Very good my friend. The stator should have magnets set at 21 degrees off axis in a north south alternating configuration. Each Stator rotor plate should be off set from one another 17 degrees. The spindle should be free floated in a mag lev gate for rotor. You will need power plates with magnets and a super conductive coil. I won't share the clutch mechanism, however you need a start motor to spin the rotor up to 3000 RPM, disengage it from the spindle. Watch the power out. Then reengage spindle and spin to 6000 RPM, then 9000 and so forth to 20000rpm. Watch the power output. You will need a smart controller, rpm sensors and some other kit. Enjoy
Nice job bro! In my opinion the magnet have to work not in attraction... You have to displace N vs N and S vs S, and the magnet on stator have to be pair and in rotor dispair (or vice versa) for example: 8 in rotor and 9 in stator make this attempt with only 1 disk if it work you can do the same job with other 2 disks and couple the other disks all together. Pay maximum attention to the distance BTW stator and rotor magnets is important because can influence the magnetic field each other. Another attempt you can do is to positioning rotor not completely inside stator and make a distance of 1 o 2 mm BTW magnet axes that can improve the repulsion force BTW magnets. You have machine for build any prototype you can make more try... Please don't abandon you're magnetic motor dream! Thanks for show us your job bro.
Another suggestion coul be to use neodimium magnets more Long in stator minimum double but better triple (just put another one in series) because in this way you'll have more distance between magnet's pole and avoid magnetic influence VS stator magnets.
I wish you much success.. In this project of yours, you have made several mistakes due to which the engine cannot work... 1 gauge of magnets 2 inclination of perpendicularity of magnets, etc I am personally developing something similar on the principle of magnets Sincerely
Est-ce possible de combiner avec des hautes et basses fréquences,vue que les sons vibres à l infini? J suis pas du tout experte dans ce domaine,je posais la question 😉
what about the angle and the shape of the magnets, you had the plane to put them in angle but you placed them straight, thats reppeling inwards and does not help to puch the stator around.
good you are one step on the path...Now the rotor is built but cutting no copper coils and the interior poles are not being used so the design is flawed if you get this let me know so we can talk
It's the answer ! Those gays are debunkers... But there will always be those who believe in this bullshit to discredit these forces of attraction and repulsion. It's all just deliberately misapplied, or they're idiots.
@Fred Bloggs ~NEVER FORGET "BREAKING THE CHAINS" HEROES~ The evil power cartel have gone to endless lengths of crime, & false propaganda, major media, school/college manipulation, to stop you from knowing the truth... These AMAZING, BRILLIANT, "think outside of the (power-grid) box" minded geniuses, have ALL tried waking the WORLD up! ...plus many more.. ~Nicola Tesla, Stanley Meyers, Dennis Reed, Troy Reed, Paul Pantone, John Christy & Lou Britz, Joe Newman, John Bedini, Howard Johnston, Richard Clem, Daniel Dingel, John Searl, Thomas Ogle, Dennis Lee, Eric P. Dollard, Tewari, Adam Trombly, Paramahamsa, Dennis Klien, Parendev McKenzie, Muammer Yildiz.. WAKE UP PEOPLE ! SLAVES N0 M0RE ! ..& a special thanks- Edward Snowden, Julian Assange Please follow link and share, thank you 🙂 petitions.whitehouse.gov/petition/end-slavery-all-humanity-administration-needs-quash-suppression-independent-free-energies Your right to have FR€€~€N€RGl€$ ! Stop being SL∆V€D B¥ TH€ C∆RT€L$. ~PLEASE SIGN PETITION~ I am registered to vote, the reason it ended with only 6 signatures, is because those six I personally followed up on with are friends and family members. .. it is THAT controlled. The controllers of our internet are vested with the same ones that control our mainstream media. The ONLY way that we can accomplish this is to go door-to-door get addresses and signatures, and give them our emails in case they change addresses. In the short limited time frame that they give us 100,000 signatures in 30 days, to come up with ridiculous numbers in the amount of time before it's even VIEWABLE to others "which they control", it is the ONLY way for us,,- to go door-to-door and collect signatures so at a specific time frame we can present it to Congress & and DEMAND.
बहुत सारी चीजों के बारे में मेरी कल्पना में आतीं हैं जिसे मैं पैसे कीकमीसेकरनहीसकाआजजबउसी कार्य को जब किसी को करते देखता हूं तो मुझे बड़ी खुशी वहैरानीहोतीहै। किमेरातजुर्बाइन्हे कैसे मिल गया।
I am a fan of results but what i love more that result is knowing what you are doing and what i value more than that is hardwork , I love this video , I just wish it was more like how to do it at home
One disc alone will get stuck. The two other discs are there to pull it past the "stuck".They are offset. I still believe it could work ,but I am not going to build it. Good work.
