. Too many easily convincible and gullible beings out there to fall for it, and not question it, or know what to ask, this would perpetuate understanding the fundamental principles that govern in our universe. With that said, scientific proof needs to be provided, so replicating this exact outcome result of powering up the light bulb, using same principal setup while being transparent all the way is the primary responsibility, which falls on the one that generated the claim, which is what the video is.
Claiming free energy, by trying to show proof, but proof is not thoroughly covered. And if any one at all, replicates whats shown in the video, will not be able to duplicate the exact result, and that is the one thing you want to happen, as you made the claim of being able to produce a set given result. And the fact that no one will be able to do that same after watching this alone, defeats the whole purpose of you even making this video. Its not gonna get u overnight viral gain, uptick on new subs, or view / like ratio analytics. HONESTY in scientific experiments is the only way, anything else will be easily debunked and disproved.
"Extraordinary Claims Requires Extraordinary Proof".
If free energy was this easy, school kids would have stumbled upon this countless times during high school science project builds. And yet we've built quantum computers, reusable rockets, on the brink of General A.I. but completely skipped over magnets on discs? Come on now.
This breaks both the first and second laws of thermodynamics!! Look up entropy in thermodynamics and learn one of the governing laws of the physical world, that all things have to follow.
Well said...
This post is the GOAT and nothing else is required. Move along internet, nothing else to see here...
I made one of these that floated on a magnetic field. I recommend it.
thks, I wasn't sure if I should do this for my science project but know that I found someone that successfully done it I feel confident.
@@goncalobicho9928 probably too late now
I don't understand the comment. Many people, saying they are "scientists" just mocking the video.
Science does not work like that. It's an easy build, just build it and post a counter video showing that it does not work, that's all.
Otherwise it seems more like "faith" (or fundamentalism) than science...
love how he puts 2020 as if its a glitch in the system that will get patched
Los tornillos conectan con la batería que está dentro del bloque de madera 😅
No. El ke yo hice es similar y trabaja. Si no lo intentas, jamás encontrarás las baterías. El mío usa magnetos de los headphones, tienen un hoyo en el centro y los puse de frente. El otro es como una polea con 8 magnétos dos por sección. Después de muchos intentos el poste donde Iva la polea magnética, tiene ke estar desvalanceada. Jiró tan rápido ke se elevó la polea y se salió de su eje. Los motores magnéticos si son reales. Pero estarías amenazando a las compañías petroleras, de electricidad, y muchas otras cosas. Tu vida no valdría ni un cacahuete. A los ke lo an logrado en carros, están bajo tierra.
How did you install the disc batteries in the wood ?
There is no batteries.
@@tepansenteolt2980 right, there is a compressed air blower tho
Meine Frage! Was für einen Magnet oder Elektro Motor kann ich kaufen um es auszuprobieren oder aus welchem Elektro Gerät kann es ausbauen? Und wo kann diese kleinen Magneten kaufen und wie nennt man die? Ich bin so dankbar dass es Menschen wie sie gibt. Ehrenmann ❤💡
This is just as good as the guy who used one cord in a loop and attached a lightbulb to power it.
Deve ter sido difícil abrir um espaço nessa madeira grossa pra esconder as baterias por baixo dela.
Parece hueca la caja no maciza
Wow...I want to make one.....where can I get the Asus intel G41 chipset disc?
awesome answer my friend ;-)
maybe from your brother or friends computer
Me too... I guess I'm out of luck, can't find it. Maybe some day though...
Just wanted to show my appreciation for your humor. That's the kind of comment I make to most things. Ty for you being you.
@@davidmckay9558 Thanks for appreciating my humour!
The batteries are inside the wooden box, power comes up through those screws.
I drew a fairly similar design a few years back but instead of using a Disk that spins it uses maglev to get rid of any friction and uses a better shape than a disk, the problem there is that there is no friction so a new method is needed to harvest energy
Bullshit there is no energy to harvest in the first place you daytime dreamer.
Light bulb must be soldered on these two volts, then he should show that bulb turns off when he stop disk.
Đồ bỏ đi
I'm curious at what frequency it maxes out at, so the energy supplied by those permanent magnets can be measured.
No despegan de la forma de cajita con pilas abajo...buen intento
are you for real ?
You can measure the energy right now. Zero.
