I tried doing this video step by step but at 7:40 (After labeling) ping tests across computers don't work for some reason, it just says failed and i'm unsure what i did wrong? The routers are configured and lines are all green (Except the lines for the routers connected to eachother)
It's because of NAT and maybe Internet or LAN settings of the router since as far as I see he did not make any configurations to the wireless routers other than defining SSID and password.
Can you make an example with 1 PC and a server connected to a switch, the switch connected with a router, the router connect to a server and the add another router to our last router with 2 PCs?
So the Routers have no true IP address themselves like the Switches to justify the network, Just the IP table protocol used with the IP's of the switches subnetworks. Do all routers usually talk on the Serial Port lines or if you put then under the Ethernet/Ports then they'd need more difficult IP addressing?
Hola, cómo hago para conectar el router wrt 300N a la red y que se comunique con las demás pcs. Tengo el mismo diagrama de tarea y no puedo conectarlo o que pase la información de las laptos hacia las demás pcs. De antemano muchas gracias por la respuesta!!
@@nightfire2015 you can fit 2000 hosts within a /21 network. if you need 2000 hosts per country, then place a /21 in each of them and aggregate the routing to a summary address.
bro...just you just need to use dhcp for saving time ..!!! you can have dhcp server or dhcp pool in one router and then just enable dhcp inbound and outbound in other routers
@@shinasadida for hosts on lan connected to dhcp hosting router, these hosts will auto acquire a dhcp lease provided the default-router is their gateway. For those hosts outside of this lan, they can use the ip helper command and set a next hop ip address to the router running the server. A dhcp pool will need configured for that outside lan as well. HTH
It feels like you are already a pro in packet tracer but would you mind to explain, why did you use the other medium instead of straight-tru and cross-over?
@@shinasadida correct - those are serial connections, mostly used with packet over sonet (POS) interfaces, Serial interfaces, frame-relay setup, PPP, or HDLC connections. This tutorial could have used cross over cables between the routers, but normal WAN emulation is to show a low bandwidth serial connection. At least that is how most packet tracer files are..so its probably habit.
Hi There. I have questions. Is this one Network of 3 routers. Or is this 5 LAN networks that are connected to one another using 3 routers? Is it true that on router can facilitate up to maximum 2 LAN networks? The model that u have applied here - which network is this for? Is this for an office network that has different floors or departments or is this just a normal network for different classrooms?
if you will used static routing, lets assumed that router 1 network 192.168.10.0/24 (fa0/0 with IP 192.168.10.1) is connected to R2 (fa0/0 with Ips 192.168.10.2) and R2 fa01 with IP 192.168.30.1 is connected to R3 fa0/0 with IP 192.168.30.2 the command should be in R1 in exec mode. ip route 192.168.30.0 255.255.255.0 192.168.10.2 in R2 ip route 192.168.10.0 255.255.255.0 192.168.30.1 router 1 2 and 3 fa/0 should be reachable.. if you need actual command how the config works. email me at royramosherrera@gmail.com
@@royherrera2006 its too bad that packet tracer doesn't support route redistribution to make those scenarios much simplier.. static routing is usable and will work, but real world scenario it becomes unmanageable fairly quickly..
How come when I try to put the IP address and subnet mask in the ip configuration for the PC my professor told us to use I get an error saying it is not the right IP for that subnet mask?
This may be a silly question but how did you decide the ip addresses for the subnets? Like why do some start with 192.. and some with 172.... or 1....?
Hi first thx for great tutorial, unfortunately I have a problem with sending message from latops to other PCs, between pairs of laptops is possible to sending message but no to other PCs, where can be problem?
my colage project says i need to make 3 floors with 50 pcs on each... and another with 4 floors and 40 pcs on each... how can i make this quicker.... you just made a 14 minute video using 10 pcs...