I understand a magnetic motor will stop at some point but if you can use a small motor to restart it when it stops why won't that work.and how long will a magnetic motor run before it stops and why cant you convert that to a flywheel and then a clutch that spins a alternator or something
Valve actuation. Rotate the magnets in the mast in on off positions.. You can start hyper inneficient and use a microcontroller to work out mechanical actuation dynamics..
The most interesting part was towards the end you had mentioned something like 'you could get it spinning for roughly 15 seconds until you'd have to apply force again'. I was thinking, what if you had one or a few magnets on your outta wheel slightly larger to generate more magnetic force on your inner wheel to keep the motion on-going?
the point is that his device doesnt any power, so it just slows down due to friction if he would take out all magnets, he would also be able to spin it for 15s
@@MrZauberwuerfel I've seen similar models except one with a spring-loaded arm that has magnets pointing the other way (meaning after an entire rotation, force is automatically applied again) allowing you to remove the need for a person to spin it. I believe infinite power is possible through perpetual motors...but it's the minds of others that are finite that help prevent it from moving forward. Every breakthrough in history has always had a mob of people saying "it'll never happen" or "it's impossible". Time is the only real obstacle in the way of this breakthrough
Generell ist dieser Aufbau plausibel und gut ausgeführt aber ein kleiner Fehler ist zu sehen die magnetischen seitenkräfte wurde in den Bohrungen nicht abgeschirmt somit bremst sich die Konstruktion selbst und der gewünschte abstoß Effekt bleibt aus . schöner ansatz
Good build dude that looks nice. However I do recommend figuring out how to get it to go without stopping. I suggest configuring the flanges or flywheels whatever you want to call it off set a little bit from each other so that way the magnets are not in a straight line and the magnets on the wheels should be at an angle as well. slightly stagger the wheels it's not a slot machine.
@@valdissafonovs2565 Troy reed made car and other machines with natural magnets, but he was destroyed or killed or disappeared, who knows. why u insist this is not possible? You waste words saying "impossible", and talking too soon. Even elon musk said something related to the fact that everyone said his ideals are impossible like go to mars or whatever. And he reached to make vertical landing rockets which also it was rumored to be ridiculous and impossible "before it was made".... until he reached to do it real. Why don't you not shut your mouth and just watch how this concept of magnet motors becomes real.
@@survivorgamer2447" shut your mouth" what nice!:D Gamer, go instead learn at least basics of physic. Or play your games un do not comment things you do not understand
@@valdissafonovs2565 i prefer not to argue with an idiot that don't even research whati i said, such as troy reed. Instead, you only rant and you will stay skeptical for the rest of you life.
great effort that you put in, however what is needed to explore the potential on this design is to be able to dynamically adjust(while the motor is spinning) the offset angle between the three rows of magnets - I think it is all down to timing. Another person commented below that 20 degrees should be used, but even if this is a working number it would be great to be able to tune this variable while the motor is running.
hello , just aska something....please tell me the magnet in motor ( axial) is the same in the ring ..ex. north and north or north and south???????????? .... thank you
You need to keep the stator at properly distance from the rotor, you made too close. And the stator as well needs to be mobile, like you can control the distance between it than the rotor. And the majority magnets should be repelling and just fewer needs to be attracting each other. There’s a guy in Brazil that make it works with trash materials. So you’re amazing making with high quality material just need more research and study. Good luck. Looking forward to see you getting there 🙏🏼
Колёса должны быть со смещением магнитов одного колеса, относительно другого, а у вас магниты стоят в одну линию на всех колёсах, параллельно оси вращения. . Одно колесо, само по себе, работать не будет. Соответственно, и три колеса в такой же параллельной конфигурации, работать не будут. Только со смещением. Колёса работают в симбиозе друг с другом на одном валу. Только тогда это будет единой конструкцией. -- Любое устройство, требует настройки. А вы собрали, три параллельных нерабочих колеса, без настройки. Это у вас, набор запчастей. Сместите второе и третье колесо, на половину магнита, как в кодовом замке на дипломат кейсе.
Que maravillosas ideas ojala las promoverán en el mundo para que ya no aya contaminación de mi nanas en containers rifer congratulecion por tan avanzada tecnologia
there are two main mistakes here. 1st one is: the magnets on each rotor wheel must not be aligned axially but must be "unphased". 2nd: the number of magnets and their strenght as well as the distances between rotor and stator magnets is not sufficient to run continuously (these parameters are not so easy to tune, as it may appear at first sight!). Another point is, the number of rotor and stator magnets should not be a pair number, any possible "resonance" that should give an equilibrium should be avoided. Better to have umpaired number as 13 on rotor and 17 for stator for example. Finally , inclination of magnets doesn't seems appropriate so that they can repel with maximum tangential force. LAst but not least...the magnets MUST be shielded !!! typically bismuth or other diamagnetic material should be used to shield the poles not involved in the repulsive action, both in stator and rotors. This is a very important point.