Are the magnets on the disk arranged ns ns ns ns etc or ns sn ns sn etc?
nice question!!!!
@@trecelluviateoxihuitl5382 поставь магниты так - фейк/фейк/фейк/фейк/фейк/фейк/фейк/фейк/фейк/фейк/фейк/фейк/фейк/фейк/фейк/фейк/фейк/фейк/фейк/фейк
They are arranged to catch the wind, like a turbine.
It's obvious that the "plywood" is hollowed out with a thin layer on top. You can tell by how loose the screws are because they wiggle around quite a bit when he connects the light bulb. The screws move because the wood they are screwed into is very thin.
Da wird in der Holzplatte doch nicht etwa eine Batterie drin sein? Die obere Platte des Leimholzes ist sauber angefast und die beiden Schraubenlöcher sind ja schon vorgebohrt und schließen den Kontakt zum Motor.
nice video but dosent work that way, i wonder if you remove the batteries from the Wood will still spin?
Yes if you spun it another way
Can't Stand Wind turbines but your Magnet Process could be the Answer to making them turn when there is no Wind you Sir are a Genius!!👏👏😉
why need wind turbines if this spins non stop ?
@@karolys93 because it’s fake dummy
Make the base out of clean Lexan, not a hollow plywood box. The twitching magnets were a new distraction but they weren't even aligned properly.
I built one of these, it took off like a flying saucer.
Went right through the roof, I never saw it again.
It seems that it will not be so easy. If I had the chance, the first thing I would do, would be to cool all the components, including the magnets, to near absolute zero to calm down the wild conditions in the electron envelope of the atom. In this way, they get different properties from the magnetic point of view. It's the topic for many experiments, including levitation, but I'm thinking mainly Hall effect, which in normal temperature works only on a thin layer of material, but superconductivity can change this situation dramatically. Otherwise, it might be worth trying to oscillate a superconducting magnet by simply passing an alternating current at a special or, say, resonant frequency to create an alternating magnetic field. Have a successful hunt.
R kalvoda fyzika naruby.
Yup...spend all that energy to make it really cold...and still not get even close to unity, let alone overunity.
Fyzika naruby, rikas..
All that just to hide the battery :|
You are a very intelligent guy ...if you could tell a man how to harness the power to educate himself ...the power of the mind that is ...what would you recommend the beginning of his thoughts be ... or how to begin to constructively educate yourself ..on a level where it all comes together to form an exponential rate of growth through synchronicity enhancement in the pattern of learning that naturally make learning a process where we subconsciously take in knowledge into our memory banks through a neural network of information that has us learning at a rate of comparison to the Phrase doing more than on thing at a time .. we have the ability ..some never took a typing lesson though we automatically stay one step ahead of that keyboard as to seemingly already know where the next character in your mind is located as you compose your thoughts.
I like your funny words magic man.
this is a perfect thing i seen so far, better i make it as well. Can't find any wooden box with hidden batteries: (
Lmao.
Contrary to popular belief: You can take a normal wooden box and put a normal battery in it and the whole thing magically transforms into a wooden box with a hidden battery. Einstein discovered this when he was trying to find a way to make his weed invisible.
Aici nu e vorba numai de baterie ascunsa. O poate invarti si cu autosuflanta. Sufla cu aer si se invarte. Daca observati,atunci cand pune becul,discul cu magneti are aceeasi turatie. Ar trebui sa fie o franare.
Hey now, this IS powered with free energy! He found the batteries on the sidewalk.
Looks easy to build. Give instructions if it’s not fake with compressed air spinning the rotor.
Well you answered the question yourself. Instruction get a compressor.
Y'know, it's not that I don't *WANT* this to actually work. It's that I know there's no such thing as free energy. Gotta admit, it's a cool concept. I wish this was real.
..you think solar panels are lies?
@@surenbono6063 you think solar panels work 24/7 ?
@@surenbono6063 solar panels aren't free energy. It comes from the sun. That's what I mean. It's free to us, yes, but not free to the sun.
@@swistedfilms ..you mean the sun had to pay for it..?
@@MrHakuro ..if you want to it will..it's all in the mind...you gotta work it out..if I prove it can work at night what will I get for it...?..there is light that can grow plants 24/7 indoor..