3 floors with 50 pcs each - would require 3 - /26 networks, the 4 floors with 40 pcs each, would still require another 4 - /26 network spaces (40 pcs is over the allotted 30 host max on a /27, so /26 is next best option at 62 usable hosts), if the starting block is 192.168.0.0/23, then you can do the following 192.168.0.0/24 for the main block of the first 3 floors - separated into 192.168.0.0/26, 192.168.0.64/26, and 192.168.0.128/26. You would still have a /26 usable at the end of this block. The next block would be 192.168.1.0/24 for the 4 floor setup - 192.168.1.0/26, 192.168.1.64/26, 192.168.1.128/26, and 192.168.1.192/26 as the final subnet. That would get it done - just make sure routing is good to wherever those floors need to go. - HTH
sorry how do u know what is ur serial suppose to be? for example if my pc 0 1s 199.169.2.2 and pc1 is 199.169.2.3 what would be for my serial2/0? for my router
Gene Deocampo Assigned randomly. because he had declared them as static that means he will have to assign them himself manually and he can chose whatever he wants. However, if he chose DHCP instead of static then ip addresses, subnet mask and etc would be assigned automatically dynamically by the DHCP server.☺
191.168.1.1 is the IP of Router2's interface Fa0/0 which the closest layer 3 device. This is the only IP on the subnet where traffic can be routed elsewhere so if a packet is going to another subnet it has to be sent here.
@@cruzsendy if the switch is only being used for layer 2 traffic, then I agree, but you don't place management on them in your tutorials? Classic Cisco is to set up a management ip on the switches of 192.168.99.x on vlan 99 and set an ip default-gateway on the switch of 192.168.99.1 and apply that 99.1 to a router on the lan segment sharing the switch..
Actually I am trying to send package from pc0 to department E for example or other departments as you did in the video,but didn't get message from CISCO that is successful,I got failed.
1:43 network diagram and LAN config
4:32 Serial link config and RIP
7:45 labels done
7:51 ping tests
9:50 PDU tests
10:25 add server and 2 wifi networks @ 10:53 & 11:27
13:02 fully labelled, final PDU tests
Subnets in order of configuration:
DepA 1:57 | 1.0.0.0 / 255.0.0.0
DepD 2:30 | 128.168.0.0 / 255.255.0.0
DepB 3:05 | 192.168.0.0 / 255.255.255.0
DepE 3:37 | 126.0.0.0 / 255.0.0.0
DepA 4:05 | 191.168.0.0 / 255.255.0.0
Link 4:36 | 10.0.0.0 / 255.0.0.0
Link 4:36 | 128.0.0.0 / 255.255.0.0
Interface settings per router:
Router0 Fa0/0 1.168.0.1
Router0 Fa1/0 128.168.0.1
Router0 Se2/0 10.0.0.1
Router1 Fa0/0 192.168.0.1
Router1 Fa1/0 126.168.1.1
Router1 Se2/0 10.0.0.2
Router1 Se3/0 128.0.0.1
Router2 Fa0/0 191.168.1.1
Router2 Se2/0 128.0.0.3
Hosts:
PC0 1.168.0.2
PC1 1.168.0.3
PC2 128.168.0.2
PC3 128.168.0.3
PC4 192.168.0.2
PC5 192.168.0.3
PC6 126.168.1.2
PC7 126.168.1.3
PC8 191.168.1.2
PC9 191.168.1.3
Server0 191.168.1.4
Hope these notes help someone else. Thanks for a great video.
Thank you very much!
Thanks friend!
Hi sir
Please help me on my project
Mark 😬
This video was a lifesaver fr
Amazing Cisco tutorial I have ever seen.....
👏👏👏
I dont know what legend is until I watch this vid !
THEY ARE VERY PROMINENT VIDEOS
THANKX
Thank You!
Good work keep it up!
+Cauchyf Kan Thanks you.
Dont forget to like, share and subscribe.
sigue asi hermano, llegaras muy lejos!!!!!
Thank You!
Good work keep it up and also i am admire to us
Superb tutorial - thank you. Cool
+Shams Bahri Welcome.
dont forget to like, share and subscribe.
Nice Training Videos !!!!
Thanks ☺. I dont really like this course but i have no choice
I second this.
great video ,keep going!!