Simple question, why does it stops after a few seconds? I saw the other guy saying that it's just a flywheel, I understand what he means, but why physically it cannot work and just continue to spin once you start it?
LeCoureurDesBois the motor itself is basically an equilibrium of forces. You have to pay attention that a magnetic field acts in all directions. For this reason there is a force draging the running motor into the direction of inertia but there is also a basically equal force pulling it back to the last magnet which just was passed.
good evening, sorry for the question but can anyone tell me if this engine runs perpetually or maintains a constant speed of about 15 seconds and then stops? many thanks in advance.
I do believe you forgot...over looked...maybe not aware of..."Shielding". Shielding, from my understanding of what it does, is the factor that controls where and when you want the flux present. It enables to set a tipping point without the push back/reverse repel. Of course shielding is another strange workings imposed on the magnet and if implemented just right, that thing should spin up and then burn up because you have no SPEED CONTROL implemented or a way to disengage. Read a paper years ago about a group of students that did one of these and it basically blew up from over speed...I know "over speed' is a strange term. but accurate. A visual of what shielding is influencing around the magnet is/has not been easy.. What ever you do, do not try to sell a working model. You will come down with a sudden case of "Not Alive." It really is very contagious.
Good machining ...To keep the rotation moving add a 5 lb. flywheel ( brass ) to the rotating cylinder ...Then machine spacers the exact length needed drill and ream for the threaded rod and then assemble.. Good luck with Version 2
im not sure what you mean by that magnetic motors do not work. in refrigeration theres a new technology by turbocore i believe that use this principle for their motors. very low starting amp motors.
actually if you could get the out side ring of magnets to flip via a geared setup , so they rotate with the inside rotor, you might get around the problem, but as I see it, it takes energy to move the inside magnet passed the outside magnet and once it passes it gets a push ie every action has an equal and opposite reaction nothing is free, or so it would seem. But if you could turn down the magnetic power of a solid state magnet, and build a timing device that turned the magnets off and on for free. then you might make a free energy device or over unity device.
Great !!! Seems it will work if you correct 3 mistakes. One : You divide the stator in to 20 places and the rotor in to 17 places ; it is wrong . calculate it again , I am sure you will find the correct division. Two : It is enough to have two disks of rotor and stator. Three : Calculate again the angle between to disks (yours is a large angle , depends to the number one). And seems i will make one for my self. thanks again . It was a good one on youtube .
You need a 20 degree offset to the pattern of magnets across the 3 rotors like in the Pendelv motor. It is necessary to keep it moving? Did this one work any longer than 15 seconds?
I think the magnets are supposed to act on top of any momentum that the inner disks may have. The magnets are supposed to counteract any resisting force against the momentum of the disks so that they just keep on spinning. An Object in Motion Stays in Motion. The problem is that there are natural forces acting against the spinning disks. The Earth's atmosphere, Earth's gravity and the friction of the shaft spinning inside the frame. All these things will slow it down. The magnets are supposed to counteract all of that. Also, the magnets have no system in place for stopping them from acting against the momentum of the spinning disks. This is because the magnets are given enough time and space to "face each other", giving them a chance to pull the shaft in the opposite direction. This is doesn't happen for very long but it happens for just long enough to interrupt the cycle. As well as the fact that he's not using ball-bearings to facilitate the shaft's rotation. Basically what we have here is a cardboard boat in a bathtub. It floats, as long as it doesn't get "too" wet.....
Jim, could you make one for me plz. I d do anything to have one of these but I am not a mechanical person. I ll pay materials, dev time and shipment cost. plz!!
I see you tried to overcome that by spreading the lining but surely the central magnets will find gaps by finding eqalibrium. Instead drill the holes in the wheels at 45°angles. Gravity then helps the process.
At 4:42 minutes, you used the hammer of glue on the magnets when you fastened the magnets to the supports. You had to know that they are demagnetizing at high temperatures, which is why your magnetic motor didn't work!
I saw people who made the engine like you from a plastic that did not work and people who made it from aluminum, and it worked ! I think that aluminum weakens one side of the magnet or something like that?