If a free way to produce electricity is ever discovered it will be buried very quickly
My thinking is like this producing electricity isnt difficult producing it in a manner that doesnt use power from some other source is impossible
So that leads me to think
That solar is where we should be looking
Even if this did work (it doesn't), the energy required to make just one of those nuts used to get it running would require that 'generator' to run for thousands of years.
Fiz um igual mas o meu transfere a corrente elétrica pelo ar. É só aproximar os aparelhos e tudo começa a funcionar sem os fios.
yang bener?
And nobody ever thought of that. Incredible!
(battery is under the unnecessarily thick base, wires are hidden under the motor or power is supplied through the nails)
Its real. Ive been trying to tell people about this for years its free energy, its missing the magnetic gyro though. Build this with a magnetic gyro strong and you wont need batteries in an electric car you can just always generate the energy like this 24/7 and only use the energy when you want to. This is a crap build but with a magnetic gyro and alot more magnets this works. Its a brushless electric motor with backwards physics basically so the motor gives the energy instead of taking it. 1 backwards motor and 1 normal electric motor together make unlimited travel for a car or unlimited power for a room/house. A brushless motor can be turned into a generator by replacing the magnets with opposite polarity so when the engine spins its making electrons not eating then. (magnetic gyro in the middle is the key) Maybe even making a normal brushless spin backwards would get the same results if it can handle being a conductor of its own energy.
@@ModernRetroGameplay The only free energy is newton rolling in his grave from this bullcrap
The base is box, and there most be battery built inside the base. The platform with the magnets can't create the movement.
this motor that is under the disk with the magnets, it even generates energy in pulsating direct current, but the regulator plate that is right below where he soldered the black and red wires, it is the regulator circuit that adjusts the speed and it does not allow that the current returns from the motor to the terminals, just enter the motor already regulated, so for that to work it needed an external 6a 12v source but it doesn't show that. And this source has to feed the motor plus the lamp. I'm not saying magnetic energy is impossible but that's not how it's done. the secret is in a super efficient generator.
Two magnet repels only halfway it length. The other halfway it must attract. You. May succeed if you can remodel the flu path. But remember. Fluxes prefers path with least resistance. In order to conserve its energy.
Unfortunately for the sleepers magnets have always played a massive roll in energy on this planet way before this reset. So it does and will work despite what your programming makes you spew out
Fortunately for the "sleepers" the prediction of physicists, that permanent magnets alone can not produce any energy, stands still unchallenged. What is shown in the video is obviously a scam. No "inventor" has ever agreed to allow an inspection of his construction by experts. Why? Because all running magnet motors are scams.
maybe you should think about who "programmed" you to think that these types of inventions are real.
@@alistairmurray626 lol
Придерживаюсь мнения что конструкция должна быть на прозрачной поверхности.
Тогда литиевый аккумулятор будет видно.
И еще надо было конструкцию поднять над столом, а то он крутил ее на одном месте.
Maybe it´s interesting with Blue Ray Disc and bigger screws
Not to be a negative Nelle but I would like to see a wide shot, to see if there is a hair dryer blowing on the CD wind mill.
The magnets on the CD look like a lot like wind vanes.
Free and infinite energy does not exist. The magnetic wheel will stop after a few seconds due to magnetic and mechanical losses. We always find this kind of tutorial on the internet, but it's a fantasy, not reality.
Like u
@@user-nb3xu8yw6h If that is what you believe, why do you watch these videos?
Ну почему же ? А желания людей к бесплатному сыру ?
i just made that with a 6 volt bicycle dynamo and used wooden dowels for the bearing magnnet holders ,and when i spin it up all three of the magnets on the dowels turn in a 360 degrees actually propelling the cd at too fast a speed that it want to warp ,so im going to double or triple the cds or use a thick wood
@@steveswhirld зачем ты врешь ? Любой объект помещенный в магнитное поле находит точку пакоя в зоне магнитной ямы , магнитная яма будет всегда между двумя магнитными палями , мсила и направления магнитного поля значения не имеет , магнит всегда будет иметь магнитную яму в которой удерживается твоя движущаяся система ... ответь , зачем и почему ты говоришь ложь ?