Do not hesitate to request a tutorial 😀😁
I need a tutorial on my project can u help
thanks a lot for your information
+Mohan Bhusal Welcome.
dont forget to like, share and subscribe.
very nice , can u add audio on upcoming video . its very useful
thank u , saved my life
Aid Rexhepi ok
Dont forget to like, share and subscribe.
Thank you.
Great job!
I did the same thing you do but the ping from one pc to another pc can't work
very nice thank youu bro
Facing problem when going through routers 🤔 failed showing but working fine in between 2 lanes
Thank you so much:)
Guys, if you required any cisco project visit my channel communicate with me through my website or fb
Very Good...
+Ryan Cool Thanks you.
Dont forget to like, share and subscribe.
Love you bro thank you
Wonderful.
All seem connect but I can't transfer any packet!! Every time I try I lost 100% packet!! Please help me
I tried doing this video step by step but at 7:40 (After labeling) ping tests across computers don't work for some reason, it just says failed and i'm unsure what i did wrong? The routers are configured and lines are all green (Except the lines for the routers connected to eachother)
had the same problem check the ethernet cables with the router so ethernet0 is linked to the correct IP you are using hope that helps
you're the best
Stap 1 (3) Config router 10.10.10.1/30 & 10.10.10.2/30- Stap 2 (2) Op PCadmin set DHCP Bij Desktop Stap 3 (4) Op R01 Set Routing Rip R01 - Network 10.10.10.0 - Network 172.17.1.0 R02 - Network 192.168.95.0 - Network 10.10.10.0 R01 -Router rip -Default-information originate Stap 4 (1) Test PC Console kabel naar Cloud (INTERGATE RT) Terminal Conf t ip route 192.168.95.0 255.255.255.0 se 2/0 ip route 172.17.1.0 255.255.255.128 se 2/0 Server-PT DC02 Services HTTP HTTP on op Bijde
thanks...yu are the best
why this video mute?
You the Best!
Thanks so much
+Adjei Andrews dont forget to like, share and subscribe.
អរគុណ💎
merci a vous amis informaticien
Nice video, thank you. May you please add audio net time ?
very nice thank you
Why can't we send a PDU from a PC to a Laptop and vice-versa? I enjoyed doing your demo, thanks.
It's because of NAT and maybe Internet or LAN settings of the router since as far as I see he did not make any configurations to the wireless routers other than defining SSID and password.
Thanks Oguzhan!
use control when u start using the cable it will go continuous
For that matter, use CTRL + any device = Multiples of that device
Can you make an example with 1 PC and a server connected to a switch, the switch connected with a router, the router connect to a server and the add another router to our last router with 2 PCs?
Get Project at: github.com/zeeshanallrounder/Packet-Tracer
Get Packet Tracer Project from Here: github.com/zeeshanallrounder/Packet-Tracer
thanks jani 💓
@@dev.faizan i s it legit?
So the Routers have no true IP address themselves like the Switches to justify the network, Just the IP table protocol used with the IP's of the switches subnetworks. Do all routers usually talk on the Serial Port lines or if you put then under the Ethernet/Ports then they'd need more difficult IP addressing?
Nice !!
thank you
What type of topology is this?
nice work sir.......next time go a little bit slower tho and try doing some commenting so its easier to follow please
+Stefan Sutherland Thanks you.
Dont forget to like, share and subscribe.
Hi,
Its a nice scenario. Can you tell why we are using multiple router ? isn't the single router sufficient ?
interesting video
Hola, cómo hago para conectar el router wrt 300N a la red y que se comunique con las demás pcs. Tengo el mismo diagrama de tarea y no puedo conectarlo o que pase la información de las laptos hacia las demás pcs.
De antemano muchas gracias por la respuesta!!
Hello im just wondering if you can make a video showing how to support 250 computers
I have to do a 2000 computer network spilt between London Japan and somewhere else...
use a /24 network space. This is capable of 254 hosts. 256 total ips, 254 usable (subtracting network and broadcast).
@@nightfire2015 you can fit 2000 hosts within a /21 network. if you need 2000 hosts per country, then place a /21 in each of them and aggregate the routing to a summary address.