There is a lot of action ... probably because he wants everyone to understand that the magnetic generator is not working. But, if you want to know the conspiracy doctrine about it, see this article: electric-self-sustaining.blogspot.com/2019/08/earth-engine-review.html Go there ... and you'll see: Proof Vs. "inherent faith"
Brilliant effort my friend! Electric motors use exactly the same motive force as magnetism so there HAS to be a way of creating a motor with nothing more than magnets. Just because we haven't done it yet doesn't mean it can't be done. 👍
the thing is that in the history of physics we have never ever found a closed system where the combined energy in the system changes therefore i find it highly unlikely, that a simple arrangement of magnets could change that fact
@@MrZauberwuerfel Exactly. The problem of magnetic motors is the first and last magnet, between which there is always a dead point. In addition, the configuration of the magnetic ring with its fields always creates a single magnet (possible shielding of the magnets contributes to the same). The electric motor "can" turn on suitable coils, so it is a controlled "magnet" and does not close in a circle - a rotating magnetic field is created, which is not possible with neodymium or cobalt magnets. It is possible to break the dead center with energy, but the torque would be insignificant and again it would not be a perpetuum mobile.
I want made but mine have no money because my age is 18 year so I not work whose parts in this magnet generator please you sent these name so I made it
May you can put 1 less magnet on the rotor... For exemple, on the rotor 14 magnets and, into the stator, 15... If you try this, could you post a video, please?
did u not see how much work was involved in making this? now u want him to rebuild half the motor to please ur curiosity of a different way to build it... and if that does not work then u want to try another way.. and another, etc?
Very good my friend. The stator should have magnets set at 21 degrees off axis in a north south alternating configuration. Each Stator rotor plate should be off set from one another 17 degrees. The spindle should be free floated in a mag lev gate for rotor. You will need power plates with magnets and a super conductive coil. I won't share the clutch mechanism, however you need a start motor to spin the rotor up to 3000 RPM, disengage it from the spindle. Watch the power out. Then reengage spindle and spin to 6000 RPM, then 9000 and so forth to 20000rpm. Watch the power output. You will need a smart controller, rpm sensors and some other kit. Enjoy
Nice job bro!
In my opinion the magnet have to work not in attraction... You have to displace N vs N and S vs S, and the magnet on stator have to be pair and in rotor dispair (or vice versa) for example: 8 in rotor and 9 in stator make this attempt with only 1 disk if it work you can do the same job with other 2 disks and couple the other disks all together.
Pay maximum attention to the distance BTW stator and rotor magnets is important because can influence the magnetic field each other.
Another attempt you can do is to positioning rotor not completely inside stator and make a distance of 1 o 2 mm BTW magnet axes that can improve the repulsion force BTW magnets.
You have machine for build any prototype you can make more try... Please don't abandon you're magnetic motor dream!
Thanks for show us your job bro.
Another suggestion coul be to use neodimium magnets more Long in stator minimum double but better triple (just put another one in series) because in this way you'll have more distance between magnet's pole and avoid magnetic influence VS stator magnets.
@@flaviop.3938 yes in the rotor, and on the stator you can use pot magnets that come with their own shielding
th-cam.com/video/H5PXwxY-o4I/w-d-xo.htmlsi=OTnjA76Evz69O_5y
I get it. You don’t really want it to work. Then you’re a success, lol
Do you have the plans of the motor ? Or how she cans find it ?
great work, you achieved the same exact level of performance as every other motor without a power source in history. state of the art at first try.
Exactly.
Сколько труда,вложения,встречи с победой. В конце результат по 0.Лайк большой за работу.👍👍👍👏
I wish you much success..
In this project of yours, you have made several mistakes due to which the engine cannot work...
1 gauge of magnets
2 inclination of perpendicularity of magnets, etc
I am personally developing something similar on the principle of magnets
Sincerely
Est-ce possible de combiner avec des hautes et basses fréquences,vue que les sons vibres à l infini?
J suis pas du tout experte dans ce domaine,je posais la question 😉
Complimenti per il prototipo. Hai dei disegni per poter realizzare questo bellissimo progetto? Grazie anticipatamente se puoi fornire i disegni.
have you tried with angled cut magnet and magnetic shielding? some say it work but without actual try it still a dream
what about the angle and the shape of the magnets, you had the plane to put them in angle but you placed them straight, thats reppeling inwards and does not help to puch the stator around.
good you are one step on the path...Now the rotor is built but cutting no copper coils and the interior poles are not being used so the design is flawed if you get this let me know so we can talk
Notth south magnetic pole staggered position for the magnets. Are you selling the not working one .?
You need to shield 25% of the inner magnets so the attracting force of the outer magnets don’t cancel the the repellant drive force👍
It's the answer ! Those gays are debunkers...
But there will always be those who believe in this bullshit to discredit these forces of attraction and repulsion. It's all just deliberately misapplied, or they're idiots.
excellent skills and really running 15 sec at constant speed is an achievement! congrats
Fred Bloggs so ur saying that there is no magnet motor that constant moving?