O projeto em si já é uma mentira, aí o cara coloca uma lâmpada incandescente pra acender, mesmo sabendo que esse motor não tem amperagem suficiente pra isso 🤣🤣 se tivesse usado um Led ficaria bem mais real. Sinop MT Brasil
il trucco sta nel fatto che non si sa cosa c'è dentro o sotto la tavoletta di legno. Penso non sia un caso che i fori per inserire le viti siano già realizzati nella tavoletta prima che inizia il video. Penso che le viti una volta inseriti tocchino i poli di una batteria che sta dentro o sotto la tavoletta.
ehh....man....i think you can make that thing pretty powerful...make those magnets a little longer on the axl contact areas, not deeper....and move the exterior magnets in and out for acceleration...
tell them your firm needs 10% to 30%.... your awsome....
Si hubieras mostrado que la batería estaba escondida debajo del árbol, habrías suscrito y pulsado "me gusta".
El perpetum móvile o como se llame no es factible
I am going to go buy some magnets and no more pay for electricity bill. Thanks a lot!
That motor deliver maybe 3V . Not for 125V.
@@tepansenteolt2980 then I connect 40 of them in series
@@tepansenteolt2980 It hardly delivers a volt! Due to friction, it'll just slow down to a stop
Just don't make it free energy doesn't exist and these generators will never work. Please consider doing something better than wasting time on fake stuff
@@Pelican_t bro, i was not serious
Every free energy device uses hot glue. That's where the power comes from. You can dispense with the magnets and use only the hot melt glue. You need good quality glue to get decent results.
Omg... genius! The only other constant seems to be the batteries. And my friend, this is where my answer resides. 🐢
@@goofyFuNstupid 🐔👍 pollo
@@muda8616 You da man, no no its pronounced... Muda-man!!!🤓🖖
From an engineering point of view... Assuming that this thing has no battery and is running just on pure magnetism, it will eventually come to a halt since there will be energy losses (mechanical losses due to friction, etc) that even the force of attraction between the magnets cannot overcome. But nice try anyway.
For a 2nd I thought he was going to lift it up n show the battery underneath 😂
Это сказка 🙂
Ja toże dumaju.
Нет не сказка.. Мотор постоянного тока можно превратить в генератор. Только мощность будет слабая. Надо трансформатор накинуть туда
@@evgensedov и что? мощность увеличиться от этого!?))) Сказочник)
пустотелая фанерка с батарейкой.))))
Impossible to work. those 3 magneets on the side would work against eachother.
But i know how it really works.
I know there's a battery below, but why doesn't this work? If you blow air to the tilted magnets it will rotate because of the pushing force. But why does the pushing force of two magnets not work? 🤔🤔
Because the magnet also pushes in the other direction
YESSS this man saved the earth energy problem!! He is becoming the richest man on earth! But not with generating energy, but with youtube views. Unfortunately not from me, because i have an ad-blocker!
Can you arrange the experiment again on the surface of a thin cardboard or wooden plank so that no one doubts that a power pack is hidden underneath the base?
@@common1529 -- wait until he discovers narrow lengths of flex-circuit salvaged from an old tablet's battery, then superglues them to the bottom, and paints over them.
I say take away his superglue, hot-melt glue, and wood screws. THEN let's see what he can do! :)
The _real_ tragedy of this absurd comedy is that anyone actually _believes_ this guy's nonsense!
@@This_is_my_real_name wait until he just straight up drills a hole in the table and attaches ac wires to it lol
news flash: It's impossible
Battery connected to screws, oh how marvelous!! And the backup is compressed air.
Good point. I wasn't thinking compressed air. I thought batteries. But watching it start up, compressed air makes more sense.
Hi there, could you please tell me the orientation of the magnets? Where did you purchase?
any free electric device must be fake, "free electricity" violates the principle that energy cannot be created or destroyed, only transfered. The most difficult thing to accomplish with free energy devices, is to figure out where to hide the battery
Its fake
do not waste your time and money on a fake spinning wheel
The device is clearly a free energy device - The answer is simple - the battery was a free gift from the inventor's birth person ( mother in pre-woke days)
Does not work! The video has the audio of a song and not the ambient sound on purpose, so that the noise of the fan blowing the disc doesn't appear!
Lol
see those nails, probably a 5v power supply is under it 🤣🤣
is a good start . but you need to place small weals in the place of fixed magnets .
fix magnets do not work . they need to spin .
OK since the basic design is now created add a magnetic gyro to the center and watch what happens. Seriously try this itll be the biggest power source youll ever see if you can make it strong enough to stay together.