Patrick Mallacoccio can you help me with my project
bro...just you just need to use dhcp for saving time ..!!!
you can have dhcp server or dhcp pool in one router and then just enable dhcp inbound and outbound in other routers
brijen shah so how to make a dhcp for outbond router?
@@shinasadida for hosts on lan connected to dhcp hosting router, these hosts will auto acquire a dhcp lease provided the default-router is their gateway. For those hosts outside of this lan, they can use the ip helper command and set a next hop ip address to the router running the server. A dhcp pool will need configured for that outside lan as well. HTH
It feels like you are already a pro in packet tracer but would you mind to explain, why
did you use the other medium instead of straight-tru and cross-over?
abequil dalaga i think thats something about dce or dte things.
@@shinasadida correct - those are serial connections, mostly used with packet over sonet (POS) interfaces, Serial interfaces, frame-relay setup, PPP, or HDLC connections. This tutorial could have used cross over cables between the routers, but normal WAN emulation is to show a low bandwidth serial connection. At least that is how most packet tracer files are..so its probably habit.
the connection he chose automatically chose the medium for him
5:50 *Why **128.0.0.3**? Why not **128.0.0.2?**? Is there a deeper sense???*
Hi There. I have questions. Is this one Network of 3 routers. Or is this 5 LAN networks that are connected to one another using 3 routers?
Is it true that on router can facilitate up to maximum 2 LAN networks?
The model that u have applied here - which network is this for? Is this for an office network that has different floors or departments or is this just a normal network for different classrooms?
how can connect multiple routers with one router(router0-->router1,r2,r3,r4,r5,r6,r7) how can make static routing..please help me
if you will used static routing,
lets assumed that router 1 network 192.168.10.0/24 (fa0/0 with IP 192.168.10.1) is connected to R2 (fa0/0 with Ips 192.168.10.2) and R2 fa01 with IP 192.168.30.1 is connected to R3 fa0/0 with IP 192.168.30.2
the command should be
in R1 in exec mode.
ip route 192.168.30.0 255.255.255.0 192.168.10.2
in R2
ip route 192.168.10.0 255.255.255.0 192.168.30.1
router 1 2 and 3 fa/0 should be reachable..
if you need actual command how the config works.
email me at royramosherrera@gmail.com
@@royherrera2006 its too bad that packet tracer doesn't support route redistribution to make those scenarios much simplier.. static routing is usable and will work, but real world scenario it becomes unmanageable fairly quickly..
hi sir can you tell the simple project in packet tracer plz ,wired and wireless connection mix
How come when I try to put the IP address and subnet mask in the ip configuration for the PC my professor told us to use I get an error saying it is not the right IP for that subnet mask?
so is this network configured using RIP protocol?
This may be a silly question but how did you decide the ip addresses for the subnets? Like why do some start with 192.. and some with 172.... or 1....?
I just try to use all types of classes.
And to connect all those different classes, need to use routers.
Hi first thx for great tutorial, unfortunately I have a problem with sending message from latops to other PCs, between pairs of laptops is possible to sending message but no to other PCs, where can be problem?
likely a route is missing if you can send on the local lan, but not between lans.
my colage project says i need to make 3 floors with 50 pcs on each... and another with 4 floors and 40 pcs on each... how can i make this quicker.... you just made a 14 minute video using 10 pcs...
CTI WHAT UP! Man, no idea whats cracking with that assignment... please message me if you get any leads.
3 floors with 50 pcs each - would require 3 - /26 networks, the 4 floors with 40 pcs each, would still require another 4 - /26 network spaces (40 pcs is over the allotted 30 host max on a /27, so /26 is next best option at 62 usable hosts),
if the starting block is 192.168.0.0/23, then you can do the following 192.168.0.0/24 for the main block of the first 3 floors - separated into 192.168.0.0/26, 192.168.0.64/26, and 192.168.0.128/26. You would still have a /26 usable at the end of this block. The next block would be 192.168.1.0/24 for the 4 floor setup - 192.168.1.0/26, 192.168.1.64/26, 192.168.1.128/26, and 192.168.1.192/26 as the final subnet. That would get it done - just make sure routing is good to wherever those floors need to go. - HTH
Hey bud, what protocol are you using? EIGRP?