@Fred Bloggs ~NEVER FORGET "BREAKING THE CHAINS" HEROES~
The evil power cartel have gone to endless lengths of crime, & false propaganda, major media, school/college manipulation, to stop you from knowing the truth...
These AMAZING, BRILLIANT, "think outside of the (power-grid) box" minded geniuses, have ALL tried waking the WORLD up!
...plus many more..
~Nicola Tesla, Stanley Meyers, Dennis Reed, Troy Reed, Paul Pantone, John Christy & Lou Britz, Joe Newman, John Bedini, Howard Johnston, Richard Clem, Daniel Dingel, John Searl, Thomas Ogle, Dennis Lee, Eric P. Dollard, Tewari, Adam Trombly, Paramahamsa, Dennis Klien, Parendev McKenzie, Muammer Yildiz..
WAKE UP PEOPLE ! SLAVES N0 M0RE !
..& a special thanks-
Edward Snowden, Julian Assange
Please follow link and share, thank you 🙂
petitions.whitehouse.gov/petition/end-slavery-all-humanity-administration-needs-quash-suppression-independent-free-energies
Your right to have FR€€~€N€RGl€$ !
Stop being SL∆V€D B¥ TH€ C∆RT€L$.
~PLEASE SIGN PETITION~
I am registered to vote, the reason it ended with only 6 signatures, is because those six I personally followed up on with are friends and family members. .. it is THAT controlled. The controllers of our internet are vested with the same ones that control our mainstream media. The ONLY way that we can accomplish this is to go door-to-door get addresses and signatures, and give them our emails in case they change addresses. In the short limited time frame that they give us 100,000 signatures in 30 days, to come up with ridiculous numbers in the amount of time before it's even VIEWABLE to others "which they control", it is the ONLY way for us,,- to go door-to-door and collect signatures so at a specific time frame we can present it to Congress & and DEMAND.
बहुत सारी चीजों के बारे में मेरी कल्पना में आतीं हैं जिसे मैं पैसे
कीकमीसेकरनहीसकाआजजबउसी
कार्य को जब किसी को करते देखता हूं तो मुझे बड़ी खुशी वहैरानीहोतीहै।
किमेरातजुर्बाइन्हे कैसे मिल गया।
I am a fan of results but what i love more that result is knowing what you are doing and what i value more than that is hardwork , I love this video , I just wish it was more like how to do it at home
One disc alone will get stuck. The two other discs are there to pull it past the "stuck".They are offset. I still believe it could work ,but I am not going to build it. Good work.
2.5m views. Monitized by youtube, I'd say it works just fine.
@@KevinSmith-os5yz lol ,yes.
I understand a magnetic motor will stop at some point but if you can use a small motor to restart it when it stops why won't that work.and how long will a magnetic motor run before it stops and why cant you convert that to a flywheel and then a clutch that spins a alternator or something
Valve actuation. Rotate the magnets in the mast in on off positions.. You can start hyper inneficient and use a microcontroller to work out mechanical actuation dynamics..
Have you calculatet the treadet Rods? There are Not made of stainles steel.
The most interesting part was towards the end you had mentioned something like 'you could get it spinning for roughly 15 seconds until you'd have to apply force again'.
I was thinking, what if you had one or a few magnets on your outta wheel slightly larger to generate more magnetic force on your inner wheel to keep the motion on-going?
the point is that his device doesnt any power, so it just slows down due to friction
if he would take out all magnets, he would also be able to spin it for 15s
@@MrZauberwuerfel I've seen similar models except one with a spring-loaded arm that has magnets pointing the other way (meaning after an entire rotation, force is automatically applied again) allowing you to remove the need for a person to spin it.
I believe infinite power is possible through perpetual motors...but it's the minds of others that are finite that help prevent it from moving forward.
Every breakthrough in history has always had a mob of people saying "it'll never happen" or "it's impossible". Time is the only real obstacle in the way of this breakthrough
👍!Metal and Vismyt?...
Generell ist dieser Aufbau plausibel und gut ausgeführt aber ein kleiner Fehler ist zu sehen die magnetischen seitenkräfte wurde in den Bohrungen nicht abgeschirmt somit bremst sich die Konstruktion selbst und der gewünschte abstoß Effekt bleibt aus . schöner ansatz
If it doesn't work, what's the use making it?
Good build dude that looks nice. However I do recommend figuring out how to get it to go without stopping. I suggest configuring the flanges or flywheels whatever you want to call it off set a little bit from each other so that way the magnets are not in a straight line and the magnets on the wheels should be at an angle as well. slightly stagger the wheels it's not a slot machine.
👍!Висмут и Железные гильзы?Metal and Vismyt?
Could it be some type of frictionless bearing?
thank for your video, I will making try it.... but Ineed detail for diametre for chasing magnet. ..
Great job man 👍 world needs people like you who experience new ideas even if it doesn't work. Thanks for sharing.
Cyrus
Waisting time and materials...
BUT. Maybe fo those " wishful thinking"
@@valdissafonovs2565 Troy reed made car and other machines with natural magnets, but he was destroyed or killed or disappeared, who knows. why u insist this is not possible? You waste words saying "impossible", and talking too soon. Even elon musk said something related to the fact that everyone said his ideals are impossible like go to mars or whatever. And he reached to make vertical landing rockets which also it was rumored to be ridiculous and impossible "before it was made".... until he reached to do it real. Why don't you not shut your mouth and just watch how this concept of magnet motors becomes real.
@@survivorgamer2447" shut your mouth" what nice!:D
Gamer, go instead learn at least basics of physic.
Or play your games un do
not comment things you do not understand
@@valdissafonovs2565 i prefer not to argue with an idiot that don't even research whati i said, such as troy reed. Instead, you only rant and you will stay skeptical for the rest of you life.
@@survivorgamer2447 keep dreaming imbecil:D:D.
Magnet motor:D
Flat earth: D
I m studying engineering..I want to do magnet as my project so please send me this motor design. N it's dimensions.
Does it blend?
WHAT IS THE PRACTICAL USAGE OS THIS DEVICE ?
There is a cable under the left arm and the poles contact with fingers you can see.
Where can I buy it? Do you plan to build a not working version 2.0?
How to get or order this type of magnet ,I want to make one by myself
I am very proud and appreciate your work.
I really admire your honesty and hard work.
this is real science without any tricks.
Nonsense
Singer - Awww. Reality is a bitch.
great effort that you put in, however what is needed to explore the potential on this design is to be able to dynamically adjust(while the motor is spinning) the offset angle between the three rows of magnets - I think it is all down to timing. Another person commented below that 20 degrees should be used, but even if this is a working number it would be great to be able to tune this variable while the motor is running.
This is my approach
what kind of plastic material you used sir? Thanks
POM, Acetal
@@revocnc can you send me a link where you bought the magnets? thanks
Try to make magnet not facing together if its repulsion is in inclined position its posible.. please just try a little inclined on it..
hello , just aska something....please tell me the magnet in motor ( axial) is the same in the ring ..ex. north and north or north and south???????????? .... thank you
Similar to this: assets.pinshape.com/uploads/image/file/38730/perendev-magnet-motor-with-generator-3d-printing-38730.jpg
ohhhh thank you ..can you send me more plans of your project , best regards
You need to keep the stator at properly distance from the rotor, you made too close. And the stator as well needs to be mobile, like you can control the distance between it than the rotor. And the majority magnets should be repelling and just fewer needs to be attracting each other. There’s a guy in Brazil that make it works with trash materials. So you’re amazing making with high quality material just need more research and study. Good luck. Looking forward to see you getting there 🙏🏼
Why does everyone use an axle when they can do without?
Hi, why do you say it does not work ? Your video prove that it is working. Perhaps the HP is too low ?
@Fred Bloggs Can it push air ? If yes, what RPM ? (like a fan)
hello, how many kva does it generate current?
I like this project, I don't have all these tools but I feel with some improvements that can work
Two kw current maginent motor How many Price pls sully india reply
where did you buy the POM(acetal) ? pls and thank you
Will it run with out stopping for ever?
no
Sir magnet ka pta kesay chlay ga N kon sa or S kon sa hay plz
Колёса должны быть со смещением магнитов одного колеса, относительно другого,
а у вас магниты стоят в одну линию на всех колёсах, параллельно оси вращения. .
Одно колесо, само по себе, работать не будет.
Соответственно, и три колеса в такой же параллельной конфигурации,
работать не будут.
Только со смещением.
Колёса работают в симбиозе друг с другом на одном валу.
Только тогда это будет единой конструкцией.
--
Любое устройство, требует настройки.
А вы собрали, три параллельных нерабочих колеса, без настройки.
Это у вас, набор запчастей.