+Dave Doody Just using RIP
why there was a 25% loss? isn't it suppose to be 100% efficicent?
sorry how do u know what is ur serial suppose to be?
for example if my pc 0 1s 199.169.2.2 and pc1 is 199.169.2.3
what would be for my serial2/0? for my router
As bad as I want this to help me with my class assignment. I'm still struggling to understand and keep up....
what is the assignment about? Is it related to some Network topic??
how did you know those IP address. did you compute for it? or just assign randomly?
Gene Deocampo Assigned randomly. because he had declared them as static that means he will have to assign them himself manually and he can chose whatever he wants. However, if he chose DHCP instead of static then ip addresses, subnet mask and etc would be assigned automatically dynamically by the DHCP server.☺
what is the meaning f 0 or f 1 when you connect all devices like switches with p c
That is port slot
@@cruzsendy Please explain more
Why you don't press control to connect all cables?
Thanks..................
Hi. Could u explain me, why did u use defualt gateway 191.168.1.1for server? pls
191.168.1.1 is the IP of Router2's interface Fa0/0 which the closest layer 3 device.
This is the only IP on the subnet where traffic can be routed elsewhere so if a packet is going to another subnet it has to be sent here.
Ane pake Auto cable juga gan, tapi gak gitu gan. saran dong
When I ping a pc to WRT's pc it says failed ... what's the problem with thr WRT? ☹
I fixed it in my part 2 video, please check it
can I ask, what kind of topology is this?
Good
When I try to type in the rip network it just adds the ip 10.0.0.0 no matter which ip I put in. Have anyone experienced something like that?
im just curious what is the role of the server? it seems u just placed it there.why?
My guess is he will set up the server for later use (DNS, DHCP, Web, etc).
Hi mate, according to your project I tryied to ping laptop to pc but it didn't work.
ya i cant ping too.
how did you get the IP address of the switches and PCs?
Switch doesn't need IP
@@cruzsendy if the switch is only being used for layer 2 traffic, then I agree, but you don't place management on them in your tutorials? Classic Cisco is to set up a management ip on the switches of 192.168.99.x on vlan 99 and set an ip default-gateway on the switch of 192.168.99.1 and apply that 99.1 to a router on the lan segment sharing the switch..
do you have vid about the DNS part
Anyone know a mailing list (or something similar) to exchange ideas about computer networks?
Please help me
How to connect laptop with pc.. in there network..?
Whats the server need in your project
Sourabh Sain the server need to add DNS, HTTP and create emails in the second part if this video
I followed each and every step properly still pc0 only pinging with pc 2nd 3 and other are unreachable 😖
its good.
+Akbar Majidi dont forget to like, share and subscribe.
could you please give me the goal of this network as soon as possible
how to send 1 packet to all pc's of other network in packet tracer
Hi! do have a tutorial about a cyber cafe?
what class are u using
***** I used 3 kind of classes
why is that 25% loss for all the pings ???
+Lasitha Randunu I think its ARP. If he pings again there will be no packet loss.
Lasitha Randunu if you ping an IP address.......... first packet will drop that's y it will loss 25% ND if u ping second u will. 0%loss
Sir i am a big fan of you..
I need some help from you..
can u help me..??
mengirim pesan dr Laptop 0 ke Laptop 1 sukses, tapi dari Laptop 0 ke Laptop 2 Failed, kenapa ya?
we call this subnetting isnt it?
what happened to the audio?
On this video is mute sir, later i will add audio
ah, ok. I thought it had audio when I watched it last year.
I have problem with PC's in department E!
What problem sir?
Actually I am trying to send package from pc0 to department E for example or other departments as you did in the video,but didn't get message from CISCO that is successful,I got failed.
Poket traser mobile app kaise use karte hai
Why no sound to explain the steps..
What protocols are used ?
could i did with class C?
it really do be like that
kgane why o sa bolele mon??