Сместите второе и третье колесо, на половину магнита,
как в кодовом замке на дипломат кейсе.
are you sure with the polarity of your magnets?
good job, how much is this machine, and you can buy
Que maravillosas ideas ojala las promoverán en el mundo para que ya no aya contaminación de mi nanas en containers rifer congratulecion por tan avanzada tecnologia
there are two main mistakes here. 1st one is: the magnets on each rotor wheel must not be aligned axially but must be "unphased". 2nd: the number of magnets and their strenght as well as the distances between rotor and stator magnets is not sufficient to run continuously (these parameters are not so easy to tune, as it may appear at first sight!). Another point is, the number of rotor and stator magnets should not be a pair number, any possible "resonance" that should give an equilibrium should be avoided. Better to have umpaired number as 13 on rotor and 17 for stator for example. Finally , inclination of magnets doesn't seems appropriate so that they can repel with maximum tangential force. LAst but not least...the magnets MUST be shielded !!! typically bismuth or other diamagnetic material should be used to shield the poles not involved in the repulsive action, both in stator and rotors. This is a very important point.
can I know what grade of Neo magnets that you used? also I want to know what is the rotation value of the rotor? thanks in advance
Listen bilquess sister...watsapp me on 00923132804472
Simple question, why does it stops after a few seconds? I saw the other guy saying that it's just a flywheel, I understand what he means, but why physically it cannot work and just continue to spin once you start it?
LeCoureurDesBois the motor itself is basically an equilibrium of forces. You have to pay attention that a magnetic field acts in all directions. For this reason there is a force draging the running motor into the direction of inertia but there is also a basically equal force pulling it back to the last magnet which just was passed.
Fiction, gravity, vibration etc.
Enventually it would slow down an the magnets would find spot where they would be in equilbrium
good evening, sorry for the question but can anyone tell me if this engine runs perpetually or maintains a constant speed of about 15 seconds and then stops? many thanks in advance.
it doesnt work
its basically a flywheel, that just loses rpm due to friction
I do believe you forgot...over looked...maybe not aware of..."Shielding".
Shielding, from my understanding of what it does, is the factor that controls where and when you want the flux present.
It enables to set a tipping point without the push back/reverse repel.
Of course shielding is another strange workings imposed on the magnet and if implemented just right, that thing should spin up and then burn up because you have no SPEED CONTROL implemented or a way to disengage.
Read a paper years ago about a group of students that did one of these and it basically blew up from over speed...I know "over speed' is a strange term. but accurate.
A visual of what shielding is influencing around the magnet is/has not been easy..
What ever you do, do not try to sell a working model. You will come down with a sudden case of "Not Alive."
It really is very contagious.
have you ever heard of a 3d printer tryed that for the rotoverter doesnt work without mu-metal spacers do
Good machining ...To keep the rotation moving add a 5 lb. flywheel ( brass ) to the rotating cylinder ...Then machine spacers the exact length needed drill and ream for the threaded rod and then assemble.. Good luck with Version 2
Do it yourself
im not sure what you mean by that magnetic motors do not work. in refrigeration theres a new technology by turbocore i believe that use this principle for their motors. very low starting amp motors.
I think this more levitation and less propulsion,dont give up.you get this to work and skys the limit!!!
هل استطيع شراء مثل هذا المحرك المغناطيسي
actually if you could get the out side ring of magnets to flip via a geared setup , so they rotate with the inside rotor, you might get around the problem, but as I see it, it takes energy to move the inside magnet passed the outside magnet and once it passes it gets a push ie every action has an equal and opposite reaction nothing is free, or so it would seem. But if you could turn down the magnetic power of a solid state magnet, and build a timing device that turned the magnets off and on for free. then you might make a free energy device or over unity device.
Great !!!
Seems it will work if you correct 3 mistakes.
One : You divide the stator in to 20 places and the rotor in to 17 places ; it is wrong . calculate it again , I am sure you will find the correct division.
Two : It is enough to have two disks of rotor and stator.
Three : Calculate again the angle between to disks (yours is a large angle , depends to the number one).
And seems i will make one for my self.
thanks again .
It was a good one on youtube .
even with your proposed changes it wont work
have you made one yet?
good music, 9:33 The shaft has been spun, now take the energy!
Te faltó el ángulo en la armadura.
May i get this one to online?
I want to buy this?
How much this?
How small induction back into stator with ocilation and permanent magnet field winding
You need a 20 degree offset to the pattern of magnets across the 3 rotors like in the Pendelv motor. It is necessary to keep it moving? Did this one work any longer than 15 seconds?
ma kra What do you mean? It just needs a 20 degree offset! Well, that and something to spin it. Maybe a hamster?
Or a 0 degree offset can be spun by a hamster just as well. It's just a flywheel. The magnets don't really do anything in the end.
I think the magnets are supposed to act on top of any momentum that the inner disks may have. The magnets are supposed to counteract any resisting force against the momentum of the disks so that they just keep on spinning. An Object in Motion Stays in Motion. The problem is that there are natural forces acting against the spinning disks. The Earth's atmosphere, Earth's gravity and the friction of the shaft spinning inside the frame. All these things will slow it down. The magnets are supposed to counteract all of that.
Also, the magnets have no system in place for stopping them from acting against the momentum of the spinning disks. This is because the magnets are given enough time and space to "face each other", giving them a chance to pull the shaft in the opposite direction. This is doesn't happen for very long but it happens for just long enough to interrupt the cycle.
As well as the fact that he's not using ball-bearings to facilitate the shaft's rotation.
Basically what we have here is a cardboard boat in a bathtub. It floats, as long as it doesn't get "too" wet.....
kek? What do you think this is? World of warcraft?
Use google translate, otherwise don't even bother speaking.....
Jim, could you make one for me plz. I d do anything to have one of these but I am not a mechanical person. I ll pay materials, dev time and shipment cost. plz!!
Is this hand motor or what?
When it does not work, then what is the purpose of it's making?
Does any body know what size are the magnets he uses in this project?
Esta al final del vídeo...
I need this is magnetic. I wanna buy this. Do you have this magnetic?
Me gustaría saber si me pueden fabricar un motor de imanes. Sería para dar luz a 220v 15000w
What if the holes were drilled at 45°angles?
I see you tried to overcome that by spreading the lining but surely the central magnets will find gaps by finding eqalibrium. Instead drill the holes in the wheels at 45°angles. Gravity then helps the process.
it doesnt matter
it wont work
sr ye megnet kha se prchej kr skte he
At 4:42 minutes, you used the hammer of glue on the magnets when you fastened the magnets to the supports. You had to know that they are demagnetizing at high temperatures, which is why your magnetic motor didn't work!
It doesn't matter can't do much of rotation, because of opposite magnetic field - which as we see, stop rotation and can't be isolated.
Je pense que l'espace entre les aimants extérieurs est beaucoup trop grand, il y a moyen d'en mettre deux fois plus.
The most honest guy!
nice..how about price?
Türklerin bir yaptığı videoyu ingilizce al yazılı izliyorum :) elinize sağlık kanalınızı yeni keşfettim güzel içerikler hazırlıyorsunuz.
Good work you are the only one who made it . Really good
Energy always has an origin. People have to stop believing that there is such a thing as a free lunch.
I saw people who made the engine like you from a plastic that did not work and people who made it from aluminum, and it worked ! I think that aluminum weakens one side of the magnet or something like that?
WOW...great work.
if this motor use dc pulse motor as driver, you can increase the efficiency comparing with conventional dc motor.
que material uso donde van los imanes?
I wonder: why so many actions, if you can print on a 3d printer?
There is a lot of action ... probably because he wants everyone to understand that the magnetic generator is not working. But, if you want to know the conspiracy doctrine about it, see this article: electric-self-sustaining.blogspot.com/2019/08/earth-engine-review.html
Go there ... and you'll see: Proof Vs. "inherent faith"
yea 3d printing needs too much time and there's no insurance to say if they don't get broken after work 😂👍
How i want to buy this motor
The most accurate title for a video so far!
Hola a todos alguien puede decirme como se llama ese material blanco ?
Brilliant effort my friend! Electric motors use exactly the same motive force as magnetism so there HAS to be a way of creating a motor with nothing more than magnets. Just because we haven't done it yet doesn't mean it can't be done. 👍
the thing is that in the history of physics we have never ever found a closed system where the combined energy in the system changes
therefore i find it highly unlikely, that a simple arrangement of magnets could change that fact
@@MrZauberwuerfel Exactly. The problem of magnetic motors is the first and last magnet, between which there is always a dead point. In addition, the configuration of the magnetic ring with its fields always creates a single magnet (possible shielding of the magnets contributes to the same). The electric motor "can" turn on suitable coils, so it is a controlled "magnet" and does not close in a circle - a rotating magnetic field is created, which is not possible with neodymium or cobalt magnets. It is possible to break the dead center with energy, but the torque would be insignificant and again it would not be a perpetuum mobile.
I want made but mine have no money because my age is 18 year so I not work whose parts in this magnet generator please you sent these name so I made it
ok, where to buy the motor??????
Creo que no funciona por que falta un "apantallamiento magnetico " alrededor de los imanes del rotor.....
quanto custa uma peça dessa.
Muito bom.ele almenta a velocidade ou fica cnstante ?um projeto desta tamanho ele consegue jirar um motorzinho com gerador ?
Kahan par milega ye sar
May you can put 1 less magnet on the rotor... For exemple, on the rotor 14 magnets and, into the stator, 15...
If you try this, could you post a video, please?
did u not see how much work was involved in making this? now u want him to rebuild half the motor to please ur curiosity of a different way to build it... and if that does not work then u want to try another way.. and another, etc?
No, It's just for his fun, if he want. I try it and I know what is the result: rotating more time...
you already tried it? did u make a video of that? if so then please let us see the link. i would enjoy watching it and maybe learn something
To make a video, I had to rebuild it, and take it with my phone who had a bad resolution.
Will it work with a Bindi concept